DeskJet D2360: Deskjet 2360 - prints wrong colors, even if the test page seems well

Similar Questions

• HP Deskjet D1530 print does not correctly but the test page is awesome

  After using the printer has multiple pages, the following pdf, I tried to print print with less and less visible text and clear the text boxes that are visible are generally at the bottom half of the words.  I printed the test page, but it comes out perfectly clear.  I tried to print other documents, but they are all in print barely visible in the same way.  Suggestions?

  My bet would be a problem with your color cartrdige.  (Some programs such as Adobe Reader can send data to the printer as color to make black).  Print a page of diagnosis as described in this document or the check ink levels in your color cartridge.

• hp4315 is in 22 minutes to print the test page. resolution of the problems of detection without problem.

  hp4315 is in 22 minutes to print the test page.  resolution of the problems of detection without problem.  Using Windows 7 64 bit

  This is caused by the failure of one of your cartridges. I'm not sure that the Officejet 4315 will print with a single cartridge installed, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• officejet1100 HP does not print the test page

  7 the window running. The machine is hp deskdjet 1100, unsupported except in compatible file. Installed compatible driver hp dj 1000. Screen printer. Been the pillar for the test page. tell it to print the test page, order goes into Lake. Printer does not print.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - DeskJet 1100 c - there is no Windows 7 drivers so check with HP
  Support and their forums to see if there are work-a-rounds.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=14499&TaskID=135&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=us

  HP - DeskJet 1100 - support
  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Photosmart C4795 of only printing blank pages - including the test page.

  I have a Macbook Pro IOS 10.7.5.

  WARNING - I have had this printer for about 2 years and it is literally never worked for me. I finally gave up and its been sitting in a closet. I really need to be able to print at home again this is why I'm asking now.

  I have tried all troubleshooting ideas given to me by the HP site and nothing works.

  The printer behaves like its printing but springs from the white pages, including the test page. I connect via a USB port, so I'll make sure that I had a strong connection. I have new black and color ink cartridges.

  Help, please!

  I would check the printer without connecting to a computer first.
  Do not copy work? If copy does not ink on paper, you can be dead cartridges or blocked. There is an option in the menu Tools 'cleaning print head', if that is not printed a page, the cartridges don't work.

• Does not print to the photo tray, but will display the test page

  I have latest driver for Vista, but cannot print on the photo tray.  It won't make the plateau, although it works fine when you print the test page.  I tried different settings of page/paper and "photo tray" settings to turn on, but still not Vista print.

  Tried to 8250 printer properties, change the paper settings, but cannot recognize the settings, even if she sees the book and the test page is printed.  Seems to work with XP very well.

  Connected to an XP machine, printed photo.

  Reconnect the Vista, fooled with the parameters, and then it worked!

  I don't know exactly what fixed...

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• Will not print with the exception of the test pages

  I can't print any document (PDF or Word format) but all the test pages will be printed. The document will show less than a second in the print window then disappears. It doesn't matter if I try to print wireless or I plug the USB printer on the computer.  Also, no Google Cloud Print will print.

  The printer is a Photosmart C7280 all-in-one and computer is a HP Compaq nx7400. I use an operating system of Windows 7 with Office 2007.

  Welcome to the joalrabr forums,

  I understand your Photosmart C7280 print not since your connected PC or wireless USB however, it will print the pages of the test directly from the printer itself.

  First of all, I would like to run the HP print and Scan Doctor. I hope the tool will fix the problem. If it cannot, it will tell you the problem.

  Please let me know the results!

  Happy Monday

• Why an I get the test page yellow and black with each print job. I have a HP PSC 1350

  Why an I get the test page yellow and black with each print job? I have a HP PSC 1350

  Hi - I assume that the page that you see printed is the alignment page.  This happens usually if the alignment process has not been made.  All you should have to do is take the printed alignment page and place it face down on the scan scanner glass and press.  Who must complete the alignment process and eliminate the page printing every time.  If you have problems, try following the procedure described in this document.

  Hope that helps.

• OFFICEJET V40: HP OFFICEJET V40 DOES NOT PRINT THE TEST PAGE

  Printing a test page only prints the top line of the test page.

  This printer work with Windows 7 for me.

  I tried to print a document in word with the same result (only the top line of the document will be printed - and errors)

  UNINSTALLING THE SOFTWARE OF PRINTER DRIVER THROUGH THE DEVICE MANAGER SOLVES THE PROBLEM.

  I HAD TO DO SINCE THE DEVICE MANAGER - JUST REMOVE THE DEVICE FROM THE CONSOLE OF THE MACHINE

  SEEMS NOT TO DELETE THE DRIVER SOFTWARE.  AFTER RESTARTING, I RAN THE HP INSTALLATION WIZARD

  THAT FIXED THE PROBLEM AND TEST PRINT WORKS Thank YOU!

• 1 - How do I print the test page? 2 - How to change the default printer?

  1 - How to print a test page?

  2 - How to change the default printer?

  Yes, essentially the same as in Win 7.   Select the properties of the printer to print the test page.  That's where.

• Artifacts and print wrong colors Deskjet D4160

  My Deskjet D4160 print colors wrong in Normal mode. It prints correctly in optimized mode. For example, it will print rose instead of orange. I saw him print pink instead of blue. It prints very well when it is in optimized mode, but not in Normal or fast mode. I installed the brand new HP inkjet cartridges in the printer of the brand. Also I sometimes get artifacts on the page when you print in Normal mode. At first I thought it was because I used off the coast of brand cartridges, but the same problem occurred when I installed HP cartridges brand as well. If anyone can help me with this problem I would be very happy.

  I'm sorry that you are experiencing this issue. One thing you can do is to clean the head of printing and cartridges on the Solution Center.

  You can also uninstall and reinstall the software and drivers.

  It seems that the communication between the printer and the computer is not on the same page when it comes to color printing.

  I would like to know if these steps help, or what is happening.

• DeskJet F4140: Printer prints wrong colors after updating windows 10

  Hi all

  This is my first post here on the forums and it's a doozy.

  I've updated my laptop last night from 8.1 to win to win 10.  Power seems to work well except my Deskjet F4140 printer. It prints, but the colors are false.  bruises are red, red green, green are "purple", made for an interestng very a first impression. I did all the usual stuff, troubleshooting, test the page clean and align the heads. Uninstall and reinstall to make sure it was getting the windows 10 driver, but alas my problem remains. I tried to find a way to change the mode of compataibility and can't find my file .exe for the printer. I know it's and older printer, but it works like a top and I'd hate to have to replace it because of this problem.

  TLR

  update to win 10 and colors are off like hell.

  Thank you

  Robbie

  Finally fixed my printer not through HP. What I had to do is access the so-called Godmode on windows 10. It allows to access all the parameters of the user as well hidden and non-hidden in one place. I went down to my printer and changed its functioning as windows 8.1 and it works as it should. You should be able to learn more about the Google's God mode command line script. Thank you and good night.

• DeskJet F2280: Printer prints wrong color

  Hello

  I have a DeskJet F2280, when my laptop Lenova with Win 10 printing all colors are OK, but when I plug the printer on my laptop HP with Win10 it prints blue colors in red, in all programs.

  I tried to reinstall the driver but it back no help.

  Can anyone help?

  Arne

  Hi @Arne2,

  Welcome to the Forums of HP Support! I see that you are having problems, print the correct colors, just the computer Windows 10. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try another application, to see if you have the same results.

  I wasn't sure if you meant that you have downloaded and installed the full feature software, or if you use the preinstalled Windows drivers. Here is the link to the full feature software: DJ_AIO_03_F2200_NonNet_Full_Win_WW_140_404 - 4.exe

  If you haven't already done so.

  You can check the settings of the print using this paper driver, HP printers - change the print settings (Windows 8).

  Do not take into account the title.

  You can also download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor?

  Please let me know the results and if there is anything else I can help you. Thank you.

• HP Deskjet D2460: Printer SOMETIMES prints wrong colors. New black cartridge prints SOMETIMES?

  The transition to Windows 10, I had problems with the printed colors.  Recently, I installed 2 new black cartridges and with each had the problem that it does not correctly print black.

  I did a test clean cartridge HP page and it was perfect. Next an Excel sheet printing showed only a few black and the other showed no black at all. (Note that the blue parts are out more purple than blue).

  Any help gratefully received.

  The test is probably print a black event, mixing colors to print a black like appearance. I left I have the link below for more in-depth information.

  Using ink in inkjet printers.

  I always suggest dialing the telephone support to see what can be offered in your case.

  Best wishes