DeskJet 720C: HP Deskjet 720C Page counter?

Similar Questions

• Adusting a dynamic page counter

  I have a headache for a page counter to work in a module. It is a long course - 120 slides - and it has a dynamic menu and a side menu that allows navigation to the different sections of anywhere. It also has a glossary, available from anywhere in the course, which has a back button that goes to the last visited slide.

  I need to change the variable cpinfocurrentslide in-2, to take account of two screens before that the menu (which is the glossary). I created a variable, display_currentslide, that is in a text caption of time during the rest of the project. I have an entry action in the menu that has an expression display_currentslide = cpinfocurrentslide. The result is that it shows the slide 1 of 120 on each slide. I see that the problem is that this action doesn't happen on every single screen - only in the menu. If a solution would be to add this as an action to each screen, above all other actions are already there. It of doable, but would take ages. I also saw method of adding a or subtracting one for the cpinfocurrentslide using the forward and back buttons, which will work very well for me, except that there is a glossary which you can go from any screen in the course. Is there an implementation method that does not involve adding a new action for each of the 120 screens?

  Thank you very much in advance for any advice or tips! I use 8.1 Captivate, completely up to date.

  I suspect that you use 8.0.1.242, because there is not AFAIK available 8.1.

  If you want to have the v_CurSlide variable (sorry for my translation, it's my way of labelling), updated on each slide, you will need to perform an action on each slide, of course. Because this action never changes you can join all the slides in a work flow: select all the slides in the film (CTRL + A on Win) and enter the name of the action in the Actions tab, enter.

  However, I would recommend using a shared action (best for the size of the file), the same workflow because you don't have to do anything a parameter.

  Another tip: why not show the interaction of Glossary for the rest of the project as well and use a toggle the enable/disable button. Much less navigation which will speed up the experience for the user, since you have a long journey.

• PHP/MySQL page counter

  I know, it's a frequently asked question, but I think I have a different condition of most of the samples I found out there on the net, so I thought I would ask some advice here.

  I'm looking to create a page counter that is stored in the database MySQL as part of the record was seen. and I'm not sure about how to go about it.

  I know that I need a column in my table that stores the number of times a record has been seen, but I can't understand how I trigger all first how a record was seen, and then I can not understand how to increment a whenever he saw.

  I really don't want to have a separate table for the meter that I intend to use the info elsewhere where it pulls the whole record info on a page.

  Any thought/tuts/examples/samples are welcome.

  Thank you very much.

  Yes, that's correct.

• Page counter

  I don't think that capacity exists in Captivate 2 or 3 to create an auto page counter, t - it? for example, 1 20, etc.
  
  I realize that a user can see where they are if you use the play bar. However, I create modules that do not include the play bar. Apart from which, it is not very user-friendly to expect your audience to realize that they must click on the playback bar to see how many slides are still. Not what I consider a best practice.

  Hi tichelle

  Take a look at the site of the Adobe Community Expert Paul Dewhurst snowman. You can do so by clicking here.

  See if that is close to what you need.

  See you soon... Rick

• HP Deskjet 2542: Page printing to HP Deskjet 2542 configuration

  Hello

  I've searched for centuries on the support pages to find out how to print the configuration page so that I can get the IP address so that I can get a claim code. I had no chance of finding how do.

  Any help people gratefully received.

  Thank you.

  @laughingmike

  Hi Mike - There is no "claim"code"for this printer.  The printer lacks support of the ePrint, in other words, this isn't an ePrint printer.

  You can still use your printer wireless installation with (at least a part of your) mobile devices.

  Wireles configuration options > User Guide > Section (Page 47) connectivity

  The following is your printer manual > Print > Print Apps section or ePrint Mobile Printing:

  HP printers - Mobile Printing Solutions compatible with HP printers

  Article: HP Deskjet printers > paragraph series printer HP Deskjet 2540

  This document explains and then ordered to you:

  HP printers - Mobile printing with HP AiO Printer Remote App

  ----------------------------------------------------------------------------------------------

  Printing and scanning doctor can tell you something about the installation of your printer.

  Mentioned and download available in The User Guide > fix a problem > Chapter 8, Page 76

  Complete document and download:

  HP printers - help print and scan the doctor for Windows to solve printer problems

  Assuming that the printer is enabled or on your network:

  Download, install and run the print and Scan Doctor

  Let the doctor find your printer on your network

  Highlight your printer > click Next >

  Wait for "selected Communiting with your product...." ">

  See new window showing 'product selected... '. "and your" current "...

  Along the upper Ribbon >

  Click on network > Show Advanced Info

  OR

  Click printer > Show Advanced Printer Data

  OR (if you want to clean / check / align your printer)

  Click printer > printer Services

  ----------------------------------------------------------------------------------------------

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Deskjet 1512 - Page too small / Unknown Error

  I just bought HP Deskjet 1512 all-in-one printer. Installation went normally, however, I can't print anything Windows Vista 32-bit. Here are the various error messages that I get:

  "An unknown error has occurred" - FireFox

  "DΘmarrer can't feel" - WordPad

  "DΘmarrer can't feel" - MSPaint

  "Page too small to print a line" - the notebook

  Another oddity is that WordPad will display only a single letter per line. Microsoft Word displays not only any text whatsoever, not even of previously, working document. Any attempt to print from MS Word results in nothing happens, not even an error message. If I uninstall the printer and then Word, WordPad and all previous documents, poster correctly once more. Only when the printer is installed I see these quirks.

  I tried everything and nothing has solved the problem. I have uninstalled/reinstalled the disks and drivers online. I used the Print and Scan doctor says all right. Checked all cables, rebooted, reconnected, crossed the 50 of the obvious things to check. As far as I can tell everything works; ink, printer, scanner, copy, etc.. I have made copies and scanned with no problem. Test maintenance pages also print without problem. I suspect that the problem is the printer drivers for Vista. For some reason, it says page is too small, so clearly I have paper loaded into the machine and selected letter size in the main tray.

  Is there something that will fix this problem? I may need to return to this unit and back to Canon.

  Finally, I returned the printer for a refund. Thanks for trying RnRMusicMan

• test to get printer hp deskjet 450 page error when printing under os 64 bit of windows 8

  I can't get my hp deskjet 450 printer to print a test without a notification of error page using 64-bit windows os 8. Help!

  This kind of non-specific error makes it a very difficult problem. I can only recommend that you ask in the forums HP here:

  http://h30434.www3.HP.com/PSG/

  If not, contact HP directly for assistance:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  (check if there is no cost before proceeding).

  Good luck.

• OfficeJet Pro 8620: Officejet 8620 page count

  Hello

  I'm tryingto check if this machine has a counter of total pages, so that I can control my use? Please let me know how to find out.

  Thank you very much

  Jerry

  Jerry Hey,

  There is no such an option, which can only be tracked manually.

  If the printer is connected via network you can collect this information from the homepage of the printer without printing a report.

  The HP Officejet Pro 8620 software click the printer (EWS) homepage and open the Tools tab, the Total number of pages is listed on this page. any follow-up however will have to be done manually.

  Shlomi

• Page counter reset after firmware update

  Hello

  I have a problem with our hp laserjet P2055dn printer and I hope someone can help - HP support didn't!

  After the last Firmwareupdate (20090430 20120615) complete counters are set to 0 - I just couldn't believed, until I checked the other witch printers (5 of 20) have been updated - so, 0 Pages printed.

  We need the counter for the calculation of the Interior, a kind it's horrible that the meter is lost. I ask HP-Hotline I can do it, then she said "the problem is unknown...". Why do you need the meter, there is no need... » !!!

  OK, in the web, there are many pages, exactly to this problem - they use PJL commands to reset the printer. I tried, in vain.

  My last hope is the forum here, that someone had the same problem and solved successfully - so please let me know, how you did... :-))

  Greetings

  Thomas

  IT DOES NOT COMPUTE!

  Bevore I give up - the beast in me force me to make an attempt more... and surprise it does not compute.

  What I have is:

  1. connect the printer and do a share (hp-2055)

  2 redirect the port LPT1: to the part (net use lpt1: \\Workstation-IP\hp-2055)

  3. Send copy LPT1 command ESC (ESC%-12345X@PJL), the ESC is generated in the BACK with CTRL + P + ESC

  4.

  @PJL SET SERVICEMODE=HPBOISEID
  @PJL SET PAGES=15025
  @PJL SET SERVICEMODE=EXIT
  @PJL RESET
  

  5. send again the ESC (ESC %-12345 X) part

  6 print the config page and get a big smile :-))

  In this case, the PAGES are entered decimals - no change in hexadecimal is necessary, also a value greater than 200000 was successfully set.

  Thank you very much, it was heavy (just for me...)

  Best regards

  Thomas

• Page numbers: how to ignore all other pages count

  I am trying to create a large number of postcards with sequential text following on the back of each postcard, who holds a master's degree 'B '. I want to add a paging option in the master which only has the masters 'B' pages, or side text of postcards. It is a very large document, so it would be nuts to proceed manually to each page.

  I tried everything in the page numbering to the point that I can understand, nothing helps.

  I looked at the list of styles to paragraph numbering option, but this would require the addition of a paragraph on each page. I need to do this at the master, in part because the numbering is integrated in a line of text that has also a section-based numbering and adjust according to the length of the number of grains.

  I know I could do this by creating two separate (one for the image-side) InDesign documents and one for the text to the side, export each PDF and recombine. But due to the large number of pages and other pains in this workaround, it's highly undesirable.

  In addition, this seems to be something really obvious, which I imagine others need before. Yet despite finding a ton, I could not find a solution. Am I missing something obvious?

  Thanks a lot for your help!

  

  Try this:

  -title of the folio mp text frame script

  Define slabel for a "a folio.

  Tell application "Adobe InDesign CS6"

  -a meter

  c Set to 1

  -check each page for mp items labeled folio and substitute

  Repeat with x in each page of the active document

  -replace the existing elements of MP

  Try

  delete substitution (point 1 of each element of x page whose label is slabel)

  try to end

  mpfolios the value of the elements of x-master page

  Repeat with i in mpfolios

  If i label is slabel then

  I have replace the destination page x

  end if

  end repeat

  -Add 0 s leader

  the value of nc from characters c (as string)

  If the nc is 1 then

  the value folionum to "00" & c have thong

  Otherwise, if the nc is 2 then

  the value '0' & c folionum have thong

  on the other

  c the folionum value as string

  end if

  -define the content of the folio to the counter string text block

  Try

  the value (point value 1 of each page element of x whose label is slabel) folionum

  set c to c + 1

  try to end

  end repeat

  tell the end

• HP 6500 has more - report Page Count/use Reset

  Is there a way to reset the Page to print the State of County-to-use?  I tried a "Factory Reset" in now the # & 6 while putting off tension.  This doesn't seem to work.  Looking for assistance.

  Thank you

  To track the amount of pages that I get installed the ink cartridges.  I see however in detail

  printer report the quantity of pages and when the ink cartridges were installed.

  Thank you

  Mike

• How we can print the page numbers for the shape of the TABLE OF CONTENTS when her excluded from the form page count?

  Hi Experts,

  We have the TABLE OF CONTENTS, followed by 100 forms totally 215 pages.

  We checked in the exclusion of the option of number of form page SUMMARY form at the level of the group.

  Followed forms of TABLE OF CONTENTS forms all use FORMSETPAGENUM rule at the bottom of page.

  the first form followed by TABLE OF CONTENTS form the number starts page 1 of 215 and the last form closes at 215 215.

  Now, I want to print the Page number of SUMMARY form only.

  How can do us?  Any thoughts?

  Kind regards

  RAMAN C

  Hello Raman,

  I guess that you included "Exclude the number of pages" option in the form of table of content (TOC).

  There is a limitation in the studio. The functions of page number (PAGE NUM OF FORM / FORMSET PAGE OF NUM) will be ineffective when we choose the option "Exclude the number of pages" in the form of table of contents. Therefore, you was not able to print many pages of form as a table of contents.

  The only way to print the number of pages is to deselect the option "exclude the number of pages. Then you can print the number of pages in the table of contents in the form of table of contents normally. However, this number of pages in the table of contents will add to the Total number of pages form set. The number of pages all forms can be controlled by Postransdal using the script [FORMSET PAGE NUM = TotalPages() - 1]

  Kind regards

  Mahesh

• DeskJet 1512: How mover, page and other information of printed pages?

  This must be a simple process; but, how remove the printed title, the page, the date printed on the DeskJet 1512 pages? Thanks for any help!

  Hi usafirechief,

  What type of program you are using to print? You should be able to remove this information by adjusting the settings within the program.

• HP DeskJet F380: HP Deskjet F380 print pages in the wrong order

  By printing on both sides manually, I often use odd/even pages options to print more quickly than the management of every page on its own. However, with this Deskjet, my pages and pages of documents THAT ALWAYS get messed up would be in the sequence of sequences in a weird order break; lose my ink and my papers!

  How can I fix it? This has happened far too many times

  Hi @Itsyvonnely,

  Welcome to the Forums of HP Support!

  I understand you have some problem with the pages print is not in order when you use the manual duplex function. I will definitely do my best to help you.

  What program are you printing from?

  Try to print a document duplex from another application.

  If you are using MS Word, I suggest you repairinging software, How to troubleshoot print failures in Word.

  To check the printer driver, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  To see if the driver software is up-to-date, d download and run The printer installation wizard The HP printer wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10. 

• HP Deskjet D1660: Cannot install printer or Scanner, does not meet the min requirements

  I recently spent computers, from Windows 7 to Windows 7 Professional, and I seem to have install my HP Deskjet D1660 and my scanner, a HP Scanjet G4010 of questions. Both gave me the same problems.

  When I connected my Deskjet, my PC tried to install the drivers from the usb port. He reconizes as a device, it could not install the drivers. Then, I downloaded the program core facility for the Deskjet (DJ_SF_06_D1600_NonNet_Basic_Win_WW_140_175.exe) and follow the guests.

  The installer is never far away and from the beginning, I get a message screen for the system demand for results, indicating that my computer is missing, the USB drivers and a USB device. I had exactly the same result when I tried to install my Scanjet.

  The screen looks like this:

  

  And like this:

  

  I checked my registry and my USB is enabled, so I'm not entirely sure about the problem. Also, I went through the troubleshooting to the Deskjet printer page. I tried disconnecting / reconnecting the cable USB from the printer and the computer. I made sure automatic updates is turned on. I made sure that all updates are installed. I tried to run the installer with virus protection disabled. I tried to run the installer with the firewall disabled too. I even went through the devices Manager Wizard to add the printer this way goods instructions on the troubleshooting page, but no dice.

  I'm really just scratching my head on this one.

  In regards to recent software or driver changes, I mean the computer is new. I've been slowly installing programs, that I used on my old computer, but they never have interefered with the printer or a scanner working previously.

  I use a wireless internet connection.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi