DeskJet 990Cse 2 - ded printing in Win 7 64 bit

Similar Questions

• Sharing a Kodak printer between win 7 64 bit and vista 32 bit

  I have a kodak esp 3 printer connected to a vista 32 bit desktop pc. I share this printer on a wireless network in my house. I try to print from a laptop 64-bit windows 7, but failed to add this network printer to the computer windows 7. I think all I need are the x 64 drivers and add them via the systems vista printer properties.

  We now print by saving the document in the "Shared Documents" folder of mobile access and then print from the vista machine.

  After three long chat, phone and e-mail conversations with the technical support of kodak, what they say is this printer can't print wireless.

  They do not understand, it is a shared network printer, and I'm not trying to print directly to the printer via wi - fi, because I know that that does not support this printer.

  Any help, advice or where I could get a kodak 64 bit print driver would thank you very much

  
  

  Hi, I had not checked on this for a while, I couldn't get anywhere with x 64 drivers for Kodak for us would simply send documents on the Vista desktop, and then print them. So finally last night I upgraded the Office to Win 7, the upgrade price on Amazon is great-now $89, all problems are solved, put in place a homegroup print, share files and listen to music and video. Big difference in the performance of old desktop of 3 years. I should have done this 6 months he is a. sorry I have no solution to the original problem. Thanks - Matt

• Installing the printer on Win 7 64 bit and D-Link DPR-1260 print server

  I have been using a print server D-Link DPR-1260 to my home network for more than 1 year. The computers were all run XP XP3 32bits. When I upgraded to WIn 7 64 bit, I have problem printer installation. Both printers are Samsung scx-4521 laser MFPS and laser color CLP-315. The drivers are already installed on my computer and I was able to print if they were directly connected via USB. I also could see DPR-1260 and the printer. But installation stopped, because it was not able to find the proper drivers. It's strange because I was able to print via USB. Help please. I have not upgraded other computers even though I only install the 32-bit version instead of 64-bit for others.

  I tried this fix as well, however it allows me to select the folder in which I think that the pilot is located inside.  Basically, it can not find the 64-bit driver... alternatives?

  to connect to the d-link printserver 1260, you have to treat it as a network with a device server. Here's what you will need the name of the print qeue and ip address. and a COMPATIBLE printer, who is in the list of d-link1260 that they have a better list on their Web site... www.Dlink.com
  ' 1. goto devices and printers "in the start menu
  2. at the top click on "Add a printer" If you can't find it in the list of devices below.
  3. then choose "add a network printer".
  4. next hen click on 'stop' click 'the printer that I want isn't listed.
  5. Select 'Add a printer using a tcp/ip address or hostname' click 'next '.
  6. Select the type of device and enter the ip address be 192.168.0.xxx, a window will open and ask more
  port information, click on "custom" at the bottom.
  7 when the sub menu opens choose "LPR" and then enter the name of the print queue of the printer I also checked "bytes active cash LPR" click 'next' you should not do this. that is my name of the queue was ml-2010. You can get this in the dlink1260 configuration page.
  8. the next page will ask you to printer driver. If the list is not current, then 'windows update' first try the updated list for the models more that it will take a few minutes will be patient.  or you can try the driver for the model that you ever I recommend download the latest drivers from your manufacturer... Select make the printer on the left and the right MODEL. then click Next
  you're done if you can print a test page.

  his best guys to assign a static IP for dpr print server 1260 and lock it in the configuration. also book this IP in your router configuration. for 64-bit systems a lot of pilots was not yet available from this list you can get them now. I suggest using BASIC pilot not those in a package with all demonstration... are HP most likely to be used in the configuration of this installation as I said in the beginning make sure you have a printer supported by the list of compatible printers found here dlink.com veryfying...

  http://www.Dlink.com/products/default.aspx?pid=DPR-1260&tab=3

  Goto the 'FAQ' section and see the list of printers. and more details on the installation manually this configuration and settings for most editions of windows.

• HP Deskjet 9650 does not work in Win 7-64 bit

  I have a HP Deskjet 9650 that doesn't work with my new computer. I am running Windows 7-64 bit. I downloaded and installed the driver (9800) recommended alternative. I am told that it is installed properly and everything is fine but does not print the test page. No bells, whistles or flashing lights, just nothing! I paid a lot of money for this printer and I wish you to use! Oh and another thing, it works fine in XP mode.

  Hi thomaslueer,

  Try the steps in the following article and check:
   
  Method 1:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Method 2:
  Make sure that the Printer Spooler is set to Automatic, as to enable the services of automatic.      
  i. search the Printer Spooler service.
  II. right-click on the service.
  III. If the service is stopped and then Start the service
  IV. Select Properties.
  v. Select Startup type automatic.
   
  Hope this information helps.

• "Windows can't open add printer." Access denied error message. "When I want to add a printer for win 7 64 bit OS > see details below

  I can't reinstall my printer Epson WiFi is on my network. I recently installed a "update package" published on 11/04/2011 Epson. I have a HP Pavilion laptop g7 with windows 7 64-bit OS. I can't go back to "System Restore" to the date of my installation of update. I have an another HP laptop also on the network, and he has no problem printing. I reinstalled the Epson printer so I can print a page of the Epson, but windows does not recognize the drivers I am not able to print anything else. I can not add the same "a Note" as my printer because of the error message "Access denied" mentioned above. I have tried to install using the disc to Epson, and then after uninstalling all things Epson I installed on the Epson site. Note: I'm on the same network "workgroup" as the other laptop, however, when I go to my computer > network it shows 2 laptops, devices, multifunction, Network Infrastructure devices, printers and Scanners. The only difference between the 2 laptops in this area is that mine shows 'Gateway Internet' in the 'Network Infrastructure' and the other laptop shows router WiFi. Any suggestion would be appreciated.

  Thank you. dlholling

  Hello.

  Try to Foillow the steps...

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/thread/d0e13543-30fb-41bf-ba5c-8c2db34f3023

  This will help.

  Thank you

• Could not start the print of Win 7 64 bit spooler

  Hello world. Earlier, I installed Windows 7 updates (I can't remember the exact date) and when I tried a few days then to print something, I could not and my printer had the yellow flag of problem in the control panel. It seems that there is a problem loading the print spooler after trying to start it, I get the following error message.

  Windows could not start the service on local computer print spooler. Error 1053: the service did not demand launch or control in a timely.

  The printer has been tested on different computers and a laptop and works very well. After some research, I found many messages on the same problem as others have some and tried all of the solutions posted here, but nothing seems to work. All the drivers are up to date, all dependencies of print spooler are running, I even uninstalled Adobe reader and I use a different now. The printer is now just an expensive paperweight. Any help would be appreciated. Thank you.

  IEBHO.dll seems to cause problems with some applications.

  It cannot be linked to questions of print spooler.

  However, I suggest trying to remove the IEBHO.dll which seems to be one part of iMesh MediaBar.

  You can uninstall iMesh MediaBar using "uninstall a program"?

  I also run a scan with the two following applications just to see if they do anything:

  TDSSKiller:

  http://support.Kaspersky.com/FAQ/?QID=208283363

  Malwarebytes anti-malware (free version - decline the invitation to install the full version of trial) - do a "Quick Scan":

  http://www.Malwarebytes.org/products/malwarebytes_free

• experienced problems for a HP Deskjet 1000 c printer to print using windows 7 64 bit

  One known problems get a HP Deskjet 1000 c to print using windows 7 64 bit. I have updated the drivers for parallel port and a printer. the computer recognizes the printer is there, but no documents will print.

  HP provides the drivers or software for this printer.

  It uses the built-in drivers obtained through windows update

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c03460648&CC=UK&DLC=en&LC=en&os=4131&Product=61601&sw_lang=

  If your PC does not have a PARALLEL port and you use a converter, this method is often problomatic

  If your PC has a parallel port, then the motherboard must be of an age that is probably not entirely compatible, not with orders other bottlenecks card mother win7

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• HP Deskjet 990cse inkjet printer

  I have a HP deskjet 990cse printer.  The problem is that I have office 2010, I'm not able

  to print using the duplex on the printer option.  I have to use the manual option in Word and in
  Editor forget about trying to use the printer at all because the second page is upside down.  my e-mail address
  is * address email is removed from the privacy *.

  Please don't mark a message as the answer unless it solves your problem.  I recommend that you stand out my answer as the answer, since you do not believe that your question.

  I gave you a very honest answer.  Why would I lie to you?  Remember that the people who answer the posts here in general are not Microsoft employees, and none of us are mind readers.

  How is it 'round robin' to send you to a web site dedicated to your device?  You never said you had been there already, so it is impossible for me to know that I sent you to a site that you visited.

  You left out the information in your original message because you posted in the wrong forum and never bothered to tell which version of Windows you are using.  HP provides drivers for some windows, but not for all.  If you use Windows 7, HP does not provide a separate driver and that includes Microsoft is not as complete would be a driver from the manufacturer of the printer.  Your problem isn't with HP, Microsoft.

  If you are using Windows 7 and HP offers a driver of all the features of WIndows Vista, try it.  Many writings of drivers for Vista works on Windows 7.  Simply create a system restore point before you try so that you can come back if there are any questions.

  Like it or not, that is the best answer I can give.

• Cannot print in Win 8 and Excel 2013 Deskjet 3000 USB plugged - resolved

  Hello

  Newly installed computer running win 8/64-bit and Office 2013.  Have Deskjet 3000 USB printers.  Last driver HP and the latest installed MSFT.

  Searched for this problem and most seem to be reoslved by changing the print quality settings, I tried all project photo and same result.

  When I print from Excel, I see my spreadsheet in the Preview Print print area is correct.  I click on print and if I quickly change the status of pinter I see document number go from zero to 1 and then back to zero what any windows spooler.  I also changed printer for any coil.

  I have no problem printing form other applications Office Word and PPT, or Adobe Reader or my browsers.  Just in Excel.

  Don't know where to go from here? I ran the HP diagnostic tools and they work very well and that you can get test pages printed on them as well as Windows itself.  No error messages at all when the problem occurs, the print file seems to disappear.  I can print in a file from Excel and then print this file if its PDF without problem.

  Very mysterious!

  Thank you

  OK update:

  I removed the HP software and driver and simply use the native Windows 8 driver and everything is wonderful.  Seems strange that doesht mfg driver work but the Windows version only.  All that I know is just remove any HP software and the driver and just take the default of WIndows and life is perfect!

  Hi rich, happy to hear that the problem is now resolved, thanks for posting back with update

  

  Ciara

• HP Deskjet 3420 does not work with Win 8?

  Hi all!

  I am facing a lot of problems with my printer (Desket 3420) that doesn't seem to work with Win 8. I installed it first with the 'old' drivers supplied with the original CD, and then, when I discovered the problems of compatibility, I tried the Deskjet 3600 drivers provided by Windows Update.

  The printer seems to be properly installed and "ready" (if I can see in Control Panel), but every time I launch he grabs a sheet and seems to start printing but awkwardly, with characters bad and extremely slow, even if I set the option "starts printing immediately" or, Alternatively, "start printing when the coil is complete! Also when I try to delete a document in the print queue, it seems not respond!

  Can someone help me find a solution? There is the chance to use this printer with Win 8 or I have to buy a recent news?

  Thank you for the support.

  Hello

  As you can see below, I'm afraid your pritner is not compatible with Windows 8:

  http://support.HP.com/us-en/document/c03457812

  Shlomi

• DeskJet 2050 does not print post format more?

  Hello

  DeskJet 2050 all-in-one

  Win 7

  I had HP printers for years and all my other printers had a setting in the sofrware who would let you print impressions in format post on multi sheets of pf you would then tape together. I find that on my new printer. I used this setting a lot and now find I need it again and I don't know what to do?

  Susan

  Hi Susan,.

  The print feature post is more provided by the most recent drivers.

  However, you can still use the feature using an Alternative driver as a workaroud:

  First step: check the current printer port.

  Enter Control Panel > devices and printers.

  Right-click the printer icon, and then click printer properties.

  Click on the Ports tab, and take note of the track selected for your printer.

  Step 2: Adding a pilot alternative:

  Enter Control Panel > devices and printers.

  Click Add a printer.

  Click Add a local printer.

  Leave the Port of existing use marked, select the port used by your printer from the drop-down list, and then click Next.

  Click the Windows Update button, leave a few minutes to complete the update process up to what the list printers appear again.

  Select HP in the Manufactor Colum

  Select HP Deskjet 6940 series / HP Deskjet series 6980, and then click Next.

  Follow the steps to complete the wizard and then print using the configuration newly driver printer that includes the desired option.

  Kind regards

  Shlomi

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• HP DESKJET INK ADVANTAGE 1515: To connect the HP DESKJET INK ADVANTAGE 1515 printer device to multiple computers.

  Mr President, I have HP DESKJET INK ADVANTAGE 1515 PRINTER I want to connect to my two computers with all FIRST Windows XP and the second having Windows 7 operating systems. Kindly help me to do this in detail...  THANKS IN ADVANCE

  What's your plan for the connection?   It is a USB printer only, no network connection.  You can connect to a computer and then enable Microsoft File and print sharing on both computers.   Or if your router has a USB port that supports printers CAN operate when connected there.

  Those are your options.

• HP Deskjet 1112: HP Deskjet 1112 does not print

  Recently, I bought a HP Deskjet 1112. It prints very irregular and I can't seem to understand the problem.
  
  Here's what I've tried so far:
  
  (1) turning and turn on the printer
  (2) turn the system off and on again spooler (using Windows + R, typing in services.msc, turn off the spooler, then by disabling the that and turn it back on)
  (3) uninstall and reinstall the software (this is what the printer Troubleshooter told me to do)
  
  The convenience store told me that is missing a driver, and he also says that the printer and the computer communicate well. I wonder if it is a question of rope? In addition, I do not know what a driver is so I don't know how to check if it is operational.
  
  Help, please. I'm running out of ideas for now thanks in advance!

  Hello @humblebee,

  Thank you for showing your interest in the HP Forums! I see you have printing problems constantly. I would like to help.

  Try the following steps to see if they will solve this problem: printer is offline (Windows).

  If you still have trouble, let me know the results of printing and scanning doctor.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!