Deskto Phoenix 810-160 HP ENVY: optical audio output jack

Similar Questions

• HP ENVY Phoenix 810-160: HP ENVY Phoenix 810-160, no video at startup, on occasion

  When you press the Start button on my new computer, quite often it has no video for my screen output even if the computer turns on and seems to be running.  I must shake the switch and sometimes even put it off, and then turned to get video output.  All ideas, this is a new computer and I can't wait to send it back, but don't want a constant problem?

  It is a hardware problem and must be sent for repairs.  Talk to them first, you may just send the rear monitor.

• HP Envy Phoenix Deskto 810-160: HP Envy 3F6 Office Boot Error at power on

  I have a problem of problem with my desktop HP Envy Phoenix 810-160 to initialize.  1 TB HDD and SSD 16 GB.  Originally Windows 8 and put to update with 10 "free" Windows OS

  Back after a 13-day trip and got the hard drive error (3F0).  UEFI Diagnostics tests all passed several times.  After the passage of parameters of the BIOS back to default settings, error changed to 3F6.

  Whenever I start now, I almost immediately get the blue window Hard Drive Error (3F6). I hit F2 and go to the Diagnostics.  Ignore the coming out by... the computer starts - but very slowly.  Later works perfectly until I stopped him.  Takes a long minutes to finally stop (all lights out).  Computer is 30 months old.

  My 16GB SSD NO appears in Device Manager, but NOT in Solution Explorer.  In Windows 10 disk management, the SanDisk 16 GB SSD presents itself as shown in the red circle icon with an arrow pointing down, 14.9 GB, disk 2, unknown, uninitialized and 14.91 GB unallocated.  I thought it was supposed to be the startup disk 'rapid '.  I'm afraid to "initialize" this SSD lest I could format it and lose what is on it.

  Can you HELP me?  Don't you think that the SSD does not work as it should?  If it's the "Startup disk" How is that windows starts in all?  Uninstall physically the SSD drive would help?

  Thanks in advance, Bill

  Hi @dynaquest1,

  Thanks for the reply.

  Because the operating system is installed on the main hard drive and the PC works well. You can go ahead and install the player mSATA with no configuration is required.

  I hope this helps.

  Kind regards

• HP ENVY Phoenix 810-160: I can't get the sound to work

  I just got the

  HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work.  I use it with a HP Envy 23 inch monitor which also has audio Beats and a HDMI cable connection.  I went through all the steps on the support page of the monitor and desktop support page.  Any help out there?  Thanks in advance.

  Hello

  No, it's going to work, you can not connect computer Office AiO 23 and get a sound of the AiO 23.

  Kind regards.

• HP Envy Phoenix 810-160: give up WiFi

  I have a HP Envy Phoenix 810-160 that I bought in April of 2014, it came with loaded Windows 8.1.  It has a Broadcom BCM4352HMP 801.11 ac 2 x 2 Wi - Fi adapter.  It maintains abandon the connection. I have install the driver is 6.30.223.170 from 09/06/2013, I tried updating the driver and it says my driver is up to date. When I go to the available networks list my network is listed under the power of the full signal.  It does not connect and says that it can't connect.   I turn on/off the device in Device Manager and reboot, then I get anywhere from two minutes to an hour or two of functionality so that it falls new.

  I'm going through HP and widows forums forums all day looking for a solution.  I followed all the troubleshooting steps I found on the HP and Windows forums, but none were specific to this model PC and a wireless adapter.   The only step I have not tried it replace the adapter.  computer 8 months, I want to buy a new card from the computer.  As it is connected to the internet from the computer, I received, it's only this morning December 26, 2014 that the connection has begun to wane.

  I tried to update the driver, uninstall and reinstall the adapter off the blue tooth adapter, currently if I toggle the device once in a relationship and reboot, I get a time where I stay logged in, but eventually, he abandons the connection again.

  When I turn on the computer the little indicator white wireless on the front of the computer lights up almost instantly.  I see my home network with the power of the full signal and two laptops and my Iphone right next to the computer to connect to the same network with full signal strength.

  Hello:

  This is the latest driver W8.1 I could find... 6.30.223.227

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-139598-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0002

• Want to Phoenix 810-160: USB controller driver

  I need the driver for the USB controller to a Phoenix 810-160 desire. the system motherboard is a worm MS-7826 1.0, the device in the "other devices" section manager said there is no driver installed.  I tried all the usual bugs, uninstall it, restart, update driver etc. nothing works.  Working USB 2.0 ports 3.0 ports do recognize not all devices, but they will slow down load a cell phone when it is connected so that they get the power. Thanks for the help

  Hello, go to http://support.hp.com/us-en/drivers/selfservice/hp-envy-phoenix-810-100-desktop-pc-series/5399342/model/6529902

  Download USB Intel under section (sp65142) Chipset host controller driver and install.

  If it does not please post since the Device Manager hardware ID to find the suitable driver for you.

• In the new Apple TV, there is no optical audio output how we can use tv with music

  MY new Apple TV dosent 4th generation has an optical audio output then, how can I use it for my music without starti tv wire

  You can get adapters that have HDMI in and HDMI and optical output, like this.

• Genesis 4 Apple Tv doesn't have an optical Audio input jack.

  I just replaced my generation 3 Apple Tv with a generation 4 Apple Tv.

  The Genesis 3 has an optical Audio input jack that I used to connect my Bose system.

  The Genesis 4 doesn't have it.  Now I can't audio through my Bose system.

  Any suggestions?

  Use something different? I have read there are some cards, but you are right, that the v4 of the Apple TV doesn't have an optical port.

• Apple TV4 - what happened to the optical audio output?

  I can't not all sound thanks to my new Apple TV 4 to the Bar SONOS Play which is hooked up to my TV Sony Bravia KDL - 52S 4100.    But my Apple TV 3 offer a perfect for the SONOS via port Audio perspective of the Apple TV 3 (which Apple seems to have failed on the Apple TV 4).   Apparently a number of TV top of range before the era of "Smart TV" does not deliver audio via their HDMI ports.    This failure to design was easily corrected by connecting an optical cable between the port of the Apple TV Optical Audio in SONOS optical input Port.    No Apple eliminated the possibility to connect a SONOS in this latest edition of the Apple TV?    .

  probably the deleted the connector because they judged little used

  You can file a complaint with their return path

  http://www.Apple.com/feedback/AppleTV.html

• How can I get my optical audio output to work on my TV?

  I have a 50A 2020 Sony KDS and trying to get the audio out to work. IM got a Roku for Christmas which works very well. I connect via HDMI to the roku to TV which works fine. My problem is I want the sound to come through my receiver and speakers instead of the TV speakers, so I ran an optical cable from the Audio out on the back of the TV to the receiver. the problem is that it does not work. What do I need to enable something somewhere to tell the TV to send audio out via the optical cable? I don't want to spend hundreds of $ on a new receiver...

  Thank you for your post and welcome to the forums.

  Unfortunately, this generation of TV doesn't have the function to send the audio using an optical digital output to an HDMI input. Work optical TV when you use the TV tuner because it only works for digital channels. I understand the Roku doesn't have optical or coaxial, so you may have to buy a receiver that has HDMI in and connect the Roku and HDMI on the receiver to the HDMI on the TV.

• HP Envy Phoenix 810-160 Deskto: upgrade Windows 10 recovery disks

  When I bought this PC, I made the recovery discs immediately.  I later upgraded that PC of 8.1 Win Win 10 back when Windows 10 was a free upgrade.  If I have all the important issues in the future that may require a full restore, I prefer NOT having to go back to 8.1 earn and have buy Windows 10 to get back to where I am now.

  Is there a way to 'redo' recovery discs now so that any future recovery back me to Windows 10?

  Thank you!!

  > I prefer NOT having to go back to 8.1 earn and have buy Windows 10 to get back to where I am now.

  Because Windows 10 is installed on your computer, Microsoft has a "fingerprint" of your hardware,

  who gives you the right to re - install Windows 10 without having to buy a product key.

  > Is it possible to 'redo' recovery discs now so that any future recovery back me to Windows 10?

  Yes.  Or, if you have an empty 8GB USB - memory stick, you can write a copy of Windows 10 to it.

  See: https://www.microsoft.com/en-us/software-download/windows10/

  for a free download of Windows 10.

  When using this media, click on 'I don't have a product key' and the 'right' will allow you to continue with the installation.

• Want to Phoenix 810-160: Jacks Audio does not

  The audio jacks on the front and the back of my pc use to operate. But now when I try to play sound through my speakers, that they do not work. So I tried to forget the audio device, but now my speakers do not even appear on playback devices. I also tried to use a headset to make sure it was the audio jacks on headphones did not work either.

  @New_Guy1,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  Thank you for visiting the Forum from HP Support.

• HP Envy Phoenix 810-160: hard drive crash?

  Hello

  My desktop computer has been acting lately. Before start time allows to be very fast, but now is the time to start take much more time. Then when I want to start the computer, it looks like not detected media presence and try to start on the network. I looked online and saw that a solution to this was to rearrange the order of startup, so I made sure that windows boot Manager was the first and followed the online instructions to disable startup by network. Now when I try to start, I get a screen that says don't: no operating system installed on the hard disk. I then ran a test drive that has no hard drive. Then I restarted the test and drive past. So my best option to replace the hard drive? In this case it is the disc ssd of 16 GB to be replaced or the 1 TB hard drive?

  Thanks for your help

  @New_Guy1, welcome to the forum.

  It would be your primary hard drive (HDD) that needs to be replaced.  The SSD is simply used as a cache for the HARD drive.  You should consider to replace the HDD with a SSD.  The increase in performance is amazing.

  I have a HP 860-170vr Gaming ready desktop computer.  It came with a HARD drive installed.  When first started, I couldn't believe how slow it started.  I installed a Samsung EVO 840 500 GB SSD, I had bought earlier.  It made a world of difference.  If you buy a HARD drive, it should be the same size or larger than the one replaced.  This is to ensure that the Recovery media will work.

  If you decide to go with a SSD I suggest Samsung.  They seem to work best with the HP BIOS.  I'll be happy to tell you the best way to install it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Envy Phoenix 810-160: graphics card update

  Course record:

  POWER SUPPLY:

  Inside 600 Watt (100V-240V)

  Hello

  first of all, I must say that your pc, fortunately, supports UEFI so that this card should not be a problem

  However for the card to work or to initialize with the pc, you need to maybe disable secure boot and go to the support of legacy. (this is what you need to know about what you heard on legacy mode)

  If I can guide you through this, for details and graphics during this visit the hp support page on the bios settings

  as for the question of the guarantee... If you are still IN the warranty period, opening manually to the top of the Cabinet would mean breaking the seal at the bottom of the pc... only the limited warranty of hp then apply... spend your license information and warranty before doing this...

  come to the 'best' part... it is an adjective and depends on your perception of and how much you can spend in the pursuit of it...

  a solution of 2 gtx in sli/crossfire mode 970 would be as powerful, if not a little more of the x... purpose of titan that would need a power 750 w... once again, the 980 is better that the 970 by a large margin, but nearly twice the price... a 600w will be enough for either, although

  hope that answers your questions

• 810-160 Phoenix envy: envy phoenix 810-160: try to install Win10 after BSOD and format; drivers not found

  A few weeks ago, I got the BSOD and could only reformat without saving. After a data recovery service ravaged my hard drive, I bought a new drive. My recovery disk is not found (my guess is the woman she pitched in one of his fits of cleaning). Of course, I have to re - install the operating system and bought Win10 home.

  I plugged the USB and started the installation, but now get a message that no driver device were found. It is a pain, but it makes sense. Went to the website of HP drivers on your laptop and downloaded all the drivers, it produces for my specific model.

  Where I'm stuck:

  I have a pop up that says "Windows Setup" and "Select the driver to install", with a window not populated. I plugged my USB key containing the drivers and found him - USB key (H.) I chose this drive and the folder where I placed the drivers. Click OK and I get the message "no device driver has been found. Make sure that the installation media contains the correct drivers, and then click OK. »

  If I have the drivers provided by HP and they are not recognized, how do I proceed?

  Hello:

  Make sure that you dΘmarrez from a USB 2 port.

  You will not be able to install Windows from a port USB3.

  If you have the W10 installation media in a USB 2 port, windows can you are looking for the sata controller driver, so see if it works...

  Download the drivers from this link below (first or second listed file - 1 file listed (64-bit).

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation media W10 plugged into the machine, boot from the W10 installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, W10 will install.