HP Envy Phoenix 810-160: hard drive crash?

Similar Questions

• HP Envy Phoenix 810-160: give up WiFi

  I have a HP Envy Phoenix 810-160 that I bought in April of 2014, it came with loaded Windows 8.1.  It has a Broadcom BCM4352HMP 801.11 ac 2 x 2 Wi - Fi adapter.  It maintains abandon the connection. I have install the driver is 6.30.223.170 from 09/06/2013, I tried updating the driver and it says my driver is up to date. When I go to the available networks list my network is listed under the power of the full signal.  It does not connect and says that it can't connect.   I turn on/off the device in Device Manager and reboot, then I get anywhere from two minutes to an hour or two of functionality so that it falls new.

  I'm going through HP and widows forums forums all day looking for a solution.  I followed all the troubleshooting steps I found on the HP and Windows forums, but none were specific to this model PC and a wireless adapter.   The only step I have not tried it replace the adapter.  computer 8 months, I want to buy a new card from the computer.  As it is connected to the internet from the computer, I received, it's only this morning December 26, 2014 that the connection has begun to wane.

  I tried to update the driver, uninstall and reinstall the adapter off the blue tooth adapter, currently if I toggle the device once in a relationship and reboot, I get a time where I stay logged in, but eventually, he abandons the connection again.

  When I turn on the computer the little indicator white wireless on the front of the computer lights up almost instantly.  I see my home network with the power of the full signal and two laptops and my Iphone right next to the computer to connect to the same network with full signal strength.

  Hello:

  This is the latest driver W8.1 I could find... 6.30.223.227

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-139598-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0002

• HP ENVY Phoenix 810-160: I can't get the sound to work

  I just got the

  HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work.  I use it with a HP Envy 23 inch monitor which also has audio Beats and a HDMI cable connection.  I went through all the steps on the support page of the monitor and desktop support page.  Any help out there?  Thanks in advance.

  Hello

  No, it's going to work, you can not connect computer Office AiO 23 and get a sound of the AiO 23.

  Kind regards.

• 810-160 Phoenix envy: envy phoenix 810-160: try to install Win10 after BSOD and format; drivers not found

  A few weeks ago, I got the BSOD and could only reformat without saving. After a data recovery service ravaged my hard drive, I bought a new drive. My recovery disk is not found (my guess is the woman she pitched in one of his fits of cleaning). Of course, I have to re - install the operating system and bought Win10 home.

  I plugged the USB and started the installation, but now get a message that no driver device were found. It is a pain, but it makes sense. Went to the website of HP drivers on your laptop and downloaded all the drivers, it produces for my specific model.

  Where I'm stuck:

  I have a pop up that says "Windows Setup" and "Select the driver to install", with a window not populated. I plugged my USB key containing the drivers and found him - USB key (H.) I chose this drive and the folder where I placed the drivers. Click OK and I get the message "no device driver has been found. Make sure that the installation media contains the correct drivers, and then click OK. »

  If I have the drivers provided by HP and they are not recognized, how do I proceed?

  Hello:

  Make sure that you dΘmarrez from a USB 2 port.

  You will not be able to install Windows from a port USB3.

  If you have the W10 installation media in a USB 2 port, windows can you are looking for the sata controller driver, so see if it works...

  Download the drivers from this link below (first or second listed file - 1 file listed (64-bit).

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation media W10 plugged into the machine, boot from the W10 installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, W10 will install.

• HP ENVY PHOENIX h9-1355: hard drive not detected after installing new graphics card?

  My computer at starup tells me that it cannot detect my hard drive after installing a new graphics instead of my old card.

  The news is ASUS GTX 960 old Turbo was AMD Radeon HD7770.

  Can someone please help!

  Please, I beg you!

  See your other post.

• HP Envy Phoenix 810-160: graphics card update

  Course record:

  POWER SUPPLY:

  Inside 600 Watt (100V-240V)

  Hello

  first of all, I must say that your pc, fortunately, supports UEFI so that this card should not be a problem

  However for the card to work or to initialize with the pc, you need to maybe disable secure boot and go to the support of legacy. (this is what you need to know about what you heard on legacy mode)

  If I can guide you through this, for details and graphics during this visit the hp support page on the bios settings

  as for the question of the guarantee... If you are still IN the warranty period, opening manually to the top of the Cabinet would mean breaking the seal at the bottom of the pc... only the limited warranty of hp then apply... spend your license information and warranty before doing this...

  come to the 'best' part... it is an adjective and depends on your perception of and how much you can spend in the pursuit of it...

  a solution of 2 gtx in sli/crossfire mode 970 would be as powerful, if not a little more of the x... purpose of titan that would need a power 750 w... once again, the 980 is better that the 970 by a large margin, but nearly twice the price... a 600w will be enough for either, although

  hope that answers your questions

• HP ENVY Phoenix 810-160: HP ENVY Phoenix 810-160, no video at startup, on occasion

  When you press the Start button on my new computer, quite often it has no video for my screen output even if the computer turns on and seems to be running.  I must shake the switch and sometimes even put it off, and then turned to get video output.  All ideas, this is a new computer and I can't wait to send it back, but don't want a constant problem?

  It is a hardware problem and must be sent for repairs.  Talk to them first, you may just send the rear monitor.

• HP Envy Phoenix 810-160 Deskto: upgrade Windows 10 recovery disks

  When I bought this PC, I made the recovery discs immediately.  I later upgraded that PC of 8.1 Win Win 10 back when Windows 10 was a free upgrade.  If I have all the important issues in the future that may require a full restore, I prefer NOT having to go back to 8.1 earn and have buy Windows 10 to get back to where I am now.

  Is there a way to 'redo' recovery discs now so that any future recovery back me to Windows 10?

  Thank you!!

  > I prefer NOT having to go back to 8.1 earn and have buy Windows 10 to get back to where I am now.

  Because Windows 10 is installed on your computer, Microsoft has a "fingerprint" of your hardware,

  who gives you the right to re - install Windows 10 without having to buy a product key.

  > Is it possible to 'redo' recovery discs now so that any future recovery back me to Windows 10?

  Yes.  Or, if you have an empty 8GB USB - memory stick, you can write a copy of Windows 10 to it.

  See: https://www.microsoft.com/en-us/software-download/windows10/

  for a free download of Windows 10.

  When using this media, click on 'I don't have a product key' and the 'right' will allow you to continue with the installation.

• Want to Phoenix 810-160: USB controller driver

  I need the driver for the USB controller to a Phoenix 810-160 desire. the system motherboard is a worm MS-7826 1.0, the device in the "other devices" section manager said there is no driver installed.  I tried all the usual bugs, uninstall it, restart, update driver etc. nothing works.  Working USB 2.0 ports 3.0 ports do recognize not all devices, but they will slow down load a cell phone when it is connected so that they get the power. Thanks for the help

  Hello, go to http://support.hp.com/us-en/drivers/selfservice/hp-envy-phoenix-810-100-desktop-pc-series/5399342/model/6529902

  Download USB Intel under section (sp65142) Chipset host controller driver and install.

  If it does not please post since the Device Manager hardware ID to find the suitable driver for you.

• Intel Rapid Storage Technology driver update for HP ENVY Phoenix 810-135qe desktop

  Hello

  I recently bought a HP ENVY Phoenix 810-135qe desktop computer, during a performance of the construction in the auditor of updates to HP program that it is announcing the following update available for my machine and I was wondering if there were more details about what he actually did and/or updates/patches?

  Intel Rapid Storage Technology driver

  Description
  This package provides the driver for Intel Chipset SATA RAID solutions and SATA AHCI Controller in models supported that are running a supported operating system.

  Communicate details
  Exit the: 2014-01-23
  File name:sp65114.exe [1/1, 17.92 M]
  A Version12.8.2.1000 Rev.
  Compatibility:
  Microsoft Windows 7 (64-bit)

  Fix/development
  -Provides original drivers

  As you can see the description of correction and improvement really provided no details as to what is fixed or improved.

  If I need to apply this patch, it would be nice to understand a little better what to expect and what is fixed and/or improvements.  You have to forgive me because I'm old school and I usually generally follow the routine "if it ain't broke don't fix it".  I'll do what it takes well so I have a better understanding of what is going to happen in the case where updating mess something inadvertently.

  Thank you

  JCOOPER2

  Hello:

  What is the technology Intel Rapid Storage Technology software.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-020784.htm

  It is not necessary to install the update if you do not want.

  I doubt you will notice a difference in performance if you have it installed.

  It is unlikely that all the problems would result in the update (however could apply Murphy's law), but like you said... "If it ain't broke, don't fix it."

• Envy 15 j126tx: Hard Drive crashed

  Hi, my laptop's hard drive crashed, and I want to know if there is anyway I can get it back. In fact, my 'C' Partition (where the operating system has been installed) was running out of space, so I wanted to extend its size without interfering in anything else and I found on some site manager EaseUs partition can do this task, i.e. without deleting or re creation, it can resize partitions. So I downloaded Manager EaseUs partition and after installation, I tried to resize C, but it gave an error, it says something like the software was not compatible because it is software 32 bit, while I was running Windows 7 64-bit. I just gave up, assuming that this software is working 32 bit and with 64-bit custom. But when I hibernated my laptop, since he never turned on. It shows that there is no hard drive attatched.  I tried to check in the bios, diagnostic tool, but hard drive never showed up. Then I tried to Boot from a USB bootable (Windows 7 bootable USB), but in the section where I chose a player for windows, there is no drive. I tried to restore the repair option in the installer of Windows 7 too, but can't find any repair of the version of windows.

  Can I fix my hard drive?

  I fell off my hard drive permanently?

  My hard drive cable is unplugged? In fact I can't verify it cause I would cancel my warranty otherwise.

  P.S. I'm home, and I bought from another city, so I can't go to the dealer earlier!

  In fact you will not affect the warranty, if you check the hard drive. See page 47 of the manual here:

  Manual

  I think that the hard drive may be dead. The EaseUs couldn't do the invisible to BIOS hard disk or a Windows installation disc, but he could do no bootable hard disk by altering the partition table.

  I remove the hard drive and try it in a usb to SATA adapter and see if it turns.

• HP ENVY Phoenix 810-445qe: specifications of need on 14.79 GB "Disk 1" labelled "Datadrive1 (e).

  I spent the last few days setting up a brand new HP ENVY Phoenix 810 - 445qe I ordered from HP.com. (Information system down in the case, it may be necessary.)
  
  I did what all the new owners of the system should do after you set up the system: I did a DVD repair system, and am about to do my first image with Windows 7 (64 bit) backup.
  
  Of course, when you perform an image backup (which is like making a photocopy of your hard drive to a point in time) you can not store this backup on the same drive you're imaging, for the obvious reason that you can not write to disk at the same time you are Imaging it. If the image backup dialog box gave me three options of storage location:
  
  (1) Datadrive1 (E)
  (2) WD MyBook external hard drive (G)
  (3) Blu - Ray / DVD / CD drive (F)
  
  I was curious about the "Datadrive1" because I didn't know that's where! I don't me read something about it, then I went to control panel > system and security > ' Create and format hard disk partitions "(under administrative tools on the system menu and security - or the type of management of the computer in the Start Menu) to take a look at the drives and partitions.
  
  This computer was said to come with a SATA 3 TB and because disk 0 is close to 3 TB, with a labeled 100 MB partition "EFI System Partition" a 2779,01 GB NTFS partition labeled "OS (C)" and an "HP RECOVERY (D)." 15,28 labeled GB NTFS partition So, there we have the bootloader partition, the partition of operating system Windows 7 and the HP recovery partition.
  
  But there is also a 'disc 1' labeled 'DATADRIVE1 (E)"formatted as one 14.79 GB NTFS partition. I was surprised to see this data disc, because one of my complaints about HP computers in the past (or at least those available through Best Buy) was that they were always set up with one disc for the operating system and data. (It is always a bad idea to host your data on the same drive that your operating system, because the system disks get use more heavy and are more prone to failure.)
  
  I recognized my Western Digital My Book 1 TB drive disc 2, entitled ' My Book (G) ' and formatted as a single partition NTFS of GB 931,48. It is the external drive only, I am informed, plugged into one of the USB 3.0 ports.
  
  So I called the support for questions on disk 1. Where is he? Is what kind of drive? Is what brand? Etc, etc. HP support officer did not know the answer to that! She told me that my system only comes with an internal hard drive and therefore that * must * be an external drive belonging to me. I have an external USB drive connected but it's G drive.
  
  The only USB devices connected physically are: dongle USB wireless keyboard and mouse from HP; My WD My Book drive; and a HP Photosmart C5180 all-in-One printer with nothing plugged into its card reader, who can't stand not anything on the order of 14.79 GB anyway.
  
  I would like to know the details about this DATADRIVE1, because) I don't really know what it is and if I should write data there and b) do not know how stable the device is. Thanks in advance for your help.
  
  ***************************************************
  
  System specs
  ---------------
  
  Computer: HP ENVY Phoenix 810-445qe desktop computer
  Operating system: Windows 7 Professional, 64 - bit
  Processor: Intel i7-4790 CPU with cache, etc.
  RAM: 32 GB (four connectors DIMM DDR3)
  Storage: (see below)
  Video: NVIDIA GtForce GT 640
  Audio: RealTek sound with Beats Audio card
  Network card: 802.11 b/g/n Dual-Band 2 x 2 wireless MIMO with Ethernet, Bluetooth (not out), etc.
  Keyboard & mouse: HP USB wireless keyboard and optical mouse
  
  Storage card
  ----------------
  
  System disk: HDD SATA 3 to with separate cache (Boot, OS, recovery partitions)
  Mystery disc: 14.79 GB NTFS (single partition)
  CD/DVD: Super Multi Blu-Ray/DVD/CD-Writer
  USB ports: 4 USB 3.0 and 4 USB 2.0 ports
  Card reader: 5-in-1 Multimedia Card Reader
  
  What is physically attached
  ------------------------------
  
  Video cable
  Dongle USB for HP Wireless keyboard & mouse
  USB cable for Western Digital 1 TB external hard drive
  USB cable for printer all-in-one HP Photosmart C5180
  Audio output to speakers

  Hello

  Look at least one "storage card" and you will see "separate cache. Which tells me that your PC may have a separate cache device (16 GB).  See the image below.  Check your motherboard for this device in the designated area.  What do you see?

  

• HP ENVY Phoenix 810-230qe: PC upgrade as a whole

  Hi all!

  I am writing to talk about upgrading my PC, a HP ENVY Phoenix 810 - 230qe, as a whole. Initially, I bought a PC with a FX-8320 and a little sad back in 2013 graphics card and bought a carepack with her. Once the graphics card has failed and has been replaced three times in a single year, I called HP support and a nice case manager (thank you Lorraine!) hooked me up with this one - a k 4770, 12 GB of RAM and a beautiful 270 r9. However, I'm not comfortable with the temperatures of the PC under load because there is only a single fan for all of your PC and it is blocked by water from Asetek 92 mm cooling for the CPU package.  So, I was looking to upgrade the PC as a whole around my birthday later this year. I had planned on keeping the CPU, GPU, RAM and 2 TB HDD, but I was left confused - the PC came with a 16GB mSATA 'Cache', and I know not whether or not the 2 TB of HARD drive or the mSATA drive has my Windows OS on it - if it has Windows, I'm having a few problems. A photo of two devices are here. Furthermore, I don't know how the CPU is. I was wondering if anyone knew or not that the CPU has been mounted normally or if it has been welded on - motherboard was made by MSI and the model name is "MS-7826.

  If someone wants to see my upgrade of the list or make suggestions, it can be found here. I hope I can get some tips on the PC as well as help with my questions!

  Adam, welcome to the forum.

  I'll add my comments in a space next to your questions.

  AdamF wrote:

  Hi all!

  I am writing to talk about upgrading my PC, a HP ENVY Phoenix 810 - 230qe, as a whole. Initially, I bought a PC with a FX-8320 and a little sad back in 2013 graphics card and bought a carepack with her. Once the graphics card has failed and has been replaced three times in a single year, I called HP support and a nice case manager (thank you Lorraine!) hooked me up with this one - a k 4770, 12 GB of RAM and a beautiful 270 r9. However, I'm not comfortable with the temperatures of the PC under load because there is only a single fan for all of your PC and it is blocked by water from Asetek 92 mm cooling for the CPU package.  So, I was looking to upgrade the PC as a whole around my birthday later this year. I had planned on keeping the CPU, RAM, GPU and 2 TB HARD drive, but this left confused me - the PC came with a 16GB mSATA 'Cache', and I don't know whether or not the 2 TB HARD drive (this hard drive will be installed on this Windows operating system) or mSATA drive (this disk is used as a cache and does she not have any programs.) has my Windows OS on it - if it has Windows, I'm having a few problems. A photo of two devices are here. (The 'Recovery Image D:' partition on your photo is actually on the 2 TB HARD drive.  The mSATA drive is not listed because it is not used as storage). Furthermore, I don't know how the CPU is. I was wondering if anyone knew if the CPU was normally mounted (here are the specifications of the motherboard.  The processor has a standard outlet and can be easily upgraded.) or if it has been welded on - motherboard was made by MSI and the model name is "MS-7826.

  If someone wants to see my upgrade of the list or make suggestions, it can be found here. I hope I can get some tips on the PC as well as help with my questions!

  What you are wanting to do can work.  However, whenever you have high end components in a matter of smaller size, you will have problems with the HEAT.  You're right to worry.  Heat will cause all components to fail prematurely.  If you try to move the motherboard for another case, you must ensure that the holes in the match of the motherboard the accessory in the case.  In addition, some of the connectors cannot be the same as in a case of HP.  HP has their motherboards designed specifically for them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Envy Phoenix 810-130qe: Beats Audio Control Panel is missing after upgrade to Windows 10 anniversary

  OK I need help with my HP Envy Phoenix 810-130qe desktop computer. My pc came with Windows Pro 8.1 and it had an audio panel where you can set the audio beats. When Windows 10 came out I've upgraded to Pro 10 Windows and my control panel audio beats was still on my pc and worked very well. Then, when Windows 10 anniversary came out August 2 my pc automatically updated for the anniversary edition. Everything was normal, but my control panel audio beats had disappeared and I was able to find it anywhere. Do anyone knows how I can get it back or if there is no driver I can download to get it.

  Hello:

  If the W8.1 driver does not work, this W10 IDT audio driver should restore function Audio Beats.

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• No Audio - HP Envy Phoenix 810-145QE

  Not audio on the back or the upper connector, using the "Troubleshooting" of the message, it is that no device is connected. My headphone and line connection of the speakers work fine on my old HP computer. HDMI audio output does not work, but I really don't want to use this video out all the time. I tried to reinstall the driver, who was the same as this computer is less than a month. Why she even check to a device 'connected' to the audio output, that kind of thing is just a matter for additional problems.

  Hello BobinLA,

  I understand that you are having problems with audio in the upper rear connectors on your desktop HP ENVY Phoenix 810. In view of the new way in which this computer is I think it would be better if you contact HP Technical Support. This will ensure that your problems is not only dealt with, but a proper documentation.
  
  I want to thank you for display on the HP Forums. Have a great day!