Desktop computer and the creation of VMware View pools

Similar Questions

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• Disable the protocols and encryption algorithms in VMware View connection server and security

  Hello

  In my recent deployment, I had a customer request to disable some protocols and encryption at the Server VMware View connection and security. I read some articles and found that this has been achieved by editing the locked.properties file. But when we have edited and replaced the file, users could not connect to the virtual desktop, so came back to us backwards and desktop computers worked fine.

  I found a few articles that we don't need to edit the locked.properties file in VMware view Horizon 6. If someone has done this please guide me through. Here are the details of the protocols and encryption algorithms that should be disabled

  Diffie-Hellman key

  Enable SSL v2/V3 and TLS 1.1 and 1.2

  Disable the RC4 encryption algorithm

  Select the secret of transfer (if possible)

  
  

  VMware view 6 is the connection to the server and security server.
  

  
  

  Thank you.
  

  Hello

  I implemented the following steps (from the manual):

  1. update the JCE policy files to take in charge the high-strength Cipher Suites

  You can add some cipher suites of high resistance for greater assurance, but first you must update the local_policy.jar and US_export_policy.jar files to each server instance and the security strategy for JRE 7 see connection to the server. You update these policy files by downloading the files to extend JCE (Java Cryptography) unlimited strength political jurisdiction from the Oracle Java SE download site 7.

  If you include some high-strength cipher suites in the list and you do not replace the policy files, you cannot restart the VMware view Horizon connection to the Server service.

  Policy files are located in the directory C:\Program View\Server\jre\lib\security from VMware.

  For more information on the download of the JCE unlimited strength jurisdiction policy 7 files, see the Oracle Java SE download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

  After you update the policy files, you need to create backups of the files. If you upgrade the instance of the view connection server or security server, any changes you have made to these files can be replaced, and you may need to restore the backup files.

  2. the changes that policies of global acceptance with ADSI Edit

  • Start the ADSI utility on your computer see connection to the server.
  • In the console tree, select Connect to
  • In the selection or type a unique name text box or a naming context, type the unique name
    DC, DC = vdi is vmware, DC = int.
  • In the type or select a text field or the server box, select or type localhost: 389 or the name of a fully qualified domain (FQDN) of the server computer to connect to port 389 followed view.

  For example: localhost: 389 or mycomputer.mydomain.com:389

  • Expand the tree of the ADSI Editor, OU = properties, select OU = Global, then select OU = common in the right pane.
  • On the object CN = common, Global = UO, UO = properties, select each attribute that you want to change and enter the new list of security protocols or cipher suites.
    I used the following settings:

  EAP-ServerSSLCipherSuites: \LIST:TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA256

  EAP-ServerSSLSecureProtocols_ \LIST:TLSv1.1,TLSv1.2

  It is not the highest possible, but they work with all the features of our customers.

  • Restart the service of VMware view Horizon connection server (server connection and security).

  This is not Activate secret transfer (if possible) , but other points are covered.

  If anyone can give a tip to activate the transfer secret, I would be grateful.

• I have a desktop computer and a laptop. When I change a bookmark on one, it does not change on the other, even if I am connected to sync

  I have a desktop computer and a laptop.
  When I change a bookmark on one, it does not change the other even though I am connected to the sync.

  Sync is meant to do?

  Most probably one of the two computers has corrupted data which does not allow the sync complete.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• Where can I find of the bios chip on the motherboard of my Pavilion a6010e desktop computer and it is soldered?

  Where is the bios chip on the motherboard of my hp pavilion ab010e desktop computer and it is soldered?

  It is welded.

  

• I sell desktop computer and need to know how to remove all of the pc?

  I sell desktop computer and need to know how to remove all of the pc?

  The most difficult part of the first paragraph is to create the boot floppies - which can be complicated and requires installation of Windows disks.

  Perhaps a third simple but effective alternative is simply to re - install Windows on your computer from the disc that came with your computer or from the recovery partition.  Resettlement will delete all files on the disc and replace them with the New Installation of Windows.  At this point, the fragments of your old files may remain on your hard drive.  So once relocation complete, download and install the freeware 'Eraser' software, run it and you want to specify the "free space" erased on your hard drive.  This will overwrite firmly all the data remains that has not already been overwritten by the Windows Installation.

  Eraser: http://eraser.heidi.ie/download.php>

  HTH,
  JW

• When I turn on my computer and the desktop comes up, I get error Runner "file name (updates from HP.exe) Runner has no... "

  When I turn on my computer and the desktop comes up, I get a Runner error - "doesn't have a Runner (updates from HP.exe) file name '-' (the id separator).»  If I click OK everything continues normally.  What should I do?

  It is an HP with Windows XP computer.

  Hello

   
   
   
  Try to perform the clean boot and check if it helps, here is the link:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353 
   
   
  Note:
   
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click Start and then click Run .
  2. type msconfig, and then click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When you are prompted, click restart to restart the computer.

• I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office.

  Model F730 laptop and notebook product S/n CNF7415WH7

  I bought a laptop (compaq F30 us in the United States) and windows original vista came with the compaq laptop (bought in US). Now, I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office. I don't have the cd or the software with me key since they have not provided for me at the time of purchase

  Hello

  No there is no way, how the do, because the license of Windows Vista is part of the computer compaq laptop - this is the license OEM - and cannot be separated.

  (in case the laptop is broken and cannot be repaired, then the license expiresand cannot be used on another computer)

  LC

• I need activate and install the Prime Minister on a new desktop computer and take it off my laptop that someone else uses at present. How can I do this?

  I need activate and install the Prime Minister on a new desktop computer and take it off my laptop that someone else uses at present. How can I do this?

  You can simply disable the activation of the laptop by signing out or Deactivate option: it is not necessary to uninstall.

  Learn how to enable or disable Adobe applications.

• I bought a desktop computer and wanted to know if I am able to have creative clouds on this plan as well as my laptop with the same problem, I'm currently?

  I bought a desktop computer and wanted to know if I am able to have creative clouds on this plan as well as my laptop with the same problem, I'm currently?

  Your subscription license allows you to have two facilities activated, so if both machines meets the system requirements so you should be able to install and connect the two.

• I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing

  I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?

  Hi Kelly,

  Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.

  Activating the license on any other machine, please select the option to disconnect all other devices and try again.

  Reference: connect and disconnect activate Cloud Creative applications (deactivated)

  Kind regards

  Sheena

• I have creative cloud on my desktop computer and I just bought a new laptop to use when traveling. Can I add a creative cloud to the laptop without having to pay for a second subscription?

  I have creative cloud on my desktop computer and I just bought a new laptop, so I can continue to work with my documentswhen you travel. Do I have to buy a second subscription for the laptop? If this is not the case, how can I do to get the download for the laptop?

  Your subscription allows you to have two active facilities, so you can have it on both computers that are capable of running the software.  To get to the second machine you just to install the Manager as you did initially and use to get applications.

• I'm new to LR and did install you on a Mac desktop computer and laptop.  On the laptop, the basic function under develop simply disappeared.  I'm lost.  Help.

  Question: I'm new to LR and did install you on a Mac desktop computer and laptop.  On the laptop, the basic function under develop simply disappeared.  I'm lost.  Help.

  This is a common problem. The basic Panel is simply hidden.

  Billboards / of masking is actually a function of Lightroom, but it is intuitive--not many people know that there are - for the most newcomers are thrown when a Panel is somehow hidden.

  Right-click anywhere in the area of the Panel on the right hand side and a context menu will appear.

  Click on the basic option to re - appear the basic Panel.

• The installation of VMWare View Server program

  Hello

  I have a solution of ESXi, vSphere 5 where I host all my virtual servers with a virtual vCenter Management Standard.  I'm working on that I need for a configuration of VMWare View and I was hoping someone here could help me.

  I have 12 physical blades to host my VMWare View solution (according to the calculations of number of jobs) and I have VMWare View Bundle licenses.

  Ive been reading through the notes and he says that this set comes with an edition of vCenter.

  A few questions:

  My existing vCenter instance should be used to manage the VMWare View host or do I need to install a separate instance of vCenter VMWare View and use the license in the bundle?

  I guess I should install ESXi instances in the beam that will allow me to supply only desktop computers?

  If I have servers connection and composer, should they be hosted in Clusters VMWare View or the cluster of servers existing vsphere 5?

  If this is the case, I also have a question about the network configuration.  When I install the ESXi for VMWare View, will I still have a requirement for a management console, the vmkernel, and the 'Front End' (for users IP address) vnic to the vswitch?

  Another question about the round rbin DNS.  I try to also install Connection 2 and 2 servers of composer whose load is balanced.  Anyone has any info on setting up of Robin DNS?

  Thank you very much

  We use a 6 with network storage based physical NETWORK adapter configuration.

  You will have a default port for management.  vMotion is split to its own IP address, and these two vmkernel ports are on the same vSwitch, with natachasery used by one and waiting for the other.

  iSCSI must be separated from its own vSwitch and pair of NICs as well supported by linked vmkernel ports for redundancy and load balancing.

  This leaves at least another vSwitch and pair of natachasery to the actual traffic of vm.

  -KjB

  Post edited by: kjb007: said vSwitch

• Provision of servers across the Web using VMware View 4.0

  Hello

  I have an obligation to provide servers via http. I have the license for Vmware View, but have no idea where to start? I installed view a server in the DMZ, but we must talk back to the field so I put discarded it.

  My ultimate goal is to open a web browser and type the address of a server, and log in to access to the server via the web browser.

  Any help would be greatly appreciated.

  Rgds,

  Paul.

  View supports the addition of server farms existing Terminal Server to it's broker for connections giving the user a single place to connect to their strong server and virtual desktop terminal server.   All you have to do is create a new pool and add your terminal servers to the pool.  Notice only addresses the brokerage operations of connections to Terminal servers.