Desktop Dell goes into every 3 days recovery mode

Similar Questions

• HP 15: start-up goes into Office, not the menu mode START

  So I think this might be a frivolous job, after my upgrade to windows 10 8.1, my laptop comes in DESKTOP mode instead of the START MENU mode. Is this normal or have I done something wrong?

  W.P. "Bill" Marshall

  This should help. Scroll to the bottom of the page and look under "choose where to go when you connect:

  http://Windows.Microsoft.com/en-us/Windows-8/desktop-tutorial

• I had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  OK, so I've had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  It says: "Please choose an option:

  Start the repair Microsoft Windows environment

  Reinstall Windows

  Advanced options

  "Exit and restart the computer"

  I tried all the options, the demand for my keyboard and language input method, and then he says: "use recovery tools that can help solve the problems of Windows startup. Select an operating system to repair. If your operating system isn't listening, click Load Drivers and then install the drivers for your hard drives. »

  There is no operating system listed and when I click Load Drivers, everything that happens is a folder called "System32".

  There is another option, which is "Restore your computer using a system image you created earlier."

  This does not work either.

  So now the second option has two ways to sort, 'Start Windows System Restore' I tried before and now does not work. There are also "Start Full destructive recovery" which I also tried, but there passed the first hurdle, even if she says it should take 30 to 60 minutes.

  Advanced Options I can't use, because I'm not a user of advanced computing. It offers 3 options, although "Chkdsk", "Notepad" and "Command Prompt".

  Even when I put in the Windows 7 disc, it does nothing.

  This has all started after I had a few problems with the Sims 4 and since I changed my keyboard, but I don't know that could be the problem.

  Hello

  Thank you for the update.

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

  • A Boot Configuration data (BCD) store

    Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

    
    Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Let us know the results.

• About every hour, without any warning or action by me, my PC suddenly goes into Shut Down and restart immediately.

  About every hour, without any warning or action by me, my PC suddenly goes into Shut Down and restart immediately.  Everything is as I left it.  But all this takes time.

  original title: How can I stop my PC restarted on every hour.

  still having problems?

• Monitor Dell Vostro 2705 keeps going into power saving mode

  I have a Dell Vostro 2705. When I turn it on, the screen goes into power saving mode. We tried with a different monitor and it still does not work. I do not see there is a separate video card to replace it. Can it be fixed or is - a new computer?

  Thanks in advance for your advice.

  Judy

  Hello

  Its usually a faulty motherboard. So the only option is to get the Board replaced.

  You can try doing a power cycle and if still doesn't work then a replacement of the Board of Directors.

  Concerning

• I have a dell inspiron 1525, the screen goes black every few minutes. I have to close the lid and open it to make the screen come back. any ideas?

  Screen goes black every few minutes. have to close and open cover return the screen.

  Hello

  1. on what application is the problem occur?
  2. the hard drive spin when your screen goes black?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  I suggest that you update your display drivers and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2:

  Test the issue in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 3:
   
  If your computer works fine in safe mode, then there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

• My desktop Dell - Vista - computer does not, the monitor says no entry and have to wake up computer

  I have a desktop Dell Vista computer.  A few days earlier, when I pressed the power button to turn it on, nothing happened.  When I turned on the monitor, he says that he came into power saving mode.  When I checked the monitor once again, he said that there is no entry for the computer and press any key of the keyboard or mouse to wake up.

  The computer is plugged in and the green light in the back is on.  I don't remember putting the computer to sleep.  I thought I made a stop for a few days in advance.  Press and hold the power button on the computer does not start it or turn it off.  There is no sound (such as a fan).  I unplugged the computer briefly a few times, and then I finally unplugged overnight and is plugged in.  Light lights up in the back, but is not the "num lock" key on the keyboard and the light under the mouse does not light.

  I checked a few suggestions on this site, but they all require that the computer be on and you enter in this form or the screen.  Is the computer dead?

  Thanks in advance.

  Hello

  There seems to be a problem with the hardware, I suggest you to contact Dell support on this subject.

  http://support.Dell.com/

• When the computer is turned on, it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c.

  Original title: 0x000014c File: \Boot\BCD

  I have a Dell Latitude E5400 running Vista Basic. Just replaced disc and ran all the diagnosis is good. When I turn on it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c Info: an error occurred trying to read the boot configuration data. After I ran the diagnostics, he said that all tests passed but and if I wanted to continue with more, I said no and we say "Error" "SYSTEM_ERROR this system is not recognized as a Dell PC support. These diagnostics cannot be run on unsupported systems. "Then there's an OK box. How can I possibly fix. It is laptop of my child and I would like to fix it for him for the school. I have restore Dell custom factory integration CD that came with his laptop. It is said that "it is the Dell CD of CFI restore disc. I really don't want to ruin it. I don't want to run this disk and then was not the driver for it and she will not be able to surf the net or something like that. If anyone has an idea please let me know. Thank you!

  Hi Maddy,

  This problem may occur if the Windows startup files are damaged or missing.

  If your computer has integrated system recovery options, you can try to perform the Startup Repair and check if it helps.

  If it fails, you must have a Windows Vista installation disc and try to parade Startup Repair boot from the disc.

  If the problem persists, try the steps in the article to rebuild BCD, boot from the installation disc.

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Because you replaced the hard drive, you can also get in contact with the Dell helpdesk for assistance.

  Hope the helps of information.

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• Laptop goes into a spasm of disconnect and reconnect a USB 3.0 drive

  Original title - USB 3.0 unplug plug back

  I have 2 computers running Windows 8 Pro 64-bit. 2 computers have the same USB Microsoft drivers, the same set of Intel chips (both with the i7 processors) from the same manufacturer of motherboard. They have the same operating system, same programs, clean installs with drivers to date and windows updates, they're practically twins with the exception of a material fact; one is one laptop, the other a desktop computer.

  Two computers, although very similar in there profiles of hardware (Device Manager) and in contexts there, seem to have their preferences on what USB 3.0 devices that they like or dislike.

  The laptop will go into a spasm of disconnect and reconnect a USB 3.0 drive, whenever I plug. The office like this player and everything will work day and night. However, when I plug in a USB 3.0 flash drive in desktop and start transferring a file, it disconnects and reconnects the reader, which damages the transfer. The laptop like this USB 3.0 flash drive and will transfer files to and from this day and night.

  Of Corse it's backup and data transfer between 2 computers, although they are very similar, very difficult. Devices USB 3.0 a computer like the other goes into a conniption fit with.

  I tried everything I can think of. Updated, updates to the BIOS, software configurations, reader driver manager settings, different formats of devices, software of turbo boost, installs own, you name it. It is important to note that none of the problems happen with any of my USB 2.0 devices.

  Are there not a universal standard of USB 3.0? 2 computers act as if they have 2 different USB 3.0 standards! And each device will work with a standard computers. Is there a laptop computer and a standard desktop computer? LOL, it's nuts!

  SOLVED *.

  I solved the problem.

  Just ignore my other messages troubleshooting efforts earlier.

  The problem is with the Microsoft Windows 8 driver for:

  "Intel (R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft).

  The Microsoft Driver is dysfunctional , and there is no other driver available!

  I have disabled> Intel xHCI in BIOS on all my computers to get a partial solution to this problem of Microsoft .

  With XHCI disabled in BIOS driver Microsoft dose does not and so I can use USB 3.0 with controller Intel devices (although they are paralyzed, at least they work now).

  As a big bonus:

  My PC has 2 not intel USB 3.0 controllers!

  With Intel xHCI disabled in BIOS and no Microsoft Driver to mess things up that my 2 other controllers can now go full speed USB 3.0 there little made in China drivers! Windows8 should get fixed soon!

• my notebook, ProBook 450 G2 go goes into sleep mode when well even parameters of energy set to never.

  My notebook, ProBook 450 G2 goes into sleep mode when well even parameters of energy set to never. The operating system is Windows 7 Professional.  I had a technician Microsoft verifiez_ the. I also had HP tech check the. They both said that it was a hardware problem. I sent it to HP to fix it and they replaced the motherboard and said that they have tested. When I came back, it entered into mode 'sleep' again. I left my laptop for about 15 minutes and when I came back it was in mode 'sleep'. This always occurs after the laptop remained for about 15 minutes.

  Does anyone have a solution?

  I sent my laptop repair HP. They replaced some cables and motherboard, but it does not solve the problem. They finally replaced the Windows 7 operating system. Basically they gave me a new system. I spent 3 days to update windows with all the updates and then re-loading of my programs. What a mess!

• My Satellite Pro L Gets a BSOD after going into sleep

  My Satellite Pro L Gets a BSOD after going into sleep
  We spend whenever my laptop is asleep or in hibernation.
  When she comes back, it goes to BSOD.

  Can you help me please?

  What cell phone do you have exactly?
  What operating system do you use?

  Have you tried to reinstall the OS using the recovery CD?
  You update the OS?
  You update the BIOS?

• How can I buy a free app without going into the details of my credit card.

  How can I buy an app without going into the details of my credit card?

  I have already created my Apple ID without going into details.

  How did you create the account? Did you use the instructions on this page: create an iTunes Store account, App Store and iBooks Store without a credit card or other method of payment - Apple support ? If these instructions are not used then payment details must be entered before the account can be used.

  Have you tried to enter the card details? The card will not be charged (with the exception of a temporary store holding the load that your card issuer should remove in a few days or more), and you should be able to remove the card after entering it

• I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

  I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

  How can I fix it? Someone please help

  Hello

  What operating system do you use?

  If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

  Make changes to your desktop wallpaper slideshow

  http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show

• My printer interrupts communication with my PC when the P.C. goes into Standby Mode. Why?

  Until yesterday, the printer worked fine.  There is no cable or hardware change any.  I am running Windows XP with a jet of Lexmark color printer.

  When I restart the printer works fine.  However when the order goes into standby or hibernation mode, I can print is no longer when the box comes back active.  I get a message that "there is a communication error with the printer.  To correct this problem, a box appears I should go to start/settings/printer and make sure the "Enable bidirectional support" box is checked.  Unfortunately, I can't access the settings of the printer directly from the start menu.

  However, if I click on 'Options' that is displayed when the printer stops and I click "Troubleshooting", I don't see that the "enable bidirectional printer media" is more verified.  If I check, I get a message saying "printer is busy".  If I click on start again I get the same message and the "enable" box is unchecked.  If I hit Cancel, the box is also disabled.  I enter a loop that does not end.

  Any ideas how I can access the printer directly from the start menu settings?  Or how to prevent the impression of no longer communicate with my PC when it goes into sleep mode?

  Thank you much, long in advance for any suggestions you may have.

  It is a Lexmark Z-52.  After 8 hours of trying many different, including the link ideas that you suggested, I have determined that as a result of some recent Microsoft Download, the printer would work only if I used the Dell printing device incorporated in the installation software.  If I tried to install the Lexmark printer from the installation disc, I got the persistent problem.  I deleted all but access to the printer through the installed also origin and everything of fine.

  When I need to change the cartridges and align the jets, I install the Lexmark program, align the print cartridges and then remove the program Lexmark, using the default value of Dell for the printer remaining.

  It works, but why I had a problem, I don't know.

  TNX for the comments!

  Big Phil1