Desktop iMac froze value apple logo and white bar after restarting

Similar Questions

• iPad 2 Mini stuck on the progress bar with the Apple logo and progress bar is not loaded, his impasse

  I pressed on restart all the settings on my iPad Mini 2, so it loaded but it drained. So I rebooted it until he turned back when he turned his back, it was still showing the progress bar, but it was quite moving. I tried to hold down the lock button and the home button, but still, it loads, its stuck on the progress bar and did not progress. I tried to connect to my computer to connect to itunes, but it does Duke host because its deadlock on the progress bar with the apple logo.  .pls help me!

  Try restoring your backup and recovery mode: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  Hello

  Follow the instructions here:

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• My iPod 5th generation does not start (it will stay on the apple logo) and will not be detected by iTunes.

  Last night I tried to turn on my iPod that has not been loaded. I plugged it so that it can start loading. I think the iPod as was the accused, has no need for me to start and should have done by itself. When I pressed the button home to start using it, I noticed it was not on. Then I pressed the power button and then saw he was showing the Apple logo and then it turns off again. I tried pressing the "home" button and the Start button / stop at the same time and the same thing will happen. I also tried connecting to my computer and it did not recognize.

  Try the remaining actines of the:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• IPod touch 6 generation is passed in brick mode and I restored with put it in dfu mode and restored factory via itunes and it says that it has completed the restoration. And it the ipod starts up and has the apple logo and a loading bar which is st

  IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over

  Hi, Slkdogg1.

  Please visit Apple support communities.

  I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar.  I would like to start by going through the steps outlined in the article below.

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch

  If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.

  Solve the iOS update and restore error in iTunes

  Resolve alerts related to USB in iTunes

  See you soon

• My ipad air stuck in the black apple logo and keep turning it back on

  My Ipad air 1 (9.0.2) met black apple logo and keep re - feed in question when I use it on the Internet today.

  I tried to connect with itunes (12.3.2.35) and try to restore from a backup, but was unsuccessful, it cannot recognize my ipad

  Can I use power + Home key, the ipad is going to connect the itunes screen, itunes can recognize my ipad

  I tried to restore from a backup-> a failed

  I tried to download the new firmware (9.1) ipad and the ipad update failure->

  Each of them failed when Ipad beginning of installation of the firmware and the screen change connect itunes screen for apple-black screen

  The info from the failure is unknown error 9, I checked my USB port and cable, but they have no problem

  Can anyone know how to fix it?

  Thank you and thank you for your help.

  Hello!

  I also had this problem on my iPad 2 Air. This is a bug Apple don't want trouble. It was introduced with iOS 9, I hate the time when I clicked on the button "update".

  To resolve this problem you must:

  1. Press and hold the power button on the right side (iPhone 6 or later version) or high (all other iPhones, iPods and iPads) for 3 seconds.
  2. Drag the slider to slide to turn off right confirmation.
  3. Press and hold down the Home button on the front of your iPhone, iPod touch or iPhone.
  4. Plug in your iPhone, iPod touch or iPad to your Mac or Windows PC and make sure that iTunes is running.
  5. Release the Home button when you see the connect to iTunes screen.

  Then, connect your iPad to iTunes and restore. Unfortunately, you will lose all your info.

• MacBook Pro does not gel (Apple logo and turn the wheel)

  Hey guys I have a Mid 2009 Macbook pro 17 "and it will not turn it freezes on the spinning wheel and I sometimes get a black or gray screen. and sometimes the changes to blue for a quick 2 seconds then back to gray

  I tried many things

  SMC - Reset

  -Check and restore disk

  -Repair disk permissions - at one point he said there is a mistake and I had to repair disc I fixed it and the problem continues to persist

  -Tried to start in SafeMode but does not (same problem apple logo and freezing wheel spinner)

  -Reinstall OS x into recovery mode - no luck

  -Test LANDAU - no luck

  -Mac restore to previous state - including all saved backups stays so just looking for previous screen of backups

  Any help is much appreciated, thank you!

  What exactly happens when you reinstall OSX via recovery?

  It does not appear to complete successfully?

  Try to repair the disk again. Report any error. Also in disk utility SMART status is listed as verified?

• I can't access my music library on my iPod 5th generation touch, although he was previously synchronized. When I press the icon of the music, I see a screen with the Apple logo and the word 'music '.

  I can't access my library of music on my iPod Touch 5th generation with the latest OS. When I press the icon of the music, a screen with the Apple logo and the word 'Music' only, not my list of playlists, artists, or songs.

  I myself have solved by doing a reset.

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• Logo and nav bar jump when changin pages

  I built a Web site in Dreamweaver, and whenever we click on a new page, it seems to move a little, instead of looking like just the content evolves.  The logo and nav bar seem to jump a little.  Any help would be appreciated.  www.lyngarkosphotography.com

  Note that this is actually because you are moving long to a few pages of content and the vertical scroll bar is appearing and disappearing.

  Totally, the normal web developers and only will notice.

  If you really, really want to do, so it never changes from one page to another, you might add the following css...

  {body

  overflow - y: scroll;

  }

  This will create a scroll bar (without any real scrolling) on these pages who don't when their content is too short to make it appear.

• How to disable the region logo and Navigation bar area?

  Is there a way to easily disable logo and Navigation bar region region? For example if I wanted to incorporate my request to say another tool and I don't want to show the high logo on the region page and Navigation bar region. is it possible to easily disable this option via the URL? any ideas are appreciated.
  
  Thank you
  Surya

  In this example, you can see how it works:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:253

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• iMac froze on Start up on the Apple logo and the spinning wheel.

  Hello

  Can someone please help. My iMac started freezing when I clicked on any application or attempted to open anything. I turned it off the power and then turn it back on. Now I just get the apple logo with the spinning wheel down on white background. I tried to close again and reboot hold command + s, Ctrl + r, Ctrl + p + r, but nothing can get past the logo and the spinning wheel. I'm running snow leopard top and it worked fine until a couple of days. I can't on the utility disk or anythong at all. I'm not the most intelligent in the computers and it has me really stumped. Any kind soul can help with some info?

  KND regards,

  nicheda

  Before doing all this, what is your status of backup? You have Time Machine or a clone of your hard drive? If this isn't the case, it may be best to do nothing until you are able to see if you can find a way to save your data if things go from bad to worse.

  That said, assuming you are running OSX 10.5.8 (like on your profile) or Snow Leopard (according to the guidelines of this forum), have you tried starting restoring 1 gray disc that came with the Mac or the Snow Leopard installation disc? Insert the startup disk by holding down the c"" key. You may need to push the disc for the CD/DVD drive so that it can swallow the disk when you start if you can't get the Mac to accept the drive in its current state.

  If all goes well it will boot from the gray disk, although slowly. Once started go to the Menu utilities > disk utility. Launch disk utility, select Macintosh HD and click on "repair disk". If changes are made click on repair disk again and repeat until you get a clean pass. Once that is done, try to restart normally in the Apple menu.

• Why my iphone 6 more stuck with the apple logo and the black screen after the factory reset?

  I'm selling my iphone 6 Plus I did a factory reset, but it has stuck on a black screen with the white apple journal for more than an hour, why what is happening?

  Force the restart: press the lock and home buttons until the Apple logo appears again.

• iPad does not turn on/just the Apple logo and then turn off again

  I have an iPad, 4th generation, 64 GB with WiFi and cell phone, it is only 3 years and suddenly I can't turn on the iPad. When he started to act up it would freeze upwards with no icons or the button "home" in response, still on the screen, that he was freezing. I was able to restart it with the top button and it would work for 10-15 minutes and freeze no icons or the button being sensitive at home. I could do a hard reboot and when I rebooted, it would work again for 5-15 minutes and freeze once more. This was during a week and now it does not restart. When I try to turn on with the button at the top of the Apple logo appears, remains on the screen for about 3-5 minutes (no progress bar) and turns off again with no other screen appearing. I tried to find a solution online without success. Anyone have any suggestions for a fix for the iPad? I would appreciate any ideas that anyone could have.

  If the unit starts to turn back on the wide, then it seems that if you have a hardware problem. If the unit is charged and a reset will produce only a short period of service, then it is a hardware error or an error in battery, which would be also considered to be material. You can try to restore the device to factory and test without adding any additional content. If it still fails, then make an appointment at the Genius Bar watching him.

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• My iPhone 5 c is not light after gel problems and it comes up with the apple logo, and it ends and still will not come on, so help please?

  So I just watched a video on YouTube so I wanted to play a game so I clicked on the home button and when I did he was frozen, so I've been around by pressing the power and the home button at the same time and I did that turns off the coast as if it was supposed to do I he turned back and came up with the Apple logo as usual then it just turned off and I do fear and all I keep getting is turn it on and it is still is not turn on and my phone has had these freezing problems before, but never like this

  If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support