My ipad air stuck in the black apple logo and keep turning it back on

My Ipad air 1 (9.0.2) met black apple logo and keep re - feed in question when I use it on the Internet today.

I tried to connect with itunes (12.3.2.35) and try to restore from a backup, but was unsuccessful, it cannot recognize my ipad

Can I use power + Home key, the ipad is going to connect the itunes screen, itunes can recognize my ipad

I tried to restore from a backup-> a failed

I tried to download the new firmware (9.1) ipad and the ipad update failure->

Each of them failed when Ipad beginning of installation of the firmware and the screen change connect itunes screen for apple-black screen

The info from the failure is unknown error 9, I checked my USB port and cable, but they have no problem

Can anyone know how to fix it?

Thank you and thank you for your help.

Hello!

I also had this problem on my iPad 2 Air. This is a bug Apple don't want trouble. It was introduced with iOS 9, I hate the time when I clicked on the button "update".

To resolve this problem you must:

  1. Press and hold the power button on the right side (iPhone 6 or later version) or high (all other iPhones, iPods and iPads) for 3 seconds.
  2. Drag the slider to slide to turn off right confirmation.
  3. Press and hold down the Home button on the front of your iPhone, iPod touch or iPhone.
  4. Plug in your iPhone, iPod touch or iPad to your Mac or Windows PC and make sure that iTunes is running.
  5. Release the Home button when you see the connect to iTunes screen.

Then, connect your iPad to iTunes and restore. Unfortunately, you will lose all your info.

Tags: iPad

Similar Questions

  • iPad does not turn on/just the Apple logo and then turn off again

    I have an iPad, 4th generation, 64 GB with WiFi and cell phone, it is only 3 years and suddenly I can't turn on the iPad. When he started to act up it would freeze upwards with no icons or the button "home" in response, still on the screen, that he was freezing. I was able to restart it with the top button and it would work for 10-15 minutes and freeze no icons or the button being sensitive at home. I could do a hard reboot and when I rebooted, it would work again for 5-15 minutes and freeze once more. This was during a week and now it does not restart. When I try to turn on with the button at the top of the Apple logo appears, remains on the screen for about 3-5 minutes (no progress bar) and turns off again with no other screen appearing. I tried to find a solution online without success. Anyone have any suggestions for a fix for the iPad? I would appreciate any ideas that anyone could have.

    If the unit starts to turn back on the wide, then it seems that if you have a hardware problem. If the unit is charged and a reset will produce only a short period of service, then it is a hardware error or an error in battery, which would be also considered to be material. You can try to restore the device to factory and test without adding any additional content. If it still fails, then make an appointment at the Genius Bar watching him.

    Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

  • My 'iPhone' stuck with white screen, apple logo and bar inactive download. Cannot turn off or restart.

    try to download the latest iPhone update. Phone is locked. will not download or turn off the power. Tried with iCloud, connected to iTunes etc, any ideas?

    Try this: If you can update or restore your iPhone, iPad, or iPod touch - Apple Support

  • IPad is stuck on the slide to unlock any ideas

    Hi can someone help please my Ipad is stuck on the "slide to unlock screen" thank you

    Hi carolefromcramlington

    Try a restart of power: press and hold the sleep/wake and Home buttons and do not let go until the screen darkens and the Apple logo appears (no data is lost)

  • My phone is stuck on the black screen

    Hello! I own an iPhone 6 hours while I used it began to freeze, and the screen went black. It can vibrate even when people call me or send me messages but that's it. This happened a week ago except that my phone is stuck on the home screen and I could always turn on the light, wifi, bluetooth and all that. After an hour it turned off its own well, and after that it worked normally again. Except that this time that is not turning off on its own... what should I do?

    Press and hold home/sleep set button until you see the apple logo and then release, then wait for the bot device upward.

  • HP envy: stuck on the black screen

    Hello, so my Hp Envy is stuck on a black screen. It's a screen lit, but it does not load windows. I tried a hard reboot, nothing. I've updated the BIOS and it seemed that nothing was happening then loaded windows. My antivirus has been turned off and need to restart the computer now its stuck on the black screen turned on again. Help, please!

    Hi @Jaxibrey,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP ENVY laptop and having starting problems.  Try to make a hard reset.

    When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

    Here is a link to put the laptop in Safe Mode. Then you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. You may need to consider a few days before that the issue that has happened.

    Here is a link to computer does not start for Windows.

    Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

    Please let me know how it goes.

    By clicking on the Thumbs Up below, you can say thank you! .

    Thank you.

  • HP pavilion g6 stuck on the black screen with cursor 8 windows

    Hello.

    I used windows 8 perfectly... but today when I rebooted my laptop I don't have the 'Press esc to access the configuration menu"and once loaded in the windows icon. It got stuck on the black screen...

    Any ideas or suggestions? How can we get? Icannot go to the start menu cannot load the... Task Manager what can I do? Also the battery also affects bones

    "It was a moment cartoonic, when gravity stops for coyote to make him realize that he was wrong from the beginning."

    Hi, I did a hard job looking for a solution, and after a while, I found a solution. The solution to the problem was a little easy, but at the same time a bit funny too, hehehe.

    The solution was, when I removed the battery, then did what you told me, I even! Even the black of the same screen cursor. Then I tried power the computer nothing do but simply by pressing the power button without the battery in it. The laptop ran using cable ca, and then I was able to use the windows. Its perfect work. Now I have piles in too and its still in good condition.

    Now what do me? Should I replace the battery, I get error 601 (main battery) too. So should I replace it with a new one? I hope that it will be more preferable.

  • IPod touch 6 generation is passed in brick mode and I restored with put it in dfu mode and restored factory via itunes and it says that it has completed the restoration. And it the ipod starts up and has the apple logo and a loading bar which is st

    IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over

    Hi, Slkdogg1.

    Please visit Apple support communities.

    I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar.  I would like to start by going through the steps outlined in the article below.

    The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch

    If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.

    Solve the iOS update and restore error in iTunes

    Resolve alerts related to USB in iTunes

    See you soon

  • I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

    I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

    Hello

    Follow the instructions here:

    If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  • MacBook Pro does not gel (Apple logo and turn the wheel)

    Hey guys I have a Mid 2009 Macbook pro 17 "and it will not turn it freezes on the spinning wheel and I sometimes get a black or gray screen. and sometimes the changes to blue for a quick 2 seconds then back to gray

    I tried many things

    SMC - Reset

    -Check and restore disk

    -Repair disk permissions - at one point he said there is a mistake and I had to repair disc I fixed it and the problem continues to persist

    -Tried to start in SafeMode but does not (same problem apple logo and freezing wheel spinner)

    -Reinstall OS x into recovery mode - no luck

    -Test LANDAU - no luck

    -Mac restore to previous state - including all saved backups stays so just looking for previous screen of backups

    Any help is much appreciated, thank you!

    What exactly happens when you reinstall OSX via recovery?

    It does not appear to complete successfully?

    Try to repair the disk again. Report any error. Also in disk utility SMART status is listed as verified?

  • Stuck in the Windows Startup logo

    Hi I have a problem in my laptop, my OS is Windows 7 Home Basic. I'm stuck in the Windows Startup logo (that has a black background), I'm stuck more then an hour ago and the home screen do not appear. I tried to boot up my laptop in safe mode, but I'm stuck also. I tried to format my C drive and reinstall windows 7 but I'm stuck when the starting configuration are the cursor of the mouse is just turning, I waited over an hour and nothing happens.

    Can someone help me, I want to format my whole HARD drive and have a clean install of windows 7. 7.

    Hello

    How you try to install the OS? You use Windows 7 DVD, or you are trying to install from the hard drive?

    The Partition 1, which is the system partition, the files to start the operating system. For more information on the system partition, you can check the below link:

    http://Windows.Microsoft.com/en-in/Windows/what-are-system-boot-partitions#1TC=Windows-7

    4 the Partition, which is the recovery Partition, is the one which contans the image of the operating system, provided by the Original Equipment Manufacturer (OEM). More likely you would not have received installation media with the system and recovery partition conatins the image of the operating system, you can use if you want to reinstall the operating system.

    If you do not have the installation media and you have not created an either, it's only the recovery partition you can reinstall the operating system.

  • Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any?

    Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.

    Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud

  • I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

    I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

    find it hard to imagine that Apple could sell these defective products.

    If the seller is an authorized Apple reseller, an independent company,

    You may need to ask you if you could see & try a different product sample

    because you might be looking at something that has a defect.

    {According to the related help page, Type position should be more

    stable to use. However if the keyboard is not flat, this sounds like default.}

    Sounds as if you're not at the official Apple Store (apple retailer)

    but, on the contrary, are somewhere else. Could you give more information?

    Some keyboard accessories are made by third party companies; so

    If the product has an Apple product model number, we note here.

    When considering the purchase of an accessory, it's a good idea to test

    and check in the store before you buy. An official Apple Store has

    a different return policy as an independent reseller of Apple.

    Don't know if I can be useful; These chat rooms are usually Apple

    users of products such as yourself, who have taken their unpaid time

    to see if they can help the other users of the product.

    Good luck...!

  • What to do when the guard Apple logo appear and you lock your phone?

    II had my iPhone 6 s for about a week now and had no problems with it. However, from time to time, he unexpectedly keeps showing the sign of the apple logo and locks the phone. But after unlocking it, as usual.

    Everything is up to date on my phone. However, what this mean and what do I do?

    You have a case on it? Is it possible that the matter is pressing the sleep/wake button? If so try without the case for a while to test.

    If the problem persists I would take it back to the Apple Store. Although there are other things to try, a new phone should not behave this way.

  • Is the old puzzle slide with the Rainbow Apple logo always around here?

    Is the old puzzle slide with the Rainbow Apple logo always around here?

    For people who still have the old Mac OS 9, it is, but you must before mid-2006 PowerPC Mac to run it in classic, or to get a such a Mac ROM to install with a program called Sheepshaver.  Depending on your country, get a such ROM cannot be legal.

Maybe you are looking for

  • new numbers does not open old documents

    So when I have updated the computer my version of numbers updated. Now I have problem trying to open old documents & have to choose the version of numbers to use. Super irritating. Why have I not 2 versions of numbers instead of a updated version tha

  • B50 30 unknown device driver

    I want to know where I can get a driver for the unknown device on my Lenovo G50 30. He appears in as Device Manager with no driver loaded at all, but I can't seem to find a driver on the net for this device. Anyone else had this problem or knows wher

  • F4U52EA: Start flag Menu does not work

    My laptop to stop one day and found out it was the connection cable. So I bought a new. But now I try to turn on the laptop and get the message YOUR START MENU is NOT WORKING. I borrow more than two times and still get the message. What I could do to

  • Unable to choose the resolution 2560 x 1440 with ATI Radeon HD 6570

    product: HP Pavilion p7-1030be OS: windows 7-64 bit I installed the latest drivers from AMD and the latest driver from the Dell monitor. This HP desktop computer includes an ATI Radeon HD 6570 with 2 GB graphics card. AMD and HP specifications list a

  • How to save data in a txt file.

    Does anyone know why the txt file is empty with no content? FILE * f = fopen ("/ shared/documents/save.dat", "w");{if(f==null)}fprintf (stderr, "Failed to create output. txt\n");_exit(2) (1);}fprintf (f, "Hello World"); File is created, but the file