Desktop themes | Not able to find a... Help, please!

Similar Questions

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• Printers / HP Photosmart 5520: my printer asked a password am not able to find the password or reset an another pls help

  my printer was asking a password am not able to find the password or reset an another pls help

  I've used it since December when I bought the printer, but I just changemy internet company

  It was when he said ask for password which i don't remember not pls help.

  I can be paid to [personal information deleted]

  Hi @funmi09

  I want to help you set up your printer for your internet company recently changed. This document provides the steps necessary to find the WEP key or WPA or your wireless network password.

  Once you retrieve your password, the following will help you to configure the printer; Connection of the printer after you have changed your wireless network.

  If you still can't find your password, you will need to contact your ISP (internet service provider).

  I hope this helps.

• If I do not select F11 (fullscreen) a large part of the screen 'falls' to the right of my screen is not readable, I'm not able to find the necessary adjustments.

  Question
  If I do not select F11 (fullscreen) a large part of the screen 'falls' to the right of my screen is not readable, I'm not able to find the necessary adjustments.

  2/3 blanco on the left side of the screen

  With F11, all OK.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• I'm not able to find the FTF in current directory

  I tried to manually update my mobile Sola for android 4 using this theard

  http://talk.sonymobile.com/thread/41609

  and I'm not able to find something in this directory to the backup of my current FTF firamware stage

  When I got to this directory nevigate the last folder I have achieved is "Sony Ericcson" and there is nothing in it

  Navigate to C:\Program Ericcson\Update Service\db\13740270\blob_fs\ Sony

  Help, please

  Windows 7

  Sony Xperia Sola

  What is

  C:\ProgramData

  Sony is spying on the users of this forum?

  http://talk.sonymobile.com/thread/60197

  Don't forget to mark the correct answers & useful answers

  ANOTHER subject, if you have little time, please check this thread

  http://talk.sonymobile.com/message/244522#244522

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• not able to find the lan driver

  I had to reinstall windows xp I installed all necessary drivers, but I'm not able to find lan driver.pls help

  Model: HP Pavilion dv2124tu

  Hello:

  You have Intel PRO/100 VE network controller.

  Here is the link to the latest drivers for it.  Select the first download for XP 32 bit.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&keyword=%22PRO%2f100+ve+network+controller%22&lang=eng

  Best regards

  Paul

• OPatch commands fail with code 255 error and not able to find pots YES

  
  Hello

  I am trying to apply a patch using opatch but I get this error: "OPatch was not able to find pots YES to load their duration. Please provide valid Yes location using 'oui_loc' option. OPatch failed with error code 255".»

  Oracle is 11.2.0.3 x 64 on Windows Server 2008R2 x 64. The PATH variable have % ORACLE_HOME%\OPatch, % ORACLE_HOME%\OPatch\jlib, %ORACLE_HOME%\bin in it.

  The single command OPatch that works and not to throw the error is the command "opatch version.

  OPatch Version: 11.2.0.3.5

  OPatch succeeded.

  No luck on the search for resolution of problem or documentation on MOS.

  I can't find any documentation on the option 'oui_loc '.

  Any help would be appreciated.

  Sébastien

  First check that your ORACLE_HOME\oui\jlib directory already exists. If so, make sure you have "srvm.jar" in the directory. If not, copy and paste the directory or file (depending on what you're missing) of 11.2.0.3 another environment. I had the same problem and support was able to recreate the problem by renaming the folder jlib, but my specific question was the missing file 'srvm.jar '. Copy one through another system solved this issue. If you are missing "srvm/jar", you can also check ORACLE_HOME\jlib for "srvm.jar", because this could be a problem, as well (it was for me).

• JDeveloper is not able to find the server SOA

  I am trying to deploy Hello World BPEL project in Jdeveloper 11.1.1.6.0 to 10.3.6 stand-alone Weblogic Server. JDeveloper is able to the list of managed servers running (admin server and soa-server). However, it is not able to find the server of the SOA. I checked that soa-infra is running.
  While trying to find SOA server, it fails with the exception of Null pointer with the following stack trace:
  
  java.lang.RuntimeException: java.lang.NullPointerException
  at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.initPartitions(WeblogicSOAServer.java:89)
  to oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer. < init > (WeblogicSOAServer.java:68)
  at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listWeblogicSOAServers(ASBrowserHelper.java:275)
  at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listSOAServers(ASBrowserHelper.java:201)
  to oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper$ RunnableListSOAServers.run (ASBrowserHelper.java:333)
  at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: java.lang.NullPointerException
  at java.util.StringTokenizer. < init > (StringTokenizer.java:182)
  at java.util.StringTokenizer. < init > (StringTokenizer.java:219)
  at weblogic.utils.StringUtils.splitCompletely(StringUtils.java:119)
  at weblogic.socket.utils.ProxyUtils.getProxySocket(ProxyUtils.java:178)
  at weblogic.socket.utils.ProxyUtils.getSSLClientProxy(ProxyUtils.java:235)
  at weblogic.socket.SocketMuxer.newSSLClientSocket(SocketMuxer.java:396)
  at weblogic.socket.SocketMuxer.newSSLClientSocket(SocketMuxer.java:414)
  at weblogic.socket.ChannelSSLSocketFactory.createSocket(ChannelSSLSocketFactory.java:82)
  at weblogic.socket.ChannelSSLSocketFactory.createSocket(ChannelSSLSocketFactory.java:119)
  at weblogic.socket.BaseAbstractMuxableSocket.createSocket(BaseAbstractMuxableSocket.java:133)
  at weblogic.rjvm.t3.MuxableSocketT3.newSocketWithRetry(MuxableSocketT3.java:214)
  at weblogic.rjvm.t3.MuxableSocketT3.connect(MuxableSocketT3.java:383)
  at weblogic.rjvm.t3.ConnectionFactoryT3S.createConnection(ConnectionFactoryT3S.java:44)
  at weblogic.rjvm.ConnectionManager.createConnection(ConnectionManager.java:1784)
  at weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.java:1424)
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:443)
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
  at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
  at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
  at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
  at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
  at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
  at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
  at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:353)
  at weblogic.jndi.Environment.getContext(Environment.java:315)
  at weblogic.jndi.Environment.getContext(Environment.java:285)
  at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
  at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
  at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
  at javax.naming.InitialContext.init(InitialContext.java:223)
  to javax.naming.InitialContext. < init > (InitialContext.java:197)
  to oracle.soa.management.internal.facade.ServerManagerImpl. < init > (ServerManagerImpl.java:76)
  at oracle.soa.management.internal.facade.ServerManagerFactoryImpl.createServerManager (ServerManagerFactoryImpl.java:28)
  at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.initPartitions(WeblogicSOAServer.java:85)
  ... 6 more
  
  
  On weblogic server I get rest of newspapers at the end after starting the server. Don't know if this is the problem:
  < Opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < Opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  lookupEngineLocalBean using JNDI {java: comp/env/ejb/local/bpmn/CubeEngineBean} for engine type {bpmn}
  lookupEngineLocalBean using JNDI {java: comp/env/ejb/local/bpel/CubeEngineBean} for engine type {bpel}
  line 06:12 not match expected character "of folklore <>" "" "
  SOA platform is running and is accepting applications
  line 03:12 not match expected character "of folklore <>" "" "
  
  
  I already tried to reinstall everthing from scratch... Any help is appreciated.
  
  Thanks in advance.
  
  Published by: 925432 on April 4, 2012 02:32

  Hello

  It seems that your JDev is probably configured to use a proxy server, as in the stack trace, you see a line "weblogic.socket.utils.ProxyUtils.getProxySocket".

  Please try to remove the proxy configuration in JDev.

  Go to tools-> Preferences-> Web browser and Proxy-> uncheck "Use a Proxy HTTP Server" if it exists.

  You may also need to restart JDeveloper.

  I hope this helps.

  -Cris

• Not able to find the eServices application installed...

  Hello guys,.
  
  Sissi's I'm not able to find siebel eservice application installed on my machine after installing the example Siebel 8.1 SIA. Some body can help me on this problem, as I want a focus what needs to be done and how it should be done.
  
  I installed only sample, I force server installation.
  
  
  
  Windows 2008 platform server
  Siebel 8.1 SIA
  
  
  Thanks in advance.
  Smail

  Copy the shortcut to your application, open the properties and reference your new CFG.

• Not able to find the path where I have to put the file on the server .plx

  I have to make a few changes to the PLL (library) file and compile it to its .plx file and move the .plx on the server.
  
  I'm not able to find the path where I have to put the file on the server .plx.
  
  I put it in/iasapp01/app_name/library, but it does not in effect.
  
  Please help if someone knows about it, about how to solve this problem
  
  Thank you
  GAG

  So yes, we have replaced the old file by the new modifed one, but somehow, the changes that we made in the pll being file do not appear

  So either your changes do not work, or you have replaced the wrong file and there is another instance of the plx elsewhere. What happens if you delete your plx. IF its does not exist, the form should throw an error, otherwise, there is another instance of the file.

• Not able to find the tables of IOM

  Hi xperts.
  I use OIM9101 and sql developer to access the db. I created a connection, but when I'm looking the IOM tables, I'm not able to find a... just the tables précréé
  
  Any help...
  
  Mahi

  Then its fairly simple. Connect with username = oimuser and password = everything you used during installation

  But if its still throw an error, then you need either by putting the wrong password. It confirms once more

  Thank you

  Sunny

• you just bought an iPhone6. My contacts were transferred a manager of T-Mobile Samsung Galaxy 6 mt. I can't find them on the new phone. Help, please! Thank you.

  you just bought an iPhone6. My contacts were transferred a manager of T-Mobile Samsung Galaxy 6 mt. I can't find them on the new phone. Help, please! Thank you.

  You still have your old phone?

  Were your contacts on email like Outlook or Gmail?

  Switch from Android to iPhone, iPad, or iPod touch - Apple Support

• Where is Windows Clipboard files? What directory? I was not able to find this information. I want to get back to a previous screen printing.

  Where is Windows Clipboard files? What directory? I was not able to find this information. I want to get back to a previous screen printing.
  I didn't not turn off my computer and I did 3 other print screens after that I want to get back because I didn't stick it in Paint by mistake.

  The clipboard objects are not stored in a file. When you send something to the Clipboard, it is stored in a memory location that is only available for the operating system.

  A web search will find 3 third-party programs that will allows to record multiple Clipboard entries. Research on '' programs Clipboard. '' Microsoft® Security MVP, 2004-2009

• I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC.

  Original title: upgrade

  I am operating Windows Vista. I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC. Any advice?

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.