WD1001FALS hard drive does not start in my dell dimension e520

Similar Questions

• After the new HARD drive does not start installation Qosmio G15

  I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.

  Hello
  I think that the boot order has been the bad HARD drive in the BIOS.
  At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
  Simply access the BIOS and change the boot order

• Toshiba Q300 480 GB HARD drive does not start after migration

  Hello

  I bought a disc of Q300 489 GB to replace a small 840EVO of Samsung. I used the toshiba tool to clone the smallest to the largest player. However when the clone is finished and the reboot of the machine the machine hangs just at the start of the process (before starting windows 10). If I go back to my little samsung it starts without a problem.

  I tried to treat twice with NTIEcho and also tried with Partition AOMEI tool, all attempts have failed to start on the Q300 drive.

  I am just tempted to refer the reader to Ebuyer, getting another Samsung. Maybe Toshiba can tell me how to get the drive working properly?

  Regards Sean

  PS. can someone direct me to a page where I can raise a ticket of Toshiba, I would be grateful. There seems to be some links broken on the UK site.

  Hello.
  Do you have an error message when the operating system does not start? Appearing in AOMEI Partition Wizard you have been used during the replacement of the Samsung drive?
  After the largest disk cloning, you may need to change the boot settings in the BIOS or to remove the previous Samsung drive to test.

• Hard drive does not start after the use of the recovery on USB Manager

  The hard drive on HP G62t - 350 CTO Notebook to my newphew failed. I could create a USB recovery in the Recovery Manager. I installed a new 120 GB SSD. The original hard drive was bigger, do not remember now but 250 or 500 GB. I know that the recover the system after the hard is replaced (Windows 7) said "to avoid problems, install a hard drive as big or bigger than the replaced hard disk", but that's a question for later.

  Computer started fine of USB (in fact, is set to boot from USB if present by default). Recovery Manager starts. I choose minimum installation. He goes through the process of partitioning the SSD and copying files. Said so to remove the external media and restart, the computer will restart several times during the process, blah, blah, blah. I get out of USB and restarted, but after POST I get "no bootable media present.

  If I try to reboot, leaving the USB in, it starts in USB and that we are at the beginning. I am able to confirm with a rescue disk, the SSD has an NTFS partition that had Windows files copied to it and a large amount of unallocated space. (Something like 60% / 40%).

  So:

  1. How make bootable hard drive for, and if it was bootable, recovery processes complete?
  2. What is happening with the partitions? He creates the partition recovery first, and then after the start, the recovery partition installs the operating system? If so, I might have to give up this process because since I'm moving to smaller storage, I don't want to devote half of the drive to a recovery partition.
  3. Official recovery media help? A technician told me that he would do so, but couldn't explain to my satisfaction why the USB I created with Recovery Manager does not work, so I'm suspicious of the assertion that the media created by HP as opposed to media created by me using the own HP software would be better, and since the computer is under warranty I don't want to spend $30 + to find out.

  Most of the people who have installed an SSD that was smaller than the reader of the factory were unable to use any medium recovery HP with the SSD.

  As an alternative, if you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 family, by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Please note that this facility is not all customizations of HP or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the pilots of the HP G62t - 350 CTO Notebook PC Drivers page.

  Windows 7 SP1 can be found HERE and HERE.

  Direct link to Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash drive from windows. ISO

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• New hard drive does not start

  I have a T61 with XP on it. The factory hard drive was beginning to show its age, so I got a 500GB WD Black drive for her. I used Acronis True Image to clone the old hard drive to the new. I used my counter top to do the cloning. When I plug the new disk in, the cursor just blinks and it will not start.

  I thought that maybe the clone was bad, so I put the new drive hard back at the top of my desk and is able to boot all the way to the windows start screen. If I plug the old drive in the laptop, it starts very well, simply refuses to boot from the new drive.

  Guessed it.

  Put the new hard drive into the computer, put the old hard drive in a USB enclosure and done a CD boot Acronis, and made the clone of the laptop. Runs like a champ and now flies.

• G62: New hard drive does not start after recovery.

  I installed a new hard drive after my old a bi dust.

  I ran the recovery from the discs of HP.

  After formatting the disk and copy files, it won't boot from the disk.

  I changed the boot order and tested the drive in the BIOS.

  What Miss me?

  The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://FTP.HP.com/pub/softlib/software11/COL32372/ pv-80183-1/sp44645.exe

• Reinstallation of Windows XP Home Edition (new hard drive) does not start properly, please help

  I have a HP Pavilion zd7000 that bad on the hard drive. I bought another and used the reinstallation disc to reinstall Windows Home Edition.  Everything seemed to go well, but it starts now to a HP Invent logo black screen that says press F10 to go together to the top and F12 at startup of Lan.  Then, a second black screen appears that says press F1 to resume or F10 Setup.  I press F1 and Windows loads very well.  What can I do to have Windows load immediately without going through this?  Any help will be greatly appreciated!  Thank you much in advance!

  EverWin... IT WORKED! I can't THANK YOU enough!  I've been to every site I could find... begging someone to help me.  Audit throughout the day (for a week) to see if someone had answered... tried everything!  I'm so happy (and tired) I could just cry.  I can't believe that you took the time to help me... I appreciate it very much!

  God bless you!

• Hard drive does not start on Presario

  I have a Compaq Presario SR2050NX which is no longer boot from the hard drive under XP or Diags. I think it might be the hard disk controller or a corrupted bios. It crashes as soon as the mountain and the moon appear on the partition of diagnosis.

  I have a Presario identical unit, so I thought that I want to borrow this hard drive to help debug. Same results.

  I checked the boot order in the BIOS and it has floppy, CD/DVD, hard drive then. I also tried to plug the cable from the hard drive into one of the connectors and also tried a new cable from hard drive. No luck. I also traded memory just in case, but always the same result.

  I looked to see if I can update the BIOS where it was corrupted, but it gives me a .exe file I need to run in Windows. Is there a bootable CD to update the BIOS?

  This is what my bios at startup:

  FRIEND BIOS 3.17 26/07/06 Core version 08.00.12
  BIOS string: 63-0100-000001-000101111-072606-RS400-RC410-M-YZKC

  What can I do now? I can debug more. I'm not ready to buy a new system, and it seems that replacement motherboards are out of stock. I am happy to send in for service, but I didn't understand how to make yet on the HP site.

  Thanks for any help on this
  CAT

  Sounds more like a problem of motherboard BIOS corrupted. If the BIOS was corrupted you wouldn't be able to do much more in addition put on.

  Message edited by Adamtech 08/22/2009 23:05

• DV9000 new hard drive does not start

  DV9000 had smart hd HD replace failure did it, now, it will not boot from the cd to retrieve records. All I get is the operating system not found. Help, please

  OK... after a lot of trial and error. This works.
  ISO created from files that I found on the Internet for vista Home premium 64-bit
  Then used wintoflash to make the stick bootable flash... fail. tried again a portable my passport HD success!. Will boot from the external drive but not a flash player.

• my hard drive does not work, I can not download my antivirous

  my hard drive does not work, I can not download my antivirous

  Here are a few articles with possible solutions and its fix for the hard drive problems.  Maybe at least will help any problems you encounter.  I could have provided more targeted recommendations if you had provided more information about what the problem is exactly, when he started, the manufacturer, make and model of drive, how the player does not work - is that it recognized by the system, it appears in Windows Explorerr, the door opens when you press the button...  If the following text does not, provide this and more information about the problem and your configuration maybe we can provide additional assistance.

  Compliments and thanks to the spirit of another thread:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.microsoft.com/gp/cd_dvd_drive_problems - A Mr Fixit

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• Problem with installing Windows on a hard drive, HARD drive does not get detected after installation

  Original title: help with hard drive of the computer.

  Flow of the problem:

  My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals

  «intell...» »

  and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean.

  He said "not plugged in the media. Check the power cord.

  Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS.  He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected.  I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas?

  Hello Chris,

  Thank you for visiting Microsoft Community.

  According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer.

  I would say to format the hard drive once more and try to install Windows through normal Windows installation process.

  Refer to the section "using the installation option custom if no operating system is installed" in the thread below.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive.

  Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.