Desktop to large for my monitor screen

Similar Questions

• I have a windows vista Basic, on a system of e521 Dimansion. The windows display is too large for my monitor of the internet.

  I use a Dell Dimension e521 computer. the program is windows Vista Home Basic. The web page,

  the Internet is too large for my monitor. Y at - it a correction for this. My typing is slow.

  You are welcome.

  I'm glad that you solved the problem.

  See you soon.

• Windows screen is too large for my monitor

  I installed a new graphics card in my computer and now the screen is big for my monitor. I mean, this is where time is down to the right, I don't see until the first issue of "seconds" so if time is 02:25 all I can see is 2.2. Please help thanks.

  Either use the monitor controls to set the display and or rt click on the desktop, and then select the screen resolution

• The on-screen display is too large for my monitor

  I have a HP Pavilion dv4 Notebook PC model WA695UA #ABA after the installation of windows updates the screen display is too much for the monitor. I do not see the scroll bar or the minimize/maximize/exit keys, and the top of the screen overflows down so that I can see at the top of the screen under my taskbar at the bottom. System Restore didn't help, nor did change the resolution of the screen. Any suggestions?

  Hello

  Have updates you installed?

  Method 1
  I suggest you to run the display quality troubleshooter.

  Open the troubleshooter of display quality
  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 3
  I suggest you to update the drivers for the display adapter on the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Problems to project a PowerPoint presentation (2015) for external monitor/screen/projector

  I have a problem with PowerPoint presentations (2015) on my MacBook Air (Early 2015). When I go to the slide show-> game start, or when I click on the shortcut at the bottom of my document presentation button, I get the speaker on my mac book but not slideshow on the external display. My background image appears on the external display. If the computer and the monitor are communicating properly. My computer is selected as the control view. When I go to slide show-> Set up show, the external monitor is selected for display. The only way I can find a way show presentation is to select 'Swap poster' view of the presenter, and then go to the external display and select monitors swap to switch back. Another weird thing. If I mouse over the slide in the main presentation while in speaker on my laptop (none other than the background on the external screen image), the presentation gets confused and attempted to show the screen of the speaker AND presentation both on my laptop. Help! PowerPoint presentation is an important part of my work, and it gets really annoying.

  Thank you for all the ideas/solutions!

  I had the same problem for two days with two different projectors; a NEC and Epson. The only way I could make it work was starting up in 10 Windows via Parallels and the opening presentation. Everything works fine through Windows 10. I hope that Apple will release a fix soon! I don't like to run Windows, any more than I absolutely have to.

• have just bought reconditioned xp pc but the pages seem large for my monitor... is it possible to settle this issue?

  I can't full width on the page at all and the toolbar seems to take more than 25% of the page, it's really frustrating.

  Right-click in an empty space on the desktop and select Properties.

  Click on the settings tab

  Drag the "Screen Resolution" slider to the right until the screen is to your liking

  OK your way out

• My laptop screen is too big for the monitor, I do not see everything at the same time

  My laptop screen is too large for my monitor.  I can't see anything on the screen at the same time.

  Wednesday, April 18, 2012 05:52:34 + 0000, AnitaPepper wrote:

  My laptop screen is too large for my monitor.  I can't see anything on the screen at the same time.

  Change the resolution. Right click on the desktop and choose 'screen '.
  Resolution. »

  Ken Blake, Microsoft MVP

• I have a Compaq W17q monitor. The menu for the monitor keeps appearing on the screen and I can't turn it off. Can someone help with this problem?

  The menu for the monitor screen keeps popping up on my screen and I can't remove it with the menu button.  Help, please.  It interferes with the work on the computer.

  Contact Compaq support.

• Why desktop screen display upwards on the left side of the monitor screen and white is on the right; Properties show nomal.

  Why desktop screen display upwards on the left side of the monitor screen and white is on the right?  When I do my office they show nomal properties.  Everything seems to be normal.  Thank you

  Hi Sdaugherty3,

  Follow the methods below:

  Method 1: Try to change the resolution of the screen and check the results.

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

   

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  I hope this helps.

• When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes in the upper right corner.

  When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes at the top right corner with the-, square and X are too far to the right to do anything. How can I fit on my screen, so I can use my computer?

  Hello

  Please contact Microsoft Community.

  This problem is limited to any icon or it happens with all?

  Did you change to the computer?

  I suggest to refer to the following methods and check to see if it helps:

  Method 1:

  Install the latest display driver and check

  Uninstall the driver from Device Manager display.

  a. close all programs. This will ensure that the programs do not interfere with the update of the driver.
  b. right-click on my computer, and then click Properties. This will bring you from the System Properties menu.

  c. click Device Manager
  d. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.
  e. right click on the adapter, then select Properties.
  f. click on the driver tab. This tab displays information about the current driver, as well as options to update, delete, uninstall, and back the driver.
  g. click on uninstall
  h. restart the computer

  You can install the latest display driver for download on the site of computer manufacturing, same driver will reinstall automatically after the restart, if the computer is connected to the Internet.

  Method 2:

  I suggest you try the system restore. Restore the system to a restore point when your computer was working fine

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also check the Device Manager to see if the video card has a yellow exclamation on it with an error any:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/device-management

  I hope this helps.

  Kind regards
  Anusha

• When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  It could be the browser problem because the site is up and running, could you please try another browser.

  If same thing happening there so kindly go to Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools and download the desktop here CC application.

  Note: Please follow the instructions very Important, otherwise the download does not start.

  -Pierre

• How do I resize Photoshop - it is too large for the screen of my Macbook Pro and I can't resize corners?

  Photoshop is too large for the screen of my Macbook Pro.  I can't access the sizing handles - they are off the screen and I can't drag.  Any solution?

  You see the buttons in red, yellow, and red window? If for this, click on the green.

  If you don't then you may be in mode full screen, and pressing once or twice on the "F" key to return to normal mode.

• iMac 21.5 k for 2nd display screen resolution

  Hi, I currently have an iMac 21.5 with 4 k display. I have a second monitor connected via a Mini display to VGA. My 2nd screen has the ability to 1920 x 1080 (which is the best option), however, when I select this option, it pushes the screen to the right by 5cm, it's why I don't get the full use of the desktop computer. My second monitor is LCD, widescreen 21.5. Has anyone had this problem and managed to resolve it? Any help would be greatly appreciated.

  To see all the options for resolution, open system preferences, and then select display. There are two options: default and scaled. Click Scaled while keeping the option key and you will see all available resolutions. You may find that there is more than one 1920 x 1080 option (at different frequencies). Try a different setting.

• Smaller with the 2511 X HP monitor screen HDMI cable?

  Hi people, I have a desktop HP p6230f, Windows 7 64-bit o/s and a GPU ATI Radeon HD 5770. I had no problem with it until last night. Finally, I changed my DVI cable connecting the monitor to the computer during an HDMI cable.

  I have a picture of a 1 "wide black on three of the four sides of the screen! For example; If I drag an icon on my desktop or one of the items in my sidebar to the outer edges of the screen, they begin to disappear behind a blackened by the section of the frame of the screen about 1 "of the actual plastic mount that make up the structure of the entire screen!

  Now that 1 "size approximate but the width of the glass of the monitor is 21 3/4 but I can get about 20" of the real, usable, the screen display and 12 1/4 inches monitor glass vertically measured I can get about 11 1/8 inches of usable display! This means that I get less of 23 "usable display when measured diagonally.

  I already checked the monitor to the HDMI settings and I don't see nothing wrong in the settings of Windows 7. I'm about to reinstall the driver for the monitor, but I seriously doubt that will work.

  Also, I noticed that all my fonts and size of my desktop icons are smaller than they were before the change. I know how to enlarge them all but the problem is that they seem to keep back to the small size when I shut down the computer and start it back up.

  Now, it is possible that the problem is not related to the HDMI cord and I'm only note this 1 "black frame on each side and the top of my screen for other reasons unrelated to the monitor HDMI cable.

  So yes, I'll reinstall the DVI cable and see if that makes a difference, but even if it does, my question is; Why this would happen when connected to the HDMI cord, (I will also check the drivers of the HD 5770)

  Thank you

  HAH! It wasn't my imagination! Just when I was about to throw in the towel and admit that I was imagining all this and he went even to pull demand for assistance on the site I found the problem.

  For those who can run in this one day in the future, the resolution is in the "AMD Vision Engine Control Center" . I had lost my settings because I got an error of starting due to my inability to follow directions on a USB HUB, I added to the system last night*.

  On the left of this Panel of the user is a number of adjustments, you can do on a good many things involving graphs including the monitor you are using. Just click on the box entitled 'My digital flat screens' and Tin the drop-down list, click on "Options of scaling (Digital Flat Panel).

  You will see a slider that lets you adjust the scale yourself, or you can put a check in the box and have done automatically. If you use the cursor like I did, drag it over to the full adjustment right up to '0% overscan. As you do that you will see on the screen grow to fill the entire display window, (every 25 inches diagonal of it).

  That's all! Click "Apply" and you're done. This issue is resolved.

  ** (that's another story, but the short of it is that you do not want to add devices to the HUB USB FRONT that the new hub will load its drivers!).

• Need for external monitor for Portege R500

  The screen on the R500 (PPR50E-01301TEN) is fine for a use for an hour or two on the go, but if I use it constantly throughout the day, I get a bad neck and headache (perhaps the angle that you have to look as far as its small size). So I want to get the external monitors for her at work and at home. Home preference would be an LCD TV.

  The problem is Windows tells me that the screen resolutions supported for the external monitor is 1280 x 768, 1920 x 1080 and 1920 x 1200. Linux wants to offer me 1280 x 800 or below, although I might be able to fix this with a little tweaking. Assuming that Windows is right, does anyone know of a 18-21 "wide screen monitor or a TV with one of the resolutions supported as its native resolution, or even a resolution supported? I can't find something.

  It should probably be 1920x1xxx, 1280 x 768 will be quite grainy close up on a 18 "+ monitor." Why aren't all common intermediate resolutions on the monitors (1440 x 900 or 1680 x 1050) supported? If he can do 1920x1xxx, he should be able to make them.

  As much as I know duplicator can not improve things. This external device just flow through the signal from the computer laptop itself.

  What resolution do you need for your monitor?