Detailed hard disk Seagate ST3146356SS by PowerEdge860 [CF]

Similar Questions

• 2nd 2 TB Seagate hard disk not detected

  Currently, my Dimension 3100 desktop, 2.8 GHz P4 w/HT, 1.0 GB of ram has a Seagate 2 TB (6 Gb/s) inside. This hard drive replaced two hard disks, size 1. TB and 500 MB. The original 2 TB drive is full, 85%, so I bought another hard drive, exactly the same style and size as the active drive (STBD2000101). I run Linux as my main operating system, which is a resident of GParted. After that I physically installed 2nd hard drive 2 TB to SATA2, I tried to put up with GParted from the first hard drive to SATA0. Although GParted indicated that the drive was present, when this player was selected GParted not reported "no device detected". Temporarily, I removed the original drive and installed the 2nd hard drive to SATA0 for the purposes of the implementation of the partitions and format it ext3 of the live CD. It worked for the most part, except that GParted reported the drive as 29 GB used, even after formatting again. To make a long story short, I did some troubleshooting and found that nothing is really wrong, except that the 2, 1-TB limit has been exceeded when I installed the second hdd. The BIOS recognizes the new HDD on SATA2. GParted, run from the original disc with Linux OS, see a player but is grayed out when the disc is selected. I can see there is a problem with the limit of 2.1 TB on the capacity of the drive. Unfortunately, I use GRUB legacy bootloader installed on the MBR. I hope that others have worked through this kind of problem. Please notify.

  Thanks for the help. I knew why the second hard drive was not recognized. It is a matter of core, I use an old version of Linux. Recent kernels is not a problem with the detection of two hard drives of 2 TB. It is true that I have never exceeded the famous limitation of 2 TB. The kernel that would not see the second disc was 2.6.32. I now use the kernel 3.2.33. without any problem. Even if the drive can be detected by kernels older (for example. 2.6.32.59) there may be questions that deserve to move on to a core even more recent. "Grep sdb unpacking" command will display warnings if they exist.

• My imac (El Capitan 10.11.6 - 2 Terabyts) complete and FCPX disk will not work. I moved a few fcpxbundles library to an external hard drive (seagate 2 trabyte) and erased from the iMac. NowFCPX said that missing data as effects therefore can not shar

  Help!  My FCPX (v - 10.2.3) does not work because my iMac drive is full (iMac 21.5 inch has 2 terabyte w / v OS El Capitan 10.11.6) I had tried to free up space by moving tons of files on a usb disk Seagate (2 terabyte) speedboat that barely made a dent. then on the advice of a friend I found (in movies) a file called Final Cut backups. There were 4 files with extension, ".fcpbundle" I have three of them moved to another drive to Seagate usb - they had 2.82 GB, 21.6 GB and GB 68,21 that I thought should be enough and them removed from my iMac drive - bad! It says I have only 13.46 GB free on my 2 terabyte iMac total!

  The fourth fcpbundle it's TB 1.72! But before leaving that I returned and opened FCPX and found the warning triangle around my library... While my last project looked OK I couldn't / the share of exports because the pop-up says FCPX has no data for efx etc (the media looked at and display fine) and cannot be taken out.

  FCPX can work with the "beams" moved to another drive? How the detectable in a new place? Or how to put them back?
  How can I make sure that future packages clutter my iMac again?

  Do I need a RAID disks? If yes which?

  I found other folders in folders 'Make files' and records backup for projects with the .fcpbundle inside files

  How can I get this sucker working again?... and what should I do to keep him from doing the same thing in the future?

  Thank you

  John

  :.. then on the advice of a friend I found a file called Final Cut backups (in movies). There were 4 files with extension, ".fcpbundle" I have three of them moved to another drive to Seagate usb - they had 2.82 GB, 21.6 GB and GB 68,21:

  The backup files are only the database files (no media) and must be low, not gigabytes, do not know what is happening there.

  Media libraries stored in the bundle of FCP X library or stored outside?

  If stored at the breast, called managed media, simply copy and paste the library to a different location.

  Make sure that library books newly located correctly before you remove what either.

  Perhaps check your settings of the library.

  Click the library icon in the browser and it appears in the Inspector:

  

  By clicking on change settings shows this:

  

  Move the mouse over the media and it will reveal the path where things are sent.

  Then you might be able to track down what goes where.

  From you description, it seems that most of the media files and rendered is not be moved successfully.

  Some screenshots would be useful if you can't find where stuff is.

  Al

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Drive light external HARD disk Warrior exploded

  I use DiskWarrior do a reconstruction of the hard drive to save the files, if possible. Hard drive does not appear on the desktop, which had been seen as a USB device on system information. During the reconstruction, the Seagate external HARD disk light exploded and is no longer visible to the Profiler system as a USB device. Should I cancel the reconstruction? Should I try disk referee to 'stabilize' the disc and run Disk Warrior?

  Can you describe the real problem which caused you to run DiskWarrior "to save the files?  Who can provide a clue about your current situation.

  If DiskWarrior' forever,' you have to cancel rebuild it later.  How long it has beed running?  It may take time, if repairs are done by DiskWarrior.

  DiskWarrior works repairing data directory player (which defines where the files are stored).  There are other types of utilities who hunt the disc for actual data.  For example

  https://www.prosofteng.com/data-rescue-recovery-software/

• Photos can work using just an external HARD disk and leave my only intern?

  Hello

  I am using v1.5 Photos. On my Macbook HARD internal disk fills up very quickly. Fortunately, I have a nice external 1 TB drive and I would like to:

  (1) move all my photos on the external drive and direct Photos program so search the folder on the external HARD drive to find all photos.

  (2) when I import pictures from my camera in the future, that the Mac them automatically in the folder of photos on the external HARD disk and not keep fill the space limited on my Mac small disk internal.

  Is this possible? I remember that I was able to do it with iTunes years when I used a Powermac with 4 x internal HDD of various sizes. iTunes has been able to see the music on each disk files and present them to me as a single list of iTunes.

  I'm not interested in using iCloud at all, I have everything on HARD drive and memory sticks and I am satisfied that, as it provides all the storage I need and I only use a computer for my work.

  Thanks a lot for your help.

  Yes, it is possible to keep the pictures library on an external drive. Make sure that the unit is running at the launch of photos from your Mac.

  See this discussion for detailed instructions of another user.

  How can I move Photos on external hard drive?

• Re: Satellite L850 - 0C9 - cannot use USB3.0 external HARD disk

  Hello!

  I am looking for help from you guys
  because I can't use my NEW SEAGATE USB 3.0 drive HARD EXTERNAL 2 to with my labtop (L850 - 0C9)

  My labtop has 2 blue USB ports and I guess it's USB 3.0 and I checked it manual.

  but when I tried to copy data to the hard disk and after 1 minute, then he continues to display the message "the destination you specified does not exist. It happens every time.

  but I found an interesting point of it works fine with usb 2.0 port so now I use with this port.

  It shows that the hard drive is not a problem, but my laptop is in my logic.

  so I've updated almost all drivers and firmware support page vaissaille intel usb 3.0 driver.

  but it is showing the same message as before.

  Anyone know how to solve?

  Have a great Easter party anyway!

  Ran - this disc external HARD of 3.5 inches with own power supply?

• Satellite T130-hard disk/disk-Start Up question

  Hello

  I have a T130 2 years old that I use every day for work and have known no problem at all with him until a few days ago, when I noticed that it was taking longer than usual, to power.

  I checked all of my updates were up-to-date they are as far as I am aware of the Tempro and Windows. I did an AVG scan and nothing came out of the ordinary there and I'm still more than a third of the space on my hard drive.

  Everything was going well for a few days then yesterday when I tried to turn on the laptop wouldn't turn on at all--after several tries, on what he finally came and I kept it in sleep/stand by mode until I find what is happening. I ran the Diagnostic PC tool and everything is coming as a PASS except for the hard disk which appears in case of FAILURE. My USB pen is not registered when I try to use it. That said when I checked the PC Health Monitor, it says that my HARD drive was working and that my hard drive was 'good '.

  I assume from the above that there can only be one disk hard question - what is my next step? This kind of thing is easy to repair? Am I covered for what is a matter of product and less than five years, since I bought the laptop?

  Thanks for any help.

  L.J.

  Post edited by: LJ

  Hello

  If the HARD drive is not present in the BIOS, you will need to replace the HARD drive with a new one.
  Do you know how to access the BIOS?
  Switch on and press the F2 key. Now, you should check the first page of the BIOS. Usually the CD/DVD drive and the HARD drive must be included with all the details.
  If the BIOS could not recognize the HARD drive, this means that the HARD drive is faulty.

  To my knowledge, you could use a simple 2.5 HDD.
  Here is a beautiful statement containing a few photos and film how to replace HDD on T130 series.
  http://APS2.toshiba-tro.de/KB0/CRU1503660000R01.htm

  Good luck

• Portege A100: Change the new HARD disk in slave mode?

  Hello, I have a portege a100 laptop, I want to buy a Dvd for my laptop burner and one in mind, even if I need to put my hard drive in slave mode first, that the dvd drive is set as master.
  My hard drive model is MK1032GAX, could someone tell me that it is possible to do so, before buying the dvd burner to 100%.

  Hello

  To my knowledge it s is not possible. The technology of the laptop is different, and you can't compare it with the desktop PC.
  As far as I know, the settings are fixed and you cannot change it. I think that the HARD disk controller is set master and you need to buy a compatible CD/DVD player.
  Player settings are different and the Toshiba service partner can give you more details about compatible CD/DVD players.

• Portege S100 - upgrade after cloning BSOD & HARD disk

  Hi all

  I wonder if anyone can help me please. I have a laptop Portege S100 with a standard 80 GB drive. I want to upgrade to a 200 GB drive.
  Here's what I did.

  I ran Acronis to save an image of the 80 GB HARD drive. All backed by an external USB disk and checked. I inverted the readers and restored the image on the 200 GB drive. All restored and verified.

  I restart the PC with the new hard drive in place. "Windows XP" logo comes up, then aarrgh blue screen. Stop x7B.
  Swapped the old disk, system boots fine.
  Check in the BIOS, with the old hard drive in place that the RAID configuration is enabled by default

  New swap disk, JBOD configuration is enabled in the BIOS. Could this be why it is not booting? If I want to activate the RAID configuration, it is ok, but I'm told that it will wipe the hard drive!

  I have no qualms about wiping the new hard drive, but it will work? If I change the RAID configuration, then restore the image? The only reason why I have not done it so far is because it took some time to create the image, and then writing it back on the new disk and at that time there the owner of the laptop is needed it back. !

  Help appreciated!
  Thank you very much
  Alex

  Hello!

  Can you post the BSOD detailed please?

  I'm a little confused on RAID m parameters are you wrote. As I know the Portege S100 can handle only a single HARD disk.
  In addition, you must use the same settings as with the old HDD RAID.

  Maybe the SATA controller has a limitation of LBA 28 bit and can't handle a 200 GB HARD drive. In this case, the larger HARD drive should have 120 GB. Here you can learn more about the limitation:
  http://www.48bitlba.com

  Last but not least, you can see the new HARD drive for errors. Maybe it s faulty. For this, you can use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Sorry, but for the moment I put t have more ideas.

  Good bye

• Toshiba 40L3453DB does not recognize the hard drive Seagate Wireless Plus

  Hello

  I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.

  I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.

  Any help is greatly appreciated.

  Gary

  Originally posted by Y44KCM
  

  Hello

  I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.

  I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.

  Any help is greatly appreciated.

  Gary

  There are known limitations when connecting TVs USB hard drives:
  -HDD format is one of them: FAT/FAT32 should work, NFTS (depending on model) probably not
  -in the manual for this model, only the USB keys are hard disks mentioned, none (which require an external power supply).
  USB drives are USB - bus-powered and therefore does not usually cause trouble, while external power supply used by hard drives can lead to problems, this device is not recognized.

  In short: there is not that you can do, in addition to changing the USB device. You can try with the FAT32 format first, but with some probability that also won't work, except for the fact that FAT32 is supported only up to a certain size of drive.

• A Toshiba Satellite L300-01:00 - Sata 2 or 3 HARD disk controller?

  Hello

  I notebokk Toshiba Satellite L300-01:00

  My HD is broken and I would like to replace this HD SSD.
  This phone supports 2 SATA or SATA 3.

  Thanks in advance for your support.

  If you are the owner of the Satellite L300-01:00 should not be a big problem to get details and information about devices built in the notebook.

  I recommend you to install one of the two material great diagnostic tools which are:
  Everest Home Edition
  Sandra Sisoft.
  These two tools were recommended by the members of different communities and I love it too.

  These tools provide a lot of information on the material and I guess you get also information about the properties of HARD disk controller.

• Replacement for HP G62 hard disk recovery

  Hello

  I've seen other similar users have reported this problem but am not finding an answer that would solve my problem.  Having a laptop of HP G62-355DX under Windows 7 Home Premium, the hard drive turned be default via diagnostic codes and by calling the HP technical support to confirm.  The mfr/size of the existing hard drive is a Samsung 320.   Bought a new Seagate 1 TB of Best Buy.   I have 4 HP recovery disks.  Through the specified process for the recovery of the system, but once reached the end of it when the display shows "Preparation of recovery is complete:

  

  .. When the portable computer is restarted, it appears with the message no boot device is (and the hard drive for laptop boot option is enabled in the BIOS).

  Am stuck at this point;  supposedly, more large drives are supposed to work but is at - it a known issue?  I've seen references to one for different situations in these forums (for a desktop PC, for example).

  Or do I have to repartition the hard drive into two partitions, a 320GB and everything else - use someone elses of the Microsoft Windows 7 OEM CD?

  I do not have the Microsoft Home Premimum disc of course, only the HP recovery discs.

  The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the downloaded file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://ftp.HP.com/pub/softlib/software11/COL32372/PV-80183-1/sp44645.exe

• How to change the letter on the external HARD disk

  My drive external hard was originally on drive F, and with that, I got all my music iTunes also. However, for some reason, my computer stopped recognizing the F drive; the following message appears when you try to open this drive:

  "The drive or network connection that designates the shortcut 'F Drive.ink' is not available. Make sure that the disk is properly inserted or the network resource is available and then try again. »

  The problem I have now is that the external hard drive is now the G disk and iTunes does not recognize the path (G:\iTunes), I say to use, for example, my music is not loading properly and that a fraction is playable.

  Can someone help me with this?

  Hello

  I would recommend to change the external drive (g) to F letter.
  Do you know how to do this?

  After the external HARD disk is connected, you need to access the disk management and you will see the HARD drive (unique partitions) and other readers.
  Then you must mark the external HARD disk and should change the letter F.

  Perhaps the letter F was reserved for another drive.
  In this case, you need to unlock the letter F by assigning another letter to the reader that uses the letter F.

  For more details, please consult the Microsoft Knowledgebase document;

  [How to change drive letter assignments in Windows XP | http://support.microsoft.com/kb/307844]

• How to partition an external hard drive Seagate

  My old external HD Time Machine does not so I bought a 2 TB Seagate Backup more Portable Drive to replace it. It has been formatted for Windows but provided a configuration "NTFS_ Mac download for_ I ran. I'd like to partition the drive & use 1 TB for Time Machine.

  When I go into disk utility, I cannot and select the Seagate HD, the choice of the Partition is grey and not selectable.

  Any suggestion how to get this HD formatted correctly so that it is recognized in disk utility?

  I guess that the external hard drive is formatted NTFS, so disk utility does not have to perform all the tasks in this topic. It you can't format it on some Windows system with the FAT file system? Once the FAT is made, the Mac of THE it reformats with HFS. However if you want to do with the above partition size (1 TB HFS and 1 TB NTFS or FAT) then can try you with a disk management utility. Read more external for Time Machine & Windows hard disk Partition