Portege S100 - upgrade after cloning BSOD & HARD disk

Similar Questions

• I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do

  new hard drive

  I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advance

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  http://www.PAGESTART.com/acronisnewharddrive01.html

  The same technique should also work for Vista.

  Note: Acronis now sells their 2012 for the UI version may be slightly different.

  J W Stuart: http://www.pagestart.com

• 0xC8000247 error, cannot install Windows Update after change of hard disk.

  Error code original title: 0xC8000247

  I just replaced the hard drive in two laptops.  Set to launch on the third.  After replacing the hard drive by using EZ gig cloning software iv install the new drive hitachi that I tried to run windows update and received this error message.

  Hello

  Method 1:

  I suggest you to perform a System File Checker scan.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Note: you may be prompted to insert the Windows Vista installation DVD, if all files are proven to be absent or corrupt.

  Try to install the update once the scan is complete.

  Method 2:

  I also suggest you to follow the steps mentioned in the link and check.

  Follow the steps listed in the article mentioned and check.

  Important:

  How to back up and restore the registry in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  If the steps do not contribute not to proceed to method 3:

  Method 3:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

  Try to install the updates once the installation is complete.

  Hope this helps and keep us posted.

• Reinstall XP Pro upgrade after formatting the hard drive, the invalid product key

  I'm going through a gateway with xp adding purched proessional xp home. The hard drive has been formatted before the upgrade.  When I get the xp professional product key I get an error message indicating the product key is not valid.  The product key, as I enter corresponds to the product key in the business directory to the i386/unatended.txt xp CD.

  Thank you

  Steve

  * original title - family xp to xp pro upgrade *.

  Hi SteveConley,

  1. have you fully formatted the hard drive?

  2. what type of Windows XP Professional CD? It of an upgrade or clean installation CD?

  As you have formatted the hard disk, you can perform a clean install will impose you an operating system available on the computer to perform an installation upgrade.

  You cannot use the upgrade product key to perform a clean installation.

• Services Windows problems after cloning a HARD drive

  Hello

  I recently cloned my HARD for one SSD drive, using the SSD as my boot device. Since then, I was able to successfully access Windows services.

  For example, I've tried to expand a partition on my SSD and went to computer management. I got a message saying that it

  "cannot open log events on the computer service.

  I click OK and the computer management opens.

  Clicking on device management, I get a long enough message that appears that says

  'Disk management could not open Virtual Disk Service (VDS) [name of the hard drive]. This can occur if the remote computer does not support VDS, or if a connection cannot be established because it has been blocked by a firewall of Windows. For more information see on diagnose and correct this problem, see Troubleshooting Disk Management by using disk management. »

  I click OK and the message disappears.

  If I click on Services and Applications in the left pane I get WMI control and Services in the central pane.

  I double-click on Services, scroll down to virtual disk, double-click anywhere on the line, I get

  "Windows could not open the service of virtual disk for playback on the local computer. Error 1726 the remote procedure call failed. »

  Is someone can you please tell me what is happening? What have I done? Why am I not able to access disk management?

  I tried sfc/scannow and I get the message

  "Protection of resources Windows could not start repair service".

  EEK! What have I done?

  Thanks for the help, but I thought about it.

  I had turned off by mistake in my BIOS PATA, and causing the problem.

  Thank you for taking the time to respond, however. It's very appreciated.

• How to install Windows XP on Portege S100 home after HARD drive crash

  In my laptop s100-s1133 of a HARD drive crash. I buy a new one. Now, I can not intall OS (Windows XP). Windows is not installed, because it does not find my HARD drive. I got downlad drivers for toshiba (Toshiba RAID driver for XP (v1.3.8.0, 10/04/2006; 465 K)). After the installation of win98, it cannot detect the CD-rom...
  Y at - it a recovery for this model cd? or can say smb, how can I install WinXP on this model

  Hello

  You are right that you must install the first RAID driver before installing the operating system.
  If you have installed the RAID the installation Win driver will ask you to format the HARD drive.
  In this case, do NOT format the HARD drive because the RAID driver will remove and it is not possible to install the Windows XP.

  Now your question Win98; is on the page of the Toshiba driver you will find not all drivers for Win98 for this device and I assume that you need a particular driver for the CD/DVD drive to activate this device.

  I give you a warning regarding the use of the WinXP

  PS: On the Toshiba driver page, you will find the installation instructions. Follow this guide!

• Windows 7 it's without a permit after changing the hard disk (disk image)

  Hello
  I get a frequent reminder of microsoft my pre installed windows in unlicensed. I went through the process of checking online, but this has not helped (prompted him download fails during the installation). I recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & indicates the product ID.

  Can anyone suggest what I should do to get more of this?

  > I have recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & displays the product ID

  Retrieve the laptop using the Toshiba recovery disc after the HARD drive was replaced?

  The operating system which is part of the Toshiba recovery image has already been activated so the new activation should not be possible and necessary!

  Don t know what is the problem here, but I recommend you to reinstall the operating system once more using Toshiba Recovery disk (I hope that you have created in the past)

• Tecra S1: It is possible to upgrade the 80 GB HARD disk

  It is possible to upgrade the hard drive on my Tecra S1 on a 80 GB HDD +. If Yes, what is the maximum size and can recommend a disk.

  I found some info, and it seems that you can only use a 30/40 and 60 GB HARD drive.
  I guess that the 80 GB HARD drive will not be recognized by the BIOS correctly.

• 2009 iMac has none showing after restore and hard disk crash

  My 2009 iMac running 10.9.5 Mavericks locked up and I had to restore it from backup. After I restored it, it made 2 backups and then crashed. When I tried to restore it again there is no hard drive available. I got when starting was a folder flashing with an exclamation mark. When I started a drive (10.6) there was no available hard drive. The Profiler system showed no applications and no hard drive. Does anyone know how ix, or it is not repairable? Thanks, DJ

  Reboot into Recovery Mode and then reformat the drive of DiskUtility in recovery. Try again.

• Portege M200 - what is the maximum HARD disk?

  Hello

  I need to know what is the maximum capacity of the hard drive that is supported by Portege M200.

  Hello!

  I guess that the Portege M200 is equipped with an IDE HDD interface. This means that the laptop has a limitation of LBA 28 bits and so it can only manage s HDD up to 128 GB. If you can use a 120 GB HARD drive in this notebook.
  If you want to learn more about the limitation of the LBA you can look on Wikipedia or here: [www.48bitlba.com].

  I have good experiences with Seagate drive HARD Hitachi s, but you can also buy another HARD drive. ;)

  I hope I could help you.

  Good bye

• Satellite A100-192: after Vista installation HARD disk capacity has decreased

  I am a user of Satellite A100-192 with 120 GB hard drive. After I installed Vista Ultimate, I saw this total capacity of my hard drive completely passed to 92, 8 GB instead of 120 GB while it was XP.

  What can be the problem? How can I reach the other capabilities of my hard drive?

  Hello

  Vista needs and used 2 partitions. The second partition is not visible and it s necessary to Vista backup and restore functions.
  Maybe you have verified that the size of the first partition (C) and didn't note the size of the second partition.

  Concerning

• Satellite P300 - 18 M: how reinstal Vista after repair the HARD disk

  Hello

  A month ago my laptop has suffered a critical failure of hard drive. So I sent in under warranty and it come back a day or two ago. With him a piece of paper stating that I have to reinstall windows in bold, yet windows (Vista) originally came with it (without a cd or a dvd if I remember correctly).

  I thought I was going to see the same installation process of windows the manual tells me to go through that when I arrived to the laptop, instead, I get a black screen back apparently under windows 98 (?) with "C:\ > ' ask me for an order or a file.

  So yes, I'm completely lost.
  Thanks for any help in advance.

  > more windows (Vista) came originally with it (without a cd or a dvd if I remember correctly
  You are right. But the laptop came with the option of disk recovery HARD and with a GREAT recovery disc creation notification using the preinstalled Toshiba Recovery disc creator.

  So if you didn't create the recovery disc then you would not be able to install Vista again. :(mais autant que je sais que vous pouvez commander un Recovery disk (pour tous ceux qui ne l t créer une disquette de récupération propre) from here):
  https://backupmedia.Toshiba.EU/landing.aspx

  See you soon

• activation key is no longer valid after repair and hard disk crash

  Hi I have a problem which I didn't know until today. Windaow is after a key of activation as my old hard drive crashed and needed replacement so I did it and today, tried to turn the key on the computer but said old or invalid keys! Help

  Hello

  I suggest you to read the following article and check the status of the issue.

  Resolve activation problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  You may be unable to activate Windows Vista over the Internet by using the Windows Activation Wizard of.

  http://support.Microsoft.com/kb/933177

• Reinstall Windows 7 on new SSD after failure of hard disk, damaged, incomplete product key

  I have a HP Pavilion.  The HARD drive recently failed completely, no possibility to recover data at the moment.  I ordered a set of HP recovery disks, but they seek the recovery on the HARD drive partition; There is no such partition that I replaced the HARD original with a new SSD drive.  To make things worse, the place that HP has chosen to put the Microsoft product key sticker resulted in the product being partially faded key.

  So, to summarize: HP not Pavilion with a corrupt OEM HDD and so far no data recovery possible. a new SSD with no partitions on this subject; a set of recovery disks from HP that don't just work; a sticker with the product key with the first two digits of the product key (as well as some of the barcode, etc.) rubbed off because they have chosen to place the sticker on the bottom of a working computer instead of, say, under the battery, it can be protected.

  If someone in the community has a suggestion as to how to install Win 7 (must be 7 on this system, cannot be an iteration of 8 or 10) from scratch, without having to buy it and with a corrupt OEM disc and a partial product key, I'd love to hear it.  Maybe it's time to install Debian on it?

  Ahh, this is the crux of the problem... the bootmgr is missing.

  To restore the windows off the factory restore DVD, you must configure the BIOS to use the DVD drive as the primary boot device. The machine will then start on the first DVD, and you will not get the above message.

• Upgrade Windows Vista Ultimate to Windows 7 Professional (the two 32-bit) using Express upgrade after that my hard drive crashed.

  Hello:

  As the title says, I have recently updated my new hard drive, I got from Dell's Windows Vista Ultimate Edition of Windows 7 Professional. I don't have the product key for the Express upgrade, so I'm unable to activate my copy. The last time this was back in 2009 when I bought the Express upgrade, so I don't know what I did to fix this problem.

  I appreciate any help you can give me.

  Hello

   
  I suggest you only to contact a Microsoft Customer Service representative to activate your copy of Windows.

  http://support.Microsoft.com/contactus/cu_sc_prodact_master