Details about using RMAN

Similar Questions

• Updating of database without using RMAN duplicate

  Hi all
  
  I intend to update my test instance in a PIT using backups RMAN of PROD. I would like to know the process without being connected to the PROD database and without using RMAN dual.
  
  Thank you.

  Imran khan says:
  Please delete your concepts about the process of backup and restore RMAN... It is not possible to update your db test for prod db RMAN backup parts without using RMAN dual and without connecting to the PROD database...
  I would be very surprised if you can get this answer to your pointless question...

  It is most details too throw an insult while making false statements on the displayed issue.
  Maybe you are the one who does not know how to use rman.

  There is a way to clone (refresh) a database of development of a backup of the production without using the command DUPLICATE.

  In summary, you must do this:

  (1) with rman, restore the backup piece controlfile.
  (2) startup mount
  (3) with rman, restore the database.
  (4) recover database using backup controlfile until Cancel.
  (5) use the 'nest' utility to change the name of the database.

  Good luck!

  : p

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• Expert secrets for using RMAN and Data Pump by kamran agayev and Aman Charm

  Hello
  
  This book is available in INDIA:
  Expert secrets for using RMAN and Data Pump by kamran agayev and Aman Sharma
  
  How can I get this book in India.
  
  Thank you
  Alok
  
  Published by: user12141893 on April 6, 2012 11:25
  
  I tried to purchase this book online official site crawling but shipping cost was more than the cost of the book.
  Book is not available on Flipkart and Amazon

  Helios,

  OP can send a mail to me too :-).

  OP,

  We are in discussions with the editor. In India, the book by another editor partner and details of it that I'll update when would be available. Thanks for your interest in our book.

  Aman...

  PS: This is a technical forum and is not intended for topics. Please discuss contacting Keita and me by email personally. Keep the forum in order that it is served for-technical discussions.

• ORA-19504: cannot create file when using rman

  Hello
  on 10g bR2 on windows machine my rman backup failed on a drive mapped with following error message:
  ORA-19504: cannot create file when using rman
  
  What do you suggest me?
  
  I heard that RMAN cannot write to the mapped file system. Is this true? Some people proposed:
  
  OracleService must be run by OS user with permissions
  
  But what oracle service? Target or RMAN catalog database database?
  
  Thank you.

  You must change your environment, on metalink:

  How to configure RMAN to write about readers shared on Windows NT/2000
  DOC - ID: Note: 145843.1

  Werner

• Vista seems to ignore the free arp packets. There are details about this problem with Vista?

  There are details about this problem with Vista?  Thks Jerry

  Hi Jerry.Smith

  You can check this link for more information:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/thread/c6cb9f57-7D5D-4B75-A79A-ff0806300fbe

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution.

  Political pe Windows license, the terms and conditions of redistribution

  I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution

  For more information of WinPE 2.0, you can consult the following articles:

  http://TechNet.Microsoft.com/en-us/magazine/cc138016.aspx

  http://TechNet.Microsoft.com/en-us/magazine/cc160884.aspx

  http://TechNet.Microsoft.com/en-us/windowsvista/aa905120.aspx

  J W Stuart: http://www.pagestart.com

• It is advisable to use RMAN backups?

  Hello

  Currently in our production databases, they took only the export dumps in every day.

  Is it advisable if we use RMAN backups?

  Expdp/impdp we can import the dump and create a database in UAT as same as production.

  If we opt for RMAN, is it possible to restore the backup as expdp to test if necessary?

  Thanks in advance.

  2

  679362 wrote:

  Hello

  Currently in our production databases, they took only the export dumps in every day.

  Is it advisable if we use RMAN backups?

  As others have said or implied, it is MORE than advisable.  I would declare it like this: If you want to stay independent as a DBA, it is mandatory.  Without him, there will come a time where you will lose data.  And which violates the Prime Directive for the DBA.

  Expdp/impdp we can import the dump and create a database in UAT as same as production.

  Which may or may not be very well to "Refresh" a test database, but it is not acceptable for the recovery of a database of lost output unless you accept BOTH of the following:

  (1) potentially to recreate an 'empty' database to replace the lost production database.

  1 a) potentially lose required components of database and/or configurations because you have forgotten/don't do them after the recreation of the empty database

  (2) lose all data that has been added to the database once your instant export has been taken.

  Do you think all the foregoing as an acceptable risk for your organization?

  If we opt for RMAN, is it possible to restore the backup as expdp to test if necessary?

  Definitely.  Why wouldn't be?  With rman for your primary backup strategy does not prevent you to export for any purpose you want to do with them.

  I have 4 key production databases.  For three of them, I update their counterparts in test with rman backups. For the fourth, I use exports.

  Thanks in advance.

• Using RMAN/Flashback to restore or passage / failover to the backup database

  Hello

  I'm new on the protection of the data.  I read the documentation and have implemented the Data Guard for my database of test called PPRD.  So I PPRD for the primary database and PPRD_DR0 for sleep.

  I've implemented the custody of data with the default, maximum Performance. I'm testing. (That's 11 GR 2.  I also use SQL/RMAN to set everything up.  I can implement Grid Control to administer it.

  What I was asking is - as the case may be, are there times where I'm better NOT do a failover to the standby?  Given that the PPRD is in archivelog mode (of course) and we have full and incremental backups archivelogs all being written to the disc, AND my expectation is mode maximum performance... is there times where there was NO data loss by restoring the database and he recovering from RMAN? Indeed, recovery logs are intact, not if the first line of conduct?

  Now, obviously if there is some sort of disaster and the primary is destroyed we would failover to our expectation. But for most typical failures, wouldn't we want to use RMAN and the backups/archivelogs as a first course, because there MAY be loss of data with the maximum performance mode? Also, I know there are views, that we can use to see how in sync is the day before, but I'm a little unclear on this.  At the time of a database problem, if we do not have an automatic failover enabled and configured, exactly how can we check how to synchronize the standby is with the primary?  (I know that this response is common and there, I don't want to ask the obvious question.)

  Since I was in archivelog and flashback as well on mode the primary... If the primary is still intact (but has a problem) I use RMAN, flashback, etc. before making failover/switching in high school?

  Thank you for any response.

  Hello;

  Yes. For me, a failover is a last resort. Ask yourself a few questions:

  My company requires an availability of 100%?

  How long the principal will be not not available?

  How long and how to recover from failover?

  I can make a move to the place?

  Each year we turn off the room of servers for a weekend. What I do, it is a failover, then a switch after the old primary appears as the day before and catch up.

  Here are my notes of failover test:

  http://www.Visi.com/~mseberg/data_guard/Data_Guard_Failover_Test_using_SQL.PDF

  This may help too:

  Roll a standby forward using an RMAN backup to trouble The Nologging changes incremental (Doc ID 958181.1)

  Best regards

  mseberg

• Standby database using RMAN

  Hello
  
  If the primary database is configured with ASM and Eve has normal file system. Can we create standby database to the primary database with RMAN?
  
  
  Kind regards...
  Sandra

  Hello;

  Ton of information on MOS

  Step by step guide on the physical creation sleep by using RMAN Duplicate in filesystem ASM ASM primary [ID 837102.1]
  Creating a physical standby to primary ASM [787793.1 ID]
  Physical creation sleep by using RMAN Duplicate without stopping primary [789370.1 ID]
  Step by step Guide to create physical standby on Normal file system for ASM primary with RMAN [838828.1 ID]
  Step by step guide to create physical standby database with RMAN [ID 469493.1]
  RMAN Duplicate to default to standby with Rman-06024 [ID 881674.1]

  and

  http://blog.yannickjaquier.com/Oracle/how-to-create-a-physical-standby-database-with-RMAN-duplicate-command.html

  Create a database waiting for a database with RMAN

  http://www.Visi.com/~mseberg/standby_creation_from_active_database_using_rman.html

  Best regards

  mseberg

• Current database cloning using RMAN

  Hello
  
  I have my database (11.2.0.3.0) of test running on Windows server 2008 R2 64-bit. My name is TESTDB database and its operation in log mode archive with ASM. I want to clone the same database using RMAN... I checked the many documents and have searched in google also, but did not find the right document. I am very new to the database of ACTIVE RMAM feature.
  
  Here I have the different file name with the structures of different directories also...
  
  my doubt is:
  
  * 1. How to copy a database running in log mode Archive with the DSO to the remote computer with the same name of DB via RMAN? *
  * 2. How to copy a database works in log mode Archive with ASM in a remote machine with the different DB name like CLONEDB via RMAN? *
  
  Please suggest me how to proceed?
  
  Thank you and best regards,
  Vikash jain (junior DBA)

  Salvation;

  Clone already documented processes, also similar issue mentioned here several times. Please overwiev:

  clone database
  Re: how the database cloning
  Database duplication

  See also:
  How to make a copy of a database that is open to the Duplication of another Machine [ID 224274.1]

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• differences between the Data Pump to back up the database and use RMAN?

  What are the differences between the Data Pump to back up the database and use RMAN? What is DISADVANTAGES and BENEFITS?
  
  Thank you

  Search for the backup of the database in

  http://docs.Oracle.com/CD/B28359_01/server.111/b28318/backrec.htm#i1007289

  In brief

  RMAN-> physical backup. (copies of the physical database files)

  DataPump-> logical backup. (logical data such as tables, procedures)

  Docs for RMAN-

  http://docs.Oracle.com/CD/B28359_01/backup.111/b28270/rcmcncpt.htm#

  Datapump docs

  http://docs.Oracle.com/CD/B19306_01/server.102/b14215/dp_overview.htm

  Published by: Sunny kichloo on July 5, 2012 06:55

• How can I restore and recover the database to a different server using RMAN?

  Hello Friend:
  
  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.
  
  That's the two servers. different stored different on each server and a single link, a table library where backup set.
  
  I can only restore and recover the database of the Rman command. Could you give me a demo?
  
  Thank you

  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

  That's the two servers. different stored different on each server and a single link, a table library where backup set.

  I can only restore and recover the database of the Rman command. Could you give me a demo?

  Check this box
  * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

• can u we take online redo log backups using RMAN... can you guide me

  can u we take online redo logs using RMAN backups... in 1og

  RMAN does not backup online redo logs.

• DB migration from windows to solaris using RMAN bkp

  Hi all
  
  current database version: 10.2.0.3
  version of the operating system: windows 2003 server with sp2
  
  proposed database version: 10.2.0.3
  version of the OS: solaris 5.8 or higher
  
  We wanted a migration proposal a DB from windows to solaris box. the only available backup is bkp RMAN.
  I know we can do using expdp/impdp or transportable of RMAN tablespace.
  
  I would like to know if there is another method to migrate using RMAN bkp between cross-platform.
  
  Thanks in advance.

  http://www.databasejournal.com/features/Oracle/article.php/3600931/Oracle-10G-transportable-tablespace-enhancements-cross-platform-conversion-capabilities.htm

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/dbxptrn.htm