Details of music file missing in Windows Explorer

Similar Questions

• e250v2 Playlist file missing in Windows Explorer

  I didn't exaclty know how it happened. I enjoyed my e250v2 much. I create playlists on WMP 11.0.5721.5260 and sync them with my sansa and everything works fine.

  Suddenly, the drive letter has changed, and the small logo of device Sansa is missing when I use Windows Explorer to access files on my Sansa. The file seems / is different. There is no playlist file at all. However, when you use the camera itself, there is a playlist in the playlist file. I have manually all the music files from the sansa itself, but a "playlist" of delelted is always in the "playlist" folder which is always there.

  Also, when I sync a new reading list for the sansa now, the music files are present in the folder "music", but there is no "reading list" in the playlist folder (other than the above mentioned empty playlist.

  Help, please!

  According to my sansa, I have the V03.01.16A version.

  Thank you.

  What USB setting you normally use? If your drive is on Auto Detect, it means he was able to connect in the MTP or MSC mode. If it is passed it could account for the different 'look'.

  Try to switch between the 2 modes and see if things return to normal.

  Better manually the value to be one or the other and say - considers the parameter "default".

• Music files vanish in Windows Explorer!

  I just bought a 4 rocket GB with an 8 GB memory card. All my songs appear fine on the device, but when I plug it to the PC only half the song files are in the internal memory. The SD card is empty, so I don't think that's the question (trying to remove the card, no change).

  In addition, mp4s, I add in the folder video do they not appear on my rocket at all. Don't know if it is related.

  P.S. If this can help, one MSC mode circuit and I have Windows XP SP3.

  You must have been in mode Auto Vice at one point and he missed PSG during at least one of your file transfer sessions. You can see the files on the device that have been transferred in the same mode, so that would be why only half of them are appearing. If you can connect in MTP mode, I bet you would find the other half.

  A format of the unit erases the memory of all this so you can recharge all your files in one USB mode.

• Cannot delete or rename a file Word via Windows Explorer

  Windows 7 - Word 2007. Modification of a file .doc (compatibility mode) where the word went into a loop where it ignored all the entries. I waited for half an hour and finally had to stop the word with the Task Manager. The file that was opened at the time cannot be deleted or renamed. Same results when the system is booted in safe mode. Message is "the action cannot be completed because the file is opened in Microsoft Office Word. Word is NOT open at this stage. Result even after a reboot and no further action other than the attempt to delete the same message.

  If the file is opened in Word and immediately closed with no action of any kind, always the same result, cannot delete the file and the same message is given.

  Surprisingly, the file can be copied but try to remove the copy gets the same message.

  How can I delete the file?

  Hello, Azam, thank you for your interest for my problem

  Re: Virus Scan - I use AVG and ran the scan with no problems found

  Re: Safe Mode, see my original post. I tried without success

  However... I found a way to remove the file. The BACK DEL cmd line feature deletes the file. We have to be careful and make sure that absolutely nothing reference file. The first time I tried to delete the file that I had Windows Explorer open and the file was clicked and the first page was displayed in the preview window and the DEL command failed, noting that the file is open in another application.

  When I closed the window of the Explorer and retried the DEL command, it worked!

  Unfortunately it took me almost two days to think about trying the DOS command line utility. I won't forget her now.

  Thanks for responding.

  You ask if I have problems and I still have another major unresolved problem. It is, however, deliver a MS Word. If this isn't your cup of tea, perhaps you can point one word on it gurus.

  I posted this a few days ago on the Office Online site in the area of the floor. There has been no response...

  Here is a copy of the message:

  -------------------------------------------

  Word 2007 and Windows 7.

  I have a file called v1.doc who was already involved in a situation where while I just changed that word went into a loop, and after waiting half an hour, I had to terminate Word by using the Task Manager.

  When I reopened it v1.doc Word seems to have recovered the file correctly, but at the top of the window where the name of the file is indicated, there is now the "(Read-Only) text '."

  When I try to save the file Word tells me that as the current file is read-only, I must give the file a new nane what I do: v2.doc and speech issues.

  When I opened v2.doc I expected the read-only attribute is missing since the new name has been provided. However, v2.doc file has the same note "read-only" at the top.

  Record (using Save as) as v3.doc v2.doc continues the same process.

  I can't get rid of the read-only attribute and therefore every change requires a new version of the file.

  If we check the file properties in Windows Explorer the read attribute alone is NOT defined.

  ---------------------------------
  I could not remove these files are older versions v1.doc, etc that I note above

  Any solution to this problem would be highly appreciated.

  Concerning

• [SOLVED] Optical drive empty missing in Windows Explorer, but not in the folder of the computer or Device Manager. Windows 7 x 64 HP Pavilion dv6-3032tx

  The problem: the optical drive [cd/dvd burner] icon is missing in Windows Explorer when no media inserted in the drive. Even if the optical drive icon in Windows Explorer when a disc is inserted in the drive.

  However, the optical drive appears in 'Device Manager' and in 'Computer' folder or no media is inserted in the reader as to the latter.  This doesn't seem to be a hardware problem.  It is a Windows 7 problem [or character?], which seems to be set [or omitted] in Windows 8.

  Here are the step by step process to solve this problem:

  1. open Windows Explorer [click on "Start" and type "Windows Explorer" in the search box, then click on the first result to the Summit, which is "Windows Explorer"]
  2. in Windows Explorer, click on "Organize" (top left of the window).
  3. in the click from the drop-down list 'folder and search options '.
  4. at the bottom of the window that comes up, under the "Navigation" tick to choose 'show all files '.

  I need to do this every time I have to reinstall Windows 7 x 64 Home Premium on my HP Pavilion dv6-3032tx laptop.

  I hope this helps someone. Wellness wish all

  Hello

  Thanks for sharing the solution. Hope this fix helps the other forum users encounter the same error. In case you are having other problems with Windows in the future, feel free to post your request here on the Windows community, we will be more than happy to help you.

• Type a file name in windows Explorer emphasizes not the file

  Hey,.

  I have a wired problem, when I type the first letters (one or more) of the file name in windows Explorer, that is not

  highlights the corresponding file.

  (if I have a file named help.txt and I press 'h' on the keyboard, nothing happens)

  * I tried to manually select a different file before that type a letter and it did not work either.

  Thank you!

  
  

  
  

  Hi Magniy,

  1. How are you manually highlighting the file in Windows Explorer?

  2 when was the last time it was working fine?

  I suggest that you first of all, highlight the first file in Windows Explorer and try again later to highlight the file you want to check if it works.

  When you do it manually, make sure you highlight of the Windows Explorer window and then check if it works.

  If the previous step fails, to consult with another keyboard if the problem persists.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot our Association of video files in my files, it says windows Explorer has stopped working.

  Original title:

  Video files

  Cannot our Association of video files in my files, it says windows Explorer has stopped working and then restarts itself back to the home page. they do not yet show in media player.

  It could be Aproblematique with the codecs trying to preview the files. Go to the Control Panel, reports on problems and Solutions, click on "View problem history" on the left pane, scroll down to Windows Explorer, under click twice on the problem that correspond to the date and time that you have encountered the problem. Note the name of the file next to the heading ' fault module name: ', google for the file to see what program it is. Uninstall, update or reinstall the program.

• View on the part of the seconds to the time stamp of the file "Update" in Windows Explorer.

  I wish I could see the part seconds the timestamp of the file "Date Modified" when I'm in Windows Explorer and using the details view.  I have Windows XP SP5 and have set up my file options to use Windows Classic view and my view is set to show the details.

  Hello PM_01,

  Unfortunately, when you view the date and time, in the Details view, you won't see the seconds remaining.  However, you can use third party software that will give you this option as well as many other options.  I hope this helps!

  Thank you

• D3dx9_43.dll file missing in Windows 7

  D3dx9_43.dll missing file. That's what I get when I install the new game it not show this problem and the game will not open. I have the graphics card Nvidia Geforce GT550m with Core i7.

  Hello

  ·          Did you change your computer before this problem?

  D3dx9_43.dll problems result in one way or another by a problem with Microsoft DirectX. The d3dx9_43.dll file is one of the many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3dx9_43.dll errors usually only appear when you use these programs.

  Follow the suggestions and check if that helps.

  Method 1

  You can run the System File Checker.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2

  You can uninstall the game and reinstall on your system.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3

  You can install the latest Direct X from the Microsoft Download Center.

  http://www.Microsoft.com/download/en/details.aspx?ID=35

• How can I remove topic of file Type in Windows Explorer?

  How can I get the title of 'Type' of the track without having to move out of the site whenever I have access to a folder?  I can see the file simply type by looking at the extension of file and/or icon, in order to have a column dedicated to tell us the file type is not significant and placed automatically between two useful columns is just stupid - and the user have means of obtaining useful information permanently removed ' Type' column.  STUPID!

  I already know the answer to that question is, 'it can't be done", so how can I communicate with Microsoft, who can do something, rather than be eliminated in a forum of people who all have the same question and no answer.  -Skyler

  Skyler and others are right. Users (me) need to be modify by default displays windows Explorer then this file Type is NOT DISPLAYED. This would increase my available in 5 to 10% screen space. How do us set up so that the file type is not a default column in windows Explorer?

• How can I make folders containing media files in Vista act as normal when files displayed in Windows Explorer.

  Vista handles the media completely differently, and I hate it.  I want to deal with media files as normal files, so I can see, size, date, etc. All previous versions were very good.

  Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program AutoSizer to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Why can I not see the files in my Windows Explorer document library?

  I saved several PDF files in a folder in my library of documents, but I can't seen from Windows Explorer.  When I go to save another file, I can see the previous ones I saved from the browser to 'Rescue', but I don't see them anywhere else.  Why not?

  The padlock icon means that the files are not shared with others.  If you right click on the folder and choose "Share with" menu, you can remove the lock (but doing so allows anyone on your network to see your files).

  Regarding files jpeg appears not, have you tried pressing F5 to force the file to refresh?
  If this does not work, please respond and let me know.  It could be that the files are not saved to your documents, but in fact a system such as "C:\Program Files\Ancentry\" folder.

• How to convert a WPL of music file in my Windows 7 to an MP3 for a Sandisk Clip Sport formart

  Song downloaded to Windows 7 Media Center. It is a WPL format, but I can't play on my SanDisk Clip Sport MP3 player because the player does not support this file format. How can I change the WPL to MP3 format?

  Hi Natalie - WPL is a playlist file and cannot be converted to mp3 because it contains only pointers to the actual music files. You need locate the actual music files and transfer them from there. (They may not be no need for conversion - it depends if they are in a format supported by the SanDisk card - it seems to support usual ones).

  Cheers, Ric.

• Why can't I open files nave through Windows Explorer 7

  I have the latest version of nikon view nx Windows 7 Home premium.  NEF files open through the view nx but I can not windows 7 to associate files with view nx so nave so cannot open files with nx view through Explorer.  He used to work in windows vista.

  Click right a NAVE in windows Explorer, and then open with. You may need to browse
  for NX. Select it, and then click the check mark to always use this program.
   
  On Friday, July 16, 2010 20:01:24 + 0000, dave61 wrote:
   
  > I have the latest version of nikon view nx Windows 7 Home premium.  NEF files open through the view nx but I can not windows 7 to associate files with view nx so nave so cannot open files with nx view through Explorer.  He used to work in windows vista.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• How to view file attributes in Windows Explorer for .jpg, .doc, .txt, IE?

  How can I show with Windows Explorer the file attributes i.e. .txt, .doc, .jpg, etc.. ?

  Launch Windows 7 Pro (64 bit)

  Your help would be most appreciated.

  If you use Windows 7, go to Tools - folder options, or just click 'alt + T + O'

  Then click on the "View" tab

  Uncheck the 7th...

  Now the files are displayed with their attributes