Details of the UMS and SOA provider notifications in the EM console

Similar Questions

• Calculation of the licenses for Weblogic and SOA Suite

  Hi gurus,

  Being an oracle DBA, I give myself a task to calculate for a weblogic suite and soa oracle licenses. I went through a few docs, but there are many jargon that I didn't understand.

  If someone could please help me get information below

  (1) how the oracle County allows for WEBLOGIC and SOA suite. Does rely on the counts of base as in the case of Enterprise edition?

  (2) how to find information on licenses. Any support notes?

  Kind regards

  Lancerique.

  Hi there Lancerique,

  (1) how the oracle County allows for WEBLOGIC and SOA suite. Does rely on the counts of base as in the case of Enterprise edition?

  Oracle has the licenses of WebLogic Server (Enterprise Edition and Suite) and SOA Suite in the same way they do for EA DB, i.e. using the basic factor and multiplying by the number of cores. I'm sure you're familiar with the hard and soft political partitioning of Oracle (to run the Oracle products in virtualized environment)

  (2) how to find information on licenses. Any support notes?

  As for the database, Oracle provides "Licensing information" contained in the documentation. You can find details about what is included in each of the FMW SKU licensed by Oracle. For the 12.1.3 version, you can find the license here news - Oracle Fusion Middleware Licensing Information Manual® - materials.

  You should consider the development and test environments, if you plan to build their. They must also be licensed.

  And one more Council - as FMW products consist of several components, if you want to run the individual component on different machines (for example, Oracle BAM and Oracle SOA on a machine running on another) must summarize all hearts (in the example for the two machines) that run the prod.

  And when you're done with the counting I recommend contact you the representative office of Oracle you check the calculations.

  Hope this helps,

  A.

• details on the subinventory and purchases information table

  Hi all
  
  
  I have this requirement to withdraw a report of all the spare parts and other items in stock organization, that are active, ERP with details of recent purchases. If the purchase information are not available, the provider name field should be empty. also to provide the unit of MEASURE, inventory org and under inventory information too against each item.
  
  I tried the following query of the responsibility of super user INV abc

  select DESCRIPTION,segment1,segment2,segment3,PRIMARY_UOM_CODE,PRIMARY_UNIT_OF_MEASURE ,
  organization_id
  from mtl_system_items where 
  rowid IN 
  (
  select rowid from 
  (
  select rowid, row_number() over (partition by SEGMENT1 order by null) rn from mtl_system_items
  where  INVENTORY_ITEM_STATUS_CODE ='Active'
  
  and    organization_id  IN (105,121)
  ) 
  where rn = 1
  )

  kindly guide me to include information subinventory, when the master item form is opened in tools there is point Subinventory, I'm not
  able to get the name of the table that is associated with subinventory, so point I could include in my query
  also how can I get the information of public procurement
  
  kindly Guide
  
  thanking in advance

  could please guide as to the info column a be extracted in the query for the details of the purchases of the po_lines_all table

  Depends on what details you need. You can get the price of po_lines_all

  What wud column also show subinventory information

  Use secondary_inventory

  is it possible to display these items too who do not subinventry, the markets, the seller Info

  You must use outer joins (please google the term and go through a few examples)
  Try the following

  SELECT DISTINCT msi.description, msi.segment1, msi.segment2, msi.segment3, msi.primary_uom_code,misalv.SECONDARY_INVENTORY,misalv.source_subinventory,
  pov.vendor_name,
                 msi.primary_unit_of_measure, msi.organization_id
            FROM mtl_system_items msi,MTL_ITEM_SUB_INVENTORIES_ALL_V misalv, po_lines_all pla,po_headers_all pha,po_vendors pov
           WHERE msi.inventory_item_id=misalv.inventory_item_id(+) and
             msi.inventory_item_id= pla.item_id(+) and
             pla.po_header_id=pha.po_header_id(+) and
             pha.vendor_id=pov.vendor_id(+) and
              msi.organization_id=misalv.organization_id(+) and
             inventory_item_status_code = 'Active'
             AND msi.organization_id IN (105, 121)
  

  Hope this helps,
  Sandeep Gandhi

• No detail at the Journal approval via the Notifications window

  Hello
  
  Approving the Journal entry via the Notifications window the user cannot see the detail of the newspaper. Liability has reviewed / Post and survey / Journal. Is the journals / access needed to be able to see the details of the Journal?
  
  Thank you
  Syvelle

  Hello

  What is the version of the application?

  Please see these documents.

  Note: 197658.1 - 11i - Workflow 2.6 - unable to drill down to details of the Journal through Notification by E-mail
  Note: 737062.1 - R12: Notification of approval Journal giving details of the Journal or newspaper icon
  Note: 294738.1 - Journal approver cannot see the batch Total or details

  Thank you
  Hussein

• Want the link to open the mode required EAS IN WEb and details of the Java API

  Want the link to open the EAS IN WEb mode as well as the details of the Java APIs necessary to get to the top and running.
  Please provide the response if known.
  Thank you.

  Hello

  To connect to EAS on the web, it is http://: 10080/easconsole/console.html
  You should not have any API details make you just as you have a JRE installed, preferably a version 1.5

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Updated software iOS 9.3.3 and stop receiving notifications of the iPad

  I updated my iPad 2 for iOS 9.3.3 and stop receiving notifications or imessages. The do not disturb button is not enabled and the apps are put in place to inform. I reset the network connections on my iPhone and iPad, rebooted several times and reset the wifi from home several times. My iPhone 6s receives iMessages and notifications as it should. Plus my MacBook Pro not also gets iMessages after that I updated its software to the latest version. Can someone please?

  Tap Settings > general > reset > reset all settings and set up your notifications on your new iPad > Use of Notifications on your iPhone, iPad and iPod touch - Apple Support

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• I bought a new Iphone 5 s of Snapdeal in India, but when I created an account in the App store and next step his asking me to specify the details of credit card and the iTunes gift cards and codes I don't have an option to select none that I just

  I bought a new 5s of Iphone of Snapdeal in India, but when I created an account in the App store and next step his asking me to specify the details of credit card and the iTunes gift cards and codes I don't have an option to select none I just an options to select Master card, Visa and Amex. So what should I do to continue without entering a those sections.

  This step must be completed before you can go to the next step in creating an App Store account. It is only for the purpose of verification and just incase accidentally make you an in - app purchase.

  You cannot create an App Store account without card number.

  I hope this helps.

  AppleMan

• Is it possible to get the details of the file (for example the subject and comments) off the screen and to an Excel file or a text file without having to retype this information

  Is it possible to get the details of the file (for example the subject and comments) off the screen and to an Excel file or a text file without having to retype this information

  * original title - file details *.

  Hello

  Could you explain what is exactly? What do you mean by off the screen?

  According to my way of thinking, you want to export the file details of all your files on your HARD drive to an excel file or a txt file. If I'm right in this case, it is not possible to export the details of each & every file in the excel sheet.

• Get information from my computer about the details of the graphics card and so on, in order to install games.

  From the control panel > Performance and tools > can't view and print details of the basis of the normal English Windows experience index. See below. This is what is displayed in Notepad.  The reason why I'm doing this is because I was not able to install Games 2/2, I bought. The guy at EB Games says print a list of information on the computer so that I could buy the appropriate game. I would like to have a game on my computer. My friend recommended to Doom 3. Is there something that exists and why I receive this report not readable?

  
  

  Check this similar thread:

  Printing performance information

  In the end, make sure that HKEY_CLASSES_ROOT\htafile\Shell\Open\Command is set to one of the following values, depending on the architecture of the operating system:

  x 64:
  c:\windows\syswow64\mshta.exe "%1" % *.

  x 86:
  c:\windows\system32\mshta.exe "%1" % *.

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution.

  Political pe Windows license, the terms and conditions of redistribution

  I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution

  For more information of WinPE 2.0, you can consult the following articles:

  http://TechNet.Microsoft.com/en-us/magazine/cc138016.aspx

  http://TechNet.Microsoft.com/en-us/magazine/cc160884.aspx

  http://TechNet.Microsoft.com/en-us/windowsvista/aa905120.aspx

  J W Stuart: http://www.pagestart.com

• How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Original title: deleted user accounts.

  Hi guys,.

  I want to know the activities of a user whose account has been deleted. How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Hello

  Thanks for posting in the Microsoft Community.

  There is no newspaper available for the activities of the user. There are just a few activities of windows and the error logs is stored in Windows.

  Hope this information helps.

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• Parsing xml and store the details in the hierarchical tables

  Hi all

  I'm trying to parse a xml code and store the details in the hierarchical tables, however, I am unable to analyze the child attributes of tags and store the details in relational format.

  Oracle - 11.2.0.4 version

  My XML looks like in below:

  <Root>
  <ParentTag name="JobName" attrib1="Text" attrib2="SomeOtherText">
    <ChildTag childAttrib1="SomeValue1" childAttrib2="SomeValue2" />
    <ChildTag childAttrib1="SomeValue3" childAttrib2="SomeValue4" />
    <ChildTag childAttrib1="SomeValue5" childAttrib2="SomeValue6" />
  
    <OtherChildTag childAttrib1="SomeValue1" childAttrib2="SomeValue2" />
  </ParentTag>
  </Root>
  
  

  The table structure is as follows:

  create the table parent_details
  (
  job_id number primary key,
  VARCHAR2 (100) job_name,.
  job_attrib1 varchar2 (100),
  job_attrib2 varchar2 (100)
  );

  create the table child_details
  (
  child_id number primary key,
  number of parent_job_id
  child_attrib1 varchar2 (100),
  child_attrib2 varchar2 (100),
  Constraint fk_child_details foreign key (parent_job_id) refers to parent_details (job_id)
  );

  After analysis, I would expect the data to be stored in the format below:

  Table Name:-
  parent_details
  ID Name     Attribute1  Attribute2
  1  JobName  Text        SomeOtherText
  
  
  ChildTable (Store Child Tag details)
  ID Parent ID Attribute1  Attribute2
  1  1         SomeValue1  SomeValue2
  2  1         SomeValue3  SomeValue4
  3  1         SomeValue5  SomeValue6
  
  

  I tried following SQL, but it does not work. Please suggest if the same SQL can be improved to get the details in the expected format or should I use another solution.

  select job_details.*
    from test_xml_table t,
         xmltable ('/Root/ParentTag'
                    passing t.col 
                    columns 
                      job_name varchar2(2000) path '@name',
                      attribute1 varchar2(2000) path '@attrib1',
                      attribute2 varchar2(2000) path '@attrib2',
                      childAttribute1 varchar2(2000) path '/ChildTag/@childAttrib1'
                  ) job_details;
  

  I'm not forced to have a SQL solution, but would if it can be in SQL.

  Kind regards

  Laureline.

  Post edited by: Jen K - added the SQL, I tried to build.

  Well, the XML contains hierarchical data, and SQL is a "dish" of data, so it's up to you to treat lines that are coming out of the flat style and determine how to get that in separate tables.

  Suppose that we have several nodes of ParentTag each containing several nodes of ChildTag...

  SQL > ed
  A written file afiedt.buf

  1 with t (xml) as (select xmltype ('))
  2
  3
  4
  5
  6
  7
  8
  9
  10
  11
  12
  13 ') of double)
  14-
  15 end of test data
  16-
  17 select x.p
  18, x.name, x.attrib1, x.attrib2
  19, including
  20, y.childattrib1, y.childattrib2
  21 t
  22, xmltable ('/ Root/ParentTag ')
  23 passage t.xml
  p 24 columns for ordinalite
  25, path name varchar2 (10) '. / @name'
  26, path of varchar2 (10) of attrib1 '. / @attrib1 '

  
  27, way to varchar2 (10) of attrib2 '. / @attrib2 '
  28 children xmltype road '.'
  29                 ) x
  30, xmltable ('/ ParentTag/ChildTag ')
  passage 31 x.children
  c 32 columns for ordinalite
  33, path of varchar2 (10) of childattrib1 '. / @childAttrib1 '
  34 road of varchar2 (10) of childattrib2 '. / @childAttrib2 '
  35*                ) y
  SQL > /.

  P NAME ATTRIB1 ATTRIB2 C CHILDATTRI CHILDATTRI
  ---------- ---------- ---------- ---------- ---------- ---------- ----------
  1 text JobName SomeOtherT 1 SomeValue1 value2
  1 text JobName SomeOtherT 2 SomeValue3 SomeValue4
  1 text JobName SomeOtherT 3 SomeValue5 SomeValue6
  JobName2 TextX SomeOtherT 1 SomeValue6 SomeValue8 2
  JobName2 TextX SomeOtherT 2 SomeValue7 SomeValue9 2

  Using the 'ordinalite' gives us the line number for this node in the XML file, so that you can identify each parent as well as to say who is the first record of this parent (because it will have a child with the ordinalite 1).

  An INSERT ALL tuition assistance we can insert into two different tables at the same time to keep related data... for example

  SQL > create table tbl1 (pk number, name varchar2 (10), attrib1 varchar2 (10), attrib2 varchar2 (10))
  2.

  Table created.

  SQL > create table tbl2 (parent_pk number, attrib1 varchar2 (10), attrib2 varchar2 (10))
  2.

  Table created.

  SQL > insert all
  2 when c = 1 then
  3 in the tbl1 (pk, attrib1, attrib2)
  4 values (p, attrib1, attrib2)
  When 5 1 = 1 then
  6 in the tbl2 (parent_pk, attrib1, attrib2)
  7 values (p, childattrib1, childattrib2)
  8 with t (xml) as (select xmltype ('))
  9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20 ') of double)
  21 select x.p
  22, x.name, x.attrib1, x.attrib2
  23, including
  24, y.childattrib1, y.childattrib2
  25 t
  26, xmltable ('/ Root/ParentTag ')
  27 passage t.xml
  p 28 columns for ordinalite
  29, path name varchar2 (10) '. / @name'
  30, path of varchar2 (10) of attrib1 '. / @attrib1 '
  31, path of varchar2 (10) of attrib2 '. / @attrib2 '
  32 children xmltype road '.'
  33                 ) x
  34, xmltable ('/ ParentTag/ChildTag ')
  passage 35 x.children
  c 36 columns for ordinalite
  37, path of varchar2 (10) of childattrib1 '. / @childAttrib1 '
  38, path of varchar2 (10) of childattrib2 '. / @childAttrib2 '
  39                 ) y
  40.

  7 lines were created.

  SQL > select * from tbl1;

  PK ATTRIB1 ATTRIB2 NAME
  ---------- ---------- ---------- ----------
  1 text JobName SomeOtherT
  2 JobName2 TextX SomeOtherT

  SQL > select * from tbl2.

  PARENT_PK ATTRIB1 ATTRIB2
  ---------- ---------- ----------
  1 SomeValue1 value2
  1 SomeValue3 SomeValue4
  1 SomeValue5 SomeValue6
  SomeValue6 2 SomeValue8
  SomeValue7 2 SomeValue9

• Get an error message that says: we have detected an incompatible driver.  To get a better reading performance and faster, update your display driver.  View the details of the driver: ATI technologies Inc. - AMD Radeon HD 7640 G 3.0.11774 Compadtibilty Pro

  When I start the first items 11, I get an error message that says: we have detected an incompatible driver.  To get a better reading performance and faster, update your display driver.  View the details of the driver: ATI technologies Inc. - AMD Radeon HD 7640 G 3.0.11774 compatibility profile context.  My computer crashes when I click OK.

  It should be in the same place. But do not set your Folder Options to show all files, or you won't see it!