details on the subinventory and purchases information table

Similar Questions

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for 20 for detail header and 30 for the footer

  How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for header, 20 for retail and 30 for the footer.

  Here is the sample file

  DDWTYBILL13092502572 1000000112\\NHLSFS\ORACLE\ORACLE\BILLING\VERIFY\ 2013/09/25 01:19:08 BILLEND

  DDWTYBILL13092502572 2000000212PRIVATE PRIVATE STY5572142 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731543 Suspect 91TB? (AC) EMPIEEM A2 Z03.0 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000312PRIVATE PRIVATE STY5572149 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731548 empyema GMP A2 Z03.9 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000412PRIVATE PRIVATE STY5572351 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731584 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000512PRIVATE PRIVATE STY5572352 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731585 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000612MAJOR MAJOR STY5577530 010700 INV 12ZTYG000009 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS ZOZI, S, SIYAMBONGA 27 March 2010 TYG D3 DR MARCELIN 5602181 113799662 TB731663 lymphadenitis Ward D3 TYGERBERG HOSPITAL I88.9 Z03.9 07-AUG-201307-AUG-201324-SEP H1 - 2013MEND 58,52

  DDWTYBILL13092502572 2000000712MAJOR STY5577537 MAJOR 010700 INV 12ZTYG000009 06-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS DLAMINI, N, SIMON TYG 9 October 1976 F1 DR WZESE 5602181 135524676 TB731666 Suspect Ward TB F1 TYGERBERG HOSPITAL Z03.0 Z03.9 H1 07-AUG-201314-AUG-201324-SEP - 2013MEND 58,52

  DDWTYBILL13092502572 30003034120000003032END

  You can create a nXSD the use of the Native Format generator and advanced search attribute is used to read values to a specific position and use it as the choice. You can find an example here

  http://docs.Oracle.com/CD/E11036_01/integrate.1013/b28994/NFB.htm#BGBBAJFD

• Ask about the creation and filling I$ table on different condition

  Hello
  I have a question about the creation and filling I$ table on a different condition. In which condition the I$ table creation? And these conditions are given below:
  
  (1) * source and transit area * are on the same server (that is to say target is located on another server)
  (2) * gathering and target area * are on the same server (IE source is on another server)
  (3) * source, transit area and target * are * different 3 * Server
  Source 4), area transit and target are on the same server
  Thank you

  I'm not quite clear to your question. Always try my best to erase it.

  In your all over requirement I$ table will be created.
  If the same staging as target (a database, a user) then all temporary tables are created in this user
  If the scaffolding is different from the target (a database, two users (A, B)), then all temporary tables will be created under that user A (lets consider) and the data will be inserted into the target table that is present to user B

  Staging is different from the target (two database, two users (A1, A2), architecture not recommended) if all temporary tables will be created under that user A1 (A1 of the databases) and the data will be inserted into the target table which is present in user A2 (A2 data base)

  If the source, staging, the target will be under a database then no. LKM is required, IKM is sufficient to load the data into the target. Especially for this, you can see an example given by Craig.
  http://S3.amazonaws.com/ora/ODI-Simple_SELECT_and_INSERT-interface.swf

  Thank you.

• Bring out the detail in the clouds and snow

  It is a bit of a how-to-use-camera-raw kind of question.

  When we were in PV2003/2010, I used to develop winter scenes by reducing the brightness of 50 to near zero, and boost the exposure to conform return to normal. This took effect to stretch the highlights and details in the snow and clouds. I guess it was a far-fetched Gamma adjustment.

  Now, we have PV2012, I used large negative values of facts highlights and was making it back by increasing the whites. I'm not sure that it is as effective. The histogram does not seem to change much. I count on Photoshop plug-ins to improve the details.

  Can anyone suggest a way to achieve a similar evolution of gamma in PV2012?

  Rocks of PV2012 for this photo. -There is absolutely * no * 'white mud' syndrome in this one!

  The secret? you have to crank the exhibition way down, and white upward as needed.

  PS - Inflection Point for contrast slider is set high way due to the massive clump of tone at the top, so you can actually get better intra-"highlight" spread by increasing the contrast only by it - decreasing somewhat counter intuitively (and the reverse is true in many photos).

  Try these settings:

  Adobe Standard profile

  Exhibition - 3.2

  Contrast + 25

  Highlights - 50

  Shadow + 50

  White + 83

  Black - 30

  (no point curve or whatever of tone curve)

  No clarity not necessary AFAIC.

  Awesome! (and these settings, very probably more spread/contrast than what you want, so consider sweetening up the good to go).

  

  UPDATE: there are no snapshots in there, so I started at ground zero, which means no lens correction. If you enable lens corrections, you need to calm down a few notches whites, or better yet: throw some - time strong gradients down: a large diagonal one starting in the lower right corner and one other smaller horizontal in the sky - oo - Yes...

  ,

  Rob

• difference between the external and UTL_File utility table

  can someone clearly explain me what is the difference between the external and UTL_File utility table? and what case to use utl_file and external table?
  
  
  
  Thanks in advance.

  Hello
  To get a clear idea on the check of the external table link below

  http://www.orafaq.com/node/848

• Details of the Folios and In - App purchases

  Hello

  How the folios of detail (as managed in Folio Producer) and in-app purchases related?

  In other words, when I add a new in-app purchase for my new folio in detail in my multi-folio application. How does my app know what folio is related to what purchased in-app, I added in iTunesConnect?

  In iTunesConnect, I attribute a price level for my in-app purchase. How the Multifolio application that is given folio and not one which must be that the price level?

  Thank you!

  In iTunes Connect, you create a product ID for each in-app purchase, usually in the form of com.publisher.appname.issuename. When you publish the folio, you indicate what product ID. That the links of the folio to the in-app purchase.

• Mistakenly clicked on the image and purchased. I need to get a refund.

  How can I get credit for the image. I just scroll the search results, the mouse has caught up under the keyboard and clicked by mistake. In one click the image which bought without even a confirmation message or require at least two clicks to buy it. Also, is it possible to change the purchase 1 click the search results? I would never use this option without reading the details first.

  Hello

  I added a picture of credit to your account in order to replace the image uploaded in error.

  Thanks for your comments.

  Concerning

  Bev

• Need details on the tablespace and storage used by the queue oracel

  Hi all
  
  I'm working on the lines of the Oracle. I need some details about the storage space of the queues.
  
  1. is it mandatory that we have space separate for the queue table? What will happen if we run out of table space? Lose us data?
  2. how much storage space is required for a queue of the oracle?
  
  Please suggest me on this.

  Hello

  946965 wrote:
  1. is it mandatory that we have space separate for the queue table? What will happen if we run out of table space? Lose us data?

  No - it is not necessary to separate queue objects, you can do however purely for the simplicity of space management, but is certainly not a requirement. Space missing in a storage space for a queue is not different to press space to a normal process - Oracle will trigger an error ("ORA-xxxxx cannot extend... ") and the process trying to NQ to the queue will fail or do what it has been coded so that error." So, if your code NQ did something stupid mistake so I guess it's possible loss of data in case of error (not only exhausted space) but in general I'm expecting the process to report the error and stop.

  946965 wrote:
  2. how much storage space is required for a queue of the oracle?

  It is depends entirely on how you plan to use the queues, queues are not generally intended for long-term data storage, they do not perform well for this - they work better with the message in. message on (enqueue | dequeue) so unless you intend to leave messages in the queue for long periods of time I expect no significant space consumption. But only you guys can really work it to according to the type of user data and how long messages remain in the queue.

  There are some useful notes on My Oracle Support on the management of the space occupied by the queues which is very important for performance, for example
  How can I reduce the high watermark (HWM) of advanced queue objects? (Doc ID 421474.1)

  Hope this helps,

  Paul

• Details of the book and the associated account. URGENT

  Ahsan/Navin,
  
  The issue revolves primarily around dimension table and incremental load. If we get out SCD1/2 off stage for now, could it please answer Yes or no for the sub questions? Please, it's kind of emergency because the customer is really concerned about these aspects of the transfer of data in incremental loads. As always, appreciate your quick response. Suppose that this first full charge has been made.
  
  1. If we change a key field (effective date) of an account that is not a new transaction associated with it in the accounting - change will come after an extra charge?
  2. If we change a no key field (title) to a date of prior application for an account that is not a new transaction associated with it in the accounting - change will come after an extra charge?
  3. If we change a no key field (title) at an earlier date of an account that has a new transaction associated with it in the accounts - it will reflect after an extra charge?
  4. in the course of a full/incremental load process, 1st loaded dimension right tables? Otherwise and made are loaded first, they wont mistake seeing that no details of associated dimension does exist?
  5. we have a few custom tables that is not any sort of a column of datetimestamp. Is bringing all over every time load happens, the only option? What is the best method to deal with such situations?
  
  Thank you
  Dan

  For your first 3 questions, it depends on the DATE of LAST UPDATE in the main tables in the source system. This differs a little through the various systems of source, but in general, if the source system table has a 'Update Date' which is used as a filter for the load increment SQL qualifier, then he will grab this record... and if you have Type 1 SCD, the whole line is updated for all areas. If you have a Type 2 SCD enabled, then ONLY the dimension columns that are part of the TYPE2_DIFF will be result in end dating the existing record and the Iinserting a NEW record. So the SCD Type 2, to see if additional columns should be added to capture the story. OOTB only the records in the TYPE2DIFF are compared for the capture of history.

  For your other questions:

  4. in the course of a full/incremental load process, 1st loaded dimension right tables? Otherwise and made are loaded first, they wont mistake seeing that no details of associated dimension does exist?
  A: Yes, Dims are usually responsible first for each star schema. Note, however, that there are sometimes persistent implementation stage and other auxiliary tables for facts which can be loaded but that if STUMP in general Yes, before the FACTS.

  5. we have a few custom tables that is not any sort of a column of datetimestamp. Is bringing all over every time load happens, the only option? What is the best method to deal with such situations?
  A: If you NEED capture history on these custom tables, you can do this w custom changes made on the side of the DW via Informatica. If you do not need history then I don't see the problem with the reloaded each time... you have a large amount of data? If not, then why is it a problem?

• Transformation to define the schema and user on Tables in relational and physical

  I imported my Designer SDDM 4.0.1.836 deposit.  Now, I want to APP_SYS of subviews allows to define the schema on the tables in the relational model and the user on the physical model.  Our application in designer systems are 90% based scheme.  Here's what I have so far based on the example of OE and HR plans that I imported, built logical, then back to relational.  At this point, I have the tables by subview...  Line 24 is obviously incorrect.  Can someone give me a step by step approach to understand what I need to set the schema of the table and the user?  I looked through the read me file, xml files, the index and searched the known universe and am still confused.

  importPackage(javax.swing);
  // variable to keep a status message for later
  
  var message="";
  var schema="";
  
  // Get all subviews for Relational
      subviews = model.getListOfSubviews().toArray();
  for (var isub = 0; isub<subviews.length;isub++){
      subview = subviews[isub];
      message = message + '\n'+isub+" "+ subviews[isub];
      if(subviews[isub]!=null){
            if(subview == "HR_ERD"){
               shema = "HR";
              }else if(subview == "OE_ERD"){
               schema = "OE";
              }
           tables = model.getTableSet().toArray();
           for (var t = 0; t<tables.length;t++){
               table = tables[t];
               //check for presentation in subview
               tv = table.getFirstViewForDPV(subviews[isub]);
               if(tv!=null){
                   table.setSchemaObject(schema);  
                    message = message + '\n    '+ t +" " +shema+"."+ tables[t] ;
              }
          }
      }
  }  
  
  JOptionPane.showMessageDialog(null, message);
  //Packages.oracle.dbtools.crest.swingui.ApplicationView.log(message);
  

  Hi Marcus,

  First of all, you must make sure that the schema already exists in your relational model.

  You can use the method

  public void setSchema (String schemaName)

  to associate your Table with this scheme.

  (This method is defined on ObjetConteneur, so it can also be used to make and index).

  If you already have a user of your physical model that implements your schema, it is not normally necessary to create a user on the TableProxyOracle in the physical model.

  However if you do not want to set, then the method to use is

  public void setUser (user UserOracle)

  David

• Concerning the import and export of Table

  Hi team,

  My question is what is quick way to export and import the data in the table because most of the time I import and export data activate I usually

  If data less than 10 hundreds I'll use sql developer only export to insert the . script

  But my question if we lack 17 records dealing with import and export a table

  Note:-If we do not have conditional sys.

  Current version is using 9i and 10g

  Thank you

  Suman

  Data pump works only on 10g:

  ORACLE-BASE - Oracle Data Pump (expdp and impdp) in Oracle Database 10g

  Have a look here for more options 'pre - 10 g':

  Ask Tom & quot; export and import the best option to use in... & quot;

• How to find the lock and more information why the prg conc taking too long

  Oracle Apps R12-Orader management
  
  Hi all
  
  I am new to Oracle Apps, we I run my simultaneous program
  its taking too long to complete. How to find that there is a lock to produce in the table while that simultaneous execution of the program, another way to find why the simultaneous program takes too long to run and how can you speed up the process.
  
  Yesterday we made a few changes to speed up the process with our DBA to accelerate the simultaneous program
  
  The first simultaneous program takes 2 h 30 and after these changes taking 1 h 45. Please suggest it's okay
  
  Connected with the responsibility of the system administrator.
  
  Manager - set - Manager of the standard.
  
  Set the value of PROCESS like 15 (instead of 10).
  
  Set the value of SECONDS of SLEEP as 10 (Changed from 30).
  
  Manager - set - Manager2 Standard.
  
  Set the value of PROCESS like 15 (instead of 10).
  
  Set the value of SECONDS of SLEEP as 10 (Changed from 60).
  
  
  Any suggestion on how to find why it takes too much time.
  
  Any help is highly appricatable
  
  Thanks and greetings
  Srikkanth.M

  Hello

  I suggest you draw the simultaneous program and analyze the trace file. To do this, mark the simultaneous program as Trace enable (RESP system administrator, Menu simultaneous > program > define) and then run the program and download the trace file after dealing with tkprof. Check which are the staements who take most of the time and try to optimize them.

  It will be useful.

• Details of the distribution and sharing purchased Images

  I bought a few images to create posters for my fonts. The posters are my fonts and my address of Web site... so the images are not autonomous. I had a few questions to make sure that I understand the terms.

  I do not share the images on social media, but what happens if other people do... will I get in trouble for this? Do I have to track down people when sharing pictures?

  In addition, add poster to other sites that I submit my fonts to? It requires a credit on these sites because I'm not the owner?

  Yet once again, the images are not autonomous, as they have my fonts and site info included on them and posters are of low resolution.

  Thank you in advance for your help!

  As long as you don't sell the image so you should be although I would say only to what you posted. When in doubt, it is best to include a small credit.

• Easy way to set up the trial and purchase

  Is there an easy way or one ti library implement a trial and buy the license model?

  Best regards

  Levion

  Have you considered to build this in your application?

  1. Setting up a digital good representative "buy" as the user can buy to unlock all the features of your application.
  2. Record a timestamp in memory when the user installs or opens the first app.
  3. If 'buy' digital has been purchasing, always check at the start of the application.  If it's not, and if the timestamp is greater than X length of time (e.g. 5 days or 1 month), then display a prompt asking you to buy access to the rest of the content.

  Something like that?