Detect connected lines

Similar Questions

• detect digital lines

  I was wondering if it would be nice to remove the BVRP Software program to detect digital lines from my windows vista system.  It comes up that there is a problem with compatiablity when I restart count it.  I don't remember installing this and don't know if it is a program that was installed when I got the computer.  I have the digital line detect and the netwaiting programs of BVRP software, inc.  Any help would be greatly appreciated as I tried to speed up the computer.  Thanks in advance for any help.

  brighteyes4291

  BVRP software modem because their phone tools are often bundled with a new computer/modem with a built-in modem.  You can safely uninstall both programs you mention, but I'm not sure you'll see changes of speed on the computer.  The digital detection program is there to inform you if you connect your analogue telephone modem to a digital telephone line. This can damage an analog modem.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Why doesn't my computer series sony vaio y cannot detect / connects to a wireless connection

  Why doesn't my computer series sony vaio y cannot detect / connects to a wireless connection. only through connection cable/usb... Please help me... Thank you...

  Hi JaqD,
  to go with that said Brian, more in detail the best options, we can give you.
  In the meantime, here are some generic troubleshooting steps:
  http://support.Microsoft.com/kb/313242

• Why I can't access these three drawing annotations: cloud, polygon, draw connected lines

  Why I can't access these three drawing annotations: cloud, polygon, draw connected lines

  You probably touch the Active Mode. There is button on toolbar s where you can stop or use the following preference parameter:

  Tools > Preferences > General > Touch Mode > never

• detect connections of the remote panel?

  Is it possible for my VI to "detect" when someone has connected with a command remotely, and asked the control?

  I have a problem (because of the size and complexity of my VI I'm sure) that when a RP takes control, after a period of time, the main VI starts to slow down and begins to lose data (this comes from a TCP connection)!

  I would like to know when a RP takes control and disconnect them automatically after a period of time (5 min?).  I know that there is a connection on the web page of publication delay, but it seems that come into play if 1 RP control and another actually demand.  I need to be able to limit the time to control a single RP.

  How about these functions?

  

  If you look at the Help menu for 'Customer login' it is very useful.

  Using the output of 'connection', you can index this table to obtain useful information on the current client.

  You can then use a little logic timing to allow them to connect only for a specified time.

  Then you deport 'em with 'close connection to the client.

• R61 cannot detect connection 108mps

  1 show only 54/11/300/54 access connections. So this means that it can only detect and use 300mps/54/11 and nothing in between. 108 and 270.

  I tried to upgrade to the latest version of the driver for wifi 4965agn and logins. But nothing works.

  Hi Andreas,

  I did a reading more on the difference between N and G network and only realize that the max speed for the G network is 54mps instead of what netgear claim on their machine wgt624, 108mps with only 802.11 g support.

  Thank you for your advice, I'll get a new router later.

  It's good to be in a forum... Thank you

  concerning

  Mathew

• Skyline administrator view do not detect connected users

  Hello friends of the community, I need your help

  I have a few desktop computers that do not detect when user connect to the office, view horizon Director of still images shows the Office according to availability.

  Environment have vsphere 6.0 and horizon see 6.1.1.

  Windowd 7 and customers from zero with the latest firmware of teradici as endpoints.

  Thanks to you all!

  On the virtual machine which connected watch, is not the WSSM. EXE running process in the Task Manager?

• Component ODI OWB 11 GR 2 How to connect lines inserted/updated to update / delete

  Hi experts,
  I developed an ICT KM which will insert into a target table data line-by-line, I used the ICT_SQL_INCR_UPD_ROW_BY_ROW KM of base provided by oracle, what I noticed, is that this newspaper does not work lines that are inserted as other KMs, after that a little research on the internet discovered that ODI has a function for this , oidRef.setNbInsert, but this doesn't work in OWB KM, it gives this error:
  --------------
  Traceback (innermost last):
  "< String >" file, line 305, inside?
  AttributeError: setNbInsert
  [12: 02:05] Szabo Adorian: org.python.core.Py.AttributeError (Py.java)
  org.python.core.PyInstance.invoke (PyInstance.java)
  org. $0 Python.pycode._pyx64.f (< string >: 305)
  org. Python.pycode._pyx64.call_function (< string >)
  org.python.core.PyTableCode.call (PyTableCode.java)
  org.python.core.PyCode.call (PyCode.java)
  org.python.core.Py.runCode (Py.java)
  org.python.core.Py.exec (Py.java)
  --------------
  
  Dose - anyone have an ideea how can I connect the inserted, updated, deleted in interface OWB lines (we have a customer who would like tho have this feature)?
  
  Enjoy a quick response,
  CIPI

  Hi CIPI

  Unfortunately, it is not included, the only possible audit for lines is via JDBC and properties explanations in KM.

  So not every API of ODI is supported, a large common subset is available, you can see the doc for more details (these audit would be useful);
  http://download.Oracle.com/docs/CD/E11882_01/OWB.112/e10935/code_tempates.htm#CIHIIJDI

  See you soon
  David

• Detect the line breaks in htmlText

  I know that you can identify line breaks when you work with text files by checking the equivalent of character, but are - can I do this with htmlText?

  I do a text editor for my client and I use the component textArea as input field with the data stored in an XML file. Everything is good, except for the line break - the textArea is rendered as htmlText so that the customer will be able to see the changes instantly. By default, it works, but the spacing is screwed (dashes, double spaces sometimes), so I decided to condense white space. With that, he got rid spacing issues since the html is rendered exactly as the code name. The thing is, hitting enter in the text box does not add < br / > the code htmlText.

  I need to replace the key of the entry with a custom function that inserts an ine jump when you use the text box, or there at - it a way to detect and convert these line breaks in htmlText?

  don't you see

• Satellite A300-24Z - windows does not detect connected sata hdd

  Hello

  Ago that I bought the new laptop Toshiba Satellite A300. A few days ago, I decided to plug in my old laptop HARD drive - drive is Toshiba MK1234GSX - my new laptop via sata to esata cable. Problem is that windows does not detect a new device, by itself, nor in the Device Manager. Is it possible to do this drive works?

  Thanks for help.

  Hello

  Have you tested other drives?
  This should be checked!

  Please go to BIOS and adjust the default BIOS by pressing F9 button in the BIOS settings.
  Save the changes, and then try again

• Scan in Officejet 4500 without fax connected line

  I don't have this printer online. (For faxing once in the 12 months before you disconnect it.) How to scan documents now? The current set up seems to require a fax line.

  Hi @OfficeUser ,

  It's perfect, thanks for your information!

  I found a very detailed guide to help analysis. You can choose your options as you go.

  How to perform a scan: OS X v10.8

  I hope this helps you!

  Best wishes

• Yoga 2 pro falsely detects connected headphones

  Hey

  My Yoga pro 2 will come I am satisfied, if not delightfully has a problem with the audio input jack. At startup, it falsely detects that headphones are plugged, which leaves me with no sound in speakers. I tried to update drivers more recent, but it does not help.

  I'll be grateful for any help, thank you

  To me it looks more like the anomaly of the electric circuit as a driver problem. I believe that this case should enter through the standard product warranty if your Yoga 2 is still covered by a warranty.

• Error message: the remote device or resource does not accept the detected connection

  I had this problem for months at this point. The common way with that I solve is to restore to a previous point. Once restored, but I can't stop or restart the PC without the same problem occurs. For this reason I only turn sleep mode and then the connection is working. But by mistake an update made me restart automatically and now I'm back to the previous question. I downloaded and saved a substantial amount of data from my last restore, so I was wondering if there is a practical solution to this problem?

  Original title: perfect connection, but can not use the web or programs that require connections

  Hello

  Thanks for posting your question on the Microsoft community.

  Who are you referring when you say, "web or programs that require connections"?

  It seems that your antivirus software is blocking the connection internet or computer is infected with a malware or a virus.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:

  You can disable your antivirus and check if it helps.

  Reference:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, use method 3.

  Method 3:

  I also suggest you use Microsoft security to check the virus or malware scanner.

  Refer to this article:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How to find the connection line

  Hello

  I have a spatial table with geom type in 2002.

  I have a set of line (for example say it's 5 rows) attach image.

  I need to find the line that is internal linking to these 5 rows. I mean, it's a dividing line has the inside line.

  I am unable to get the inner lines of a border.

  If I have a spatial query table I get limit but I want inner lines.

  Fix is instant for ref.

  Thanks in advance

  Saaz

  This is because CONCAT_LINES does not create a polygon, it only concatenates lines in a new line. But always a line (even if the endpoint and the starting point of this line may be the same).

  It might be a good idea to start reading the Documentation space: content, since it seems that there are some concepts in Oracle Spatial, which are not clear to you. Basically: there is no simple easy feature to create a polygon of a bunch of lines delivered with Oracle, you will need to create one yourself.

  Concat_lines might be a start, however, that allows to create a line, then check the endpoint and the starting point: if they are identical, you can create your polygon. Is they are not the same, you can copy the starting at the end point. You can then change the GTYPE and the Ansdo_elem_info so that the entire element becomes a polygon. With a polygon you can use inside effectively to get the results you want. I don't have access to my environment of development here, so can't help you build something right now. But maybe someone else has something already?

  Oh, and after the fact: do not store your polygons in a temporary table, but change your datamodel and begin to use them properly. Temporary tables will be only complicate things more.

• Color in connection line

  HI friends
  
  I want t display line with color as this report
  
  [http://apex.oracle.com/pls/apex/f?p=267:5:: http://apex.oracle.com/pls/apex/f?p=267:5:]
  
  
  
  Thank you

  Hello

  You must change your report model, although it is usually best to create a new model based on a copy of your existing.

  1 - Go to the shared components
  2 - Select models
  3 - Click on create
  4 - Select report
  5 - Select "as a copy of an existing model", and then click Next
  6 - Select the application to copy the template from, then click Next
  7 - Select the theme to copy the template from, then click Next
  8 - in the list of templates, find the one you want to copy. Change the name of "copy to...". "and select Yes in the copy column
  9 - click the button copy a report model.
  10 - once the model has been created, scroll the list of patterns to find and click on the link in the name column to change
  11. in the models section of the column, you should see 4 sets of parameters - the model of the column 1, 2, 3 and 4
  12. According to the model of what you copied to 1 or more of these may contain parameters. If they don't, copy all three parameters in the three settings below them - so the parameters of model of column 1 move to column model 2 parameters and so on. But make sure the model column 1 still has a copy of the original settings in
  13. now, you can only edit 1 model column settings to add your color. What you change depends on what your template/theme, but as an example, if the original template parameter was:

  <td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t18data">#COLUMN_VALUE#</td>
  

  You can change this:

  <td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t18data" style="background-color:red;">#COLUMN_VALUE#</td>
  

  14. now, you will need to enter the details of how Apex is to identify which line needs to use this new model. This is done in the settings of Condition and Expression and will depend on what is the condition. In my example page, the condition was that this 5 column (the column deptno) is equal to 10. Thus, the Condition is "Use based on the PL/SQL Expression" and the Expression is:

  '#5#' = '10'
  

  #5 # represents the 5 column and it's in quotes, as the comparisons should be made as strings. As long as column 5 '10', then the model will be used. If it contains anything that any other models that you moved down to 2, 3 or 4 will be verified. You must, therefore, always make sure that each record will satisfy one of the conditions (this can match more than one, but only the first one found will be used)

  Andy