detect connections of the remote panel?

Is it possible for my VI to "detect" when someone has connected with a command remotely, and asked the control?

I have a problem (because of the size and complexity of my VI I'm sure) that when a RP takes control, after a period of time, the main VI starts to slow down and begins to lose data (this comes from a TCP connection)!

I would like to know when a RP takes control and disconnect them automatically after a period of time (5 min?).  I know that there is a connection on the web page of publication delay, but it seems that come into play if 1 RP control and another actually demand.  I need to be able to limit the time to control a single RP.

How about these functions?

If you look at the Help menu for 'Customer login' it is very useful.

Using the output of 'connection', you can index this table to obtain useful information on the current client.

You can then use a little logic timing to allow them to connect only for a specified time.

Then you deport 'em with 'close connection to the client.

Tags: NI Software

Similar Questions

  • Is it possible to limit the number of connections to the remote panel to a vi?

    Hello

    I have an application that runs on a PXI RT system and I use the remote control to access. My license allows me to have several remote connections and it's ok that I sometimes need to open several remote panels at the same time.  However, I would like to limit the number of connections for a particular VI 1.  Is this something that can be done?

    Kind regards

    Patrick Lessnick

    The way it can be done is to interview customers who are connected to the VI through a remote façade.  When you do that, you close the connection to anyone, but the first person who connected to the façade.  In this way, if someone is running the VI, no one else can connect.  Once they are made, someone else can then connect to the remote façade.  I created an example illistrates community this behavior.  You can find it here:

    http://decibel.NI.com/content/docs/doc-9673

    If you have any other questions, let me know.

    Scott

  • Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

    Hello

    Looking for help on this one...

    I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

    I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

    It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

    I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

    Impossible to extract the EpgLineups (error: unable to connect to the remote server)
    Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

    I'm starting to think it's a matter of windows.   Anyone have any ideas?

    Mark

    E-mail address is removed from the privacy *.

    On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
     
    > I'm starting to think it's a matter of windows.   Anyone have any ideas?
     
    See this thread
     
     
     
    __________________________________________________________________________________________________
    Barb
    MVP Windows Entertainment and connected home
     
    Please mark as answer if that answers your question
     
     
     

  • Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    Error is the standard:

    This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

    When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

    No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

    All computers on the domain work for RDP is only now a single computer.

    Error is the standard:

    This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

    When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

    No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

    All other computers on the work of field for RDP is only now a single computer.

    This post on the forum of MSFT Services Office to remotely help...

    http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  • PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

    Hello

    I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

    I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

    I have disabled the firewall on the PC and MAC

    I tried over ethernet and direct connections

    When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

    When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

    He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

    After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

    Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

    I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

    LOGS *.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

    2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

    2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

    2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

    2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

    2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

    Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

  • Apple TV constantly loses the connection to the remote

    I have the latest version of Apple TV and remote control (touch screen version). The TV will say that he has lost the connection to the remote control, and then a second later he will say that he has restored the connection. This is repeated every 10 to 30 seconds.

    It was before the last software update and still happens after him.

    Sometimes even if the remote is fully charged.

    It happens after restart of the Apple TV.

    Any ideas on how to solve this problem?

    Looks like interference to me, check your environment for other devices that may cause interference (babyphones, phones wireless, wifi, devices etc.)

  • Your computer cannot connect to the remote computer

    Hello

    OT:

    Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

    I implement the remote desktop session based on Win Server R2 2012.

    I create a free sign for certificate certificate and also install the certificate to the client computer.

    But when I click on any application it shows me error.

    Hello

    You may need to ask the question on the TechNet forums. Please post the question here:

    https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

    Kind regards

  • Remote Web Workplace 2011 connected to the remote PC lot

    I have a client who is having a strange question about Remote Web Workplace 2011.

    It will connect to RWW that herself as usual, but when it connects to the remote computer, I'll call him PC1, it connects to a different machine (PC2).

    I have logged on to the SBS server and made sure his remote PCs are configured correctly, she only has permissions for remote access to PC1, all other PCs have been disabled for the remote access.

    There were no changes made to the names of PC or anything.

    The server is a Windows Small Business Server 2011 Standard.

    If I have excluded any information please let me know! Any help/ideas would be greatly appreciated!

    Thank you

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Remote Desktop cannot connect to the remote computer

    Hi all

    I'm having a problem on my server running Windows Server 2008 R2.

    I can not can not on the remote server by using remote desktop (mstsc).

    Here is the error I get when connecting:

    Remote Desktop cannot connect to the remote computer to one of the following reasons:
    (1) remote access to the server is not enabled
    (2) the remote computer is disabled
    (3) the remote computer is not available on the network

    Make sure that the remote computer is on and connected to the network, and remote access is enabled.

    I tried to restart the services, but nothing helped.

    I even restarted the server, which did not help.

    Also, I can ping the server without any problem.

    Kindly help. !

    Hello

    Search logs events on the Terminal Server and the Local user's PC

    Try disabling the firewall - may have to be reconfigured.

    I suggest that repost you the question in the TechNet Windows Server forum for assistance.

    TechNet

  • This computer can't connect to the remote computer

    I have a Windows server 2003, and I am unable to distance on the server. The error message I get is 'this computer cannot connect to the remote computer.

    • I did a netstat - year to see if port 3389 is listening, does not see an entry for the port. I have
    • I checked the services and that they perform a remote procedure call (RPC)
    • Restarted the server several times.

    I can remote into other servers of this machine if I log in locally.

    Please advise,

    Michael McDaniel

    301-763-1160 off.

    Have you checked the firewall? Could be a firewall anti-virus that keeps you from log, as that happened to someone else on this forum recently.

  • Remote Desktop cannot connect to the remote computer to one of the following reasons:

    We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
    --------------------------------------------------------------------------------------------------------------------------------
    Remote Desktop cannot connect to the remote computer to one of the following reasons:
    (1) remote access to the server is not enabled
    (2) the remote computer is disabled
    (3) the remote computer is not available on the network

    Make sure that the remote computer is on and connected to the network, and remote access is enabled.
    --------------------------------------------------------------------------------------------------------------------------------
    We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

    Could you please help us on this.

    Hello

    Search logs events on the Terminal Server and the Local user's PC

    What is happening to all users?

    -If you get an error in the TS, then this is a client-side problem.

    -Take TCP Dump using wire shark and see who is the RST sendign package.

    Look for this error message in google that could give you light...!

    Kind regards

    Dhruv

  • I have problems connecting to the remote desktop on Windows Server 2008.

    I have many positions of work XP trying to connect to our servers to Server 2008 Remote Desktop, but get the message, "because of a security error, the client could not connect to the remote computer".

    When I check the version of remote desktop it uses, it is 5.2.3790 in program Files\Remote Desktop

    Now, if I go to Windows\System32, I find mstsc.exe and can connect to the same server perfectly.  But if I go to save the connection, RD is up to version 5.2.

    How can I remove the old version and just use the newest one?

    Thank you.

    Original title: a different version of the remote desktop

    Hi msenior,

    Thanks for posting your query in the Microsoft Community.

    Method-

    I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

    Your query will be better addressed there.

    Check out the link-

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

    We know if you need help. We will be happy to help you.

    Thank you.

  • The Client computer could not connect to the remote computer

    Hello

    Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

    They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

    They say:

    "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

    "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

    Hello

    You can read the following article and install the patch available to see if contributing to the issue.

    You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

    I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

    Windows XP IT Pro Forums.

  • "Error 720: a connection to the remote computer could not be established.

    Earlier, it was working fine. One day it stopped working. I don't write my windows key and the serial number of HP for reasons of confidentiality, but it is authentic.

    I use Windows 7 Home Premium on my laptop HP bought 4 months ago. While trying to connect to internet through my USB data card (I use Auntie Photon +) I get an error message "error 720: a connection to the remote computer could not be established. When I connect the same device to another laptop, it works fine. The USB card company suggests that it is a matter of TCP/IP and I need my OS resintall. I don't have any CD of windows with my HP laptop. I tried to restore my machine, but that did not help. Please help me.

    Hello

    Do the methods and check if this solves the problem.

    Method 1: Try to run the network troubleshooter, check the link for more information on the same.

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method2: You can try the steps outlined in the article and check if this gives a probable solution.

    "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

    http://support.Microsoft.com/kb/956196

    Reset Internet Explorer WARNING:
    Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

    I hope this helps.

  • Error connecting to the remote computer.

    Hello

    I am able to connect to the VIRTUAL LAN, but when connecting to the remote computer using mstsc, I get the error below 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

    Here are my details of machine:

    Name of the operating system Microsoft Windows 7 Home Basic
    Version 6.1.7601 Service Pack 1 Build 7601
    System model Inspiron N5010
    System Type x 64-based PC

    Antivirus:
    internet security Kaspersky 2012

    Please come back if you need furthur information.

    Could you please getback me ASAP.

    Thank you & best regards

    Anil.

    Hi Anil,

    You try to connect a Windows 7 Home Basic?

    You cannot use Remote Desktop connection to connect to computers that are running Windows 7 Starter Edition, Windows 7 Home Basic or Windows 7 Edition Home Premium.

    See the following Microsoft article.

    Remote Desktop connection: frequently asked questions

    Keep us updated on the status of the issue.

Maybe you are looking for