Detect wrap them edge does not

Similar Questions

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you.

  Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you

  I found the problem. I opened 'File' then saw 'save as template' grayed. Having not worked with models, I didn't know this isn't how it's done.

  What I should have done was file > save as > then clicked the drop-down 'Save as template' menu option. It was a simple mistake. Thanks to you all.

• I have two problems: 1) a theme that does not change the look of my Firefox at all 2) there is no button 'disable' for my themes only 'delete '. Help, please!

  Okay, so my problems are...
  (1) I downloaded a theme for the first time and when I did, it worked perfectly fine. After updating, I download the theme again and it helped, but the theme will not change the look of my browser. When I tried one of the relevant articles, I cleared my cookies and cache and downloaded the theme (A Blue Fox), installed and turned on, and it worked perfectly fine! I tried to upload another (Pink Fox), one installed and activated, but it did not work. Instead, he returned to the default theme. So I tried to clear my cache and cookies again and repeat the process, but now after downloading, it says "error".... "I don't know if it says"Error Downloading"or"installation error ". Now, I tried to download it again after turning off my computer and turn it back on again, but (today), the two has not applied to my browser. They both had the same look... by default! Please tell me what is the problem!
  (2) in my "Add-ons Manager" page, on the appearance tab, there is no button disable for my modules. Only the "delete" button is present.

  Please help me!

  NOTE: I already tried to reset Firefox, but it does not solve my problem.

  You do not disable a theme, but you choose another theme if you want to change the theme.
  
  Remove button is for when you no longer want this theme.

  You must select a theme and then close and restart Firefox, if you want to use this theme.

  If this does not work, then you may have a problem with the prefs or something interferes.

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

• computer does not detect blank cd and does not burn cd

  I did a full restore on my pc, nearly a year before and before restoring the computer was able to detect blank CD and burn the cd now after restoring I noticed, it won't detect CD or burn CDs. Pretty well, I did a search on google and tried almost all the tips on adding option "Save" to change the values in the registers. Any advice would be appreciated, thanks in advance.

  HP Compac dc 7700 small form factor

  32 bit

  HP s/n [edited personally identifiable information]

  p/n rw503us

  The version of the BIOS/date: Hewlett-Packard 786E1 v01.09. 05/01/2007

  SMBIOS version: 2.4

  Drive D:
  Description CD-ROM drive
  Loaded media no.
  Type of CD-ROM media
  Name TSSTcorp DVD - ROM TS-H353A
  Manufacturer (Standard CD-ROM drives)
  Status OK
  Transfer rate is not available
  SCSI Target ID 0
  ID device PNP-IDE\CDROMTSSTCORP_DVD-ROM_TS-H353A___BA08___\5 & EC81A8F & 0 & 0.0.0
  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  Hello EddieBonza,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are experiencing problems when your optical drive does not recognize blank disc. I'm sorry, but to get your question more than exhibition, I suggest posting in the trade forums, as the Hp Compac dc 7700 small form factor is a commercial product. You can do to the company - Compaq, Elite, Pro PC.
  
  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• Bluetooth kit S430 Edge does not work on Win8

  After I did a clean install of Windows 8 in my ThinkPad Edge S430, I found that it was impossible to turn on Bluetooth (see photo), and, even more frightenly, Bluetooth communication device does not appear in Device Manager any more! (I checked, I have no 'Unknown' devices either).

  I tried different drivers with no success. Bluetooth works perfectly under Windows 7, and it is always enabled by the BIOS.

  Is anyone else have had similar experiences, or ideas of what could be the problem?

  

  Hi again, emannigol

  Given that the pilots did not or could not be installed, we'll work a little more away. You said previously that the BIOS has been recognizing the Bluetooth device, correct? Recently updated BIOS? If you are unsure, you can either update it through the matrix of pilot, you went at the earliest, or just simply find your BIOS version and post it here. It could be that the BIOS does not communicate the Bluetooth device to the computer when the operating system loads. If this is the case, then Windows 8 cannot be that a Bluetooth device is installed on the machine. Check the BIOS and post your results.

  Good luck

  Adam

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Win 7 Pro. Card reader not detected. Card reader does not appear in Device Manager, or the computer.

  Windows 7 Pro.  Dell desktop computer.

  My integrated card readers (there are 4) do not work.  They do not appear in Device Manager.  They do not appear in the computer.

  In Control Panel > programs and features > I uninstalled the Realtek card reader.  Then installed latest version of the Realtek site.

  Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.

  Tried system restore, but it failed.

  What should I try?

  Thank you

  Hi Bruce,.

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.

  I appreciate your efforts to resolve the issue.

  Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/memory-card-reader-not-working-with-Windows-7-x64/6f8f5122-70dd-48D4-A083-09fdef8612e3

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Themes Aero does not

  Aero themes, transparency and other effects does not. Mr. fixit said that the graphics of the Radeon HD 6300 does not support.

  ERM... I used a card to Radeon HD 4650 graphics at one time (a few weeks ago I think?) and it fully supported the themes Aero, transparency, and all that Windows 7 Ultimate 64 - Bit had to offer.

  Are you positive that you have the correct driver installed on the site of AMD? Humor me and uninstall all the drivers AMD you currently have and then go on their official website: http://support.amd.com/en-us/download

  Once you have installed the driver appropriate and restarted; Make sure that actually choose you an Aero theme, as Windows will not automatically start displaying these effects, until you select in the settings of "customization."

  Just to access this area, right-click on your desktop and select "personalize". Once in this menu, choose one of the displayed Aero themes.

  ... If none of this solves the problem, then I am at a loss. There is no logical reason that my old card much supports more features than yours. Unless of course your GPU has went wrong, and it's a different story entirely. =/

• Wallpaper, theme & wallpaper does not

  I restarted the computer and then not show it rather wallpaper is only show solid colors showing instead the theme applied, even if I select an image and try the to put it under wall-paper it does not evolve rather gives me the error message as "internal error occurred" pls help, earlier it was working fine.

  Hello

  I suggest you try the steps listed in the link below will help us to change the background image in Windows 7.

  http://support.Microsoft.com/kb/2504610

  Hope this information is useful.

• Import of edge does not work when the downloaded

  To be able to import an edge file .oam in a document of the muse and it works fine when proofing on my desk, but when I use the Muse to download, the file does not.

  I did this several times before without incident. Not sure if it's because of the recent upgrade onboard 2015.

  Thanks for your reply. I think that the problem was a bloated library. I was reusing a folder I had created earlier and found the library full of junk that I couldn't remove. I found myself redo the work from scratch and it worked fine. I wish you could just delete stuff from the library. I saw some reviews on this before and explanations from Adobe that you should not be able to delete things because it can be shared. I'm going to talk a lot about your users work only and do not have the ability to share more that they must be able to remove.

• Animation animate edge does not start the first time I load the page. But the second time.

  Hi all

  I have problems with animation of edge on a web page. It does not load the first time the page is loaded, but charge very well the second time or at any time after that. To test I empty my cache, then reload the page. It seams to work in Internet Explorer, the first time, but not Firefox or chrome.

  I have a temporary copy of the page here... http://emiwip.com/Monique-Mathieu/landing-page-WIP.html

  Can someone tell me what is happening?

  Thank you.

  Dan

  I found the answer here... Publication is no longer works in the latest edge

  It seems that you need to load the last jQuery in the head of the pag. That suits him.

  Dan

• Must be hyperlink with the tracking code of project edge, does not

  I used the URL to test inserted on the invisible elements "hot spot" in my animated project of edge that have been opening up fine in the browser. Now I need to update these URLs with the path of the syntax, but when I change sides (replace the URL in the control panel actions of this element) and then run the animation in the browser, the link does not open.

  Any ideas or suggestions?

  Too bad, the URL itself had quotes which needed to be removed; Once this has been done the URL is opened correctly.

• Example - Mobile starters - jQuery Mobile with theme page does not not on mobile

  I created a new Web - News - Page sample - Mobile starters - Jquery Mobile page with theme and it has not changed.

  This does not work on an iPhone or Android.

  What Miss me? Y at - it a update for the jquery mobilesite work?

  This is what it looks like in dreamweaver

  http://ricston.com/push/test/screenshot_dreamweaver.PNG

  This is what it looks like on my phone:

  http://ricston.com/push/test/screenshot_galaxy.PNG

  The page for the model is here http://ricston.com/push/test/test.html - as you can see, nothing has been changed.

  You must add a window meta tag in the header of the page.

  Insert > head > Viewport.

  If you do not have this option on your version of Dreamweaver, add the following in the head of the page:

• animation of edge does not not firefox 17,18

  Hello

  When I run animation adobe like edge.

  file:///C:/documents%20and%20Settings/---/my%20Documents/L_Domain_2_e_5/L_Domain_2_e_5. HTML

  does not I got this error msg

  Error: TypeError: AdobeEdge.okToLaunchComposition is not a function

  Source file: file:///C:/Documents%20and%20Settings/---/My%20Documents/L_Domain_2_e_5/L_Domain_2_e_5 .html

  Hello again,

  I have some good news! I found a solution - at least for my problem with firefox. As I guessed and described above there was a problem with the server settings. For some reason any the guy who hosts the server thought it was a good idea to replace the MIME - / downloaded content type of all the javascript for "text/x-js. It seems that the script of edge cannot correctly interpret these files and it spits out this error message empty instead.

  An easy solution to this problem was the first to replace the MIME / content type for each script contained in the file .html with "application/javascript" or "application/x-javascript" so that it will look like this: . In addition, and this was the solution in my case, create a new file named ".htaccess" and place it in the root directory of your project dashboard. The content of this file must contain "AddType application/x - javascript.js" or "AddType application/javascript.js. Who did it for me.

  I hope it helps someone. Otherwise you can have a look at this blog post on debugging with chrome (!) (http://blogs.adobe.com/edge/2012/01/04/why-cant-it-just-work/), which also helped me to find a solution.

  Carpe diem!