Detection of ENTRY in a TextField?

Similar Questions

• How can I restrict a textfield to specific alpha characters of a single entry, but in a textfield that should have a limit of two spaces to allow a combination of two letters?

  I want to force the user to limit the entries in a textfield using only four entries unique alphabet (E, C, W or A), plus an entry of two-letter alphabet "na". I have a textfield with a limit of two characters. Right now, it is possible for the user to enter two of the same entries properly alpha. How to prevent the user to enter only a single entry, at the same time allowing the user to enter the entry "na"?

  Oh OK, I thought that was simply a consequence of you only allows one entry alphabetical, never understood you wanted as a characteristic to have AutoComplete from "n" to "na".

  You miswrite that last comment? As noted above, you stated that "I had hoped limit the entry of"na"in lowercase. Is it just for the entry? You want the output to always be capitalized?

  If this is the case you simply remove the statement on the exit event making this.rawValue.toUpperCase (trigger) each time. And seeing you want to limit the entry for "na" to a single "n", you can delete the statement in the "verification of entry" or "na".

  On change:

  If (! xfa.event.newText.match(/^(e|c|w|a|n)$/i))

  {

  XFA. Event.change = "";

  }

  To the output:

  If (this.rawValue == "n") {}

  this.rawValue.replace(/n/g,"na")

  }

  this.rawValue = this.rawValue.toUpperCase)

  Are you sure that this would be no 'wrong' user? willing the entry "na" and only able to enter "n"?

  In your code you also have double returns 'replace(/n/g,"na") '? One off the if statement and one inside? From my point of view if one is enough. As right now it will evaluate to 'naa' in the case that the user enters "na" (I tested in a fictional form).

  Maybe it's because you think you want to restrict the user to only be able to enter the "n" of single entry.

  If you feel that your question is answered please feel free to mark a correct answer so that the thread will be properly tagged as well (I guess you have all the tools you need to find the exact behavior you are looking for).

  Best regards, Mattias.

• Option to turn off the touch screen when the stylus is detected is no longer available in windows 7

  N - trig drivers with windows vista there is an option where you could choose the option to disable the pen touch when input side of the screen.  This feature is no longer available when I installed the new drivers of the n-trig in win7.

  I use my Tablet for taking notes. But with dual mode that detects an entry where I rest my Palm on the screen to write. Whenever I have to go and disable the Enter key completely before starting to write and turn once I finished it.

  I there a way to activate the automatic mode with Windows 7 n-trig drivers?

  Hello

  I also talked to N-trig's customer service and they said that the Auto mode will appear in the next version of the HP drivers. According to them, he would be released in about 2 months.

• Reference Dell system detects

  I would like to get rid of this program. Win Patrol popups all the time asking if I want to give this authorization of program start-up and Malwarebytes it signals like a PUPPY. When I go to the control panel and try to uninstall on a Windows 7 machine, I get this message that it can not be uninstalled:

  LATFORM VERSION INFORMATION
  Windows: 6.1.7601.65536 (Win32NT)
  Common Language Runtime: 4.0.30319.34209
  System.Deployment.dll: 4.0.30319.34244 built by: FX452RTMGDR
  CLR.dll: 4.0.30319.34209 built by: FX452RTMGDR
  dfdll.dll: 4.0.30319.34244 built by: FX452RTMGDR
  c:\windows\syswow64\dfshim.dll: 4.0.41209.0 (hand. 041209 - 0000)

  IDENTITIES
  Deployment identity: DellSystemDetect.application, Culture = neutral, PublicKeyToken is 0f612f649c4a10af, processorArchitecture = msil

  SUMMARY OF THE ERROR
  Here is a summary of the errors, the coordinates of these errors are later in the newspaper.
  * Error occurred during the search of store, store of components have been damaged. The following failure messages were detected:
  + Application is not installed.
  * Error occurred during uninstall of the application. The following failure messages were detected:
  + Application is not installed.
  * Exception occurred during uninstall of the application DellSystemDetect.application, Culture = neutral, PublicKeyToken is 0f612f649c4a10af, processorArchitecture = msil. The following failure messages were detected:
  + ARP entry 9204f5692a8faf3b does not exist.
  + Impossible to delete a subkey tree because the subkey does not exist.

  COMPONENT TRANSACTION FAILURE SUMMARY STORE
  No transaction error.

  CAVEATS
  There are no warnings during this operation.

  STATUS OF OPERATION
  * [13/05/2015 17:43:20]: looking for information on the component store.
  * [13/05/2015 17:43:20]: uninstall applications DellSystemDetect.application, Culture = neutral, PublicKeyToken is 0f612f649c4a10af, processorArchitecture = msil has failed.

  ERROR DETAILS
  The following errors were detected during this operation.
  * [13/05/2015 17:43:20] System.Deployment.Application.DeploymentException (SubscriptionState)
  -L'application is not installed.
  -Source: System.Deployment
  -Stack trace:
  to System.Deployment.Application.SubscriptionStore.CheckInstalledAndShellVisible (SubscriptionState subreport)
  at System.Deployment.Application.DeploymentServiceCom.MaintainSubscriptionInternal (String textualSubId)
  * [13/05/2015 17:43:20] System.Deployment.Application.DeploymentException (SubscriptionState)
  -L'application is not installed.
  -Source: System.Deployment
  -Stack trace:
  to System.Deployment.Application.SubscriptionStore.CheckInstalled (SubscriptionState subreport)
  to System.Deployment.Application.SubscriptionStore.UninstallSubscription (SubscriptionState subreport)
  at System.Deployment.Application.DeploymentServiceCom.MaintainSubscriptionInternal (String textualSubId)
  * [13/05/2015 17:43:20] System.Deployment.Application.DeploymentException (InvalidARPEntry)
  -ARP entry 9204f5692a8faf3b does not exist.
  -Source: System.Deployment
  -Stack trace:
  at System.Deployment.Application.ShellExposure.RemoveArpEntry (DefinitionIdentity subId)
  to System.Deployment.Application.ShellExposure.RemoveSubscriptionShellExposure (SubscriptionState subreport)
  at System.Deployment.Application.DeploymentServiceCom.MaintainSubscriptionInternal (String textualSubId)
  -The inner Exception-
  System.ArgumentException
  -Cannot delete a subkey tree because the subkey does not exist.
  -Source: mscorlib
  -Stack trace:
  at Microsoft.Win32.RegistryKey.DeleteSubKeyTree (String, Boolean throwOnMissingSubKey subkey)
  at System.Deployment.Application.ShellExposure.RemoveArpEntry (DefinitionIdentity subId)

  STORE THE TRANSACTION DETAILS PANE
  No transaction information is available.

  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

  I was able to remove Dell system detects my Windows laptop 8.1.

  OK-figured this out. I opened the program and had to install first before I could remove it.

• Specific characters prevent the input Textfield.

  Hello

  There is a .restrict attribute, but as the defined it prevents only other characters to enter in the textfield, restricting the TextField to the characters given.

  I want to prevent the entry of the textfield of characters 1-10 .

  The code below does not properly work.

  txt. Border = true; //

  
  

  function down(event:KeyboardEvent):void

  {

       /*

  for (var i: uint = 48; i < 58; i ++)

       {

  If (event.keyCode == I)

            {

  txt.text = txt.text.replace(/.$/,""); "

            }

       }

  */

  No. ASCII, no RegExp

  for (var i: uint = 0; i < 10; i ++)

       {

  If (txt.text.indexOf (String ((i)))

            {

  txt.text = txt.text.replace (String (i),"" ");

            }

       }

  }

  
  

  stage.addEventListener (KeyboardEvent.KEY_DOWN, down);

  It must surely be built in method.

  You can restrict the entry of specific characters using the ^ character... only one problem with your intentions... 10 isn't a character...

  TField.Restrict = "^ 0-9.

• Filling of textfield based on the input of another textfield

  Hi guys,.

  I have a problem.

  I have a textfield and the input of information in which must be completed in antother textfield. It seems easy, but the trick is. For each new entry a new textfield should appear with this information. My problem is that it creates a textfield, but for every letter I type in and not to a string when I press ENTER.

  See attached example.

  I hope you can help me!

  Thank you

  Diana

  This is the code: (I can't reach the example for some reason any) Table_SF._Repeat_SF.addInstance (1); xfa.resolveNode "(Table_SF. ("Repeat_SF [" + (Table_SF._Repeat_SF.count - 1) + ' "] '). TextField1.rawValue = xfa.event.newText;

  Instead of placing the code in the event changes, copy it to the Exit event.

  Table_SF._Repeat_SF.addInstance (1);

  xfa.resolveNode "(Table_SF. ("Repeat_SF [" + (Table_SF._Repeat_SF.count - 1) + ' "] '). TextField1.rawValue = this.rawValue;

  Thank you

  Srini

• Focusing on the entrance of type textfield

  On my stage, I have a MC with an entry of type textfield. I have an another MC on stage with control for entry as bold and italic. When my textfield has focus and I click one of the MC buttons control it loses focus. I know I can reset the home with stage.focus but wanted to know if there is a better way. As disable MC to take the focus off the text entry control. I thought that this was not the behavior. I thought that only another control of entry type can steal the focus up to now.

  A mc with a mouse event is as good as a button. If you have a way that works, use it.

• Video output no longer works on MacBook Pro

  Yesterday the two DisplayPort outputs on my end 2015 MacBook Pro has stopped working. There has been no hardware or software, change the laptop or monitor (Dell U2715). They worked fine for months and now nothing. When I plug a monitor OS X (El Cap v10.11.5) does even not noticed - not flickering, flashing, etc.. Briefly waking up the monitors, as is they detect an electrical signal, but then don't detect any entry and to go back to sleep.

  I've tried a few things...

  1. Restarted several times
  2. Restarted and reset NVRAM EXTRA
  3. Forced to OS X to create a new com.apple.windowserver. [guid] ~/Library/Preferences/ByHost .plist file.
  4. tail-ed a lot of logs in/var/log everything by performing various tasks to display (disconnect, connect, change integrated LCD settings) and nothing seems to indicate a display problem. Actually there no written newspaper at all when connecting physics poster. The ONLY newspaper that is remotely associated display comes system.log and States ' DMProxy [64795]: AMBD Services: _CFXPCCreateXPCObjectFromCFObject failed! But this error repeats frequently and goes back the most old log file of the last week, when the screens were working very well.
  5. Connected to different external displays with the Mac and also received no output and no system log.
  6. The installation worked before was all DisplayPort connections at both ends. I tried to use the mark Apple Thunderbolt-> VGA and adapters HDMI to connect to different views, air-conditioned and with no output.
  7. I have connected a lightning strike-> Gigabit adapter to the same ports, and it has been detected by the operating system.

  Edit: The HDMI output also does not work and worked last week. So apparently all output video has failed...

  Reset the management system (SCM) controller on your Mac - Apple Support

• ICS Android on Galaxy note, tap the link in a Web site, but firefox has only highlighted the link but did not open this link

  When I was with android 2.3.5 I have no problem with the Web page that has links that I touch just the link on the screen and it goes.

  However, upgraded to ics, when I tried to touch the link on the same Web page, the link highlighted in yellow, but firefox do not go to this link page.

  I tried to touch the same link to many times and suddenly firefox grabs my statement and it is up to the page of the link.

  It is very annoying that I have to repeat touch not knowing when firefox detects my entry and removal.

  Hello, if I do not use firefox mobile me and cannot give you specific advice for this problem, you can try to use the beta version of firefox mobile - it contains various performance improvements and bug fixes: https://play.google.com/store/apps/details?id=org.mozilla.firefox_beta

• Dead on Tecra S4-125 cooling fan

  The fan stopped working.
  Message: a problem with the cooling system is detected.

  It seems really dead, with another source of 5V, there will als not turn.
  I have for a new, but it will take about six weeks to arrive.
  In the meantime I put in another (not Toshiba) one, just at 5 volts with an external source.

  If the heat (and danger) are gone, but the message remains and also the speed of the computer is only about 10 percent of normal. For security reasons, I guess.

  I guess that it detects additional entries on the (4-wire) connector, which are now open to all.
  Is there a way to similate the input pins, such as the speed increases?

  In the doc that I have he's talking about a connector 3-pin, but mine is 4 pin.

  Expensive Colly you'll be lucky if anyone here will be able to offer to you answer your question.
  With other words how to use the hardware not compatible on certain hardware platform?

  I put t understand why do you think it is possible to play with this stuff and make some improvisations.
  Let's see what the experts will be posting here.

• How to upgrade the digital indicator with digital input

  Hello guys,.

  I'm trying to write code to do the following:

  The P0.0 USB-6501 connected to a switch which is held at the top via a resistor.

  The switch is pressed and I can detect the entry (my LED panel changes color).

  I need to update a digital indicator (I think it's the correct vi I use) whenever you press the switch.

  Any assistant will be much appreciated.

  
  

• User input to JSON and mathematical operation

  Hello guys,.

  Now, I am currently building another application, and I want to use JSON as my database. There will be multiple entries (entries user, INTEGER) textfield that will be stored in JSON, so I want to apply a mathematical addition on each entry which is recorded in the JSON (total value) database, and then display it in the user interface. I also want to try this with XML, but I don't know if I could do it with XML.

  The sample application in the documentation (registration with JSON data) is not enforced with user input, but we specify the data. There is also an example of a mathematical operation of database. I still don't know the concept and how to write the code.

  Any help would be appreciated. Thank you.

  Hello
  Mathematical operations can be performed in the application itself.

  (1) create input controls, a button that will trigger the operation. Click, calculate the result, update the result field, then record the entries and result in a DB, JSON or XML file.

  (2) when the page is loaded into onCreationCompleted on the Page read handler registered values (if any) and fill the control with data.

  If you need help, please post the code you have so far and that someone may be power help with specific problems.

• I can't use the same IP for three NDG ACS. !

  Hello. Install ACS 4.2 Build Patch 124 13, I created three NDG, my server has the IP 192.168.1.10, adding the same three NDG me Server gives this error:

  Overlapping IP range 192.168.1.10 conflicts were detected with entry 192.168.1.10 ACS.

  In addition, if you add a server with an IP address which does not exist and then remove it, get no option to remove.

  suggestions on this?

  Any changes in the IP address of this server. For example let's say that IP is 192.168.1.1, just what he likes change

  example 192.1.1.1 submit and restart.

  Go to control panel, administrative tools, services... restart csadmin.

  Now you should see aption to remove the aaa server.

  Kind regards

  ~ JG

• Problem with video Capture where the connection settings are unavailable

  I have two capture - Dazzle Platinum 100 and Game2 PC cards. The issue is the same with both, so it must be something to do with a setting on my laptop.  I can't access the setting of the video input in the Capture menu of one of the capture software I've tried. I can select the device in the Source menu, but nothing happens when I click on the menus of the video input (the options are missing). As such, I can't select the composite input. The audio seems ok.

  The xbox and tv are connected using a separator and the component drive with connectors yellow, red and white coming on TV and I tried the two Pal 50 and 60 in the settings menu of xbox. I have set the settings to capture PAL and have also tried all the others.

  I also disabled the webcam and uninstalled the webcam software in the case which has been cause of conflict. The dazzle card detects an entry but cela there is no picture, just a white screen with lines. The dazzle card also caused regular dumps while the Game2PC only gives the incorrect parameter error 0 x 80070057/11878 they both.

  I've now provided all that may be in conflict has been uninstalled. I tried to change the capture settings and they are not available. Device Manager checked again and it appears Windows detects the device as device not video and Audio. Why would you think?

  I solved this by downloading a new driver from the manufacturer's website. The disk driver provided seems to have been inconsistent with Windows and caused the device to be considered an audio device only. Windows drivers has also caused this problem.

• Touch and slide do not work on Windows 8.

  Original title: swype
   
  Hello
  I noticed that neithyer or touchpal swype works on my Samsung Smart PC Pro. Forums of two producers referred to in this new block of version of windows 8 support for 3rd party input methods. Is it possible to enable user-level anyway? I'd be more than happy to use them.
  Windows 7 Acer Iconia W500 had swype id it's a real shame to see that missing tabs.

  @robert aldwinckle: thanks, it runs as an administrator actually resolved the problem for TouchPal. more interesting still it detects only entry of the finger, not of stylus input. Works like a charm now.  I also did a hard reset of my tablet that has removed a lot of Samsung bloatware and maybe that helped also.

  @basith m: thanks, that's a reason which has been given by the producers of Swype. I certainly hope that they can develop their software for win 8 in the future, so I appreciate advance this feedback. the greatest compatibility always brings security risks, but these products can dramatically improve productivity, it is certainly recommended.

  BTW, I like to win 8. You must learn it and customize it to your needs, but once you do, it's perfect!

  best regards,
  Maciej