Dead on Tecra S4-125 cooling fan

Similar Questions

• Tecra A8-erratic cooling fan

  My new Tecra A8 (PTA race 83rd on Windows XP Professional) initially suffered from the cooling fan CPU refusing to close after starting upwards and go to full breath. Taking advice from this Forum, I downloaded the BIOS 4.50 and it soothed fan. Now, on battery, it remains altogether most of the time, but when I've anchor it to work on my employer's network it hums away never stops. I can put up with the background hum, but I fear that the cooling fan life will be shortened. Is there anything else I can do?

  Thank you

  Hmm sometimes the cooling module runs without any pause because of the different or bad fan that is written into the system Bios table.
  You can try to contact the service provider allowed in your country and to explain the situation with the erratic behavior of fan.

  Perhaps the good DMI string must be written to avoid such behavior strange fan.

  Good luck

• Tecra A3-145: cooling fan works very often

  Hello.
  I have a Tecra A3-145 I just bought. During regular browsing that fan comes on about every 15 seconds and remains on for about 30 seconds. Is this normal, especially for just browsing?

  Thanks for your help :)
  Dan

  Hi Dan,.

  The ventilation system on my functions very similar to the one on your Tecra SA30. Fans usually starts in a second or two of the system being initialized and will be off until I have started using the system. Navigation Internet will usually cause fans run slowly at first, but any increase in activity such as downloading, or any use of the activex will cause fans to step up in speed.

  Any use of busy graphics will cause fans to operate intensively, that will be burning CD/DVDs or video rendering.

  It doesn't seem to me as if your Tecra is bad conduct. As stated in the previous post, make sure that the appliance is well ventilated.

  Kind regards

• Re: Tecra M11 sudennly freezes and the cooling fan starts to run

  My Tecra M11 laptop is running Windows7 and with a broadband dongle Telstra wireless internet lights up and works normally for a period of time.

  Sudennly it freezes completely and 5 seconds later the cooling fan starts to run until I power off using the power button.
  Clues?
  Thank you

  You must understand that on this virtual path, it is not easy to say what the problem is here.
  I can imagine that some background process starts and increase the use of the CPU at the critical level when the motherboard sensors register at higher temperature of the processor and cooling fan starts to run fast enough.

  Try to check in the Task Manager, if something like that happen.

  I put t know how you have configured your operating system and to applications that run in the background, but also to try to stop treatments that you don't need and change some settings.

• Cooling fan runs constantly on Tecra A3

  I have a Tecra A3 one my fans constantly, past even when idleing and he did it since I got it (about 18 months ago). It works also at a steady pace, and it's like hear Arnold talk - very annoying. Sometimes a (?) of stopp making fans operate for a few seconds, then it starts again, back at the same speed. I've had the computer for repairs and they changed the fan and cleaned the cooling circuit, but this has not done things better, well, well, I got rid of the sound ratteling, but that's it!

  I've tried everything I can think of, I am currently under the computer set on the lowest setting for the speed of the processor and optimized battery cooling using the Power Saver utility, but apparently not helped at all. I also tried to set the low processor speed in BIOS setup, it makes a difference and the fan remained periods of 30 seconds (!), bur the performance of the performance of the computers was horrible with these settings, so I had to go back to the speed of the dynamics processor.

  In what concerns the the temeratures get to temperature about 36 to 37 degrees celsius (95-97 degrees Fahrenheit) for the temperature of HD (using speedfan). If theres no overheating problem (?). This leads me to believe that this could be due to a bug in the software. I currently use a Norwegian install of Windows XP with Service Pack 2, it is a customized installation provided by my University (my computer is a student PC bought through University).

  So, can someone help my makeup the tranquility of my computer like normal computers, sane?

  Thanks in advance for any help!

  Hello Stig

  I use laptop Tecra (M1) for years and I can tell you that this model is really one of the quieter laptops, I know but it is certainly not quite quiet and cooling fan runs almost constantly, but slower level. I know that this is irrelevant to your problem, but I'm just saying that most quiet laptop product noises.

  Read your ad I just say you are probably right when you say that it cannot be because of material because the temperature of the laptop is OK and there is no sign of overheating. The fact is that all new laptops are stronger than some older models and Tecra A3 is one of them and unfortunately there is not much to do. As I know nobody has mentioned on any software bug so far. Many bugs are corrected by the BIOS, updates and all I can recommend is to check if the new version of the BIOS is available and see if it helps. Before you start with the update of the BIOS read carefully Instructions how to proceed.

  Good luck!

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• Tecra S3-130: why fan still working

  Hello

  The fan is too loud on my laptop Tecra S3-130, because it doesn't always work, never stops. I tried the settings in the properties "Toshiba Power Saver", but after changing anything that the fan starts working again in a few seconds, despite the ACPI temperature is 46 degrees Celsius only, not much higher. This fan of work is always very disturbing.

  Thanks for any advice in advance.

  Kazi

  Hello

  The temperature is 46 degrees Celsius, only because the fan works properly. If the fan doesn't run the temperature climbs. I put t know how you use your device, but if you are working with programs of high performance fans should run because of high utilization of the processor and overheating problems. In addition if cooling method is set for maximum Performance the cooling fans work up.

• DV 7212nr - error cooling fan

  Hello

  the fan on my laptop HP Envy DV 7 (7212nr)-coolin is dead. Below are the details of my lapop.

  http://support.HP.com/us-en/document/c03507437

  Where can I find the best (and affordable) fan to replace it? In addition, can I just replace the fan and the heatsink not? I would have preferred to avoid using any heat is dedicated to them if possible! I'm more a DIY guy so hoping that this can be corrected my own!

  Thanks in advance!

  Your manual:

  Manual

  Here is the part fan and heatsink of heat you need:

  To be used on the computer that has an Intel processor and a graphics card models
  682061-001 discrete memory subsystem

  Fan + Heatsink

  http://www.eBay.com/ITM/HP-Pavilion-dv7-7000-DV6-7000-series-CPU-Fan-Heatsink-682061-001-/321360363899?PT=LH_DefaultDomain_0&hash=item4ad292017b

  Fan only:

  http://www.eBay.com/ITM/DFS481305MC0T-FBAV-for-HP-DV6-7000-dv6t-7000-dv7-7000-682061-001-CPU-cooling-fan-/141249159502?PT=US_CPU_Fans_Heatsinks&hash=item20e31b214e

  You don't HAVE to replace the radiator. It is a block of metal, and nothing can go wrong with it as long as air hoses are not twisted. You can replace the fan only, but it takes a little more effort. I don't think, however, that you can replace the fan without also disconnecting the heatsink heat set. And whenever you break the link between the radiator and the processor, you must clean the surfaces and reapply the thermal paste. Any competent tech would try to do this procedure without the opportunity to own thermal paste.

  If you need help with the thermal paste let us know. The key is; more thick, isn't better. In fact the thinnest of the coat you apply the better as it is a cover full of all the heart of processor. Slop not paste in the circuits of the CPU.

  Maximum PC Magazine did a study on this a few years back and found no difference between the performance of cheap white composed and stuff in precious metal expensive as long as it is applied with skill.

  If it's "the Answer" Please click "accept as a Solution.

• 2015 iMac 5K - investigation of cooling fan

  Hey guys,.

  I just got the iMac end of 2015 5K with i7 Quad-core (skylake), 4.0 GB AMD R9 M395X, 32 GB of RAM, 2 TB Fusion Drive. The cooling fan is very quiet and it's quieter in the way, but when I've rendered from Adobe After Effects or Adobe Premiere fan starts booting (and then turns off once done rendering).

  So, I wondered, - is this normal? It overheats? Contact Apple Support? This hurt the longevity of the iMac?

  Thanks for all your contributions!

  Yes this is normal. The management control of the system is the detection of additional heat to the rendering process load and lifting the fan to avoid overheating.

• The cooling fans how are 13 '' MacBook Pro 2015/16 retina?

  Hello

  Sometimes, my mac make noise with its cooling fans, I tried to use some software for the diagnosis and is surprised that a single cooling fan has been detected. Could you please clarify how cooling fans are in my mac?

  My mac is:

  MacBook Pro (retina, 13 inches, early 2015)

  2.7 GHz Intel Core i5 processor

  8 GB 1867 MHz DDR3 memory

  Graphics Intel Graphics Iris 6100 1536 MB

  Serial number C0 * VH5

  Thank you in advance,

  Maksim

  < personal information under the direction of the host >

  This model has a fan

• My HP laptop cooling fan does not work.

  Okay, so. I have a HP Pavilion 1145sg g6. It worked fine all morning, and then I put sleep temporarily (about ten to twenty minutes). When I went to turn it on, the screen was black and he said something along the lines of

  "the system has detected that a cooling fan does not work correctly. Suite operation is not recommended at this time... may result in unpredictable behavior that may result closed random, loss of data or damage the system as possible. »

  Then after a few seconds it stops completely. There is an option to continue with the summary of the system and I clicked once on it, but she didn't go through completely for allowing me to use my laptop properly (I arrived at my wallpaper and it stopped).

  This has never happened before, and I never had any problem with my laptop, like this before. I have had him since last August, and it worked pretty well through until today. Of course, the system sometimes, accused but nothing serious, for the most part just aggravating.

  How can I fix?

  Someone said here that they stung the fan with a hairpin and it started working. I took a toothpick and switched my laptop and tried to move the fan and the fan started WALLA on! I noticed that a lot of dust in there and that's probably the culprit first event hough I keep this laptop clean every day, this darn dust is sneaky and small. If you use a toothpick, make sure not to break anything especially the toothpick. last thing you want to do is cause more harm. Now that I think I don't remember when the last fan worked and if it wasn't for the message that popped up today I would not of the same notice I wasn't to hear the fan because last week I said "wow is not the substance of this portable super hot feeling", but I just thought that my fiance was simply playing games on the computer for too long and that's why he was hot. He never closes the computer off smh. in any case, I'm very happy I read this post of a person using the PIN to hair. That's what forums are all about. Help each other. I hope it works for you. Be gentle, try pushing the way fan propellers in clockwise. Use a flashlight to see if dust or anything like that is by the way to allow the fan to run its on.  I blew in the vents, but it did have almost all of the dust of the road.  All of these messages, it seems this is a common problem. Good luck

• Tecra S4-125 - no driver found

  My (old) Tecra S4-125 is controlled by Word and I forgot my password. Windows XP is installed on this laptop and I want to install Windows 7 Ultimate version. But during installation, it seems that there are no drivers available. How is this possible, because XP is already installed and how can I solve this problem.

  What drivers do I need and how to install?

  Click on the link provided by Timox.
  Here, you choose:

  -Archives
  Tecra-
  -Tecra S4 series
  -All

  Now, you can find all the drivers for this laptop series.
  As mentioned by Timox; Win 7 was not supported for this model of laptop, and so Win 7 drivers are not being you can try using the Vista drivers in many cases, these drivers must work under the Win 7 system.

  Otherwise I recommend the DFR (device) and (provider) come of our simple devices in Device Manager.
  You can then use the two IDs to find the drivers on the internet

• How to disassemble the Qosmio E10 to replace the cooling fan - need manual

  Does anyone have instructions on how to disassemble the E10 to replace the cooling fan. a G25 irisvista.com all the other models, but the design is not the same.

  Now stuck at removal of keyboard connector.
  No idea what fan model numbers so I can order before the band down.

  Hello

  Unfortunately, it seems that there is no information on fan replacing on the laptop of the G10. These documentations are not for public use, but only for the Toshiba authorized service providers :(

  Apart from this fact it s not advisable to disassemble this laptop if you have no experience! During the disassembly process, you could damage the motherboard or something else

  So I think that he of better go to a technician because he has more experience.
  In addition, the taken cooling module supported and compatible can be ordered from the Asp in your country

  have a nice we

• Satellite C650 - Question about cooling fan

  I recently bought the Toshiba Satellite C650 with processor i3 Intel and Windows 7 Home. When I see the bottom cover there are no holes for the cpu cooling fan intake air (there only the circle mark on the case under the cooling fan). Pls confirm me it is a manufacturing defect or not.

  I also ran a cpu + the base temperature software and find core temp goes up to 72 ° C in one step and I feel very hot blowing through the radiator.

  Hey Buddy,

  > When I see the bottom cover there are no holes for the cpu cooling fan intake air
  Who is normal and it s according to the laptop and the material. Different laptops have different cooling systems. This would mean that there are some laptops with no holes directly under the fan air intake. For fresh air holes are placed elsewhere to generate some air flow. If the other pieces of equipment can be cooled as well.

  There are already some threads here in the forum and as you can see it's really normal:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=227573𷣵
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=239163𺘻

  > I also ran a cpu + basic temperature software and found core temp goes up to 72 ° C in one step, and I feel very hot blowing through the radiator.
  How did you check the temperature?
  Always it is if everything works well don t care about the temperature. In this case, that the laptop could overheat, it would off himself to protect the equipment. ;)

• Error 90 b - cooling fan problem

  Hello

  A few days ago I started getting message, with a cooling fan problem, error 90 b

  But this error was only occurring when I started my laptop after 5-6 hours

  I mean when I started this morning, at the first moment it showed this error, and when it will stop automatically (it says, ENTER to continue starting or it will stop in 10 or 15 seconds) and then I start it again, but this time, no error started end

  So guyz, I wanted to know whether hardware or software problem or something else

  Still my warranty period which goes, so should I goto HP support center?

  I'm on HP Pavilion dv6

  It is material but may be repairable before you send it. Bend over a paperclip and stick it through the grid to hold the fan and prevent it from running out of control and blow compressed air in the grid to dislodge any dirt or dust that can be hung up the fan. If it does not the fan may need to be replaced.