Determinations of OPA batch processing with DB sample

Similar Questions

• Batch processing with an image overlay

  Is it possible to batch processing with an image overlay in FW CS4?

  I'm trying to resize several hundred images and place the corners rounded on them.

  If this cannot be done in FW, does anyone know of another program that could do this?

  Hi Marje,

  It is possible to include resizing and image overlay in a custom Fireworks command that can be used in batch mode.  For starters, you can check out this tutorial which deals with the first step.

  This article describes how to perform the resizing of the image and the overlay (in this case, a watermark) and then how to record the steps and turn in a custom control that can be used later in batch mode.

  Once you have registered the custom command, click on file > Batch process, follow the steps below:

  1. In the first window, select the images you want to process.
  2. On the next screen, open the drop-down menu commands , and select the custom command you created (it will probably be on the bottom of the list), and then click the Add button to include in the list of the batch process.
  3. Finally, on the next screen select the location of the processed files and possibly save the script of commands for later use.

  Good luck!

• Sequence of batch processing with JavaScript

  Hi guys,.

  I have a batch sequence that will not save the original files. I get a message "the file may be read-only or another user can open. Please save the document under a different name or in a different folder. »

  However, another sequence of batch processing that runs on the same file records very well so I know that no one else is open and it and I know that I get this folder.

  The sequence that will not save the file defines opt them open and JavaScript inside collapsing many bookmarks.

  Is there something to have JavaScript in the batch sequence that does not allow this save?

  Thank you very much

  Ken

  You might have clicked the tiny icon next to the command, an icon of the small window. This causes the JS to open console window every file is processed. Stupid, right? If this is the case, try clicking this icon again while disappears and then run the batch again.

• Batch processing with an Action

  Hi all

  I created an Action in Photoshop CS5.  I saved this action in a .atn file, then I loaded in the CORRECT for PES 10 directory.

  Once in PSE, I can go to the stock and I can see and use correctly said Action.  So I know it works.

  My question/problem: is it possible to batch processing using 'Treat multiple files' or something else using this Action?  I know there's the CS5 option is there and it is quite simple, however, I do not see this option anywhere in the PSE.

  I hope I'm missing something or there is just something I do not know.

  I appreciate any assistance.  Thanks in advance.

  You need to open the BatchWin, atn file located in (this is for win 7 and vista x 64) in cs5 (this are just actions that uses of elements to treat multiple files)

  (do not forget to put a copy of the original file somewhere in case you need it)

  C:\Program Files (x 86) \Adobe\Photoshop elements 10\Locales\en_US\Support Files

  Then add the steps in your action to the list, without any opening in the action and you will need to add the record at the end of the action (the format you want to save the files in).

  Then, save the game and put it in the folder of media files.

  added action example:

  

  example of how it looks in the elements:

  

• Easy way to batch processing with compressor projects?

  I have 6 events with 3 projects in each of them. Y at - it a faster way to send to compressor to open manually to the top of each project and selecting send to compressor?

  Thank you!

  Scot

  You don't have to open them. You can just select one from the collection smart projects and send to compressor.

• Model of batch processing is suspended when Windows is locked

  I'm running the model of batch processing with 5 Sockets.  When the Windows form is locked, the grip of the model after all the test sockets have finished the model batch step titled 'Sync with controller - AfterPostUUT. '.  This call is part of the ManagedModelSupport.dll.  I have TestStand 2012 SP1 running on Windows Server 2008 R2 SP1.

  I have attached a few screenshots.

  
  

• Batch processing dialog box USE information

  I need to customize the model of batch processing with CVI. Need to add 2 for example several channels of serial number of the batch on top, remove the status message, bottom of socket - don't show the Seraglio etc number box. It looks like the files that I need to change are batchuutdlg.c and modelpanels.uir.

  Found that the source code is under "Instruments\TestStand National 4.1\Components\Models\TestStandModels." What are the best practices to make the change to the regulations provided the code? Also what files will be needed, if all the updated code will be then be in the same directory?

  Please notify.

  It depends on what version of TestStand you have.  Back in the day (I think that pre 4.0) there to be users and the folder OR in each of the folders TestStand. You had to copy into the users folder and make changes there.

  Nowadays (certainly with 4.5, but not sure about 4.1 knowledge is true for 4.1.1), you would put any change to the public folder.  If you go to: C:\Program NIUninstaller Instruments\ you will see a link to something called the TestStand Public folder.  This file should be structured like the file.  The same and all directories.  When you change the native code copy you on public directories and this way you always have native original code if you need to go back.  In addition, it handles situations where you might not be an administrator on a computer - you cannot edit files in Program Files.

  If you look in the search directories in TestStand, you will see that it refers to the Public folder first, then the Aboriginal file.  In this way that it captures your code always updated first.  So if you were to spend the SequentialModel.seq in the public folder your way would look like this: C:\Documents and Settings\All Users\Documents\National Instruments\\Components\Models\TestStandModels\SequentialModel.seq (for XP).  But you would still have the (unchanged) SequentialModel.seq on in the Aboriginal file.  When a sequence file loads and will enter the process model, he looks first in the public record and captured this process template.

  In your case, it would be one of the files you mentioned.  Well I think that you would like to move all of the CVI code above, so it can stay with the prj.

  When you go to deploy on the first tab, there's a checkbox called: deploy files to the directory Public TestStand.  If all of your customizations will now be included in the deployment.  It will put their new in the public folder on the deployment computer and the search directories should be similar, so you would be good to go.

  Hope this helps,

• Can I use Organizer to change the size of .jpg of all photos in a folder in a batch process?

  We use wa-a-ay too much disk space for a growing collection of photography.   My daughter is a monster of a camera with four children - have to - I say more?

  
  

  In my current test file, the size of the original photos range from 2.3 MB to 4.2 MB.  I took a picture at random and printed original and then three more, saved by PSE9 as .jpg files with quality average, maximum and minimum settings on regular letter-size paper and still on paper photo 4 x 6.  It takes a magnifying glass and a kneecap calibrated to detect a difference on paper, and it is even more difficult on photo paper.  I think that I should take the pressure off the hard drive capacity of all reduce to a more reasonable size; After all, minimum quality printing takes less than 1% of the space like the print quality.

  
  

  I have the feeling that I can accomplish this in a batch process with the Organizer, but that's all I've got is the intuition - not the know-how.   I would like someone to make me scroll through the process.

  
  

  Also, I expect a lecture on why I shouldn't do this.  Go ahead; I will listen.

  
  

  Thanks, Bud
  

  
  

  Bud,

  BudV wrote:

  Also, I expect a lecture on why I shouldn't do this.  Go ahead; I will listen.

  You are the only one to judge... You won't regret it if you want to use photos with the size and the original resolution at a later date?

  Yes, you can use the organizer or the command 'treat multiple files' Editor. But first, you should think about two questions:

  -Are you ready to save full resolution and size files before the "shrinkage"? External USB drives with large capacities are available and affordable.

  -What you say, the optimum size would be for files resized to size 4 "x 6" at 300 DPI in 8 to 10 jpeg quality.

  Resizing the Editor: use the command 'treat multiple files' and click on the button "Same as source". I do it without a backup of first sound... This can be done per-folder.

  Resizing of the Organizer: use the 'Export' command This command leaves the original and puts the files in a new folder. The resulting files are NOT included in the catalogue. This means that the maintenance of your organization (albums, categories, tags,...) will be difficult. even if you use a file management system.

  Another solution with third party software such as Faststone photo resizer:

  -Absolutely do a full backup before

  -Run the resizing of the external software options so that files are resized without being moved. Replacing the originals.

  -If you use the Organizer, your organization will be preserved, but the size of the files in the catalog databases and the thumbnail will be wrong. You can recreate the thumbnail cache by deleting the thumbs.5.cache file in your catalog folder. It will be rebuilt automatically.

  That worked for me in the past... no warranty for you!

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug

• Convert Multiple TIFF files to PDF in Adobe Acrobat 9 Pro with batch processing

  Hello. I use Adobe Acrobat 9 Pro and I am trying to convert approximately 3000 TIFF files into PDF files. Is there a way to batch process all the files at once so that it can be done quickly?

  Hi Alisha Garrett,

  Please see the thread with a similar question:

  • Batch convert TIFF to PDF
  • TIFF files secret batch in batch combined in one PDF
  • TIFF files secret batch in batch combined in one PDF

  Check if that helps.

  Would also like to inform you that Adobe Acrobat 9 is an old version and does not support end of support | Reader 9 and Acrobat 9 (and previous versions)

  Kind regards

  Meenakshi

• FDQM replace it with security in batch processing does not

  Hi all
  
  I know that there is a recent post on this subject (October 2010), then of the apology for opening a new thread, but I have tried everything and cannot get this to work.
  
  We use version 11.1.2 for HFM and FDM and you want replaced by the method of security in our batch, as some data will be entered manually in HFM and we do not want this deleted when the package is run.
  
  I tested using RRS.txt, RS.txt and R3.txt as the last part of my batch file name and have inserted a code in the action script LOAD to the output of the objLoadParam.varOptMethodValue which controls the value of the load method. In any case, it returns "0" (0 - Replace). To test again, I tested with RR.txt, RM.txt and RA.txt, and in these cases the return value is '0 ', '1' and ' 2' respectively as wudl expect (although she does not mention the possibility of using the 'Fusion' in the documentation).
  
  This could be a bug in the adapter for 11.1.2?
  Someone has seen this before and have a way to fix this?
  
  We believe that we have a work around, but it is not really ideal, if it is a feature that should be there by default.
  
  Thank you very much
  Stuart

  It is currently as a product enhancement request. It will be added at a later date as a load method for batch processing, however it is not currently available.

• Need help with batch processing

  Hi forum,

  I use batch with CS5 to save JPG files in a folder of Illustrator files in another folder. I performed an action when you use save for web and devices to save a JPG file with the required options. With options that I tried in the batch window, I can't a smooth batch operation. Each transformed Illustrator file displays the dialog box "do you want to save this file" and I choose Yes or no in order for the batch to continue. My solution is to put a heavy Cup on key on my keyboard and he will choose OK when save dialog boxes under appear for each file, but I can't use other programs while the batch and once completed the destination folder is full of registered Illustrator, 2 original copies of the Illustrator files for each JPG files. This makes the very slow batch command and great pain.

  Has anyone successfully completed a batch command with SC5 on Windows to save JPG from. Files HAVE without these problems?

  No. I was reviewing just my answer and could not repost. You want to set up like this

  

  who will play without having to OK all of them. Make sure that the right folder to export to.

• Please help with the batch processing of Javascript.

  I'm looking for batch processing a large number of PDF files.  I need to reduce the font size a bit concerned of form fields on all of these PDF files.  The name of the form fields are Texte8, Texte15, Texte16 and Texte17. I could also affect the size of the font to a smaller size.  What is the script I would use on the way to this topic?

  You can use something like this in a JavaScript Execute action:

  var fieldsToChange is ['Texte15', 'Texte16', 'Texte8', 'Texte17'];.

  for (var i in fieldsToChange) {}

  var f = this.getField (fieldsToChange [i]);

  If (! f) continue;

  f.textSize = 10;

  }

  Of course, you can change the size of font you want to any other value (use 0 if you want to set as "Auto").

• Is FDMEE runing through the user interface or batch process?

  In an event of jython script, how can I determine if the FDMEE process is run through the user interface or as part of a batch?

  Use the method getBatchJobDetails (BigDecimal pLoadId) API, if it returns a result set, then there a batch process, if it is not it is not.

• Integration of the OPA 10.4 with Oracle E-business Suite

  We have a requirement for the integration of the OPA 10.4 with Oracle E - business suite.

  The condition is hypocritical:

  (1) EBS can call rules of the takeover bid on any screen - I think that this will be achieved by Oracle determinations Server (ODS) with probably a middleware between both to facilitate the exchange of webservice.

  Request- I just wanted to know if there is another way to better or if it is only best option?

  Are there examples of projects or pointers that can help us get a better understanding of the present?

  (2) given certain conditions of release in EBS, the modules of the OPA may be invoked, but this time there may be a few involved OPA interview screens.

  Request- How to proceed and achieve this goal?

  Any help on the above queries is really appreciated.

  (1) it is for an older version of OPA, but you might find something useful in this tutorial.

  (2) launch a browser window in passing a single parameter "caseid" to OPA startsession URL, so that a data adapter that you write can load and save data interviews of EBS based on the id of the object.