Determine the depth of the node

I might not be using the right search terms, but I can't find a single article anywhere to determine how deep a node exists within an XML tree.

I can't use the name of the node, because the sections may exist within the sections, as you can see (and I can't change the format of the XML document). I need to be able to get a numeric value of 0 for a node section of 'high-level' (ie: 'Home') and 1 for a section within a section node node (ie: "Subnav1"), and so on.

Thanks in advance :)

You can write a function for that. something like the following. (ok?)

Adam

Tags: Adobe Animate

Similar Questions

  • Equivalent of PowerShell for script following VBScript determine the active node of the cluster?

    Hello world

    I wonder if there is another similar Powershell script that can determine the currently active node of an MSCS?

    What follows is done on VBScript

    strClusterWMINameString = "winmgmts:\\ExchangeServerCluster01\root\cimv2"
Set objWMISvc = GetObject( strClusterWMINameString )
Set colItems = objWMISvc.ExecQuery( "Select * from Win32_ComputerSystem", , 48 )
For Each objItem in colItems
    strComputerName = objItem.Name
    WScript.Echo "The Cluster " & strClusterWMINameString & " active node is " & strComputerName
Next

    Any kind of help is appreciated.

    Thank you.

    In PowerShell, you can do this with:

    (Get-WmiObject Win32_ComputerSystem - SIEXCLU01 of the computer). Name

    Best regards, Robert

  • How to determine the amount of memory shipped on the PXI-5114

    How to determine the amount of memory onboard, I have on my PXI-5114?

    Thanks in advance.

    Hello

    I'm sorry I didn't know you already had the map.  There is a property for NO-Scope node to determine the total amount of available memory that we can then divide down to get the memory available per channel.  Please see the vi and help below:

    This gives a shot, just drop it in a VI that you use and if it should return your memory cards.  If you don't have a LabVIEW I can probably retrieve the purchased version by querying your serial number.

    Kind regards

    Kyle S

  • Threading and reuse of the node to call using reference of buffers (of the required adhesive tape)

    I tried to get the following information in the public domain for years and now that I have the answers, I'll share with those who might be interested.

    Caveat!

    Wrap your head in tape before reading just for the sake of security.

    My two questions were;

    (1) may LV re - use tampons of VI calling when you use VI serve call by reference?

    (2) is used when the use of call by reference UI thread?

    1 when you call a VI using the call through the reference node, the data in the pane of the copied or is node connector - this online as it would be with a Subvi properly implemented?

    Short answer: it's somewhere between the two.

    Long answer:

    The compiler does not know what will be called VI, but there a hint:

    the reference connected to the node of the call by reference. He uses to get the 'Prototype' for the call. Therefore, for optimal performance, use a prototype that has the same 'characteristics placeness' as it is called VI. That said, users don't know what are the "characteristics of the placeness.

    Before getting into the details, I will say that the overhead of these copies should not matter much unless it's a large data structure (a table with lots of items.) or a cluster/class with many fields or containing large networks etc..

    Example 1:

    If the prototype does not change the data, then the compiler assumes that the crux of the call by reference will not alter the data. However, at runtime, a check is made to see if the real called VI will modify the data. If Yes, then a copy is made and past so that the original data can be modified.

    Example 2:

    If the prototype contains an entry that is wired through an exit so that both input and output terminals can use the same buffer memory, but running an audit determines that the real called entry and exit VI do not share a buffer, then a copy will be made from output of the actual call to the original screws (combined input and output) buffer.

    I should also mention that, even with this behavior "are trying to get along with the prototype", it is not always possible to obtain good performance as a Subvi ordinary call. For example, if you have a situation where the prototype does not change the data and passes it through to an exit and then the compiler must assume that the data is changed (because, as in example 2, there are screws that may change even if the called real VI is not).

    And there are a few caveats:

    (1) this behavior "using a prototype" was new for 2009. Before that, we used a method more naïve data of passage that took all the entries will be changed and no outputs don't share a buffer with an entry.

    (2) this behavior can be changed in future versions, if we find additional optimizations.

    (3) this behavior is the same that we use for the dynamic distribution live (when you use the classes in LV)

    (4) If you want to create a VI can be used as a prototype, you can use the features of the Structure in Place to control the "characteristics of the placeness', namely the element nodes in and out of the border, the function"Mark as modifier"border nodes (note the pencil icon on the item), and the node always one copy.

    (5) the prototype is only the first reference ever connected to the node of the call by reference. So if you make a new prototype VI, you can just make a reference out of it plug into the crux of the call by reference. I suggest to remove the node from the call by reference and file a new.

    (6) for remote calls, we still "making copies" by transmitting data over a network.

    I hope that this helps, if you want information/clarification, so feel free to ask.

    2 - is the call made by the reference to run in the user interface thread node? If the call is made by a remote machine via ethernet, thread that host (the computer that makes the call by reference) runs on and thread that executes the target (the machine that contains the file VI) on?

    In the case of premises, the appeal made by the reference node does not require the user interface thread and may work in some thread the VI wants to run in.

    When you call a remote VI, the appeal made by the reference node uses the UI thread (detailed below) on both the client and the server.

    The client uses the UI thread to send the request to the server and there still when the response comes back. The user interface thread is not blocked during the time between the two.

    The server receives the TCP message in the UI thread, and then starts the call to the UI thread. The server also uses the user interface thread to send the response to the client. The user interface thread is not blocked on the server during execution of the VI.

    I hope that people find it when they need it!

    Ben


  • Determine the name of class LVOOP? d ' a class of child...

    Hello

    I have a number of modules (classes) that inherit from a base class called "Module".  I have all these in an array of type 'Module', I would like to save some information of each of these modules, but I need to make the distinction between each module.

    Is there a way to determine the class name of the data cable?

    Can I use the flattened string Variant, but I was wondering if it had built in property for this node/function?

    Thank you
    Jonathan

    Examples of joint:

    Malkieri,

    There is no generation in function that does exactly what you are looking for, but you can use the 'Get LV class Path' VI to return the *.lvclass of an object path given.  Using this way, you can either parse the name, or you can use Server VI to get the name of the class, as shown in the picture as an attachment.

    Chris M

  • Determine the number of channels selected for traditional DAQ

    The blocks 'DAQmx task' and "Traditional DAQ Channel" look pretty similar (see attachments). The DAQmx block ist an individual selection of channels and I am able to determine the number of selected channels.

    Now I am trying to determine the number of selected channels to a traditional DAQ, but the property DAQmx block does not work here. I already tried the trad to some form of blocks. Range of data acquisition, but failed.

    Any idea?

    In traditional DAQ, there are several ways of specifying the list of channels. Assuming that your picture shows how you use your channel list is just a string of delimited by commas. Wire a constant to a string array node worksheet and specify "comma" as the separator and the number of columns must tell you the number of channels.

    Ben

  • determine the number of monitors

    How can I determine the number of screens in Labview. In Labwindows you ATTR_NUM_MONITORS but I can't find the equivalent command in Labview.

    Remove a property node. It will already have the default Application class. Select the view > property all monitors, which is a table with details of all the monitors. You can watch its size for the number.

  • How can I determine the type of image to be used before loading an image?

    I'm developing an application using VB 2005 which measures two 8-bit or 16-bit image files. When I saw the picture, I find that I have to set the type of image the image buffer before playback of the image in it. For example, if I read a 16-bit image in a buffer of 8 bits, the image is truncated. I guess I could read the image in a 16-bit buffer and retype it if the pixel values are less than 255.

    Is there a better way to do it? Can I determine the number of bits of an image before loading in a buffer?

    Thank you!

    Hi Steverino,

    Olivia is incorrect... VDM has a function called GetFileInfo which does just what you want. It only reads the header of the image but does not load the entire image in memory. It will give you various properties such as the bit depth.

    I think that on the new .NET support, there can exist here: NationalInstruments.Vision.Analysis.Algorithms.GetFileInformation.

    Thanks to the ICB and our legacy of .NET support, it's probably a similar name.

    Eric

  • How to determine the image type in IMAQdx

    You can use the property IMAQ node to determine the image type when creating images.  However, when I try with IMAQdx I get 0 bits per pixel and I do not see a type as for IMAQ image.  I am creating 8-bit images when my camera is color.  How can I determine the image type of the camera file?

    Hi rammer,.

    IMAQdx exposes an attribute called "TypeOfImageInUse" that will give you the image type expected for the current settings of the camera. However, none of the functions that return an image IMAQdx will automatically convert the image to the format automatically, so you don't normally have to worry about this.

    I do not believe that the attribute is now directly exposed as his own property node, but you can use the CameraAttributes-> ActiveAttribute/ValueU32 those for questioning as any other attribute of dynamic camera.

    Eric

  • How to determine the DPI of the PNG image in Windows Explorer?

    In Windows XP and Vista, to determine the DPI of a PNG image, I could do a right click, go to properties, then the Summary tab, and there were entries for resolutions horizontal and vertical of the PNG as well as the width, height, and bit depth.  However, in Windows 7, when I go into the properties, I don't see their height, width, and bit depth.  For JPG, I also see the DPI, but not for the PNG.

    Is there an additional parameter, that I need to turn on?  Is there somewhere else I should be looking to find information officer CIO?  Thank you!

    Hi jzeckel,

    This function seems to be to design in Windows 7.

    If you want to have the functionality restored in Windows 7, you can leave your comments on the site Windows 7 comments .

    Hope this information helps.

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Validations not working not to when the node type is assigned

    I am facing a validation of w.r.t. strange question. I created the validations and successfully tested. For example, I created a "V1" validation that verifies the "P1" property to a value of "False" to determine whether validation is to the success or failure. If the value of the property is set to True, it should not throw any validation error.

    The property P1 is derived the value properly and validations are works fine with assign them the node type. When I assign the node type, the property P1 is derived from the 'False' value, but the node is getting added without lifting a validation error.

    Any suggestions would be helpful.

    Thank you and best regards,

    GK.

    The first check - see if validation is included in the applicable node Type/s

    Thank you

    Denzz

  • E4X: Select the nodes that match a criterion, and whose children match to another

    Hi guys,.

    I'm writing a query of E4X to select the nodes that match a criterion, and whose children match to another. My actual dataset is a little more complex than this example, but this one is easy to follow.

    Say that you are modeling a hierarchy of nodes, where each node can have zero or more parents and children. The XML file is a simple index of nodes, and each node contains their immediate parent and child relationships. In this way, you can start with a given node and build a tree in a direction any to any depth. As an extra flavor and selection criteria, each node has one or more colors that are associated with.

    Here's a sample:

    nodes <>

    < node id = ' a' >

    < name color = "red" / >

    < child id = 'b' / >

    < / node >

    < node id = "b" >

    < name color = "red" / >

    < name of color = "green" / >

    < parent = 'a' / >

    < child id = "d" / >

    < / node >

    < = 'c' node id >

    < name color = "blue" / >

    < name of color = "green" / >

    < child id = "d" / >

    < / node >

    < node id = "d" >

    < name of color = "green" / >

    < id parent = 'b' / >

    < id parent = 'c' / >

    < / node >

    ...

    < / node >

    Now, say I want to select all nodes root (those who have no parent relationships) that are red. This is the best I could come up with:

    var nodeChildren:XMLList = nodeData.node. (! hasOwnProperty ('parent'))... Color. (@name == "red");
    for each {(var childData:XML in nodeChildren)
    var childID:String = nodeData.parent () .@id;

    }

    }

    The first line gets us 90% of the way by selecting all of the nodes of color matching, but we have all these entries to get the id of the node that contains.

    It is possible to select the nodes in one of the E4X without needing the loop?

    Thank you!

    Scott

    So how about this?

    nodeData.node. (! hasOwnProperty ('parent') & color.) (@name=="red").length () > 0)

  • How can I determine the number of contacts that I have

    How can I determine the number of contacts that I currently have on my iphone

    I don't know of a way on the iPhone, but if you have a Mac, you can go to the Contacts (platform) app and scroll to the bottom where you will find the total.

    Same for iCloud.com on your browser, go to the app, scroll down.

  • Unable to determine the current location by this time El Capitan

    Hello.

    Recently, I have this problem with my Macbook pro. I turn on location services, as you can see...

    ... but my computer is unable to determine the current location in the date and time. Cards and find my mac are not also work more.

    Currently I have version 10.11.5 of El Capitan. It happened from one day to another, I don't update the software or anything like that.

    Thank you

    Edgar Lopes

    Turn on Wi - Fi for the information about the location.

  • Why the nodes are placed on web sites that I discovered with fire fox but not other browsers

    When you view the web page with fire fox is someone changing words and inserting nodes on the site. This does not happen with chrome or explorer. When I inspect the element it is HTML not allowed more written on the site. I have remove the node (a commercial that redirects the browser), but they pop up.

    You can check the suspicious extensions or recently installed unknowns.

    Make a check of malware with several malware scanning of programs on the Windows computer.
    Please scan with all programs, because each program detects a different malicious program.
    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

Maybe you are looking for