Dev Java on QNX devices?

Similar Questions

• Blocked dev Alpha B PIN device

  My Dev Alpha B has been blocked recently. I already wrote several times to:

  [email protected]

  [email protected]

  [email protected]

  [email protected]

  Especially I have not yet received response. [email protected] guys have even asked to confirm if the device is still blocked but then he stopped also reply on my email. Can someone help from Blackberry, please?

  [email protected] finally unlocked it

• Device watch Dev Alpha 10 BlackBerry device program is complete

  Had a 10.0.6 device tha wouldn't start. He connected to Desktop Manager and made a repair that left the unit installed with 10.0.4.

  Him plug in Desktop Manager to upgrade to 10.0.6. Once the upgrade is finished, the machine starts and displays the following text:

  Thank you for your participation!

  Dev BlackBerry 10 Alpha

  device program is completed.

  For more information on what to do next, please

  Visit developer.blackberry.com

  Somehow I can get out of this?

  Thank you.

  Yes, I think you can because there is a solution that works.

  For my part will ensure that the device still has a charge. Mine got in a State where it would not start so I had to fix it and then update then. The whole process has been a long time.

• Dev Alpha BBM error device

  BBM error!

  BBM has lost its connection,

  Please wait for the server

  attempt to reconnect.

  Unable to complete installation

  A problem occurred to BBM.

  Please resart your device, and then try again.

  restarted several times - no gold. Can I reload OS again?

  

  After 2 minutes the messages change:

  

  New RELOADED OS and BBM works on the device.

  In the application, it records, but the Send button invite is grayed out.

  can set state and personal message that's all.

• No Java under QNX I guess?

  Judging by the Keynote...

  No player of Java, but we are all suspected it, anyway, can't really say it's a surprise.

  Comments? Opinions?

  Waterfalls of looked cool, still no ETA.

  I created a post for better visibility, I wanted to just add that I myself (unofficial, because they are all forbidden to talk about) confirmation about this.

  See
  http://supportforums.BlackBerry.com/T5/Java-development/DevCon-update-BB-Java-is-dead-no-Java-suppor...

• Resolution - difference between Dev Alpha and released screen device

  Hi guys

  I read on one blog that the Alpha of Dev and the real device which will be released at the end of January should have different screen resolutions. (1,280 x 768, 1,280 x 720)

  You know nothing about it?

  Thank you guys. In the meantime, I got a link to blog useful Kamel Lajili (@KLajili) - http://devblog.blackberry.com/2012/08/blackberry-10-screen-resolutions/

• One or more devices do not support multi-equipment tasks.

  Hello

  I work with 2 X USB series Renault (6356 USB).  I am acquiring data analog voltage of all 8 channels on the two Renault (total up to 16 analog inputs).  I need data acquisition to synchronize and trigger from an external digital source (a signal that I currently wired in A PFI0 of Dev).  I use a sampling frequency of 800 kHz and a 400 kS buffer size.

  I tried to use an express vi for two devices; two separate express vis for each device; and recently changed to DAQmx icons (as seen in the attachment).  Anyway, I get an error (error-201426: one or more devices do not support multi-equipment tasks.).  He referred then DevA and DevB as devices that do not support tasks.  I was under the impression that tasks multi-equipment agree with property X of the series.  I use NI-DAQmx 9.5.5.

  In the attached photo, I left most while loop.  The part of the diagram that I left out is just for viewing and recording of data, I've included parts, I felt it necessary to describe my problem.

  I would appreciate all the advice really.

  Thank you

  Leslie

  I think crossrulz is right. No worries, as they must be in separate tasks, your data is always synchronized as you want. You'll just have to do some things in the software, because not all the data will be returned in the same Bay of waveforms. What you can do is to create two tasks (one for each device), build an array of tasks, and when you do a reading, do it inside a loop for. concatenate the waveforms of each reading and you have a table of waveforms with all your data as if you read it in a single task. You also need to configure your second task to trigger the DevB/PFI0 and divide your trigger wire, he PFI0 wiring on each device.

• Comments for BlackBerry - why the world do I need Java to install the Simulator

  I'm building a new developer workstation and everything moved very well except for the part, I'll install the latest Simulator, it won't install without Java.

  The funny thing is that its only necessary to decompress the vmware (!) files. Once the files are copied and VMware picks it up Java is not used.

  In my honest opinion, it's kind of weird and totally unnecessary.

  Thanks for listening. ;-) Have a great weekend.

  The BBM Server Simulator, which is installed with the 10 BlackBerry Simulator requires Java.  The device Simulator itself does not work.

  BlackBerry Momentics also makes use of Java, but it includes its own installation of Java, so you don't need to install it separately.

• Installation of the OTA for my dev builds

  Hi guys,.

  I don't know if you face this problem. I have 5/6 test approximatically to install my dev successfully create the device host via OTA. All chess show "907 invalid code file.

  Do you know why or have no work around?

  Going to submit the question to BB JIRA

• FYI: Sun, Oracle and Java... from the mouth of dogs...

  I close it immediately, because it is only meant to be informative.

  As you may or may not know, Oracle is buying Sun. It is a fait accompli. I know a lot of people in the Sun, and it seems that Oracle is very happy to be the leader in the java world, as so many database interfaces are made via java, so in the case, anyone was worrying, Java will be around for a long time to come. J2ME is the main interface of Java for mobile devices and promises to continue to evolve as such.

  Also, for those who don't know, Android is also based on J2ME and Android platform is called is no longer just a phone platform but a mobile device platform and that they plan to push for Android to reside in the PDA, mobile, netbooks and similar devices.

  For example, Blackberry will be not only by any measure, and J2ME will continue to be the most common API autour for mobile devices. Note that personally, I think that Apple has done a bad decision by adding only java not to their API. The programming interface for the IPhone remains an API of non-hack-proof based on atypical Objective C and their scripting languages... which has no other platform outside Apple who uses it.

  Hope that this info reassures everyone who was wondering about these changes at the end.

  THX

  -Donald

  Answer to close it. Only informative.

• Device ACSv4.2

  Hi - I have the following questions:

  1 - where can I find out if there are updates (patches) for the version that I use? I tried searching google and Cisco, and I'm not able to find a link.

  2. - How can I find out the version of java is the device? and this version of java can be changed?

  Thank you very much for your help!

  See you soon!

  (1) here is the link to download the patch. You must use your ID to the ORC.

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-Soleng-3DES

  (2) Java is used on the system from which you access device and device not on itself.

  Kind regards

  ~ JG

  Note the useful messages

• Compliabiality of DOT NET graphical Interfaces (GUI) with Java

  Hello
  Right now, I'm about to start the GUI in Java learning.
  I have gained all the basic knowledge of Java enough to learn GUI.
  
  My Questions are:
  (1) in a first time learning Java GUI, is it really necessary to learn AWT before learning Java Swing framework?
  
  (2) I heard that VISUAL STUDIO of Dot Net Framework supports advanced of GUI facilities and rich watch that we use to build graphic interfaces that must operate in Java Applications, so that Java Gui done, can the .net GUI library classes?
  
  Also is this really true?

  Tejaswi.B wrote:
  .. is it really necessary to learn AWT before learning Java Swing framework?

  No, but noted there are many (no) components of AWT that could be used in Swing interfaces. Fonts, sizes, layouts...

  This being said, follow the link provided Darryl and you will find the tutorial covers these classes (or almost) as if they were Swing.

  (2) I heard that VISUAL STUDIO of Dot Net Framework supports advanced GUI facilities and rich look than that of Java Gui...

  Where did you hear that?

  As far as I understand, there are a few components provided in .NET that are not in the swing, such as (I don't know how it's called) a "list of switch" where there are two lists side by side with buttons to move items from one list to the other. These components are possible from other components in the swing. I guess that Swing developers felt that these components were rarely required to justify the addition of a specific component for them.

  You can also go on SwingX (https://swingx.dev.java.net/), which is based on the swing to provide additional components.

• Raw devices not visible to the installer of the grid

  Version: 11G Rel 2
  Operating system: Solaris 5.10
  
  Number of nodes: 2
  
  We decided to use the oracle user and no network user as the owner of grid infrastructure because it is just a test installation.
  
  We have done the following on Node1

  # ln -s /dev/rdsk/c4defs0  ocr
  # ln -s /dev/rdsk/c4defs1  vote
  # ln -s /dev/rdsk/c4defs3  data1
  
  
  # chown root:oinstall /dev/rdsk/c4defs0
  # chown oracle:oinstall /dev/rdsk/c4defs1  -- But still owner remains root!
  # chown oracle:oinstall /dev/rdsk/c4defs3
  
  # chmod -R 777 /dev/rdsk/c4defs0
  # chmod -R 777 /dev/rdsk/c4defs1
  # chmod -R 777 /dev/rdsk/c4defs3
  
  
  # chmod -R 777 ocr
  # chmod -R 777 vote
  # chmod -R 777 data1

  For the storage attached to node2, we did

  # ln -s /dev/rdsk/c0defs1  data2
  # chmod -R 777 /dev/rdsk/c0defs1 -- for data files
  # chmod -R 777 data1

  During the drive for the installation of grid affecting the disc OCR and voting, part
  For

  Change Disk Discovery Path

  I entered

  /dev/rdsk/

  But it is to recognize only the voting devices and data1. OCR (/ dev/rdsk/c4defs0) cannot be seen. No idea why?
  
  Another thing, I noticed. I don't see node2 (dev/rdsk/c0defs1) disk device. Shouldn't this be included as well at this point?

  Hi Steve,.

  RAW or block devices are supported only when upgrading an existing installation using the already configured partitions. On new installations, using raw or block device partitions is not supported by Oracle Automatic Storage Management Configuration Wizard (ASMCA) or Oracle Universal Installer (YES), but is supported by the software if perform you a manual configuration.

  The above information is corret.
  In my opinion, which is always supported in case of upgrade.
  I did not write this because being support block and raw devices on this version.
  With the release of Oracle 11 g 2 (11.2) database and RAC Oracle 11g release 2 (11.2), using the database Configuration Wizard or Setup to store files directly on the block or raw devices Clusterware Oracle or Oracle database is not supported.

  >

  And by manual configuration, they hear

  # chown grid:asmadmin /dev/rdsk/cxtydzs6
  # chmod 660 /dev/rdsk/cxtydzs6
  

  Right?

  Since the oracle user is the owner of the software grid in my case it would be

  # chown oracle:oinstall /dev/rdsk/cxtydzs6
  # chmod 660 /dev/rdsk/cxtydzs6
  

  Yes...
  When the grid is that you are the owner to install Oracle Grid Infrastructure, in case a manual installation using raw for ocr and vote oinstall is the Group

  Kind regards
  Levi Pereira

• Order of Tecra S1 - WXP SP2 Driver facilities

  Ive been told that if I reinstall Windows XP Pro SP2 (without using restore disks) I need to first install the 'motherboard drivers"or any of the other modules Toshiba will install properly. Of course, during my last attempt, most of the modules would not move and displays an error that I started the installation.

  What driver package should I install everything first so the others will install correctly?

  Thank you very much!

  Hello

  I got these instructions for my S1 when I installed XP Pro. Start up and down:

  Windows XP Professional:

  Intel Chipset Software Installation UtilityV4.20.1009
  QFE Banja processor DriverQ332179
  Buffer uncontrolled in the Decom QFE file. Fun.Q329048
  Indeo Playpack patchQ327979
  Vulnerabilities in JAVA Applet Q329077 QFE
  Unchecked Buffer in HTML Help securityQ323255 QFE
  QFE for border Multi DVDQ329112
  Display Driver ATI Mobolity Radeon 9000V6.13.10.6280
  DriverSoundMax ADI Audio Digital AudioV.5.12.1.3528
  (V3528up2_signed)
  Infrared driver SMCV5.1.2462.0
  V2.01.02 BlueTooth stack
  Easy BlueTooth connect V1.0
  Ene DriverV5.1.2600.10.10 Cardbus
  MCR V1.4.5.0
  Ene Memory Card Reader DriverV5.1.2600.10.10
  MCR V1.4.5.0
  (1.2.3.0)
  Modem software driverToshiba ModemV3.1.116
  SM31116ALL2 (V.90)
  LAN DriverINTEL PRO/100V6.4
  Toshiba Wireless Lan DriverV7.62.0.390
  Driver Atheros Wireless LAN DriverV2.1.2.16
  Cisco Wireless Lan DriverV3.4.9.0
  Intel Pro/Wireless 2100 V1.0.28.2 NIC driver
  TOSHIBA Hotkey Utility V1.00.14M
  TOSHIBA Hotkey for display DevicesV1.00.06M
  Toshiba SaverV1.00.15M power
  Toshiba UtilitiesV1.00.10M
  Post Mobile Toshiba 3V1.00.12M
  Toshiba V3.01.02 Console
  Config FreeV1.01.09
  DVD-RAM driver software
  can only be used with DVD-RAM support! V3.07.0c
  Wallpapers
  ALPS Touch Pad DriverV6.0.301.8
  DualPoint activer/UtilityV1.0.0.2
  Manual Toshiba
  Acrobat Reader version 5.0
  Network in a box shortcut
  Setting DMA for optical dev.
  Parameter sec.device IDE for FastBoot
  Toshiba V1.00.1121 skins
  InterVideo WinDVD V4.0 build 11.90
  Drag ' n Drop CD - RW SoftwareV3.00.162
  Fo AC setting ensures Energy Star
  DLLCache
  Optimize startup time
  Empty the trash
  Reset the folder options
  Prepare
  Utility to change display resolution
  and
  File C:\Windows\System32\drivers\Toshiba*. MRK
  Atheros Client Utility V2.1.2.16
  Toshiba Place shortcut GER project only

  Kind regards

  Nick

• PDF Viewer

  Hi all

  I just want to create a PDF Viewer for blackberry. but I still have no idea.

  If someone has an idea or a resource, please provide me with.

  Thanks in advance

  There's already a PDF reader on the device, right?

  In any case, I guess you could try to adapt one of the open source Java PDF engines to the BlackBerry.

  Here let me google for you:

  http://www.pdfgo.com/index.html

  https://PDF-renderer.dev.Java.NET/

  http://www.jpedal.org/open_source_pdf_viewer_download.php