DevAlpha and questions CodeSigning (the same procedure as every year)

Similar Questions

• I dealt with this problem for months. Even hired a comp tech to fix it and still have the same question. There, nobody helping me?

  I dealt with this problem for months.  Even hired a comp tech to fix it and still have the same question.  I had my computer wiped and windows 7 and 8 then reinstalled by a professional.  This all started when I upgraded form 7 to 8.  After 7 to 8 my computer kept getting this error. . kept crashing.  He was supposed to be fixed and it still does the same thing. I was told then move to 8.1.  I have always the same coming error.  I'm not on computer.  IS THERE ANYONE WHO KNOWS HOW TO FIX THIS?  Someone who can explain to me step by step how to fix?  I've tried everything.  Error 0x0000005c [settings 000000000000800 0x000000000000000B x 0 0 x 0000000000000000 0 x 0000000000000000]

  Hello

  The upgrade to 8.1 was perhaps not the best thing to do...

  A lot of people are having problems with it also.

  If it is a desktop computer, have you checked the wall outlet and the plug on the back of the computer?

  Your point about starting the tone certainly as a power or a hard disk problem...

  The problem with you mouse pointer could be related to a feature called quick start...

  Your other problem also, perhaps... Try to turn it off and see if it helps...

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.

• Questions about serial port read and write at the same time

  Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

  (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

  (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

  In addition anyway is to move the cursor to the latest data from the indicator

  (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

  (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

  Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

  su_a,

  (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

  (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

  Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

  (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

  (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

  The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

  Lynn

• USBOTG and Charge at the same time on Stream 8

  To keep this thread as productive as possible and efficient for those who find it useful to:

  Unless you have under your eyes

  1. a schematic representation of the 8 Stream USB port (USB port and battery electric circuit etc.)

  2 source code for the firmware BIOS and kernel that controls the material

  Please DO NOT respond or say "is not possible".  In view of the above is true, you do not have enough information to say '' not possible. ''

  If no one replys with a solution, what he calls not possible by default.

  Also please do not answer to say ' I don't know how "or" but I know how to do anything else that ' is also not that useful.

  An update of the BIOS or other software update may be required by HP, Microsoft or both to offer this feature really intuitive and quite possible.

  And I hope that this thread can be an effort consolidated by all who have the 8 flow to make the necessary changes.  The majority of the other tablet PCs are capable of it.  It seems that only the 8 Stream and a few others have trouble with her.

  ~~~~

  I want the ability to use a simple, inexpensive cable and perhaps standard (with electronic active minimum inside) which allows me to host and to use one or more USB devices on the Stream via its USB port B microphone 8 while this cable can also be connected to a charger standard and charge 8 flow simultaneously.  This means that the cable has a minimum of three connectors.  One of the possible configurations are as follows (apart from the normal charging cable):

  1 cable Micro USB B Male - connect to the stream 8

  2 USB male A - connect to the AC charger (IE one that came with the 8 Stream)

  3. USB A female - one or several connectors to plug into the key of USB data, keyboard, mouse or even a hub.

  Connector # 2. above shall provide a power supply to recharge the 8 Stream via conn. #1 and the power supply for external USB devices via conn. #3 so that they are in use - all at the same time.

  A and if the same cable can act as a normal OTG no charger for when no external power supply is available.  This may necessitate a switch or an electrontics active inside.

  The last part of this goal is unimportant for various reasons.  I wish that HP, the manufacturer of 8 flow, to State in writing good mode necessary to do this, so that other manufacturers or even-it yourself can make maximum use of their tablet HP equipment.

  ~~~~

  The neat thing it will alow a person to do with their tablet, it is to work at home using the Tablet as a desktop PC by connecting a keyboard, mouse, perhaps external screen (with USB to the display adapter) and knit for a long time without time limit prescribed by the battery life because the charger provides energy to all involved.

  If there is only a single connector on the cable #3, then an additional node of coarse had to provide support for these multiple USB devices at the same time.  However, it would be better if there were several #3 connectors integrated in the cable itself.  This would be better as a suitable USB hub also requires its own power.  That an adapter is necessary if the whole thing were integrated into one.

  ~~~~

  I really want answers from anyone who has already accomplished USB OTG delivered with simultaneous load with flow 8. (independent of any published 'proper' way is also welcome)

  Today's date is 2015-01-16.  If in 2015-02-16 (one month), nobody has posted a solution and then starts to bug HP and Microsoft on it's us?

  ~~~~

  Technical training:

  I understand the possibility the tablet software and firmware must take a decision on the manner in which power flows on the power port USB microphone B pins.

  I know that with a proper design of the electronic circuit carring these signals of power inside the Tablet could be sensitive to what is connected and without risk to decide for himself what to do without needing to control software.  For example by testing/detecting periodically differential voltage or current management to see what sides of the connector can supply.

  But this is only one of the many "could bes".

  In addition, this can be no standard regarding the standard USB.  What seems to be actually the case with a lot of cables OTG + fresh, is that physical clues embedded in the cable or charger are used to signal to the Tablet what the situation is.  Then the signal of software/firmware of the Tablet, interprets what the situation is intelligently and responds by flipping the bits of correct hardware control to activate, or deactivate the power flow in the port and also control its direction in or out.

  I'm not familiar with the standard USB.  Maybe I could do more research, if I believed that HP followed with 8 Stream or even the standard covered this situation explicitly.

  But to a certain extent, it seems I'll have to invent something that should be intuitively just like it does with other tablets. Isn't it?  Maybe I'm overthinking, but I can't find any USB OTG + cables load that specify compatibility with 8 HP flow.

  In any case, I was familiar with both methods other use of tablets to send the highest mentioned signal to the hardware/firmware/software of the tablet to the idea that it's time to load / time of OTG or both.

  The first method is a 0 Ohm to 200 ohms short between pin USB A 2 and 3.  This is the bidirectional data differential lines D - and D + respectively.  In data mode, all the data passes back and forth on those lines.  When you load with a cable, it's the charger module that puts this short, not on the cable.  I measured the short on three different Chargers.  It is 0 Ohms on two of them, one of those who are the charger that came with the 8 HP flow.  The others 0 ohms was generic.  The third was for an apple iPad and it measured on 53KOhms.  It's probably not the resistance ohms 0-200, but probably it is impedance termination indicating that there is some intelligent serial port communication in the charger itself.  Leave it to Apple to be different.

  This method is somewhat questionable, as this signaling mode would prevent OTG + fee because it seems unlikely that you will be able to OTG when the data lines are shorted each and overloaded with such low impedance.  I could be wrong on this subject...

  The other method I have seen suggested to work with some tablets and phones other than the 8 stream is too short the USB microphone B pin 5 to Terminal 4 with 0 Ohms to 100 000 Ohms.

  USB B has 5 pins.  USB has only 4.  The extra pin on B moves the GND pin 4 pin 5 pin to and makes pin 4 PIN ID.

  If this signal applies to a drop in the ID pin (4) or in some cases, I saw that she proposed, he runs down with 0 Ohms.

  Dead shorting things always makes me nervous.  If ID is a simple normally high impedance high input, resistance could be used to make voltage well below the low or zero threshold while also preventing the risk of damage when cheat on him with a device that you do not have the diagram for.

  Yet, 100K is a bit high for a 'pull down' in most of the situations that I'm used to.  Even a 10K would be uncertain. A 1 K or 2 K seems reliable enough, but then things are weaker and in know more nowadays low...   All but a dead short but if possible.

  So, it seems possible that the device might be able to "indicate" by the specific value of the resistance, which can be found here.  In other words the resistance is not a pull down but in fact a signature analog ID, in which case the exact value will be crucial. So if this is the case, a guess is not going to work.

  Obviously in such a system as described above, a chip inside the Stream 8 should be responsible to support this information. I hope the 8 Stream has such a chip.

  Probably a register inside this chip would be at all times what the State of the pin ID is a binary number.  All that is needed is for the BIOS to the chip and the registry in it and read this number via the bus to determine what happens to the port. Finally, he would use that signals of info to send the order of material to the electrontics of power set the appropriate direction to take etc.  (and change the State of the icon on the screen of the rude)

  I don't know if the PIN ID method described is a standard USB or not either.

  Eventually, there may be a third way. But I do not suspect that it would be possible with a non-active external device. In any case too complicated for the novice DIY for sure.

  The device would need to act is a kind of extension of bus.  As an active hub.  But she would use the negotiation of data USB serial lines and in addition to reproduce one or more additional USB ports, intelligently inform the tablet to get with the program which is "now we're going to otg and recharge at the same time."

  This requires a smart external device with a processor Inside, no doubt.

  It seems to me that many other tablets have been able achieve avecjoint here the need for a smart external device and thus the flow must also be able to do.

  There is a device that claims to be able to work with the HP Jet 7 and 8 and provides same ethernet and USB and big DVI ports so loads the data stream.  But its expensive because it is active.  Se here:

  http://AMZN.com/B00OVDE0GC

  It's called a "Docking Station".

  A reference to a product that does exactly what I want (possibly without active electronic components) is here:

  http://AMZN.com/B00LTHBCNM

  It's by Kirin and it is a device of type squid with four USB ports.  Precisely, which is my goal.  But read in the comments stream 7 user indicated that he would not be OTG and load, not really clear if it worked as a hub USB OTG or not.  Another evaluator stated that she would not support even a single USB device much less fees of 8 Stream.  This device has a switch.

  I forgot to mention that some 'hackers' have claimed success with other tablets to deceive their devices by using a multi-step process to plug things in.  Usually in general they would get connected Tablet and load first, then they would return a switch or something remove some resistance or the signal was introduced by the first position of the switch. For some reason any Tablet would continue to require. Then the data lines would be free and they would plug in a usb key and it mounts correctly even if the tablet was always in charge.

  It's like the power circuit has a lock which does not allow it to return to the mode "power flow" as long as he still feels the power flows inward regardless of what software it is telling.  Full proposal here.

  These tips seem dubious to me.  Changes in the BIOS could change the way it works.  Also you can not be sure what actually happens if you do not have a schematic representation.  You could damage your tablet.  Many people will support icon in the operating system whether the Tablet is in charge.  But I'm sort of a low-risk guy and my policy is generally indicators of intereperet not to have meaning at all once a device is functioning in a non-standard setting.  Especially when it's something that I did not built and could not fix if I FRY.

  Hypothetical reasoning: tell me what data sensory discs really the State of the charging light screen?  This reflect the bit of hardware control programs actually feeding management and status on the port?  Or does it measure the direction of the flow of power, said in the section of the circuit battery monitoring?  Point - none of us have a schema because it's owner. To really be sure according to the smart electronic hardware, the port must be mode flow under advisement "of power. If it's in a "power flow out" mode and power will be delivered externally as well you wind upward with both power supplies the same power at the wheel nets.  In this case, the two opposing regulators attempting both to drive 5 V can have slightly different voltage calibrations.  That could lead to fighting between them, with more than 100% of their capacity.  For example if you try to regulate 4.95 real V and the other and other attempts to regulate 5.05 V.  Current then flows to the tune of 100 mV / a few milliohms in the cables linking the two.  This may be several amperes. (many)  In other words, like I said: you want the tablet to know that power is coming in don't go out and automatically hitting the internal switches needed for that to happen. Probably the icon should indicate this with precision, but in some wacky situation, he could not. There may be a chance that the icon could indicate the load and still be burning or focusing on some circuits of the tablet or the charger.

  Another thing, I could see that happening is if you play with these reported resistance types enough you might find a resistance value that winds up place the device in an intermittent condition.  In other words it keeps flipping back and forth quickly between OTG and fresh.  It can give the illusion that it works.  You can have marginal communication with your USB devices and battery could even load.  But will still be a lot of stress on the power circuit.

  It is difficult for me to risk a Tablet perfectly well if I don't know exactly what I'm doing.

  If a brave individual makes their own experimentation and verifies that it charges and OTGs and you tell the rest of us, you're a hero.

  Maybe one of you has a good knowledge on the USB standard to have more confidence in such an experience... like what the ID pin 4 REALLY supposed to work for example?

  That's what I know so far.  If you think you can help, thanks in advance, or if this helped you, then your quite welcome.

  It works

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us & l = to & CS = 19 & SKU = 470-abes & baynote_bnrank = 0 & baynote_irrank = 0 & ~ CK = baynoteSearch & dgc = CJ & cid = 47997 & lid = 4279734 & acd = 10550055-4485850-eb75dcb47e53437680ed323a1f4885fe

  Evidence

  http://targusblog.com/2014/11/25/how-to-turn-a-99-Tablet-into-a-workstation/

  But it's 4 x the price in Europe

  Have fun

• Satellite Pro L770 - 14 H - the use of WLan and Bluetooth at the same time

  I have a Satellite Pro L770 - 14H and you want to use a Bluetooth mouse.
  With the 'FN' and F8 key I am capable of coding between WLAN and Bluetooth, but it is not possibel to have both at the same time.

  My question is: How can I have WLAN and Bluetooth at the same time?
  To use a Bluetooth mouse with WLAN connection.

  Thank you very much
  Helmut

  Hello

  Using Win 8.1?

  Usually you could turn on and off Bluetooth in Win 8.1
  Settings PC-> PC &-> of Bluetooth devices

  There, you can move the cursor to BT for THE position.

• Lenovo L450 Dock Pro video output DVI and DP at the same time

  Hello

  I have L450 NB and Pro Dock station.

  I have question. Can I connect and use two monitors (1 - DVI, 2 - displayport)?

  In this link (https://support.lenovo.com/cz/cs/documents/pd029622) is writable:

  3 - any combination

  What it means?

  If I connect DP and DVI at the same time came out video only on DP.

  Is possible to use two screens on the digital output?

  Tomas

  maniakum wrote:
  Is possible to use two screens on the digital output?

  No, the DisplayPort and DVI Pro docking station port can be used at the same time. So, you need the Dock Ultra.

• TCP Read and Write at the same time

  Hello everyone,

  I have a question about parallelism in TCP connections.

  I know that it is possible to read and write on the same connection ID.

  So, if you ReadTCP and WriteTCP block each other, if you use the same TCP connection ID?

  Or to request more precise if I run two while loops, in parallel, with one end by calling WriteTCP and the other called ReadTCP.

  one of the delay of loops (or block) will be the other if both loops call their VI TCP at the same time right?

  The system is Windows 7 and Labview 2012.

  Kind regards

  Sebastian

  They are perfectly parallel.  Just write in one and read it from the other.  There is no conflict.

  See My TCP articles for more details.

• my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  Hello
   
  (1) what version of Windows are you using?
  (2) remember to make changes to the computer before the question?
  (3) what browser do you use for Internet Radio?
  (4) what do you exactly mean by the loss of the webradio?
  (5) on which site you want to play the radio?

  (6) using WIndows Media Player to listen to Radio Online?
   
  See also a few following articles dealing on VoIP.
  Troubleshooting VoIP
  http://TechNet.Microsoft.com/en-us/library/ff849747.aspx
  How IP phones connect to the network
  http://TechNet.Microsoft.com/en-us/library/gg425740.aspx
   
  Get back to us with more information on the issue so that we can better help you to provide the resolution.

• After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting.

  connection problems on hotmail through msn

  After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting

  Hello richardcatchpole,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• How do I get the acceleration and GPS at the same time?

  Goal: Get an acceleration and GPS at the same time

  Current situation: I can get acceleration or GPS. When I try to get the data, the code ends.

  Mini Code

  If (bps_event_get_domain (event) == sensor_get_domain()) {}
  handle_acceleration_data();
  }
  If (bps_event_get_domain (event) is {geolocation_get_domain()})

  handle_gps_data();

  }

  Question: Anyone know how to get data in an event or other methods?

  Thank you for your attention,

  Your code shows event handling, but not the request or to obtain events.  Can you show more of your code?  The following should work (note there is no error checking):

  sensor_request_events(SENSOR_TYPE_ACCELEROMETER);
  geolocation_set_period(1);
  geolocation_request_events(0);
  
  bps_event_t *event;
  while (true) {
  
      bps_get_event(&event, -1);
      if (!event) {
          continue;
      }
  
      if (bps_event_get_domain(event) == sensor_get_domain()) {
          handle_acceleration_data(event);
      } else if (bps_event_get_domain(event) == geolocation_get_domain()) {
          handle_gps_data(event);
      }
  }
  

• How to get the ASA packets that come in and out on the same interface?

  Hi all

  How can I configure the ASA5520 routes the packets that come in and out on the same interface? I ve more than 1 network behind the camera of the SAA. It s separated by internal router. They can communicate with each other.

  I've seen it's PIX design problem. She applies to the platform of the ASA?

  Please advice.

  Thank you

  Nitass

  This golden rule remains immutable. the only exception is the vpn traffic. ASA for example (or pix v7) would act as a hub for traffic between two rays rediect vpn.

  regarding your question.

  Internet <-->asa <-->1 <-->lan router <-->lan 2

  assuming the host to lan 1 to asa as the gateway default, even asa has a static route to the internal router of the point for local network 2, the golden rule will reject this operation.

  one solution is to re - configure the dhcp on the LAN 1 scope and make the internal router as the default gateway; and the internal router has the asa as the default gateway.

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• Can I fade in and out on the same track several times in After Effects?

  Hi all

  I was wondering if it is possible to fade in and out, on the same track, several times. Like, I have this audio I want to fade at the beginning-48db to + 0 dB, and at the end of the song I want it to go from + 0 dB to-48db. I don't know if it's possible, but I can't get it to work. Can I get more than two keyframes for the same way?

  Thank you for taking the time to read my question.

  Marco van Lindt

  I do not recommend the use of AE to do any sort of audio work, but yes. You can have hundreds of keyframes by track. If you set the value, we must add another keyframe. There is no that?

• Is it possible to run vCenter Server and AUVS in the same database?

  Hello. My client has vCenter Server and VUM installed and running in the same database. Yes, the same database (not only same server database) and the same ODBC (ODBC VUM is 32-bit only).

  My question is whether it is supported or not and I would like a source VMware information, not only "it works fine for me".

  I can't find any definitive info on this VMware. Only something to wave in the installation and upgrade guides about or not to run in the same database ' ' (I guess they mean 'server') and it seems that the recommendation is to separate them for the 'large environments,' whatever that means.

  The environment vSphere 4.1 is currently, and there are about 20 guests and 150 virtual machines.

  If it is not supported, I guess the best way to go is to reinstall both from scratch?

  Thanks in advance!

  / Anders

  Yes, it is a supported configuration.  Since VUM and vCenter using different tables, you can share the same DB

  The database of the update manager that you use can be identical to the vCenter Server database. You can also use a
  separate database, or you can use existing database clusters. For best results in a large scale environment, you
  must use a dedicated Update Manager database that is located on one computer other than the
  the vCenter Server system database.

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-Update-Manager-50-install-Administration-Guide.PDF