Running the Single Instance and RAC on the same server of different homes.

Similar Questions

• single instance and RAC id 452056.1

  Please confirm the notes 452056.1
  Continuity of Oracle Applications Release 12 on exit 10 gr 2 - Single Instance database and RAC [ID 452056.1]
  
  This procedure: set up data guard on ebs R12 is for
  Single-instance RAC RAC database (data Guard) not only single instance on the single database.
  
  can someone please confirm.
  Thanks in advance.

  Hello

  Haven't you designate all these documents, only to those that are applicable.

  For RAC to cloning no CARS, please see (Note: 783188,1 - certified CARS for the E-Business Suite cloning scenarios). If you don't have a CAR on the source/target nodes, you don't need this document.

  There is something more that you can refer to see (R12 Data Guard with database 11g)--(Note: 1070033.1-Business Continuity for Oracle E-Business communiqué 12 utilisant Oracle 11g Physical Standby Database) for more details.

  Thank you
  Hussein

• Clonning an ASM database on the same server with different names of sid.

  Hello people!
  
  I tried to clone an existing database on the same host with a different name with no luck.
  
  I tried what 415579,1 reccomends, but, when I reached the RESTORE CONTROLFILE from clause that it fails since this process the old and the new database must be the same. I don't want that. I want a separate copy, not a database of pending. There are other people in the company who will use this database, and I just want to replicate it.
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to modify the order db at 26/05/2009 14:51:15
  ORA-01103: the name "OLD_DB_NAME" in the control of the database file is not "NEW_DB_NAME".
  
  I want to just clone a database with a different name, in the same way we used to do with ALTER DATBASE BACKUP CONTROLFILE to TRACE-> COPY DB_FILES-> RECREATING CONTROLFILES WITH a DIFFERENT NAME DATABASE.
  
  Exp/imp it's a possible solution, but I wonder if it is just another way to clone an existing database in the same node with a different namedo with RMAN? Just as we used to with BACKUP CONTROLFILE to TRACE-> DBF_FILES-> RECREATING CONTROLFILES WITH DB NAME DIFFERENT COPY.
  
  It's the links I tried to follow without success.
  
  http://www.Oracle.com/technology/deploy/availability/PDF/asm_cloning.PDF
  Duplicate by RMAN 10 g
  
  and many others...
  
  Thanks for your help.
  Alex.

  You'll need an auxiliary copy if you restore the database to a different name.
  Take a look at the following note:
  http://jhdba.WordPress.com/2009/04/02/cloning-a-database-ASM-to-ASM/

• Installation of TEST and Dev or screw in the same server

  Hello
  
  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  
  anyone tried similar installation?
  
  Thank you

  Hi user;

  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  anyone tried similar installation?

  You can do this, I have already R11 and R12 and R12.1.1 on the same server. The main problem here is your server can handle all your instance on this subject, you may have a performance problem but thatsall.

  Either way, I suggest take oraInst.loc, oraInventory oratab file under/etc and and also create new user (applmgr-oramgr) of your new system

  Respect of
  HELIOS

• How to install the new database on the same server peoplesoft

  Hi people,
  
  I have the people tools 8.52 and financial 9.1 on my windows 2008 server where I use my database in ms SQL Server 2008 R2.we created a demo base data and configured PIA which works very well.
  
  Suppose if I want to create two databases more in the same server for different environments, which is the best way to do it?
  
  should I just create two databases in sql server and run scripts as utlspace.sql, fcddl.sql, dbowner.sql... like that then create new domain in with psadmin and areas Web servers application servers?
  
  or
  
  I should run PS_HOME\setup\PsMpDbInstall command, and then create database system etc etc?
  
  
  Please let me know for any information on this topic.

  Hello

  As Nevin said, both do the same thing, another automatic manual.

  If you choose to use PsMpDbInstall, to choose Assistant option existing Create database on the server instead of set up a server and create a database

  I prefer to run the scripts manually, that gives me more control and view the measures taken, but it is a personal choice.

  Halin

• WebDAV: use of the different logins to different WebDAV folders on the same server

  Hello

  I quite often use WebDAV to access the various folders on a server on the Internet. I do this "Add a network location" in Windows Explorer, then using the address https Server (for example https://www.myserver.com/folder1). The first time that I need to enter the credentials of the user and the corresponding password and Windows seems to store them somewhere so that I can connect to this folder also after a re-login without having to re - insert my credentials.

  The question I have, is that I also need access to different folders on the same server (for example https://www.myserver.com/folder2) that requires different user credentials and passwords. The only way I have found is to remove the first network location, disconnect and reconnect to the Windows and then add the new location of the network in Windows Explorer; Just delete the first network location and adding the second network location would not be enough that Windows had always stored the context of the 1st network location and tried to connect with the credentials of the user and the password of the 1st second.

  Question: is there a less cumbersome way to remove context from a WebDAV connection, so that I do not need to disconnect and reconnect if I need to connect to the same server with different user credentials?

  Thank you very much

  Johannes

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How can I create a cluster of two instances that are running on the same server?

  Hello
  I can't find how to create a cluster or even a rule of failover for my two instances that are running on the same server ODSEE 11 GR 1 material.
  Could you please help?
  
  Thank you

  Hello
  Clustering (intended as Sun Cluster, Veritas Cluster, etc...) IS NOT supported since 7.0:

  http://docs.Oracle.com/CD/E20295_01/PDF/821-1216.PDF [page 20]

  and, according to my own experience, is the WORST way to achieve high availability of Service LDAP directory and in a way almost CONCEDED for replication problems in your topology (lock, split, re-init, etc...).

  Please use the "application level" collection that you get out of the box with the multimaster replication.

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1217/index.html

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1220/fhkry.html#scrolltoc

  HTH,
  Marco

• You can run several APEX headphones for different instances on the same server

  Please confirm that we can run several APEX headphones for different instances on the same server?  It is a configuration of xml configuration or do we need to do more?

  
  

  Thank you

  
  

  Tony Miller

  SmartDog Services

  Austin, TX
  

  Hello

  With last listener APEX, you can configure multiple databases

  Oracle Application Express listener configuration

  Is that what you mean?

  Kind regards
  Jari

• Dev to create and test instances of the Summit on the same server and database

  I have a dev and instances of the Apex on different servers of prod. I want a test instance on the same server as the instance of dev.
  
  I use workspace import/export so all the workspaces instance have the same id of the workspace. The application ID is the same on each instance in the same workspace. This allows the pages to be exported or imported in the case of differenct.
  
  My question is (I'm sure it's obvious) I can have several instances of the Apex on the same database (dev and test) and have each the same instance ID workspace, etc..
  
  Sam

  .. often I have multiple instances of the Apex on the same database (dev and test) and I each instance have IDS of the same workspace...

  No, there can only be one Application Express instance in a database.

  Scott

• ASIC can run on the same server/db like EBS (R12.1)

  Hello

  We have an EBS (R12.1) environment and intend to use the CPSA. I've seen environments where the CAWC runs in its own environment/database, etc. and connects to an instance of the EBS. Which is the only type of available configuration or can CAWC run fully within an environment of EBS/instance on the same server? If so, what are the consequences of such a configuration, for example on the performance.

  Thank you

  NAT.

  Hi Nat,

  ASIC can be configured in two ways:

  1 centralized - where the EBS and VCP reside on the same application server.

  2 decentralized - where the EBS and CRS are on two different application servers.

  Basically the motor nucleus of CPSA of planning does all the planning in the memory of the application server (and not in the database). This planning process is highly require a lot of resources (memory) and requires a huge memory (according to the data, the type of plan and many other factors). If the application servers are not the right size, this led to the poor performance of the application. And if both the planning and EBS reside on the same server, there are possibilities that you slow the global treatment through the functions of the company. That's why decentralized architecture is preferred, where the planning process running on another remote computer of your EBS and it didn't there in not affecting transactional modules.

  Beyond that, you have the ease of maintenance in terms of correction, update, addition of multiple of VCP modules, if you're on a decentralised architecture.

  Centralized architecture is also not rare. Many companies run their planning and EBS on a single machine.

  I hope that the above gives you a point of view, using which you can choose what suits your business best!

  Kind regards

  Mohan Balaji

• Convert a single instance of Rac

  Hello experts, I have already configured a database cluster between two nodes with a RAC database named cars. I also have a database to single instance named people in the first of the nodes. Now I need to convert this single (Persons) instance in a Rac database, I want to have two database RAC (cars and the new people).
  
  Thank you much in advance.

  Oracle provides following methods to convert a single at the RAC instance database:

  Grid control
  DBCA
  Manual
  RCONFIG (from 10 g 2)

  see this link:
  http://www.Oracle.com/technology/pub/articles/chan_sing2rac_install.html (Manual Method)
  http://oracleinstance.blogspot.com/2009/12/convert-single-instance-to-RAC-instance.html (rconfig Method)
  http://onlineappsdba.com/index.php/2009/06/24/single-instance-to-RAC-conversion/ (using DBCA)
  http://oracleinstance.blogspot.com/2010/07/converting-single-instance-to-RAC.html (using DBCA)

  to convert your asm file system use RMAN:
  Reference: to convert the files no - asm asm files by following the steps as indicated in the link

  http://oracleinstance.blogspot.com/2009/12/migrate-from-database-file-system-to.html

  hope this helps you.

  Marie-Jeanne Govindarajan,
  Oracle DBA,
  http://oracleinstance.blogspot.com

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• Multiple instances of oracle with characterset different on the same server database

  Hello

  We are finalizing plans to install Automic (software scheduliong formerly UC4) for our suite of retail applications and replace Uc4.

  The process came to know that Automic does not support AL32UTF8 database characterset.

  At this moment we have RMS and UC4 UC4 supports AL32UTF8 and schema for UC4 running on the same database server is inside the RMS database.

  From now on, it is recommended to have a separate database instance on the same server as the RMS database and with a different characterset which is WE8MSWIN1252.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  The utility Automic we want to use is not compatible AL32UTF8 and manage only a database of character set WE8MSWIN1252.

  Any help and advice would be much appreciated.

  Thank you

  RAM.

  PL post OS and database versions.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  Yes - without any doubt - two databases are independent and have nothing to do with each other.

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  You may have - to test the export/import process rigorously. If your source is AL32UTF8 and target is WE8MSWIN1252, data loss may occur for those characters that are in the former, but not the last.

  HTH
  Srini

• Error running the same application

  Hello
  I was able to run the same application in another machine in another place.
  
  But when I run the app even here now, by putting the following host name instead of the IP address (I used when I ran the same application in another place) in the connection string.
  
  String url = "jdbc:oracle:thin:@ibmpc_may:1521:xe";
  
  (I have no problem to connect to this DB XE by here)
  XE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = ibmpc_may) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )
  
  But I had the problem below when you run the application itself.
  # Cannot run application app12 due to the deployment on IntegratedWebLogicServer error.
  [16: 09:42] # incomplete deployment. ####
  [16: 09:42] remote deployment failed
  [Application app12 interrupted and cancelled Server Instance IntegratedWebLogicServer]
  
  Either by the way, where is the log file? The host name that I used above may be the reason for the problem?
  
  Published by: user12233770 on May 10, 2011 16:23

  You can check with the removal of system folder?

  It will be in C:\Documents and Settings\utilisateur\Application Data\JDeveloper

• Newbie: Mobile Server and Oracle DB must be on the same server?

  Hello Forum...
  
  I have problems to install the mobile server (ver. 10.3.0.2.0).
  
  First of all, I tried to install within an instance of the OAS (ver. 10.1.3.0.0) - I could not set the password of the mobile server oc4j account in enterprise manager server application and is stuck there. Also, I couldn't connect to webtogo as mobile server administrator.
  
  Second, I have installed the version of stand-alone mobile server, but when I run the 'runmobileserver.bat' I get the following error:
  
  09/08/22 12:54:21 log9: connect as: MOBILEADMIN
  09/08/22 12:54:21 log9: Mobile Server ID not found, impossible to register.
  09/08/22 12:54:21 log9: java.sql.SQLException: ORA-00942: table or view does not exist
  
  Like the previous time, I couldn't connect to the webtogo as mobile server administrator. [OS: windows 2003 Enterprise in both cases]
  
  I was informed by my dba that Oracle mobileserver will work only if it is installed on the same server as the backend database. Is this true?
  
  Thank you
  j - p.

  Hi J - P,

  When you installed the mobile server in stand-alone mode, repwizard was not performed or has failed.
  Try to rerun repwizard with: $ORACLE_HOME/mobile/server/admin/repwizard
  You can check the log file in $ORACLE_HOME/mobile/server/repository.log to see if there is a critical error,
  the repwizard should save your mobile server, you can consult this table: mobileadmin.mobileserver_instances so you can see your host name and port.

  On the Mobile Server OAS installation, you should not need to use the oc4jadmin password as if you installed OAS 10.1.3 and run the runinstaller lite Oracle to install Oracle lite 10.3.0.2. in the same ORACLE_HOME with run of the OAS, it should automatically deployed the mobile server j2ee application in the OAS.

  Kind regards.
  Marc
  PS: To change the OC4JADMIN password you can use the note: Note.460314.1 Ext/Pub cannot establish a connection with OC4J instance mobileserver on application server