Develop settings are not saved

Similar Questions

• Since one or two weeks, the docking station settings are not saved. When I restart the computer, the dock is not finished because he was and is located at the bottom and not left

  The parameters of the dock in the system prefs not saved. When I restart the computer, the dock is always located at the same place (bottom) even if I changed before. I have mac os X 11 5 on a mac pro (mid-2010).

  In the case where all third party apps, anti virus are installed, remove them. Click go > hold down the option key and don't release > click library > Preferences find com.apple.dock.plist, com.apple.systempreferences.plist and right click on them and move to the trash.

  The apple logo reboot and empty the trash.

• Domain user is a temporary profile, the settings are not saved

  Hello

  I am trying to install a laptop W8.1 in our field, everything works fine, except that the parameters etc. in Windows, office, etc. are not registered on the domain user profile. I tried to create a local user and copy this profile... and all the other things in the book, but without success!

  Any suggestions for this?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Some Menu settings are not saved in the library

  I need help with some aspects of the recording menu in Encore CS5. At this point, I can create menus using still and Photo Shop. I set the Routing button (unchecked the selection automatically Route buttons on the properties > Standard tab). I set the Menu color scheme (by selecting the Menu by default in the drop-down color menu). As, in library, I created a new Menu Set, and I saved these new menus (as a template file and as a content auto model) it. I intend to use these menus in family films 38

  "Here's my problem: when I import these menus from the library again to the project, they appear with"Automatically of the road buttons"and with parameters ' set color:" automatic ". I have to set the button routing from scratch, and even if I change the automatic default Menu color settings, default Menu setting the value of the color is not what I put for these menus until I exported to the library.

  So far, my only solution is to create a "skeleton" with a main Menu and a submenu project and use it as a starting point to build each of the 38 films. The menus in this skeleton project - of course - keep their settings. (My problem with this method is that I already have 22 almost finished films where I just love to replace with these new menus and menus the way is not by the color of the Menu setting and re-routing every time, or begin to build the project again from scratch.)

  It could be something very simple to solve this problem - or not! . If there is, I would be very happy to hear.

  Thank you very much

  LACI

  :

  Post edited by: LaciG Sorry! I found an answer to one of my questions: I can save the color of the Menu setting to a file. However, I still don't know how to save the routing. Thanks for any help, as always...

  cannot do. look at the routing options in preferences to improve the auto routing.ve

• Switchable graphics problem - settings are not saved

  Hello

  I don't know if I posted in the right category

  I just bought Acer Aspire E1 572 g which had amd 8670 M built in. I'm having a problem with the switchable graphics when I ever I save a setting for an application he doesnot registers and changes are back to "Unassigned". I tried looking for drivers times that they are more recent or not, and they were more recent, please tell me if anyone has a solution.

  Hi Ammar,

  Thanks for the reply.

  This question needs an advanced troubleshooting and for this I suggest you to contact Acer community who are experts with advanced tools and permissions to help you with such questions.

  http://community.Acer.com/T5/discussion-forums/CT-p/boards

  Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

  Thank you.

• Flash player settings are not saved

  Hi all.

  I'm on an iMac 2 GHz Intel core Duo, 3 GB of RAM, Safari Version 4.0.5 (6531.22.7) running Flash Version 10.1.85.3.

  On opening a page with a Flash movie (for example. YouTube) I first see the placeholder film oblong, but when I press on play it disappears and I hear but no video. If I right click to display the global settings page, select the "site Web Storage Settings" tab, the cursor that will be entirely left it IE. None. I have given this to 100 KB, restart Safari and movies now play correctly. Need to restart Safari and losing sites is a real pain. It happens in Firefox 3.6.10 as well.

  Any ideas on how to get the settings to stick please.

  Chris W

  They have released a beta version for 64-bit...

  Take a look at the support page: http://kb2.adobe.com/cps/000/6b3af6c9.html

  (I had the same problem as you... but I just found this... so I'll try the beta version now!)

  Let's cross our fingers!

• When there are more than 20 bookmarks in a folder, sorting settings are not saved

  I have several folders that contain more than 20 Favorites each. If I apply a sort to one of these folders, the kind of bookmark is lost after I closed the browser. If I reduce the number of bookmarks at less than 20, or create a subfolder and move bookmarks for her, the kind of rest between sessions.

  Use this module SortPlaces

  • https://addons.Mozilla.org/firefox/addon/SortPlaces/

  Check and tell if its working.

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  Sorry Photoshop - problems resolved - I read the details - turns out you need to make changes not files opened for preferences apply to all files.

  Thank you, Al

• Emails sent via Thunderbird are not saved on the e-mail server.

  I have a critical problem with the backup of the emails I sent to Thunderbird.

  The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

  I would be grateful if someone could
  (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
  (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

  Thank you much for the help.
  L

  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

  With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

  To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

  so whenever I have to reinstall the software, I lose all my outgoing emails.

  You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
  With pop, all mail is local to your computer, including the "sent" folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

  In fact, you must back up the entire profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

  As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
  http://KB.mozillazine.org/Move_to_a_new_PC

  do I have to save the "Sent.msf" file as well?

  If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
  In any case, to save the entire profile is the recommended method.

• The changes are not saved - RV110W

  Greetings,

  I use RV110W with Firmware Version 1.2.7.1

  Under Firewall > basic settings >

  Block WAN request:

  Enable

  then try to change the selection, then > save changes (at the bottom of the page) are not saved.

  I also verify that different browsers (IE, Firefox, Chrome...), but without success

  any ideas?

  TNX

  Hello

  Thank you for your kind reply. Based on your post above, I can life your 1.1.0.9 for 1.2.1.7 update firmware.

  Please try to take backup of router and try to downgrade the firmware to 1.1.0.9 and check the status of configuration in this version. If it works fine please try to update the firmware version of the 1.1.0.9 > 1.2.0.10 > 1.2.1.4 > 1.2.1.7 and verify the configuration changed and made me know the status to go further.

  Thank you

  Ambareezh

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• Why updates are not saved?

  It is really essential for all of us who use an internet slow (3G mobile)

  If we have to reinstall Windows, after this, we again to download all updates, also as Servicepacks, 1, 2, and 3, if you use an older version of XP.

  Why do these updates are not saved in a special file for re - use?

  (I noticed the same problem in Win7, my laptop, the updates where about 1 gigabyte if I remember right and which consumes a lot of time for me and all license surf-amount for a month, I had to pay extra to be able to surf after that for more bytes-surf..)

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/the-last-update-caused-huge-problems/af0fd0d0-29a7-4c3e-b865-7ac7a7225fcf

• Windows display settings are not optimized

  I tried to fix it and he said that the display settings are not optimized that means

  Hello

  This fixit?

  Have you tried to make the resolution equal to the native resolution of your screen?

  Right-click on an empty part of your desktop, and then click Properties. Click on the settings tab, drag the slider to the right. This should give the native resolution of your monitor. If not you may need to get the latest drivers for the graphics card.

  If that makes things too small, you can try to slide to the left to get a lower resolution but I suggest using only a resolution that maintains the same ratio as the native resolution of your screen.

  Tricky