Domain user is a temporary profile, the settings are not saved

Similar Questions

• The changes are not saved - RV110W

  Greetings,

  I use RV110W with Firmware Version 1.2.7.1

  Under Firewall > basic settings >

  Block WAN request:

  Enable

  then try to change the selection, then > save changes (at the bottom of the page) are not saved.

  I also verify that different browsers (IE, Firefox, Chrome...), but without success

  any ideas?

  TNX

  Hello

  Thank you for your kind reply. Based on your post above, I can life your 1.1.0.9 for 1.2.1.7 update firmware.

  Please try to take backup of router and try to downgrade the firmware to 1.1.0.9 and check the status of configuration in this version. If it works fine please try to update the firmware version of the 1.1.0.9 > 1.2.0.10 > 1.2.1.4 > 1.2.1.7 and verify the configuration changed and made me know the status to go further.

  Thank you

  Ambareezh

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.

• Why the titles are not saved with the project? Where are they?

  CS5 PC.

  Why the titles are not saved with the project? Where are they? I can save them with the project?

  You can also configure a project basis including all titles.  When it's time to start a new project, open the template and change the name before starting to work.  In this way all the foundations are in place without having to implement the project with these basics every time.

• Since one or two weeks, the docking station settings are not saved. When I restart the computer, the dock is not finished because he was and is located at the bottom and not left

  The parameters of the dock in the system prefs not saved. When I restart the computer, the dock is always located at the same place (bottom) even if I changed before. I have mac os X 11 5 on a mac pro (mid-2010).

  In the case where all third party apps, anti virus are installed, remove them. Click go > hold down the option key and don't release > click library > Preferences find com.apple.dock.plist, com.apple.systempreferences.plist and right click on them and move to the trash.

  The apple logo reboot and empty the trash.

• Some Menu settings are not saved in the library

  I need help with some aspects of the recording menu in Encore CS5. At this point, I can create menus using still and Photo Shop. I set the Routing button (unchecked the selection automatically Route buttons on the properties > Standard tab). I set the Menu color scheme (by selecting the Menu by default in the drop-down color menu). As, in library, I created a new Menu Set, and I saved these new menus (as a template file and as a content auto model) it. I intend to use these menus in family films 38

  "Here's my problem: when I import these menus from the library again to the project, they appear with"Automatically of the road buttons"and with parameters ' set color:" automatic ". I have to set the button routing from scratch, and even if I change the automatic default Menu color settings, default Menu setting the value of the color is not what I put for these menus until I exported to the library.

  So far, my only solution is to create a "skeleton" with a main Menu and a submenu project and use it as a starting point to build each of the 38 films. The menus in this skeleton project - of course - keep their settings. (My problem with this method is that I already have 22 almost finished films where I just love to replace with these new menus and menus the way is not by the color of the Menu setting and re-routing every time, or begin to build the project again from scratch.)

  It could be something very simple to solve this problem - or not! . If there is, I would be very happy to hear.

  Thank you very much

  LACI

  :

  Post edited by: LaciG Sorry! I found an answer to one of my questions: I can save the color of the Menu setting to a file. However, I still don't know how to save the routing. Thanks for any help, as always...

  cannot do. look at the routing options in preferences to improve the auto routing.ve

• Develop settings are not saved

  Hello

  I mainly work with jpeg and psd files and trying to save all the settings and metadata automatically to be able to use other applications (e.g.Bridge). Two catalog options "Include settings in metadata in development...". "and" automatically write XMP changes "is activated.

  However, Lightroom does not save the changes I made in the develop module. All changes to metadata (dimensions, title, IPTC, etc...) are recorded and available in other applications. I use version 3.3 on 64-bit Windows. I'm not 100% sure but I remember well, I didn't have this problem with previous versions.

  Is there a solution?

  Thank you!

  It is not clear what you expected actually. Apart from Lr or Camera Raw only how an image will be made based on your changes is if they had been exported (i.e. newly fully rendered version, JPEG or PSD). Simply save the setting nothing other that incorporates a bunch of metadata.

• Flash player settings are not saved

  Hi all.

  I'm on an iMac 2 GHz Intel core Duo, 3 GB of RAM, Safari Version 4.0.5 (6531.22.7) running Flash Version 10.1.85.3.

  On opening a page with a Flash movie (for example. YouTube) I first see the placeholder film oblong, but when I press on play it disappears and I hear but no video. If I right click to display the global settings page, select the "site Web Storage Settings" tab, the cursor that will be entirely left it IE. None. I have given this to 100 KB, restart Safari and movies now play correctly. Need to restart Safari and losing sites is a real pain. It happens in Firefox 3.6.10 as well.

  Any ideas on how to get the settings to stick please.

  Chris W

  They have released a beta version for 64-bit...

  Take a look at the support page: http://kb2.adobe.com/cps/000/6b3af6c9.html

  (I had the same problem as you... but I just found this... so I'll try the beta version now!)

  Let's cross our fingers!

• When there are more than 20 bookmarks in a folder, sorting settings are not saved

  I have several folders that contain more than 20 Favorites each. If I apply a sort to one of these folders, the kind of bookmark is lost after I closed the browser. If I reduce the number of bookmarks at less than 20, or create a subfolder and move bookmarks for her, the kind of rest between sessions.

  Use this module SortPlaces

  • https://addons.Mozilla.org/firefox/addon/SortPlaces/

  Check and tell if its working.

• Switchable graphics problem - settings are not saved

  Hello

  I don't know if I posted in the right category

  I just bought Acer Aspire E1 572 g which had amd 8670 M built in. I'm having a problem with the switchable graphics when I ever I save a setting for an application he doesnot registers and changes are back to "Unassigned". I tried looking for drivers times that they are more recent or not, and they were more recent, please tell me if anyone has a solution.

  Hi Ammar,

  Thanks for the reply.

  This question needs an advanced troubleshooting and for this I suggest you to contact Acer community who are experts with advanced tools and permissions to help you with such questions.

  http://community.Acer.com/T5/discussion-forums/CT-p/boards

  Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

  Thank you.

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• Mobile data does not and the name of the Access Point settings are not available

  I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

  I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

  There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

  "Access Point name settings are not available for this user.

  Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

  Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

  This text is a bit misleading, which is something that I have forwarded internally as your comments.

  If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

  Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.

• My photos aren't going to the photo gallery. All the settings are correct. iPhone 5 s

  iPhone 5s does not load the photos to photo streams. All the settings are correct.

  It loads new photos - try to take one and see if it goes to the cloud

• I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  Try a reset...

  Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings

• How does password manager does not work even if the settings are set correctly?

  I've recently returned to version 3.6.17 4 cause version 4 was unstable. Now that I have the old version (more stable) offer not password manager record passwords more even when the settings are set correctly.
  I notice that I had viruses and rootkits deleted (maybe they did some damage) and I cleaned my system with a registry cleaner (maybe he removed some settings through it) and this has not fixed by a clean install.

  You still see the names and passwords in the Firefox password manager?

  Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).

  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck: [] "Permanent private browsing Mode.