Develop the Module SBS window is white, blue with a white cross

Similar Questions

• Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

  Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

  

  Try to edit > Preferences > Performance and uncheck "use graphics processor.

• just upgraded to Windows 10. My lightroom (point 6.1.1) no longer respond (hangs) when I pass it draws to develop the module.

  just upgraded to Windows 10. My lightroom (point 6.1.1) no longer respond (hangs) when I pass it draws to develop the module.

  (I also update to the latest version of LR)

  Reach:

  Edit > preferences > Performance

  Disable the GPU acceleration.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• How can I change the ClickLock to the borders of windows 7 default blue border?

  Original title: gray ClickLock Windows 7 box

  Hello. I had installed TuneUp months before, and I have removed from my pc. The box do you like the ClickLock is now gray. Here's a link, it looks like: http://i48.tinypic.com/2jfkcox.png. My question is how can I do it at the borders of windows 7 default blue. Thanks in advance

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that you want to change the border of ClickLock to the borders of windows default blue 7.

  You can perform the methods suggested below and check if they will help you solve the problem.

  Method 1: disable and turn on ClickLock. To do this, follow the steps in this link:

  http://Windows.Microsoft.com/is-is/Windows-XP/help/using-ClickLock

  Method 2: Check out themes. To do this, follow the steps in this link:

  Change the theme to improve performance

  http://Windows.Microsoft.com/is-is/Windows7/change-the-theme-to-improve-performance

  If the problem persists, or if you want more help answer we are happy to help you.

• Black image to develop the module during the use of acceleration GPU on Macbook Pro

  Since the update of Lightroom 6.6, I was see the "bug of the black image" to develop the module still very frequently.

  Basically, 1/3 of my photos appear black when you view in the develop module.

  If I select 'View', 'Before', the original is displayed correctly, when switching to "After" it becomes black. Even in mode split the side "Before" picture, the side is 'After' is black.

  If I play with some settings and select 'Auto' the image appears correctly again.

  If I disable GPU acceleration, then all images are displayed correctly, but I would use the GPU acceleration.

  Any ideas how to fix?

  Is there some sort of connection that I could activate that help you solve the bug?

  Lightroom version: 6.6 [1078672]

  License: Perpetual

  Operating system: Mac OS 10

  Version: 10.11 [4]

  Application architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.5 GHz

  Built-in memory: 16 384.0 MB

  Graphic processor News:

  AMD Radeon R9 M370X OpenGL engine

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 4.1 ATI - 1.42.6

  Renderer: AMD Radeon R9 M370X OpenGL engine

  LanguageVersion: 4.10

  The issue will be probably set with 6.6.1 or 6.7 - when - knows only Adobe.

  Until then your solution is to disable the GPU acceleration or roll back to 6.5.1. Are you using a 4 k or more display? If this isn't the case, I guess you don't see no gain in performance in any case, don't you?

  Here's how: How do I roll back to Lightroom 2015.1.1 or Lightroom 6.1.1? Lightroom Queen

  Just replace 6.1.1 by 6.5.1.

• I just got a chat session with unnecessary failure to load Adobe. I bought LR6 in September. He worked for a while. Now my develop the module is disabled and it says that I have to put the licensed software. I have my number series but for some reason, it

  I just got a chat session with unnecessary failure to load Adobe. I bought LR6 in September. He worked for a while. Now my develop the module is disabled and it says that I have to put the licensed software. I have my number series but for some reason any it not reactivate my software. I downloaded the software directly from Adobe. I paid for the license from Adobe. I have a serial number adobe, but nothing works.

  Hi iamangryatlightroom,

  Please refer to the related discussion and follow the steps to solve the problem.

  Reference: Lightroom 5.5 'Module Development disabled, please renew your membership'

  Let us know if that helps.

  Kind regards

  Mohit

• during the passage of the library to develop the module I get no answer

  When I switch from a library module and to develop the module I get develop does not

  If you use Lightroom CC 2015 or Lightroom 6, go to your Lightroom preferences, the performance tab and uncheck the option of GPU. See if that makes a difference.

• preset user missing to develop the module? How to fix

  preset user missing to develop the module? How to fix

  If you mean the 'presets' entire pane is missing, you can right click on one of the titles pane and select it from the list.

  If you mean that one "Preset" seems to have disappeared, you will probably need search for files ending with ".lrtemplate" using your operating system tools

  .

• I have lightroom 5 bought the downloadable version on the adobe site. months he did the demo version of cc that it has expired. now on lightroom, it says that my develop the module is disabled. Impossible to locate one I bought on the site to download aga

  I have lightroom 5 bought the downloadable version on the adobe site. months he did the demo version of cc that it has expired. now on lightroom, it says that my develop the module is disabled. Cannot locate the one that I bought on the site to download again because they changed the adobe site drastically.

  https://forums.Adobe.com/search.jspa?q=%22develop+module+is+disabled%22&place=%2Fplaces%2f 1383621 & depth = ALL

• c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  Pls teach the procedure for resolution of the problems of this error message.

  Hi mac62sg,

  Remember to make changes to the computer before this problem?

  You can follow the steps mentioned in the article below

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen to develop the module Lightroom 6.3

  I use Windows 10. I Lightrooms 6.3 installed and when I go into the mode of developing the screen turns blue with no image list.. How can I fix this?

  Hi Veronica,

  You must go to the Edit menu > Preferences in Lightroom > Performance > uncheck 'use graphics processor' and restart Lightroom, and check again.

• Blue screen to develop the module.

  When I type develop it, the intermediate zone is blue with an X in the middle.  I don't know how to remove that for my pic is full screen?  Thanks for your help.

  Hi Debbyo,

  Please go to Preferences > performance > uncheck "use graphics processor.

  Restart Lightroom and make you to Lightroom update to the latest version 2015.6.1/6.6.1.

  Concerning

  Tanuj

• Blue screen to develop the Module, LR6

  New to Lightroom.  In collaboration with 6.  I've seen this question already posted, but have not seen a final resolution to the question so thought I would throw it again.  When I she draws to develop, I see my image in the upper left corner, but where would the larger image is just a blue box.  The "fix" which was recommended is to disable the GPU under preferences, Performance.  This is not a good long-term solution.  Any other idea?

  You can try updating the graphics driver, maybe this will allow you to work with the gpu market.

  If it isn't, it's no big deal - it works that develop and unless you have 4 or 5 K monitor, it will not affect performance.

  In fact, for many users, performance will be better with the gpu is off.

• Intermittent errors to develop the Module gets worse

  I have a 32 bit Windows 7 which has been installed LR 5.7 PC, because it came out about 2 years ago.  For the last month of 2-3 errors while using the Module of development increased.  All are intermittent, but more and more frequent.  "An unknown error has occurred" - have to restart LR.  (It is a common really).  Masks for work stop black and white - have to restart LR.  Culture - gray screen and nothing is no longer the case - have to restart LR.  Performance slows down WAAAYYYY - have to restart LR.  It was only UNKNOWN ERROR occurred was the bug.  Now these other errors have popped up, and I fear that this drop in performance will just get worse if I don't find a solution.

  Any help?  Please, I beg you.

  Try to set the preferences of LR: http://www.lightroomforums.net/showthread.php?25197-Resetting-the-lightroom-preferences-fi updated the. This pixie dust magic to often fixed spray things when LR goes wonky.

  In addition, run a memory test.  LR uses a lot of memory, and it is possible that you have a block of memory that LR only more stumbles (because it can use much more memory than the typical application) defective.

• develop the module does not not in 5.7.1

  Hi, my development ambient light module has stopped working, the image displayed on the screen is an image of lower than the actual image resolution. I installed the canon eos utility on my computer but I'm not sure if the module development had stopped working before that. I am 8.1 windows program. I tried to uninstall the prgram but it makes no difference. The problem could be to do with paths between the program and the storage, so I am not in computers in simple terms would be useful.

  Thank you, Colin.

  Indeed, it seems not a problem of location of files.

  Try these 2 actions:

  (1) reset the preferences file

  -tur off Lightroom

  -go to C:\Users\\AppData\Roaming\Adobe\Lightroom\Preferences\

  -Save this file

  -Remove

  -Restart Lightroom

  (2) check the color profiles

  try to check if your monitor's color profile is sRGB or if you have an it management application. Sometimes, there are incompatibilities between versions of ICC profiles