Develop the problem not solved by upgrading to LR 5 module in LR 4

Similar Questions

• I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• I have problems with creative cloud.  5 times now, I was in the chat with Adobe and they say the problem is solved and so far it has either not been corrected or there 1 night and then I get this message again

  So to continue with my problem.  I could not open CC, or if I sound only for 1 day, then I get this problem again...

  Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged.  Please download and install a new copy of the creative from cloud

  ' http://www.Adobe.com/go/adobecreativecloudapp '.

  I was in the chat with Adobe 5 times now for hours in a row and had to re download my times apps and use my data allowance and I'm sick of it! After every time Adobe says: the problem is corrected and I will have no more problems, and that's not true.  The last time I was in the chat was last night and it reassures me, the problem has been solved once more and it worked today and tonight it's the same thing.  I am a student online and am so far behind that I have not been able to use my apps, Illustrator and Indesign as CC keeps having this problem.  I am very frustrated and I don't know what to do. If I go again being discussed, I know they will do the same thing and I am not convinced that they will never fix this problem.  They assure me this is not my computor but it is a corrupt file or something on it.  I pay a monthly subscription for the products that I can't even use

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

• Firefox always starts with three tabs - my homepage, a site of months of slate and the Huffington Post. Even uninstalling and reintalling the does not solve problem.

  Whenever Firefox is started, it opens with three tabs - my homepage, an age of months on the site of slate and the huffington post home page. EVERY TIME. I tried to uninstall and reinstall Firefox and the problem persists.

  This has happened

  Each time Firefox opened

  == May 15, 2010

  Hello Kenneth.

  See this article to see if you have these three tabs defined as your home pages: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

• auto blog software has stopped working. Windows is checking for a solution to the problem not closed Windows program and you contact if a Solution is available. __

  I can't get my autoblogging software to run on Vista. I know it works with vista, because other users have on their machines. The developer also said it works on vista very well.

  For some reason, it does not work on my machine. I installed 2 different versions of the software and both give me error in the title of this thread immediately. He doesn't have the ability to load up and fail or anything he just lift the error immediately.

  for purposes of test and restore my sanity a little I have installed this software on an old laptop running XP and a desktop running xp, after installing the software I opened the first time and on the laptop, I got this same error, however XP let him program continues to work and he opened and held its positions. The Office opened and ran without error.

  So my question is why this software is triggering this error when I open it up on top of my vista machine, and how can I work around this problem or solve the problem, so I can use my software.

  The error indicates that microsoft will let me know when a solution is available, but that never happens.

  Any light you can throw on that would be great.

  Try to run the software in Compatibility Mode: http://www.vistax64.com/tutorials/75909-compatibility-mode.html to see if that helps.

  What is the EXACT error message (Word for Word)?  What version of Vista you are using?  What is the name and version of the software (and the Web site if you have one)?

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps. Please include answers and results in your response if it does not work.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Deskjet Ink Advantage 4515 custom printed from the internet not solved not sure how maybe helped Waterboy

  I was not able to print from the Internet, but it's working now.  No idea what I did as I have tried everything.  Maybe it was a Waterboy who responded to my email.  If so thank you.

  Hi @Moonflower 

  Here's the thread where @Waterboy71 had responded to you. I am very pleased to learn that he helped to solve the problem and if you have a moment, please consider visiting the thread and clicking on the button "accept as Solution" to let him know that the problem has been resolved for you!

  Re: My new does not print Internet

  Have a great day, thanks for your visit to the community!

• Update of Windows Vista Home Premium fails to install updates KB2533523 and KB2468871 which I think that the problem is solved, how should I try to reinstall these

  In windows update, again and again, updates KB2533523 and KB2468871 could not be updated.  I "think" I can have solved the problem, but how do I try to reinstall these, now that I think that the problem is resolved.

  Do you Google? -Online http://tinyurl.com/3onrw2c

• Firefox stop loading pages; the problem is solved simply by restarting the browser

  Seemingly random situations, Mozilla Firefox 42.0 on Windows 10 stops any type of loading page. Caution endlessly, any address spinning loading icon is tapped. This problem is solved only when I restart the browser (just by closing and opening this new patches).

  Is there a reason for that to happen?

  Hello, everyone.

  I'm sorry that it took me so long to revisit this issue.

  It seems that the pain I was experiencing was caused by one of the two addons: roomy Bookmarks Toolbar and (BookmarksBar) hide (or) Show - Hide Bookmarks Toolbar (can't remember who it is because I have already deleted them).

  It seems that one of them, or a combination of these addons caused problems of the no-load. Given that I removed these addons, it disappeared completely.

  Thank you for your help.

• Thunderbird download the same message, off guard popstate.dat antivirus, renamed to old, still have the problem. Ready to upgrade to Outlook or another prog to mail.

  Read about other similar problems in the forum, tried the possible one - Disabled popstate.dat antivirus solution, renamed popstateold.dat, TB closed, reopened to he downloaded e-mails until the more recent with the problem and still trying to download it again and again. Can't download at the end, as refreshment shows always the same amount still on the server to download, even after downloading the same message several times. This has happened several times in the past months, with several duplicates, but not this loop continues. This is the second time in a week where this has happened. My first attempt to fix - I copied all the .msf files to the new location and uninstalled TB. Then reinstalled and back .msf files. He seemed to be ok for a few days, but now have the same issue. All windows updates to date, was updated to the most recent version of TB before it happens.

  Try to connect to your account via webmail and delete the problematic message.

• MuseJSAssert: Error calling the function switch: TypeError: $(...). toBrowserWidth is not a function only on Firefox Cookies are erased and problem not solved.

  Receive error message

  MuseJSAssert: Error calling the function switch: TypeError: $(...). toBrowserWidth is not a function

  only on Firefox

  for the url

  www.tx4you.com/index.html

  Please help

  

  Clear the cache of Firefox (no cookies). Preferences > advanced > cached Web Content click clean now. FWIW, loading the page just fine for me in Firefox.

• Restore the partition not used since upgrade hard drive

  Hello

  Several months ago, I replaced my 80 GB HDD with a 250 GB hard drive.  I used Apricorn upgrade kit to clone the drive, which, in hindsight, may have been a mistake.  I noticed that since installing the new drive, partition RECOVERY (D:\) does not seem to be used at all.  None of the files or directories of the partition have been affected since the day the hard drive has been installed.  Windows indicates that the restore points have been created with success since that time; I guess they are created on the primary partition (C:\).  The D: partition is 30 GB, 15 GB free.  It seems to me that with the current state of things, I have 15-30 GB of hard disk space lost for this partition.  Is it possible for me to get Windows to start correctly using this partition again?  If not, can I safely to reduce its size or eliminate it?  I guess I could store all my data and use the factory restore CD, but I want to save this as a last option resort, because it would be tedious to reinstall also all other software I have installed on this computer.  If someone could point me to a solution or even help me to understand what is happening, I would really appreciate it.

  Thank you.

  Inspiron E1505

  Windows Vista Home Premium (32 bit)

  HDD Hitachi

  
  

• Join the paths (not solved yet)

  First a nice warm greetings from a cold Germany from the North to the Illustrator friends!

  I have a problem a few months, because it comes again and again and as I couldn't find the answer in other forums, I now write it myself:

  

  I selected 2 paths here (in total, I have many more) and I would like to connect them in order to create an outline to make a clipping mask with mesh to get some sort of feeling for this helicopter 3D.

  Normally, I cut 1 line between the two and then use the function 'register' to connect the lines to the left and right, it works but takes a long time and only works for the lines without handles.

  Do you have any advice?

  THX,

  Thomas

  Hi Thomas

  Yes CS 5 will join more than only two end points, but you might find this plug in better with more options that give you more control.

  It's called CONCATENATE and it does exactly that cost like $10 USD. Very practical made especially for this purpose.

  There is a link to the site of Rick Johnson, above, but it takes link directly to concatenate plug of the AI.

  http://RJ-Graffix.com/software/plugins.html#concatenate

  It works very well and you will save a lot of time and effort.

  Rick has a few other plugins intresting, and some are free.