Device-debug output?

Hello NDK devs.

We are trying track down a bug only release device. It seems that symbols are either generated not be loaded by GDB. We use a build managed Momentics. All the parameters or manual control of GDB for this?

Thank you!

Stéphane

Ridicule me. G adding options to the compiler and the linker for the target it's done.

Tags: BlackBerry Developers

Similar Questions

  • The device debugging

    Please tell me what device Debug in cascades of bb...

    Here all the information

    https://developer.BlackBerry.com/native/documentation/Cascades/Getting_started/tools/debugging.html

    I hope that you can serve

  • make [2]: * [o.le - v7-g/applicationName] make [1]: * [debug] make: * [Device-Debug]

    Hello! Below, I'm getting errors when building. Can you please help?

    make [2]: * [o.le - v7-g/applicationName] error 1 ApplicationName C/C++ problem
    make [1]: * [debug] problem error 2 ApplicationName C/C++
    make: * [Device-Debug] problem error 2 ApplicationName C/C++

    .pro file looks like this

    APP_NAME = ApplicationName

    CONFIG += qt warn_on cascades10

    include (config. PRI)

    LIBS +=-lbbdata

    LIBS +=-lbb

    The main.cpp file content is less than

    #include "applicationui.hpp".

    #include "sqlconnect.hpp".

    #include

    #include

    #include

    #include

    using namespace bb::cascades;

    Q_DECL_EXPORT int main (int argc, char * argv)

    {

    App app (argc, argv);

    Create the Application UI, this is where the main.qml file

    is loaded and the stage of the application is set.

    ApplicationUI support;

    Enter the main application event loop.

    Return Application::exec();

    }

    the relevant line is:
    '_ZN2bb6system12SystemDialog23setDismissAutomaticallyEb' is defined in OSR /Applications/Momentics.app/target_10_2_0_1155/qnx6/armle-v7/usr/lib/libbbsystem.so.1 try so add to the linker command line

    In conclusion: Add
    -lbbsystem
    your line of += LIBS in the .pro file

  • Tried to build and run the "QXmlStreamReader" project, but the display of the device debugging errors] error 2, no rule to make target "main.cpp", need to "debug/main.o.

    I have tried to build and run the project "QXmlStreamReader" with momentics

    but display as errors

    The path location type Resource Description
    make: * [Device-Debug] problem error 2 QXSRExample C/C++
    make [2]: * no rule to make target "main.cpp", need to "debug/main.o.  Stop.    QXSRExample C/C++ problem
    make [1]: * [debug] problem error 2 QXSRExample C/C++

    My project is to

    CBC

    main.cpp

    qxsrexample.cpp

    Inc.

    qxsrexample.h

    assets

    hand. QML etc.

    Reference: http://qt-project.org/doc/qt-4.8/qxmlstreamreader.html

    And

    http://developer.Nokia.com/community/wiki/QXmlStreamReader_to_parse_XML_in_Qt

    I posted a few snippets on the forum some time ago, maybe they are useful:

    https://supportforums.BlackBerry.com/T5/native-development/how-to-parse-XML-data-coming-from-server-...

  • Generation of the device debugging error

    I build my application using defrosting-Debug will be error like

    make: * [Device-Debug] problem error APPNAME C/C++ 2
    make [1]: * [debug] error 2 problem APPNAMEC/C++
    make [2]: * [o.le-v7-g/.obj/APPNAME.gch/c++] error 1 APPNAMEC/C++ problem
    make [2]: * waiting unfinished... Problem APPNAMEC/C++

    APPNAME-> JavaScrip resources-> APPNAME (error)

    but I build by Simulator is no error...

    I solved my problem, thank you

  • Device debugging for the camera application

    Hello

    I would like to perform device debugging for my camera application.

    Problem is that my application seems to work fine on the emulator, but I do not get the desired result on the device.

    But when I try to debug the application I can't access the camera. Whenever I try to access the camera or any other multimedia file I get a warning that I need to first unplug the unit.

    Any suggestions would be very helpful.

    Thank you

    Saket

    Hi, if you want to access a file media, first of all, go to options > memory > mass storage Mode support > power off.

    and now try to debug your application.

    PD: Sorry for my English.

  • Not able to make the device debugging on Blackberry pearl 8100.

    Hello

    I'm doing device debugging for 8100 and borrowed device via USB to the PC and attach a debuuger using JDE but the device no is not displayed under Debug-> attach to-> handheld.

    Thank you

    Odile Shorff

    Hi Mark,

    Thanks for the help I guess that the drivers had been corrupted, it uninstalled the Device Manager and put it back in place worked.

    Thank you

    Anne Laure Shroff

  • Using Qt-Creator 2.6 (beta) on mac and I don't get any debug output

    Hello

    I decided to try to get Qt-creator goes on mac for my boyfriend, so it can develop its dev-alpha and playbook.

    Finely, I must see the dev-alpha, it has frozen several times and had other problems with vkb etc... very frustrating! lol well I always wish that I had a...

    in any case, here is the mistake of Qt-creator:

    Cannot show debug output. Error: Botan library exception: PK_Verifier: No working engine for RSA

    I chose the gdb to

    /Applications/bbndk/host_10_0_9_52/darwin/x86/usr/bin/ntoarm-gdb

    Everything else seems to work very well.

    Any suggestions would be greatly appreciated!

    See you soon,.

    Jon

    I learned today that this problem has been fixed in the Qt Creator 2.6 branch.

    See https://bugreports.qt-project.org/browse/QTCREATORBUG-7985 and https://codereview.qt-project.org/#change, 35987 for more details.

  • IPsec VPN Phase 2 does not. Need help with the debug output

    Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations.  I'm trying to connect a 2651XM to a Pix 501.

    Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?

    What is the bottom tell me?

    ===========================================================

    01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

    01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

    01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

    Mote 1.1.1.3)

    01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

    01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

    01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

    Mote 1.1.1.3)

    ===============================================================================

    ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
    crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
    ISAKMP (0): processing NOTIFY payload Protocol 14 2
    SPI 2224366689, message ID = 1503891776
    ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
    to return to the State is IKMP_NO_ERR_NO_TRANS
    pixfirewall #.
    pixfirewall # sh crypto is
    ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
    crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
    ISAKMP (0): processing NOTIFY payload Protocol 14 2
    SPI 2649583861, message ID = 1778335964 a.
    ISAKMP (0): removal of spi 4117818781 message ID = 400184159
    status code returned is IKMP_NO_ERR_NO_TRANSkmp its
    Total: 1
    Embryonic: 0
    Src DST in the meantime created State
    1.1.1.2 1.1.1.3 QM_IDLE 0 0
    pixfirewall #.
    ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
    crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
    ISAKMP (0): processing NOTIFY payload Protocol 14 2
    SPI 2163779852, message ID = 2746774364
    ISAKMP (0): removal of spi 212465792 message ID = 923039456
    to return to the State is IKMP_NO_ERR_NO_TRANSexi

    Closure of session

    CCC cryp #sh
    CCC #sh crypto isakmp his
    status of DST CBC State conn-id slot
    1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

    CCC #ping 192.168.1.1

    Type to abort escape sequence.
    Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
    .....
    Success rate is 0% (0/5)

    CCC #ping 192.168.1.5

    Type to abort escape sequence.
    Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
    .....
    Success rate is 0% (0/5)
    CCC #debug isakmp crypto
    Crypto ISAKMP debug is on
    CCC #debug crypto ipsec
    Crypto IPSEC debugging is on
    Crypto CCC talkative #debug
    detailed debug output debug is on
    CCC #ping 192.168.1.5

    Type to abort escape sequence.
    Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
    .....
    Success rate is 0% (0/5)
    CCC #.
    00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
    Global (R) QM_IDLE
    00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
    00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
    00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
    00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:51:24: ISAKMP: turn 1, AH_SHA
    00:51:24: ISAKMP: attributes of transformation:
    00:51:24: ISAKMP: program is 1 (Tunnel)
    00:51:24: ISAKMP: type of life in seconds
    00:51:24: ISAKMP: life of HIS (basic) of 28800
    00:51:24: ISAKMP: type of life in kilobytes
    00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:51:24: ISAKMP: authenticator is HMAC-SHA
    00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:51:24: ISAKMP: turn 1, ESP_3DES
    00:51:24: ISAKMP: attributes of transformation:
    00:51:24: ISAKMP: program is 1 (Tunnel)
    00:51:24: ISAKMP: type of life in seconds
    00:51:24: ISAKMP: life of HIS (basic) of 28800
    00:51:24: ISAKMP: type of life in kilobytes
    00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = AH, transform = ah-sha-hmac (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = ESP, transform = esp-3des (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
    00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
    00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
    Mote 1.1.1.3)
    00:51:24: ISAKMP: node set-429221146 to QM_IDLE
    00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
    SPI 2237255312, message ID =-429221146
    00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
    (R) QM_IDLE
    00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
    00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
    Ted. "
    00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
    node 1268073006: status = IKE_QM_READY
    00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
    EXCH
    00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
    00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
    with 1.1.1.3
    00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
    Global (R) QM_IDLE
    00:51:54: ISAKMP: node set-500877443 to QM_IDLE
    00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
    00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
    00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:51:54: ISAKMP: turn 1, AH_SHA
    00:51:54: ISAKMP: attributes of transformation:
    00:51:54: ISAKMP: program is 1 (Tunnel)
    00:51:54: ISAKMP: type of life in seconds
    00:51:54: ISAKMP: life of HIS (basic) of 28800
    00:51:54: ISAKMP: type of life in kilobytes
    00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:51:54: ISAKMP: authenticator is HMAC-SHA
    00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:51:54: ISAKMP: turn 1, ESP_3DES
    00:51:54: ISAKMP: attributes of transformation:
    00:51:54: ISAKMP: program is 1 (Tunnel)
    00:51:54: ISAKMP: type of life in seconds
    00:51:54: ISAKMP: life of HIS (basic) of 28800
    00:51:54: ISAKMP: type of life in kilobytes
    00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = AH, transform = ah-sha-hmac (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = ESP, transform = esp-3des (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
    00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
    00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
    Mote 1.1.1.3)
    00:51:54: ISAKMP: node set-701693099 to QM_IDLE
    00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
    SPI 2237255312, message ID =-701693099
    00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
    (R) QM_IDLE
    00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
    00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
    Ted. "
    00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
    node-500877443: State = IKE_QM_READY
    00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
    EXCH
    00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
    00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
    CCC #sh crypto isakmp his
    status of DST CBC State conn-id slot
    1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

    CCC #ping 192.168.1.5

    Type to abort escape sequence.
    Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:

    00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
    00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
    Global (R) QM_IDLE
    00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
    00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
    00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
    00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:52:50: ISAKMP: turn 1, AH_SHA
    00:52:50: ISAKMP: attributes of transformation:
    00:52:50: ISAKMP: program is 1 (Tunnel)
    00:52:50: ISAKMP: type of life in seconds
    00:52:50: ISAKMP: life of HIS (basic) of 28800
    00:52:50: ISAKMP: type of life in kilobytes
    00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:52:50: ISAKMP: authenticator is HMAC-SHA
    00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:52:50: ISAKMP: turn 1, ESP_3DES
    00:52:50: ISAKMP: attributes of transformation:
    00:52:50: ISAKMP: program is 1 (Tunnel)
    00:52:50: ISAKMP: type of life in seconds
    00:52:50: ISAKMP: life of HIS (basic) of 28800
    00:52:50: ISAKMP: type of life in kilobytes
    00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = AH, transform = ah-sha-hmac (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = ESP, transform = esp-3des (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
    00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
    00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
    Mote 1.1.1.3)
    00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
    00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
    SPI 2237255312, message ID =-1113601414
    00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
    (R) QM_IDLE
    00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
    00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
    Ted. "
    00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
    node 1186613650: status = IKE_QM_READY
    00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
    EXCH
    00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
    00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
    with 1.1.1.3.
    Success rate is 0% (0/5)
    CCC #.
    00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
    Global (R) QM_IDLE
    00:53:20: ISAKMP: node set 459446741 to QM_IDLE
    00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
    00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
    00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:53:20: ISAKMP: turn 1, AH_SHA
    00:53:20: ISAKMP: attributes of transformation:
    00:53:20: ISAKMP: program is 1 (Tunnel)
    00:53:20: ISAKMP: type of life in seconds
    00:53:20: ISAKMP: life of HIS (basic) of 28800
    00:53:20: ISAKMP: type of life in kilobytes
    00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:53:20: ISAKMP: authenticator is HMAC-SHA
    00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:53:20: ISAKMP: turn 1, ESP_3DES
    00:53:20: ISAKMP: attributes of transformation:
    00:53:20: ISAKMP: program is 1 (Tunnel)
    00:53:20: ISAKMP: type of life in seconds
    00:53:20: ISAKMP: life of HIS (basic) of 28800
    00:53:20: ISAKMP: type of life in kilobytes
    00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = AH, transform = ah-sha-hmac (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = ESP, transform = esp-3des (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
    00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
    00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
    Mote 1.1.1.3)
    00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
    00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
    SPI 2237255312, message ID =-1692074376
    00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
    (R) QM_IDLE
    00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
    00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
    Ed ".
    00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
    node 459446741: status = IKE_QM_READY
    00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
    XCH
    00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
    00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
    00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
    State of Ed down
    00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741

    ===============================================================================

    6.2 (2) version PIX

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    activate 8Ry2YjIyt7RRXU24 encrypted password

    2KFQnbNIdI.2KYOU encrypted passwd

    pixfirewall hostname

    domain ciscopix.com

    fixup protocol ftp 21

    fixup protocol http 80

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol they 389

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    fixup protocol sip 5060

    fixup protocol 2000 skinny

    names of

    permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0

    255.255.255.0

    permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1

    255.255.255.0 0.0

    pager lines 24

    interface ethernet0 10baset

    interface ethernet1 10full

    Outside 1500 MTU

    Within 1500 MTU

    1.1.1.3 outside IP address 255.255.255.0

    IP address inside 192.168.1.1 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    location of PDM 10.10.10.0 255.255.255.0 inside

    location of PDM 10.10.10.0 255.255.255.0 outside

    PDM logging 100 information

    history of PDM activate

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_outbound_nat0_acl

    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

    Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1

    Timeout xlate 0:05:00

    Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR

    p 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    RADIUS Protocol RADIUS AAA server

    AAA-server local LOCAL Protocol

    Enable http server

    http 192.168.1.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Permitted connection ipsec sysopt

    No sysopt route dnat

    Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

    outside_map 20 ipsec-isakmp crypto map

    card crypto outside_map 20 match address outside_cryptomap_20

    card crypto outside_map 20 peers set 1.1.1.2

    card crypto outside_map 20 game of transformation-Petaluma_VPN

    outside_map interface card crypto outside

    ISAKMP allows outside

    ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m

    Ode

    part of pre authentication ISAKMP policy 20

    ISAKMP policy 20 3des encryption

    ISAKMP policy 20 md5 hash

    20 2 ISAKMP policy group

    ISAKMP duration strategy of life 20 86400

    Telnet timeout 5

    SSH timeout 5

    dhcpd address 192.168.1.5 - 192.168.1.33 inside

    dhcpd lease 3600

    dhcpd ping_timeout 750

    dhcpd outside auto_config

    dhcpd allow inside

    Terminal width 80

    Cryptochecksum:8c0d4948407071d3515f1546cf8bc147

    : end

    pixfirewall #.

    =========================================================================

    CCC #sh run
    Building configuration...

    Current configuration: 1328 bytes
    !
    version 12.4
    horodateurs service debug uptime
    Log service timestamps uptime
    no password encryption service
    !
    CCC host name
    !
    boot-start-marker
    start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
    boot-end-marker
    !
    !
    No aaa new-model
    no location network-clock-participate 1
    No network-clock-participate wic 0
    IP cef
    !
    !
    !
    !

    !

    !

    !

    crypto ISAKMP policy 2

    BA 3des

    md5 hash

    preshared authentication

    Group 2

    address key crypto isakmp 1.1.1.3 cisco123

    !

    !

    Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

    !

    map Petaluma_1 1 ipsec-isakmp crypto

    defined peer 1.1.1.3

    game of transformation-Petaluma_VPN

    match address 100

    !

    !

    !

    !

    interface FastEthernet0/0

    1.1.1.2 IP 255.255.255.0

    automatic speed

    Half duplex

    !

    interface Serial0/0

    no ip address

    Shutdown

    clock speed of 56000

    !

    interface FastEthernet0/1

    10.10.10.2 IP address 255.255.255.0

    automatic duplex

    automatic speed

    card crypto Petaluma_1

    !

    IP forward-Protocol ND

    IP route 192.168.1.0 255.255.255.0 1.1.1.3

    !

    !

    no ip address of the http server

    no ip http secure server

    !

    access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

    control plan
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    Line con 0
    line to 0
    line vty 0 4
    opening of session
    !
    !
    end

    CCC #.

    !
    !
    !
    crypto ISAKMP policy 2
    BA 3des
    md5 hash
    preshared authentication
    Group 2
    address key crypto isakmp 1.1.1.3 cisco123
    !
    !
    Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
    !
    map Petaluma_1 1 ipsec-isakmp crypto
    defined peer 1.1.1.3
    game of transformation-Petaluma_VPN
    match address 100
    !
    !
    !
    !
    interface FastEthernet0/0

    1.1.1.2 IP 255.255.255.0
    automatic speed
    Half duplex
    !
    interface Serial0/0
    no ip address
    Shutdown
    clock speed of 56000
    !
    interface FastEthernet0/1
    10.10.10.2 IP address 255.255.255.0
    automatic duplex
    automatic speed
    card crypto Petaluma_1
    !
    IP forward-Protocol ND
    IP route 192.168.1.0 255.255.255.0 1.1.1.3
    !
    !
    no ip address of the http server
    no ip http secure server
    !
    access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

    Hi David,

    Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.

    interface FastEthernet0/0

    1.1.1.2 IP 255.255.255.0

    automatic speed

    Half duplex

    !

    interface FastEthernet0/1

    10.10.10.2 IP address 255.255.255.0

    automatic duplex

    automatic speed

    card crypto Petaluma_1

    Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.

    Let me know if it helps.

    Thank you

    Loren

  • debug output is not

    My suddnely of CF9 server stopped showing debug output. Debug output is set to Yes and I have the correct ip address. I even tried < cfsetting showDebugOutput = "true" >, but nothing appears. Any ideas?

    Found the problem. When upgrading to Windows 10, the prioritised card vpn setting the IP Address of the server instead of my local ip. I tried to use the DHCP protocol listed in ipconfig for VPN, but it did not work. Then, I changed the setting of the adapter for the VPN connection to use my local IP address and it worked.

  • Disable debug output

    Hey,.

    I'm creating XML and generated by coldfusion debug output causes an error. I tried to put < cfsetting showdebugoutput = 'no' > at the top of my page and the error was always popping up. I then called my server host and had them off manually the output of debut, and the error still showed upward.

    The question is how can I know that the error is caused by debugging output Coldfusion... Here's the ugliness which, to my knowledge, is exclusively from this output

    So two questions arise:
    (1) this output can be caused by another source? (and I have checked all my data in the XML)
    (2) what can I do to get rid of this output

    Thank you

    Just as a note, I'm attacked using a different method, I just put all the information as a string and use XMLFormat for nodes... and it worked. There is no error thrown, he ran through the entire script, and then they threw the XML error. Regarding the old code, I've trashed it, thanks to the entry however.

  • Not appearing debug output is not with cfmodule

    Hi, I have a problem here I just can't solve. I have a unique model that contains the code in my header and footer called globalheader.cfm which gives the floor to cfmodule (see the code example below). Everything works, the only problem is that the debug output appear not. Debugging is enabled correctly and presents itself if I remove the tag to cfmodule call globalheader.cfm. Any help would be greatly appreciated.

    Thank you! It wasn't the answer, but it lead me to it!

    The culprit was the cfcontent tag. I used it to remove the white space. I didn't know it would affect the output of debug too. I commented and now I see Debugging.

  • ColdFusion MX 8 Debug Output

    I have installed the edition of CFMX 8 Dev, enabled the debug output, but the output is not displayed. I can access the web pages, but cannot see the output of debuh.

    Any ideas on how to solve this problem?

    Don't know why, but it is fixed. Just reinstalled CF 8, reset the debug settings and now it works.

  • CF8 Developer: debug output?

    I have CF8 Developer Edition installed on my Vista Business PC.
    I tried to put the debug output on (in the ColdFusion - Debgiing & logging admin), but I get no results.

    On my old PC (CF7 Developer Edition on Windows XP), I had no problem to set this up.

    Any idea?
    Thank you

    Sorry, I found the solution:
    In the ColdFusion Administrator - Debugging & Logging, I deleted the list of IP addresses, and now it works.

    (empty list means: send the output to all users)

  • Write Debug Output to the media under the Simulator map

    I'm testing my application using the Simulator with the eclipse plugin (using the simulated device 9700). Simply, I can't open a file. Here is the code I use:

    try {   // filename = "file:///SDCard/debug.txt"
    fileConnection = (FileConnection) Connector.open(fileName);
} catch (IOException e) {
    System.out.println("Could not create " + fileName);
    e.printStackTrace();
}

if (fileConnection != null) {
    try {
        OutputStream out = fileConnection.openOutputStream();
    } catch (IOException e) {
        e.printStackTrace();
    }
}

    Are there settings specific Simulator which must be defined and who could stop me from writing on the SD card in the device? I put 'Use PC file to SD Card file system' and with the path on my PC where I want the file resides. Any help would be greatly appreciated.

    The file exists in your file? If it isn't, your code does not indicate that you create a file.

    So when you try to open an output stream on a file that does not exist, that would not work.

    Steps to follow:

    -Check if a file exists

    -Yes: Open stream and write to the file

    -No: fileConnection.create)

    -Open the stream and write to the file

    PS Don't forget to close the flow of data and file connection when you are finished.

Maybe you are looking for

  • How can I move foldes E-mail to drive?

    I have some old emails in an e-mail folder that I need to save. I want to transfer them to a disk. How can I do this? Alternatively, can I?

  • restore deleted iMessage

    I deleted a conversation in iMessage (the Exchange was between two users of the iPhone).  I get messages on my iMac and my iPhone, but I (believe), I deleted the message then that on my Mac.  I have the Version OS X El Capitan 10.11.2 installed on my

  • Share of undesirable Safari...

    Without knowledge of the facts change all the settings I started to see this icon (see screenshot) which is apparently sharing of safari on my Mac screens.  I made sure that safari (iCloud parameters) of sharing is disabled on all my apple devices. 

  • E20 - graphic integrated does not work

    Hello, I recently acquired an E20 Workstation with a Xeon processor. Unfurtunately the on-board graphics card shows nothing. After all the connection cables and turn the machine, it peeps for 8 times. According to the manual, the problem might not no

  • I am receiveing a startup error.__File: Boot\BCD__Status: 0xc000000f

    I have a gateway DX4720-03 with no changes with respect to the material.He came out of the box with Windows Vista 64 installed. I get the boot\bcd error 0xc000000f I can boot from the recovery disc and the System Recovery Options.It shows not all ope