Device issues Manager

Similar Questions

• EliteBook 8570p: ProtectTools Device Access Manager blocks the upgrade of Windows 10

  Hello

  I can't upgrade Windows 7 Pro for Windows 10.

  (Manual and automatic) installation fails because of the incompatibility of ProtectTools Security Manager (according to Microsoft). This is also described in a document that I found on the HP Web site: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5212912 & docId = docLocale & emr_na-c04734799... .

  Before I can uninstall ProtectTools, I need to uninstall other HP, like Device Access Manager tools...

  And this is my problem: how to uninstall Device Access manager? It is not listed under "programs and features". I tried to uninstall tools like CCleaner and Revo Unistaller, but they can't find it or the other.

  I installed the latest version of ProtectTools, via the SoftPaq Download Manager and disabled all functions of the ProtectTools, as far as I can tell.

  How do I remove subsequently ProtectTools?

  Best regards

  Wim.

  I found a way to remove it on this Web site: http://www.shouldiremoveit.com/Device-Access-Manager-for-HP-ProtectTools-9553-program.aspx

  Run: MsiExec.exe /X {55B52830-024A-443E-AF61-61E1E71AFA1B}

  It fixed for me.

• "Device Access Manager" crashes

  I've got V 8.3.4.1811 HP customer security pre-installed on my new ProBook G2 of 450. However when I try to access the "Device Access Manager" the program hangs and displays this error:

  "at HP. ProtectTools.DeviceAccessManager.BaseViewModel.Load)
  at HP. ProtectTools.DeviceAccessManager.UserPage.OnLoaded (Object sender, RoutedEventArgs e)
  at System.Windows.RoutedEventHandlerInfo.InvokeHandler (Object target, RoutedEventArgs routedEventArgs)
  at System.Windows.EventRoute.InvokeHandlersImpl (Object source, RoutedEventArgs args, Boolean re-raised)
  at System.Windows.UIElement.RaiseEventImpl (DependencyObject sender As Object, args As RoutedEventArgs)
  to System.Windows.UIElement.RaiseEvent (ByVal e As RoutedEventArgs)
  at System.Windows.BroadcastEventHelper.BroadcastEvent (DependencyObject root, RoutedEvent routedEvent)
  to System.Windows.BroadcastEventHelper.BroadcastLoadedEvent (the root)
  to the millisecond. Internal.LoadedOrUnloadedOperation.DoWork)
  at System.Windows.Media.MediaContext.FireLoadedPendingCallbacks)
  at System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks)
  at System.Windows.Media.MediaContext.RenderMessageHandlerCore (object resizedCompositionTarget)
  at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler (object resizedCompositionTarget)
  at System.Windows.Threading.ExceptionWrapper.InternalRealCall (Int32 numArgs, delegate callback, object args)
  to the millisecond. ' Internal.Threading.ExceptionFilterHelper.TryCatchWhen (Object source, method Delegate, Object args, Int32 numArgs, delegate catchHandler).

  Does anyone have an idea how I could solve this problem?

  Hi @Joshua_SVK ,

  Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the linkfor the number of support in your region. They will be happy to help you immediately.
  
  Thank you.

• HP Pro450 G2: Disabling certain features of the Device Access Manager

  I want to transfer data to my new laptop. To do this, I plugged a USB portable device from Seagate. Access to Device Manager then invites me my Windows password. So far I have not (yet) problems, but while I am trying to transfer data (300 GB) which lasts a few hours, the Device Access Manager appears a ball EVERY 15 minutes asking a password confirmation. I want to disable this current 15 minutes for a password prompt. If I'm not in front of the PC and the miss the bubble pop up then data transfer stops and I have to start over. SO BORING.

  As I said, I do not fear demand for a password when the device is connected, but the interval of 15 minutes for a password entry must be disabled. I can't stay here all night when you do backups of data for the ball wating to pop-up every 15 minutes.

  Kind regards

  DaveR

  DaveR2040 wrote:

  I want to transfer data to my new laptop. To do this, I plugged a USB portable device from Seagate. Access to Device Manager then invites me my Windows password. So far I have not (yet) problems, but while I am trying to transfer data (300 GB) which lasts a few hours, the Device Access Manager appears a ball EVERY 15 minutes asking a password confirmation. I want to disable this current 15 minutes for a password prompt. If I'm not in front of the PC and the miss the bubble pop up then data transfer stops and I have to start over. SO BORING.

  As I said, I do not fear demand for a password when the device is connected, but the interval of 15 minutes for a password entry must be disabled. I can't stay here all night when you do backups of data for the ball wating to pop-up every 15 minutes.

  Kind regards

  DaveR

  You can uninstall Device Access Manager for HP ProtectTools without any concern.  It is only there to prevent users from connecting devices and copy the data from external drives.  For most people, it is not even necessary.  Simply go to the Control Panel window and uninstall through programs & features.

• Device Access Manager deactivation possible?

  I have a Seagate 1 TB hard drive connected via USB as a backup (backup software Memeo) of my HP Probook 470 G2 (Windows 7 Pro). The Device Access Manager asking me to authenticate every 15 minutes (approximately). It's very annoying. Is the solution to uninstall the dam s/w and what will be the consequences? Or someone has a better solution to get around the Device Access Manager?

  Rgds

  Tommy

  Thanks for the tips. It works perfectly!

  GREAT!

  Best regards

  Tommy

  Togu wrote:

  I have a Seagate 1 TB hard drive connected via USB as a backup (backup software Memeo) of my HP Probook 470 G2 (Windows 7 Pro). The Device Access Manager asking me to authenticate every 15 minutes (approximately). It's very annoying. Is the solution to uninstall the dam s/w and what will be the consequences? Or someone has a better solution to get around the Device Access Manager?

  Rgds

  Tommy

• Attribute points to the quiz slides using Pools of issue Manager

  Is it possible to assign the points must be reported to a slide when you use Pools of issue Manager?

  If a slide, for example, has 10 points, and another slide is 5 points, when they are both added to a question pool, make loose them their initial number of points and get assigned some number of points chosen when a random slide is added to the pool?

  I hope someone can clarify. Thank you.

  I just checked in Captivate 5 and it seems that the notation is associated to the Question pool, not inserted at random Question slide slide.

  If you are trying to achieve a result where the difficulty of the question has equaled the number of points awarded for doing things, you may need to put in place a number of question pools.  For example a pool of easy questions, another of medium difficulty and a third for really difficult.  Assign points 1 or 2 by default to the easiest, perhaps 5 for medium and 10 points for the hardest.

  That's what I do in fact.

• Device Version Manager: 6.1.7600.16385 presenting no matter what devices or Windows 7 Home Premium 64 Bit drivers? This has already been answered? If you don't see it you can check or update all drivers.

  14/07/13

  Whenever the device driver is selected there is just a blank page that appears. There are no announcements of any drivers anywhere, or visible by any way within Windows 7 Home Premium. For this reason there is no way to check on all the drivers or the parts of the system to see if there is no system conflicts.  I have a driver repair program that when search enabled for and comes with a list of drivers on the computer and indicates the factors that bear on a date and will go through the steps to change but since I have no way to see the driver manager or it's poster so I can't say if something is changed.

  If I have something again plug it into a USB Port, the computer recognizes that something has been plugged, but that it will not open the directory automatically, as it used to do.  For example if I put in a CD or a DVD that has auto start it won't, so it's just sitting there. If I use Windows Explorer and click computer directory will show a device for example: DVD has a DVD named such and so in the drawer.

  Plug-and-Play is selected and activated, but it seems that it does not work.  If I plug a USB key into the USB (any USB port) it sometimes it indicates with a beep or a pop-up window indicating something was plugged or removed as the case may be.

  If this file has been deleted, if it is to cause such a thing?  This computer (gateway) has a grounded partition which has a restore works however it resets all default settings etc. or can erase all files.  If there is a way to download the missing files, which makes Driver Manager do its thing, it would be a good thing. Any suggestions?

  22/07/2013

  Thank you for your suggestions. They were a good start, I followed everything as suggested, but nothing helped.

  1. as to the question was just a new program installed before this problem?  The answer could be Yes. But unknown to you, because I can't be sure of the effective date of what's going on.

  I tried to go back, at an earlier date, but it did not help.

  2. for Plug and Play - he already is set to Auto and is active, but it is grayed out and I can't change it. So it turns out that I'm locked somehow. Even if I am put as an administrator.

  3. I went into the registry and everything what you suggested is already there.

  4. the problem still exists.

  Always looking for HELP

  DwBent

  Hi DwBent,

  I would be grateful if you could answer the following question:

  Were there any software or hardware changes made on the computer before this problem?

  This can cause if the Plug and Play service is disabled (disabled people); I suggest you follow the troubleshooting steps and check if it helps;

  Method 1:

  To resolve this problem, set the startup type for Plug-and-Play on automatic. To do this, follow these steps:

  (a) click Start, click run, type services.msc, and then click OK.

  (b) double click on Plug-and-Play. If you receive a Configuration Manager message, click OK.

  (c) in the Startup Type list, click Automatic, and then click OK.

  (d) Community Services.

  (e) restart the computer.

  Method 2: The other reason, Device Manager may be empty is because there are some security issues with the registry key.

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  (a) go to "Start", click "run", type "regedt32" and press enter.

  (b) expand the "HKEY_LOCAL_MACHINE" window

  (c) scroll down to "SYSTEM\CurrentControlSet\Enum".

  (d) with 'Enum' selected, click on "security", "Permissions" menu

  Note: At this point, you'll probably notice that there are no permissions on this key.

  (e) click on 'Add'.

  (f) add the group "everyone" and the "SYSTEM" user.

  (g) select "everyone" and check the "read" ONLY!

  (h) select 'SYSTEM' and check the 'total control'.

  (i) click on the button "Advanced" at the bottom of the window.

  (j) on the control of the Advanced window "Reset permissions on all child objects... »

  (k) click on 'OK'.

  (l) in the warning window click "Yes."

  (m) to close the registry editor and check with the question.

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Re: Toshiba DVGW/hd ts-l802a ata device issues

  Well, I'm not sure what happened, but between last week and this week, when I insert a CD or DVD in my laptop, it does not read them. In my device manager, there's a little warning! symbol "Toshiba DVGW/hd ts-l802a ata device" under CD-ROM/DVD-ROM drives. It shows this message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I don't know if I uninstalled something by accident, or if it is another problem entirely. Can someone please tell me what to do? I want to be able to play movies on my computer again!

  Thanks in advance!

  Hello

  What operating system do you use?

  If you are using Vista, please check http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• Sound on my computer is no longer working and device gray Manager

  Original title: the sound on my computer has been noise when she slipped now my speakers do not work and the field in the Device Manager pages are gray and cannot do anything and also, they say they are working

  I got my computer fixed and is going to use the sound from the speakers there is no sound, I went to the Device Manager and the pages where you mount the volume is gray and I'm not able to change anything.

  Hello
  Do you know what that the technician who did to the computer in order to fix it?
  What is the brand and model of the computer?

  Looks like you need to download the required drivers for the computer. Go to the manufacturer website and search for your specific model computer. Download all recommended drivers, and then restart the computer.

• found new hardware wizard appears and unknown device device Watch Manager

  Since a few days ago, the Add New Hardware Wizard keeps popping up. I looked in Device Manager and found an unknown device (yellow exclamation mark) should I delete the device? I don't know what to do to identify which device is unknown.

  If you remove it, then he'll probably be back the next time that you start.

  go to start / all programs/windows update (at the top of the list of the menu), custom search, watch your optional hardware updates and search for a driver that you have not already installed, you can get lucky. Otherwise post the details of your specifications and ask again.

  Furthermore, it can take a while to get the pages updated and you may need to install active x on the way, a line will appear at the bottom of the fixed part of your browser screen (the same as when you download) If this is the case, click on it and install active x, then a box should appear and tell you allow I think.

• Why is my lack of training:, but the drive is listed in the devices/hardware Manager

  OS Windows XP Pro, two identical computers both with USB 2.0.  The Freecom 250 GB external hard drive USB comes and works ok on one but not on the second PC.  Its icon appear briefly in 'My computer', but disappeared when I tried to access.     The drive appears in "Device Manager" under "drives" like Samsung HM 250JI USB Device. "  He was also listed as a USB Mass Storage Device in 'Remove hardware safely' but no drive letter.

  I have re-formatted the USB key as a drive on the first computer, one also made by error-checking complete to include repair and defragmentation, whereupon I transferred the drive to the second computer, but without success.   Maybe I should give up just the drive because I have a very good IOMEGA USB drive.

  I would be grateful for any advice.

  Richard Steiert.

  Hi Richard,

  Try the following.

  Method 1: Run the Fixit tool in the following article.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  
  Method 2: update the computer with the latest chipset drivers and also any other device drivers. Log computer manufacturer site to do so.

• Is deactivation of an element in the device enough Manager to avoid performance problems?

  In Device Manager, I show two entries that have an open red on them when x. One is called Intel 537EP Modem and the other multimedia Audio Controller. The element of this second icon is a yellow question mark. Both are disabled in the properties. Deactivation is enough to remove them from the list of things THAT XP tries to start or load when I boot? I have a slow start; about 4.5 minutes. I don't know what is the modem. I use a USB wireless to a router in the House that goes to a DSL connection. I didn't use a modem for dial-up days. And I don't know what this audio controller - I have a sound card Sound Blaster Audigy which works very well. I tried to look into the BIOS to see if there was an additional way for XP does not try to access these two elements x'd, but could not find either.

  The 537EP is a voice / fax modem I think and the audio system may be integrated multimedia audio controller (because you use a soundblaster (which is a PCI/PCI-E card)? SoundBlaster island isn't on board / part of the motherboard?

  Disable the audio system built into the BIOS. The only way to remove the entry of the modem in Device Manager, open the case and remove the modem

  Double-click the modem entry, what is the error on the general tab?

• points mark in his device and Manager cards.

  Help with Windows xp home media player and question marks in Device Manager.

  My windows media player keeps giving me an error report that no card sound or sound devices are available to this end.  I used to have these but I had to completely reinstall the home edition of windows and now they are gone and also in my device manager there are question marks in the other devices list: one for card audio sound and a VGA compatible video controller and the other is a USB bus controller. I tried to download the Realtek drivers and who won one of the question marks, but I am at one total loss for others.

  Thank you.

  Thank you! I will try the two solutions above and pray for the best.

• CD Rom appearing suddenly didn't not in device/computer management etc. in Vista. Also won't eject.

  Yesterday I was burning a CD of some of my music to take work and listen. After burning 4-5 songs there was an error (windows media player), and he could not burn the rest.

  I click OK and you quit the program and then went to myCD of ejection, and it did not open. Then I go to my computer to select eject, and it not there no cd drive listed suddenly and not in the Device Manager either.

  The light on the cd rom is always bright green constantly, but he will not answer or try to open when I press eject. And it does no sounds as if she is trying to read a disc or some such.

  I tried to restore system 2 days ago, but it has not fixed the problem. I tried this stall and hanging save nothing doesn't. "I tried the Mr. Fixit program from the microsoft site, and it DETECTS the problem and said ' drive of CDrom/not recognized" or others, but has a red X next of saying he couldn't solve the problem.

  I also tried to go intoo, regedit HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Class /.
  {4D36E965-E325-11CE-BFC1-08002BE10318} then delete upper and lower filters (mine had superior) and reboot. And still nothing.

  It's very frustrating because I'm an avid computer gamer and you can insert is no longer my records of game for play/etc.

  I would be grateful if someone could help me fix this soon and please put in laps/stages I understand beyond. Apart from the games and the internet, I'm a newbie to tech.

  Thank you so much in advance!

  -Poe

  The stuck CD tray:

  http://www.ehow.com/how_2324559_eject-stuck-DVDCD-drive.html

  Straighten a paper clip and use it.

  http://video.about.com/pcsupport/open-a-stuck-drive-on-your-PC.htm

  A video about it.

  See you soon.

  Mick Murphy - Microsoft partner

• I have no sound in windows vista and when I try to not go to device, sound Manager, video tab and to develop to this end game controllers cannot tell if I have a driver. Any help?

  I read on how to fix sound on windows vista, but each of them includes opening sounds and video game controllers in Device Manager. But I did that tav.

  Open Device Manager, click the view menu, click Show hidden devices

  To view nonpresent devices in the Device Manager follow the steps below.

  Control Panel, system, System avancΘs, Environment Variables

  Under system variables, click New,

  For the name of the Variable: type: devmgr_show_nonpresent_devices

  For the value of the Variable: type: 1

  Click OK, OK, apply, OK

  Go back to Device Manager, click on view devices, then click on the + to expand the group if not.