Change router-out; anyone see the printer except this laptop running XP

Similar Questions

• I have a HP officejet K-550dtn. New wireless n router. I can't get the router to see the printer.

  This printer used to work properly as a network using Actiontec or Linksys printer b/g router.  I upgraded my network for a 802.11n system and I cannot get the new router to see the printer.  After several hours of fighting, I find that the printer configuration page shows its IP address as 192.168.1.103.  Unfortunately, the DHCP server on the new router uses address 192.168.0.100 - 192.168.0.200 only.

  The disc that came with the printer does not work in one of my computers, because the BONE is newer than Win XP.

  Any ideas on how I can change the internal IP address of the printer to something the router will recognize?

  I wouldn't get rid of this printer, since it is always does a great job.

  (I can still print to the printer with a computer server network address to which it is connected by a USB cable, but requiring everyone goes up to this computer before making the print command in order to ensure that it is not hibernation.)  If I can't print directly via the router, I think I will return the router and go slowly until I can't take it anymore.

  Thank you

  Dweezel

  I finally understood that.  Here's how, in case someone else meets this.

  I don't mention that there is a Verizon FIOS router behind the wireless-n router, and it uses the model of 192.168.1.XXX.

  On a hunch, I ping the FIOS router, and there was a response.  The K-550 ethernet cable was plugged into the wireless n router and I tried it ping 192.168.1.103.  No response.  I then connected the ethernet printer cable in one of the connectors of the FIOS router replacement.  He ping again and got 4 beautiful quick returns.

  I moved to one of the computers on the wireless network and checked to see if the printer was there.  Joy!  There were two cases.  One was the connection recently configured via the USB port on the server computer.  The second was through the previously used x.x.x.103 port.  I can print using this forum, and I made it the default printer.

  It had not occurred to me to use a port across the wireless n router.

  Dweezel

• I want to install a MB2320 of Maxify, but am not able to see the printer from my iPhone, airprint

  I want to install this printer and managed to communicate with her since my main PC via USB, LAN and Wireless LAN.  I noticed however was able to get the feature Airprint works.

  I also have intalled the Pixima/Maxify app on my iPhone and it says it can not see the printer.

  I read on line materials, but must be missing an important detail.

  OK, here is the "rest of the story.

  There is a setting where the Administraitor password can be completely removed.

  I removed it, and all my devices can connect to the printer via my wireless access Point.

  I say that Canon hotline has been the best exeriance I had with an assistance service.  3 calls, zero waiting, when I called back to work, the automated service knew it was me and saved all my information.  Support staff were helpful and courteous.  A reason more than I bought another Canon printer.

• Install HP does not see the printer in network, Windows DOES. Help!

  Hello

  I am trying to add my HP Officejet k8600dn to Windows 7 (32 bit) so I can scan, but the HP Installer (add device) can not see the printer. The unit is set up by cable to a switch on my network via an ethernet cable. If I go into the menu "Add a printer" Windows, I can install the printer very well. But I have to be able to scan and I don't know what to do.

  Tips on getting functional analysis if the HP software is unable to see my printer? Subnet mask and gateway on the printer are the same for the computer and the printer. I typed the correct IP address in the "Add a device" menu of HP, but he sees not just it. ARRGG!

  Thanks for any help!

  Hello

  I think that there is some confusion because the Officejet k8600dn is only a printer, it is not a multifunction device and does not provide the capability of scanning.

  You can find the specifications below:

  http://support.HP.com/us-en/document/c01287217

  If you have any different model printer, please specify the exact model.

  Kind regards

  Shlomi

• Dear Sir/dear Madam, two days ago I registered to use creation of cloud photography package 300 THB per month LR + PS. And I see the promotion for this package 240 THB per month. Could you please help to change promoting 240 THB? Thank you.

  Dear Sir/dear Madam, two days ago I registered to use creation of cloud photography package 300 THB per month LR + PS. And I see the promotion for this package 240 THB per month. Could you please help to change promoting 240 THB? Thank you.

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Photosmart 8250 not recognized by my iMAC... How can I get my iMAC to 'see' the printer?

  I'm trying to connect my HP Photosmart 8250 printer to my iMAC (under Snow Leopard 10.6.4) via the USB cable. I downloaded and installed the drivers for HP printers on Apple's site, but when I go through the "Print & Fax' tile instead of '+' and then 'add printer' is not in the list of printers as if the iMAC does not see the printer...» Help please.

  Thanks for the help... Initially, I tried reseting the printing system, but has not helped.

  Ultimately after some trial and error, it seems the HP Photosmart printer is somehow 'paired' / 'connected' with my MacBook Pro. So he can register on my iMAC, you must remove first of the queue on the MBP and then it appears on the iMAC and may be included in the queue on the iMAC... even if it's just through a USB cable.

  Thank you.

• Removed from Garmin using MSconfig and now I can't print. The print spooler is not running

  I wanted to speed up my computer and remove an item off my msconfig.  Now I can't print. missing spooler.  What should I do?  I tried dating back to some time earlier, but all previous changes are missing

  Operation could not be performed.  The print spooler is not running

  the question I wanted to delete was for Garmin

  don101947

  Hello

  I don't know if you have already solved the problem of the other answer, but here's something you can try if your not confident using the command line.

  Go to [start],-> [Control Panel]-> [administrative tools]-> [Services]

  Depending on if your running XP, Vista or 7 you can have 2 tabs at the bottom of the window you see.

  Select [Standard] if its not already selected. If you already have a large list, skip this step.

  Scroll down and find the print spooler. Double click it, and then set the "Startup type" to [Auto]

  then click [OK] and then make a right click again print spooler and select [start]

• Laptop computer connection directly to a projector and cannot see the screen of my laptop

  I'm trying to figure out how to display the screen of my laptop via a projector and also be able to see the screen of my laptop.  When I hit the function key for display on the big screen, my laptop darkens.  I found a post on this forum on the connection of additional views or projector (Set Up Multiple displays). When I go to Mobile PC and display to choose settings listed in the answer (mirrored, extended, etc.) aren't there.  My laptop is running Vista Business Service Pack 2 and two weeks.  Thanks for any help you can provide.

  Hello Shawn,

  Thanks for posting on the Community Forums of Microsoft Vista.

  It should probably be shortened on your laptop keyboard to turn on the visible screen (for example Fn + F5). Try these until you can see the image on the laptop monitor.

  Also, follow the steps and try to set the screen parameter as follows:

  (1) right click on the desktop, click Properties, and on the display settings, choose monitor as your main graphics card 1.

  (2) setup that monitor the as a 2nd external display (projector).

  (3) click on apply and Ok.

  Restart the computer to see if you are able to see the screen on laptop and projector.

  You can also check with the computer manufacturer to check if they have additional parameters to be changed.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't connect to the internet on this laptop wireless

  Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• Windows 7, the printer Dell Photo All - in - one 922; Win7 says it has the most recent drivers, can see the printer, but tells me that the printer needs to "help out." interfacera not; updated drivers downloaded from Dell, but Win7 will not identify them.

  Well, it's a long story, but EDH to; I had problems with my printer works with Win XP. The same problem as now with Win 7.  I have e last driver of Dell, but Win7 says that drivers are up-to-date.  The printer appears in the Device Manager, but has the yellow triangle with (!) to score on this subject.  When I go to troubleshoot, it says it can't find the updated driver on the internet or the CPU.  Win7 says that the printer says that's not covering, check USB port, etc... I uninstalled the driver, let W7 update, and the printer still does not work.  What is the reference for this? Thank you... Corn

  http://support.Dell.com/support/downloads/index.aspx

  You get your Dell printer drivers; NOT through Windows Update.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• some domain users can not see the printer

  Hello

  We have a suite mixed TECHNOLOGY in schools:

  -a Server Windows 2008 newish

  -some 6yo Fujitsu customer's PC

  -some nine HP client computers

  HP thin clients have been compiled via WDS from the old Fujitsu customers.

  We have, in fact, three types of users: administrator, staff and students - with a reduction of administrative privileges.

  I have the weirdest problem - when I connect to new customers of HP as a student, I don't see the list of printers, so they cannot print to the network printer. The staff can print OK, and students can print (as they always could) when connected to a former customer of Fujitsu.

  I've tried everything I can think of, such as

  -Reinstall the printer locally and as a domain administrator - no joy

  -don't connect to a network printer shared by another machine - no joy

  -security settings on printer sharing

  I can't believe it's a server problem, as nothing is changed there, and it is specific to the type of user and the type of customer, and all other combos work OK. I have run out of ideas and will accept with gratitude any help staff is running out of patience.

  Thank you

  SAL

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• OJ 8500 A910 Pro - iPhone does not see the printer on the network?

  I have my HP OfficeJet Pro 8500 A910 connected to my wireless network.  The printer found the network and now has an IP address.  My iPhone is also connected to the wireless network.  I can see both devices on the router.

  When I walked into photos and try to print a photo, he says to choose a printer.  When I click on choose, I get "No Printers Found.

  Any thoughts?

  Hey k9rescue!

  Sorry to hear that you are having a problem with AirPrint. What iOS version are you running? And what iPhone model do you have?

  Additionally, if you are unsure that your device supports AirPrint, try to turn your bluetooth off and see if the printer appears.

  Let me know if it helps!

• Photosmart 5510 MacBook Pro with OS 10.9 does not see the printer on the network

  Continues to give the error message that the printer is offline... in the process of installing it says successful implemented, but impossible to find the printer on the network... I has not changed anything, unless there was an automatic update done some part/sometimes recently... it was working fine.  The self-test on the printer wireless past everything!  iMac and iPad see & print!

  Please help me!

  Oh, Yes, it appears in the list of devices printer twice: once HP 5510 series when connected by USB, and once as 77 has 267 with everything what unknown IP connection but State... is one that says offline and cannot be found on the network.

  I tried all the steps listed in the proposals of the forum without success.

  Hi msdok,

  I understand that the printer is appearing offline even if you can print from the iPad and iMac. I see your message that you have already done some troubleshooting, but I'm not sure what you tried. I recommend using the steps below if you don't have it already.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• test page, cannot print would you like to see the printing for assistance Troubleshooter

  printer hp laserjet 1160 on network it does not see the test page cannot print you want to see the convenience of printing support? operration could not be completed (error 0x00000007a)

  Thai languagers of BONE windown7

  Hi aomsin.

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  Method 1

  See the link below and try them the steps mentioned, check if it helps.

  Network printer and wireless.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/HP-LaserJet-1160/TD-p/459673

  Method 2

  If the previous step fails, then run the printer Troubleshooter and check if that helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• Windows 7 latop stopped to 'see' the printer wireless

  Recently, my windows 7 extremely connected to my home hub wireless laptop stopped seeing my wireless printer.  I above desk connected via Ethernet cable to the hub.  He can see the wireless printer.  So I don't think that the fault is with my hub or the printer.

  It also happens when I select the network icon in Windows Explorer to the laptop I have now no longer 'see' my drive WD RAID ("plugged" into the hub).  I get it specifically by typing in the address (\\MYBOOKLIVEDUO\DocumentReplica).  And once I did the WD drive is now listed under Network (but disappears again once that I reboot).

  These two conditions occur simultaneously and seem to be the result of the same underlying problem.

  Anyone know what I might be able to do to solve this problem?

  Chris W

  Find the solution advocated for "Peer-to-Peer network error 0 x 80070035 the network path was not found" by Arthur Xie to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/955717b7-9ea3-424C-9b3a-719520f1b043

  ... has worked.  Thanks to Arthur

  Concerning

  Chris