device Mangr. Watch the unit once the next time point device

I tried to update my drivers with Driver Detective program. In the Device Manager. sometimes shows three inscriptions of IEEE1284.4 and sometimes shows not the whole list. In addition there is no registration for a HP 4300 printer while the printer works very well. I reinstalled completely all the HP software. I also tried eating dev. > Edit > show hidden devices. I'm really not knowledgeable about computers, so if anyone can offer any suggestions, I'll be very grateful.

Thank you
Ian Boehm

1. programs like Driver Detective are unnecessary and often do more harm than good.  The general rule of the drivers is 'if it ain't broke, don't fix it."or in other words, unless your device is faulty and you know that a driver update will fix it, or if a driver update adds a new feature that you want or need, there no need to update the driver.

2 printers generally do not present in Device Manager.  You are dealing with printers in the control panel > printers and faxes.

3. There are only two reliable sources for device drivers:

  • Your computer manufacturer should be consulted first because (especially for laptops), the manufacturer may have customized drivers for hardware that is not available at a retailer.
  • If the computer manufacturer does not have a driver (or a website), or if you have customized a computer, get the driver from the device manufacturer.
  • You should never (for Windows XP) get the drivers from Windows Update, and except in extreme circumstances, such as obsolete equipment is longer supported, you should not get drivers from third party sites, and certainly not a site that makes you pay for one.

When you open Device Manager, you will see the warning icons?  Otherwise, you should leave well enough alone and not try to update the device drivers

Tags: Windows

Similar Questions

  • Once I have delete the message the next time I check my emails on my PC messages I deleted the return.

    I use windows live mail to get my email on my PC, but when I remove the message the next time I check my emails on my PC messages I deleted the return.

    Original title: Windows live mail

    It is a common mistake.  Periodically, you must connect to the web page of your webmail provider and empty your Inbox.  Also set your account to delete mail in his Inbox either Windows Live Mail delivery or a few days later.

  • I tried several times to set up an email account with Thunderbird, but the next time I start the computer and start Thunderbird, no account is displayed.

    I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
    Then, I tried to set up the e-mail account manually (in IMAP) following the instructions here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but can't set the mail server outgoing smtp correctly (I could receive mail but not send them). Subsequently, I deleted this account. Then, I started the automatic mail with UPC Cablecom under the http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistant.exe link tool and he did successfully set up the account, however, because a POP3 server account. As I was not happy with it, I deleted the server of incoming POP3 mail (and lost the e-mails received, of course...) and retried a manual installation. In doing so, I got an e-mail account IMAP incoming more two outgoing SMTP server (comparing them, I also understand the configuration error that I had done the first time). I then deleted the manual as SMTP server the automatically the installation server worked correctly.
    In this context, accepting them and sending E-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird was asked to set up a new account again. I have successfully set up manually once more, but the same problem resurfaced at the next startup, the e-mail account was gone...!

    Thank you in advance for your help!
    Maxonce

    Verify which profile is used.

    AppMenu button - help - troubleshooting - profile directory - Open Directory information

    Your profile folder should open in Windows Explorer. What is the location of the profile?

    Restart your computer and repeat the steps above. The profile folder has changed?

  • Updates the window appear when shutting down, but do not set up the next time you start

    The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

    Hi BonnieDoon,

    1. did you of recent changes on the computer?

    2. you receive error message during the update by installing the process?

    Method 1

    See the Microsoft article below as well as try the steps mentioned and check if it works.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

    Method 2

    Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

    View update history to know which update is not installing.

    (a) open Windows Update by clicking Start , all programsand then click Windows Update.

    (b) in the left pane, click view update history.

    (c) to view more information about an update, double-click it.

    Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

    http://www.Microsoft.com/downloads/en/default.aspx

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I made three new folders and put bookmarks in them. the next time I open bookmarks, none of these works was saved / fact. What happened to my new folders?

    I have created folders and put a number of bookmarks. the next time I went to Favorites, none of my work was saved, I was back as it was before, nothing does not get lost, but has nothing. Why my files not be saved?

    Hello

    Firefox automatically creates backups of your bookmarks, which can be useful if your bookmarks are lost or missing. To retrieve them, follow the instructions below.

    1. Use one of the following methods to open the bookmarks library window:

      • Firefox 29 and above: Click the Bookmarks button

        then select show all bookmarks.

      • Previous versions of Firefox: Click the Firefox button and click on bookmarks. (If you do not have a Firefox button, click on the Bookmarks button

        or the menu of bookmarks and select show all bookmarks.)

    2. At the top of the library window, click on import and backup , and then select restore.
    3. Click on the date of the backup of bookmarks you want to recover.
    4. In the new window that appears, click OK.
    5. Your bookmarks in the selected date should now be restored.

    For more information, see the article restore bookmarks from a backup or move them to another computer . For alternatives, see the article of recover lost or missing bookmarks .

    This solve your problems? Please report to us!

    Thank you.

  • Want Firefox to save your tabs for the next time it starts?

    FF 27.0.1 on Linux Mint XFCE 16, up to date.

    I have my preferences set to "show my home page".

    Whenever I close FF with the X in the upper left corner, he gets up and asks me "do you want Firefox to save your tabs for the next time it starts? I check the box to ask next time and have tried both save and exit and just left. When I open the browser again, it seems to randomly decide to open all the tabs I had last time, or sometimes (rarely) just my home page tabs.

    I don't want to open all the tabs I had open, and I don't want the question whenever I have leave FF. I used FF for years with XP, but I am new to Mint.

    Done setting the prefs 'warnon' on the topic: config false page has an effect any?

    • browser.tabs.warnOnClose
    • browser.tabs.warnOnCloseOtherTabs
    • browser.warnOnQuit

    Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

    If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
    Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  • I post a photo in a forum, and then the next time I check he is gone, but the message is still there. I'm not the only one, in that what happens

    I posted the picture with the message. The next time I checked, that he was not there but the message was still there! I checked with the same site on Internet Explorer and it's here!

    You can try to reset Firefox. Refresh Firefox – reset the parameters and modules

  • I set Google as my homepage. The next time I open it, Google opens as my homepage, but the next time I open it, it goes back to Firefox. Why it will remain not as

    After that I set Google as my home page, it will not stay as my home page. The first time I open Firefox after you set Google as my home page, it will work. But the next time I open Firefox, it is back to the opening of the Firefox home page. How can I get there like Google?

    See:

  • How can I save my tabs for the next time I open the browser?

    In the previous edition (3.6.12) if I want to close my pc, I had the ability to save my tabs for the next time... I can't find this option in this version.

    Firefox 4.0 automatically saves your session when you close Firefox. Next time you open Firefox, click on the link of the Previous Session restoration on the default on: Home home page or in the menu of the Session previous restore point in the history of menu drop-down.

  • How can I keep the links I click on that since highlighted, especially when I visit your site, the next time?

    Whenever I visit a site (like craigslist) links I click on are highlighted (or turn from blue to purple) and saved the next time I visit your site, allowing the next person to see exactly what links I have chosen. Is there a way to disable this application?

    Try to clear your browser's cache.

    Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

  • Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»

    attaches to the iPhone

    Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»  Currently up to 9. How can I stop this from happening? Or is it still important?

    Hello StevenHuurman

    Try this.

    1. turn on WiFi tethering via the iPhone.

    2 connect the system to the iPhone tethered via the wireless connection.

    3. without closing the iPhone tethering, disconnect the straps of the iPhone system.

    4. now reconnect the system to the loin and Note If the wireless connect denominator increases.

    For the above steps, if you have access to other computers, then try the same steps and allow to know the results of these institutions.

    If the denominator goes up so we know it is a problem with the system and if not then whenever you turn off modem, then again on the iPhone are considered as a new network connection and something has changed in the phone.

    Another thing, you have selected the option for the system to connect automatically when this network is in range?

    Unfortunately I do not know what version of the OS you have here are the steps for Windows Vista and Windows 7. During the installation process for Windows Vista and Windows 7, you will see the option "connect automatically when this network is in range. Make sure that you click this box when you configure the connection to the loin.

    Let me know the results. Thank you.

  • I recently downloaded XP service pack 3. the next time that I loged on my Wi - Fi, I noticed the public "wi fi" logo Can I get rid of him?

    I recently downloaded XP service pack 3. the next time that I loged on my Wi - Fi, I noticed the public "wi fi" logo Be skeptical, I Googled it and found out what it was. Can I get rid of him?

    original title: Xp service PAC 3 gave me ' free public wifi ' how can I get rid of him?

    Disable adhoc networks.  See this: http://8help.osu.edu/3655.html

  • How can I change password to get into my computer? I am now in my computer, but want to change for the next time I open it.

    How can I change password to get into my computer?  I am now in my computer, but want to change for the next time I open it.  Thank you.

    Click Start, click your account at the top right picture, click on 'change your password '. You must then enter the old password and a new.

  • My computer crashed when I was in Lightroom 5.7 and I can't on it comes back with a message will attempt to fix the next time it runs, but how it can with this message is blocking it.

    My computer crashed when I was in Lightroom 5.7 and now a message appears it will try to fix it the next time it starts but how it will launch when this message is blocking.

    Go to the same folder as your catalog file, find a subfolder whose name ends with Previews.LRDATA. Delete the subfolder Previews.LRDATA. Do not remove anything else.

  • Trying to open the message box appears 'lightroom has encountered an error when reading the preview cache and needs to stop smoking' Lightroom "Lightroom will try to solve this problem, the next time that it launches" OK when you press closed Lightroom an

    Trying to open 5 Lightroom, a message appears 'Lightroom has encountered an error when reading the preview cache and needs to quit' "Lightroom will attempt to solve this problem, the next time he throws" when OK key Lightroom quit unexpectedly and the computer returns to the office.  This persisted for 2 days and it has not set itself.  help please.

    Click OK close Lightroom.

    You must manually go to the location of your Lightroom by Finder catalogue / file Explorer and get rid of the Previews.lrdata folder

    By default, the location would be in Pictures\Lightroom folder

Maybe you are looking for

  • Satellite A60-106: where to find a compatible CD/DVD player

    Replaced HARD drive has attempted to load the operating system (windows original xp recovery and/or linux mint) both drives recognized and started the linux disc is a cd live and worked but when trying to install hard disk two systems reached about 2

  • Master sync hardware

    In the system definition file, under chassis, there is a setting for Master Unit of synchro material. Docs VS portrayed thus: *************************** Setting a hardware Master chassis synchronization device A chassis control hardware device contr

  • Math.Random () does not work in BB

    Salvation; I just want to ask if the BB API, can give the possibility to generate a number of random if yes how can I do; generally in java J2SE: I CAN DO THIS: choice = (int) (Math.Random () * 3 + 1); "to generate a random number ' 3 nomber. I try t

  • What is true of the bb OS?

    Hello I always wonder what is the real BB OS, like linux, are intended to dalvik?

  • DNS DHCP pool (internal DNS issue)

    I know that we can implement several DNS server under DHCP pool. But I want to assure the order. I have several branches. Let's say 1 division Office has a router with 10.30.1.1 as a default gateway. Our internal DNS is 10.0.0.1 and 10.0.0.2 as Pri a