DFS (DFS 2003 and 2012 DFS) parallel configuration

Similar Questions

• Upgrade of Windows 2003 to 2012 r2 DC replication problem

  Hello

  I added R2 2012 Windows server to windows 2003 sp2 (primary DC) DC and promotes as DC. After the promotion, I run dcdiag and it shows errors.

  Each of the servers have three NICs connected to different networks.

  Please help me with your expertise since I have to raise this Monday.

  Thank you

  Kind regards

  Charaf-eddine

  Here the dcdiag output new DC

  Directory Server diagnosis

  Perform the initial configuration:

  Trying to find the server at home...

  Home Server = CADPDC1

  * Identified AD forest.
  Made the initial collection of information.

  Make the required initial tests

  Test server: Default-First-Site-Name\CADPDC1

  Commencement of the trial: connectivity

  CADPDC1.engineer.com host name resolution error by

  IPv6 stack.

  WARNING: could not confirm the identity of this server in the

  Directory and names returned by DNS servers. Host name

  fixed error 0x2af9 "host is known."

  ......................... CADPDC1 passed test connectivity

  Primary testing

  Test server: Default-First-Site-Name\CADPDC1

  Commencement of the trial: advertising

  WARNING: DsGetDcName returned information for

  \\cadpdc. Engineer.com, when we tried to reach CADPDC1.

  SERVER IS NO ANSWER or IS NOT considered AS APPROPRIATE.

  ......................... CADPDC1 was not able to test advertising

  Beginning of the test: FrsEvent

  There are warning or error events in the last 24 hours after the

  SYSVOL is shared.  Don't not SYSVOL replication problems can cause

  The Group of political problems.
  ......................... CADPDC1 test FrsEvent

  Commencement of the trial: DFSREvent

  ......................... CADPDC1 test DFSREvent

  Commencement of the trial: SysVolCheck

  ......................... CADPDC1 test SysVolCheck

  Beginning of the test: KccEvent

  ......................... CADPDC1 test KccEvent

  Beginning of the test: KnowsOfRoleHolders

  [CADPDC] DsBindWithSpnEx() failed with the error-2146893022,

  The name main target is incorrect...
  ATTENTION: CADPDC is the owner of the schema, but does not meet the DS RPC

  Bind.

  [CADPDC] LDAP bind failed with error 8341,

  A directory service error has occurred...
  ATTENTION: CADPDC is the owner of the schema, but does not respond to LDAP

  Bind.

  ATTENTION: CADPDC is the owner of the domain, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of the domain, but does not respond to LDAP

  Bind.

  ATTENTION: CADPDC is the owner of PDC, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of PDC, but does not respond to the LDAP bind.

  ATTENTION: CADPDC is the owner of RID, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of RID, but does not respond to the LDAP bind.

  ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

  meet DS RPC Bind.

  ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

  respond to LDAP Bind.

  ......................... CADPDC1 failed test KnowsOfRoleHolders

  Beginning of the test: MachineAccount

  ......................... CADPDC1 test MachineAccount

  Beginning of the test: NCSecDesc

  ......................... CADPDC1 passed test NCSecDesc

  Beginning of the test: NetLogons

  Cannot connect in the NETLOGON share. (\\CADPDC1\netlogon)

  [CADPDC1] An net use or LsaPolicy operation failed with error 67.

  The network name was not found...

  ......................... CADPDC1 failed test NetLogons

  Commencement of the trial: ObjectsReplicated

  ......................... CADPDC1 test ObjectsReplicated

  From test: Replications

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = ForestDnsZones, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = DomainDnsZones, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: CN = Schema, CN = Configuration, DC = engineering, DC = com

  The replication generated an error (1727):

  The remote procedure call failed and did not execute.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:06.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: CN = Configuration, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:07.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  ......................... CADPDC1 failure test replications

  Beginning of the test: RidManager

  ......................... CADPDC1 failed test RidManager

  Commencement of the trial: Services

  ......................... CADPDC1 test passed Services

  Beginning of the test: SystemLog

  A warning event occurred.  Event ID: 0x000727A5

  Generated time: 27/06/2014-17:01:38

  The event string:

  The WinRM service is not listening to the WS-Management requests.

  A warning event occurred.  Event ID: 0 x 80050004

  Generated time: 27/06/2014-17:05:03

  The event string:

  HP 1 GB 2 332T adapter ports Ethernet: the network link is down.  Check that the network cable is connected correctly.

  A warning event occurred.  Event ID: 0xA004001B

  Generated time: 27/06/2014-17:05:06

  The event string: HP NC112T PCIe Gigabit Server Adapter

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:39

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was LDAP/cadpdc.engineer.com/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:39

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was ldap/cadpdc.engineer.com/*** address email is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:41

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was of cadpdc$. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:43

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was GC/cadpdc.engineer.com/engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  A warning event occurred.  Event ID: 0x000727AA

  Generated time: 27/06/2014-17:05:43

  The event string:

  The WinRM service could not create the following SPNS: WSMAN/CADPDC1.engineer.com; WSMAN/CADPDC1.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:55

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was cifs/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  A warning event occurred.  Event ID: 0 x 84350444

  Generated time: 27/06/2014-17:05:58

  The event string:

  Information System Officer: health: Post errors have been detected.  One or more errors of Power-On-Self-Test were detected when the server starts.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:59

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was E3514235-4B06-11D1-AB04-00C04FC2DCD2/5122bd13-c8ac-4265-a879-3a6831224994/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:59

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was ldap/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000410B

  Generated time: 27/06/2014-17:05:59

  The event string:

  The request for a new account identifier pool failed. The operation will be retried until the request succeeds. The error is

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:06:07

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 27/06/2014-17:06:30

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041D

  Generated time: 2014/06/27 17:07:07

  The event string:

  The processing of Group Policy failed. Windows could not resolve the user name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 2014/06/27 17:11:32

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 27/06/2014-17:16:33

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:16:38

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/5122bd13-c8ac-4265-a879-3a6831224994._msdcs.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 2014/06/27 17:21:35

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  ......................... CADPDC1 failed test SystemLog

  Commencement of the trial: VerifyReferences

  ......................... CADPDC1 test VerifyReferences

  Running partition tests: ForestDnsZones

  Beginning of the test: CheckSDRefDom

  ......................... ForestDnsZones passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... ForestDnsZones passed test

  CrossRefValidation

  Running partition tests: DomainDnsZones

  Beginning of the test: CheckSDRefDom

  ......................... DomainDnsZones passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... DomainDnsZones passed test

  CrossRefValidation

  Running partition tests: schema

  Beginning of the test: CheckSDRefDom

  ......................... Schema passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... Schema passed test CrossRefValidation

  Running partition tests: Configuration

  Beginning of the test: CheckSDRefDom

  ......................... Configuration test past CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... Configuration test past CrossRefValidation

  Running partition tests: engineer

  Beginning of the test: CheckSDRefDom

  ... engineer passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ... engineer passed test CrossRefValidation

  Running tests of the company: engineer.com

  Commencement of the trial: LocatorCheck

  ... engineer.com passed test LocatorCheck

  Commencement of the trial: cross-site

  ... engineer.com passed test intersite

  Hi Chamarasi,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• ThinApp - I can't install Excel 2003 and Access 2003 on the same machine

  Hi all

  I have a problem and I can not solve. I have two packages of creatud:

  • Excel 2003
  • Access 2003

  When I install a package, it's the work of weel but when I try to install the second, I got this error message:

  
  

  A version identical or newer Microsoft Office Access 2003 (VMware ThinApp) is already installed

  
  

  Can you help me please ?

  Miluge

  The reason for the same GUID (MSIPackagecode, MSIUpgradecode) is the capture of the individual components of a single configuration. In your case, you could have captured Access 2003 and Excel 2003 in a single Office 2003 configuration. Thus, ThinApp share the same GUID of the original configuration.

  To resolve this issue, follow these steps:

  1. open one of the package.ini and uncomment the code MSIProductCode and MSIUpgrade (by removing ';' at the beginning)

  2. change code both MSIPackagecode and MSIUpgrade for this package. You can do it by changing just a single bit in the 32-bit key.

  For example, if your GUID looks like below,

  MSIProductCode = {2DF388F8-535F-6909-DBBA-288792F19500}

  MSIUpgradeCode = {0B400927-A236-B536-B00A-8961831A298F}
  You can change the values as below. Here I changed only the last piece

  MSIProductCode = {2DF388F8-535F-6909-DBBA-288792F19501}

  MSIUpgradeCode = {0B 400927 - A236 - B536 - B00A - 8961831A 298G}

  3. rebuild the package and test it. It should work now.

• Old lock to activate ipad asking for Apple ID and password used to configure icloud, which is forgotten. Help?

  My older ipad bouchoirs activation requires Apple ID and password used to configure icloud. I think I know the ID because she tips ***@outlook.com, but not the old password. Help?

  Try https://iforgot.apple.com

  or

  Contact Apple for the Apple ID account security support

  https://support.Apple.com/en-us/HT204169

• Inject an apple ID and PW using the Configurator 2?

  Hi all

  Wondering if a id apple & PW can be added to a profile and deployment using the Configurator 2. Sorry if this has been covered, am new to this and learning and discovery I.

  see you soon,

  Kristian.

  Hello, Kristian,.

  AC2 negates the need to have a configuration of account iTunes\AppleID on each device, can I ask why you wanted to do this, there may be a better way? ipads how are you trying to install? ipad users can add their own iTunes account to download other additional applications then deployed via the configurator.

  Kind regards

  Rick

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• Differences between the Mac Pro 2009, 2010 and 2012 Logic Board

  What are the differences between the logic board in the Mac Pro 2009, 2010 and 2012? In particular, what are the differences in the logic board between the MacPro4, 1 and MacPro5, 1? When a 2009 logic board is updated to 5.1 firmware is identical to the logical tips 2010 and 2012? Updated to 5.1, what is happening with the SMC firmware?

  Answers in-depth in this type of broad would be book-length responses.

  Where are you going with this?

• There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment

  There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment

  There are no withdrawal, must be replaced and released.

• LabVIEW 6.1 and 2012 at the same computer problem

  Hello world.

  I've been using Labview 6.1 for a while and it worked fine for me.

  I recently installed Labview 2012 on the same computer and looks like the serial port of functions do not work properly. Whenever I try to open an example of VISA communication, labview freezes.

  I guess it's because even though I can install two versions of labview in the same computer, the drivers can be installed once correct?

  But I thought that labview 6.1 and 2012 may share the same VISA driver.

  Is there a way I can resolve this problem with versions of labview works correctly?

  Thanks in advanc.

  The LabVIEW and VISA compatibility chart is here. As you can see, there is no version of NI-VISA which is compatible with the two 2012 and your old 6.1. Indeed, the graphic poster not only any version of older than 7.1.1 LabvIEW.

• Need space for the test environment for windows server 2003 and sharepoint 2010 online

  Hello

  We are currently running in the locked-down environment and looking for an online service that would allow us to put in place about 4 servers Hyper-V or VM (2003) and implementation of SharePoint 2010 and SQL Server 2008 on them... Where EV may seek to purchase/rent the space for it?

  Thank you very much for your time and your answers!

  Hi Volodymyr G.

  I suggest you to search rental / purchase of space on the server.

• I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared...

  I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared for all users when you access from anywhere.  I deactivated and reactivated the snapshots and it won't come back please advise...

  Hello ErekBye,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• Cannot install KB979909 and KB979906 for Windows 2000, Windows Server 2003 and Windows XP

  Original title: Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 security update for Windows 2000, Windows Server 2003 and Windows XP x 86 __Microsoft .NET Framework 1.1 SP1 (KB979909) update for Windows 2000 and Windows XP (KB979906) __KB979909)

  I was warned, I got updates, I clicked on install

  he installed an and failed both

  I can't determine how to solve this problem, and the little shield that warns me still here says I need to update

  the explanation refers to the sp?

  IM unaware of what these elements affect

  See the RESPONSE message in this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/5dc22ff1-ba9a-4a3a-9f19-49e85908c4c9 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• reinstalled Windows Small Business Server 2003 and Intranet failed during installation

  I had to reinstall Small Business Server 2003 and I can't after setting up where Exchange, etc. are installed. It passes through Exchange perfectly and blocks on the Intranet tools on Disc 3. I use the "fixed" CD because the 3 original drive was corrupted when we bought SBS2003. Our version is the original pre-service pack 1. Is there anyway to download a disk image 3 where my disk is damaged? It seems good, no scratches, scratches or dirt.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Office 2003 and 2007 coexist in vista, but updates for 2003 do not settle

  I am running Vista family (64-bit) and have the two 2003Pro Office 2007 Pro and installed. Windows Update tries to install 4 updates to Office 2003 including service pack 3 but install still fails without an error code. Someone also told me that they don't think that Office 2003 and 2007 can coexist on my installation, is it true? I have not installed Outlook 2003 and 2007. I installed Word, Access, excel & Power point.

  Hello RICKYR,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Microsoft Office, and would be better suited to the Microsoft Office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP Setup: Netframework 2.0 SP2 on Windows server 2003 and generic process for win 32 services

  I have Windows XP. Since May 15, when I open and close my PC, the same updates seem to be installed: Netframework 2.0 SP2 on Windows server 2003 and Windows XPx86 KB2804577 and successfully installed several times per day, approximately 33 in total so far. Is it OK? How can I stop it?

  In this time (also some time before)

  When I open my PC a pop up displays: generic process for win 32 services... to allow or not allow.

  Then: I have not authorized it.

  I will allow, when he will appear again?

  and that's why the same safety NET Framework 2.0 appears again and again, when I open and close the PC?

  What should I do?

  Kirsten

  Dot Net 2.0 has an update to 'fix' his kb928365

  Also, the 2.0 is old enough, have you tried to update for .net 3.0 or 3.5

  Try this link to update 2.0, youre problems will probably end.

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=21

  Also, once installed, go to windows update...