DG watch db not giving normal report?

Similar Questions

• Weird things on the screen and the watch does not load

  can someone tell me what this means and how to fix it? Was given on the charger for hours, can not, have you tried the new wall charger and no difference

  Your watch is probably too warm. Keep it in a cool room to let it cool down. The third screen is a warning of the temperature.

  Try to load again, after that the watch is cool.  If you are using a case, keep it open.

  https://help.Apple.com/watch/#/apdcf2ff54e9

  For operating temperature requirements, see this page: Keep Apple Watch in temperatures acceptable - operation Apple Support

  Apple Watch is designed to work best with a temperature of 32 ° to 95 ° F (0 ° and 35 ° C) and must be kept between the ambient of-4 ° and 113 ° F (-20 ° to 45 ° C) temperatures.

  For example, Apple Watch should not remain unattended in direct sunlight for long periods, undergoes large changes in temperature or humidity, or be left in a car on hot days. Store and use your device outside the recommended temperature range may shorten battery life or cause other damage.

  Learn more about the management of the temperature for Apple Watch

  If necessary, Apple Watch will regulate its internal temperature. There are several things you might notice if this happens:

  • Charging time may increase, or load could stop
  • The display may dim
  • A temperature warning screen may appear
  • Data transfers could interrupt or slow down the
  • Apps could close

  If your Apple Watch has above normal temperatures:

  1. If you wear your device, turn the power off and remove it from your wrist.
     If your Apple Watch is charging, remove the charger.
  2. Move your Apple Watch to a cooler place and let it cool completely before you put it back on or to continue to load.

• Watch does not dead

  Watch does not dead

  Your Apple Watch become hot?  It will not charge if it is too hot, see this help page:

  https://help.Apple.com/watch/#/apd707b42a5e

  Temperature Apple Watch is designed to best operate in ambient temperatures between 32 ° and 95 ° F (0 ° and 35 ° C) and stored in temperatures ranging from-4 ° to 113 ° F (-20 ° to 45 ° C). Apple Watch can be damaged and life of shortened battery if stored or used outside of these temperature ranges. Do not expose the Apple Watch any major changes of temperature or moisture. If Apple Watch inner temperature exceeds normal operating temperatures (for example, in a hot car or in direct sunlight for long periods of time), you may experience the following when attempting to regulate its temperature:

  • Load maybe slow down or stop.
  • The display may dim.
  • A temperature warning screen may appear.
  • The transfer of certain data may be suspended or delayed.
  • Some applications may close.

  Important: You may not be able to use Apple Watch while the temperature warning screen appears. If Apple Watch cannot regulate its internal temperature, it passes in Hibernate mode or power reserve, until it cools. Move Apple Watch to a cooler location out of direct sun and wait a few minutes before trying to use Apple Watch again. For more information, see support.apple.com/kb/HT204508.

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  Hello

  It is not possible to disable Apple Watch when its on the charger and connected to the power supply - this is normal.

• Yahoo Messenger opens in safe mode and not in normal mode

  August 10, my flash has crashed when I was with google chrome, then all of a sudden, yahoo Messenger is wobbly. Then thought that yahoo needed to update Messenger, so I checked and of course, there was a newer version. I downloaded and that one point until yesterday if my computer went to sleep while I was connected to yahoo messenger or if I signed up I could not sign in and the purple area remains impossible to click anywhere or even move desktop. Could not only to return with a restart of the computer.  Now it doesn't open in safe mode and not in normal mode.

  I have been in contact with the support of Yahoo messenger and they gave me things to try as Messenger clear cache via the prompt commands, uninstall and reinstallation in Mode safe mode with networking, reset of IE9, check the connection, etc... Yesterday I did all these steps and this time I saw came error window "missing windows component, flash.ocx". I went to Flash via the Control Panel, and of course, my ActiveX went awol. Then I got using IE9.  Instant yahoo Messenger WORKS FINALLY! And I got the smiley face on the login window animation, BUT I can't use it in Mode without failure.  Login window won't be developed in Normal mode.  Is there something I have to toggle to open in Normal Mode?  I have this blue and yellow shield on it. I did the thing of Mr. fixit and there he had set for a few minutes, then she came back.  In the said detailed report something hidden icon got corrupted and something to rebuild the icon cache...
  -Using Windows 7 Home Premium 64-bit

  Hello

  1 are. what fixit you referring?

  2. do you get an error message when you run Yahoo messenger in normal mode?

  Method 1:

  Right click on the Yahoo messenger and select run as administrator.

  Method 2:

  Perform a clean boot and check if you are able to launch Yahoo messenger in normal mode.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  To rebuild the icon cache, refer to this link.

  Forum FAQ:How to rebuild the icon cache

• How to use an element not DB in reports

  Hi all
  I want to use a DB element not in a report to retrieve a value from the database using a part of the DB in the data model
  What should I do?
  Create a column placeholder or a formula column?
  
  
  I tried to do by creating this function:
  
  FUNCTION CHAR INF_RET(PINF_NO IN NUMBER) IS BACK
  INF_TEXT VARCHAR2 (100);
  BEGIN
  SELECT table_namr.information - information is a column of this table
  in inf_text
  from table_name
  where table_name.information = PINF_NO;
  RETURN INF_TEXT;
  END;
  
  create a placeholder column and then retrieves the value using the previuos as follows:
  
  function INFFormula returns the Char type is
  INF varchar2 (100);
  Start
  SELECT INF_RET(:information_sid) - an element DB
  IN: inf_P - it's the placeholder column
  DOUBLE;
  end;
  
  But it gives me the following error:
  "Function INF_RET cannot be used in SQL.

  Hello

  You cannot use a local function in SQL.

  Possible solutions:

  Join your Select used directly in your local function in the query (this is the best, because he needs without code and will be the best for performance).

  Create a column formula in the same group where your field: information_sid is located, in what form-function, make your selection and return the result as a result of the formula-function. Then you can use this formula column in page layout as part of the 'normal' query

• Auto unlock with Apple Watch does not

  Hello

  I followed all the instructions and advice of all Web sites without success, my watch is on my wrist, unlocked and the Mac cannot communicate with the watch, or when he's on the odd occasion that the watch is not open the Mac, I still have my password.  I have not matched and repaired the watch, and the new registered in iCloud, transfer off and on again, the watch, the 6s iPhone and watch are all connected to the same network still with no luck.  This should be an ongoing and easy process as most of the functions of apple, but it just doesn't work and it is the function that I was more enthusiastic in this upgrade of the software, feels a bit like false advertising if it's this hard to operate.  Can apple be solve this problem or can help a tech guru

  If the problem is that when you check the box "Allow your Apple Watch unlock your Mac" in security pref pane it breaks down and said that one cannot communicate with your watch?

  You have Bluetooth and Wi - Fi enabled?  If so, try to restart your Mac, iPhone and look, and check the box again.  Also sometimes if you just wait a few hours and try to check the new it will finally work.

• Unlock with Apple Watch does not

  Hello

  I'm running a MacBook Air mid-2013 with macOS Sierra, with a 2nd Gen Apple Watch watchOS3 running. I'm on the same Apple for my Air ID, see and iPhone (6 s).

  But unlock with Apple Watch does not work on my Air. I activated 2 factor authentication. I checked the box that allows to unlock with Apple Watch. Everything seems to be kosher.

  When I close and reopen my Air, "Unlock with Apple Watch" appears for about 10 seconds, and then I type my password.

  Help? Thank you!

  I also have this problem. I have 2 accounts on my Macbook. One is the first account that I don't use, second my regular account. On my Second account, it of the same problem, but with the Admin account... It works.

  I Don t know why.

  Do you use also two accounts?

• Apple Watch does not appear in the security/privacy settings my mac (2015)

  Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto

  Hi abcd_bruce,

  Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.

  Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.

  Try safe mode if your Mac does not end commissioning

  Have a good night!

• Watch will not turn on or charge

  Two days ago, I bought my watch and it worked perfectly. I left to come from overseas and I couldn't load it while on the plan so it is dead. When I'm here I plugged it in and now it is not turn on or charge. What should I do?

  Hello

  Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If this does not help, then try to charge your watch for about 2 hours, making sure that you follow the instructions from here:

  • Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  • Try restarting it (by pressing the side button until you see the Apple logo).
  • If necessary, then try force it restarts again.

  More information:

  If your Apple Watch does not load, or it lights - Apple supports

• Apple Watch: can I receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please. Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... someone kn

  I can receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please.

  Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... anyone know why? Thanks to you all!

  Hello

  To change the language for a response on your watch: Press answer > firmly press the screen > press on choose language > select Spanish.

• Apple Watch does not connect to the iPhone 6

  After updating my iPhone to IOS 9.3.3 6 all my bluetooth devices registered were gone including my Apple Watch. Now, it appears under "other devices" so I can't connect it. I already started my bluetooth and off and reset my iPhone but nothing worked. Any suggestions? Thank you.

  Hello

  Your watch is not supposed to be listed under "Other devices" on your iPhone (settings > Bluetooth), but it should be included in the section "my devices".

  To check the connection status of your watch to your iPhone, go to the eye of settings on your watch:

  • When you view the time on your watch dial, slide up from the bottom edge of the screen, then swipe left / right until you find the glance of parameters. This will specify connected or disconnected:
    • Connected and a symbol of green phone in the upper right shows that the watch is connected to your iPhone via Bluetooth.
    • Connected and a green cloud symbol indicates that your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • Disconnected shows that your watch is disconnected from your iPhone and is not connected to a Wi - Fi network. The symbol in the upper right corner will be a red telephone with a line through it. The same symbol will also see the top of the watch face.
  • Slide down again to return to the watch face.

• The watch is not, nor can it sync with reminders.

  I bought at the Apple Watch last week.  I'm back this week.  Why?  The watch is not, nor can it sync with reminders.  For me, this is the reason more and more useful to have the watch.  Without the reminders and the ability to easily sync with other devices, it is not a value of the purchase.  I am disappointed by the lack of foresight of Apple and didn't want to patch the problem with a third-party application.  It will be difficult to come back to me.

  < re-titled by host >

  Hello

  Apple recently announced reminders will be added to Apple Watch as an application integrated in the software to come, watch OS update 3, which is scheduled for release this autumn / fall.

• Avast shouws that firefox has mailwere, but I scanet it of I don't know what to do with his watch is not on other browsers don't

  Hello I have a problem: avast shouws that firefox has mailwere, but I scanet it don't I don't know what to do with his watch is not on other browsers, but I don't know haw remedy

  Year annual might try to do a full install of Mozilla.org
  Download Firefox full installation for all systems and languages {web link}