DHCP WRT160N problem

Similar Questions

• Application of Router WRT160N problem loading with LELA

  Bought router WRT160N downloaded software. everything works fine with the router. but when I tried to open LELA shortcut on my desktop, I have nothing. LELA will open in the taskbar. I went to the executable files and tried to open it y fron and nothing. I went to the Vista Task Manager and looked at my running applications, and it shows an easylink icon is labled ALERT POPUP that is running. and also the Linksys Easylink Advisor running. When I finish the task for the alert popup. I can now open with the shortcut.

  hope I have not confused.

  There is something called ALERT POPUP running in background. preventing me from opening my shortcut LELA.

  Try this McKieus

  I had exactly the same problems that you described with technical support. I found this link in a post by Basiltoo on 12/15/2008. It worked for me. Previously, I had the x 86 machine error when loading the software upgrade. I have a 64 bit system. There are still a few problems with some of the options, but most of the time it works.  The link is http://update.linksys.com/autoupdate/

  I also uninstalled LELA however add remove programs and restarted before I installed the new version. On the new version, he has a place where it asks if you have a 64 bit system. If you choose the download you receive will be correct and you should not get the 'x 86' mistake.'

  He seems also to stop correctly in this new version.

  Good luck.

  It worked for me.

  BRICS

• EA4500: DHCP reservations problems after FW v2.1.41 (Build 162351)

  Hi people...

  I liked the new FW 2.1.41 (Build 162351), BUT I'm having
  a big problem: DHCP reservations.

  With the FW 2.1.41 (Build 162351), reserves of DHCP
  does not work. I have set up the set, but after I click in a request,
  EA4500 change everything, put a few crazy IPs to my devices.
  remove certain devices etc.

  SOLVED!

  I support FW v2.0.37 and I noticed that there is no subnet mask 255.255.254.0 in options...

  Then, I put the new FW (2.1.41) and choose the 255.255.255.0 subnet...

  When I tried to make the DHCP reservations I don't have problems...

  In short:

  If I use the FW 2.1.39, I can use the subnet mask 255.255.254.0 and the

  DHCP reservations works...

  If I use the FW 2.1.41, just with the subnet mask 255.255.255.0 or

  255.255.255.128 or 255.255.255.192 which DHCP reservations works.
  

  In my view, that it is a firmware issue

  Now I'm happy.

  Thanks for all!

• EA6900 DHCP timeout problem

  This is by far the stronger and more sophisticated wireless router that I have ever used, but it has a small problem in providing wireless services on my phone.  I looked through all the settings and read all the troubleshooting assistance, and I can't find which could control the router sending a momentary power switch pulse exactly all the 60 minutes that is picked up by one of my Apps (AutomateItPro) phone...

  I have had no problem affecting this router upward, mosty plain vanilla right out of the box.  Because I use a cable broadband ISP (Charter) I use DHCP - so I don't get in other internet protocoal settings that control "Connect on Demand", etc..  Nor was I changed the default maximum, length of lease of customer value in the configuration of the router, it's always 1440 minutes (24 hours).

  This app on my phone has the value triggers a notification when I disconnect all WiFi (this router provides my WiFi at home but I have the app to the WiFi network of any) and activate the mobile data and vice versa with a different tone.  With precision every 60 minutes since I have hard reset the router (with an unplugged power cable), I get a notification of your momentary loss of WiFi follwed in 2 seconds by restoring the WiFi.  I tried a hard reset twice and it is a signal on the router, not the app, or my phone.  The problem is that this continues to happen at night when I am sleeping, and this powerful application overrides my silent nights for the phone settings, so I can still hear him.

  What is the setting that does this on the router, and it is possible to prevent him from doing this (emission of the momentary power pulse of the wireless signal)?  I haven't checked if it is a reassignment of IP addresses at this time also...  I really like this router, but being awake is a pain...  (Yes there are other solutions of circumvention of the APP, but those who are not as reliable I found like stop this problem at the source of the router if possible.)

  Thanks from a newbie!

  Hey Ronald,.

  I used to have the same problem.

  The way I fixed it changed the name of one of my networks.

  This router is dual band and has a band of 5 GHz and 2.4 GHz band.

  I had both my SSID network named the same thing with the same password.  For a reason which is that... my connection would constantly.  After changing the name and password of one of the bands I have over this problem.

  Hope that helps Ronald.

  I know it's really annoying.

• WRT54G v7 - Client DHCP list problem

  Hi all

  I have WRT54G v.7 - firmware ver.7.00.8.

  by mistake I removed the bad PC of the DHCP Client Table. / Status/LAN

  How can I restore the list adding the pc to the list, as there are only there ability to delete/remove?

  Another question,

  How many clients/PC wireless to the router can handle without a problem? ...

  I noticed that when we are in the 3 or 4 clients wireless connection is very unstable, slow response, connection drops.

  Is there anything I can do to improve this issue?

  Ty for any information,

  Frluga

  Restart your computer and it will receive a new IP address of the router.

• WRT54G v7 client DHCP WAN problem

  I recently started having a strange problem with my WRT54G. Internet access via a modem cable and has been fine for months of work, and the cable modem works fine so I suspect that the problem is with the router. However the router also works for the most part, so I thought I'd see if anyone here has any suggestions. Here are the details of the problem:

  • The WAN router configuration has been set to DHCP.
  • It is used to pick up a new IP address of the cable modem with happiness when necessary.
  • One night the router stopped to pick up an IP WAN side. (nothing has changed. I am alone in the House that goes anywhere near the router)
  • Connect the modem directly to a PC works fine (suggesting to the DHCP server on the modem is fine).
  • Copy the config IP WAN from the PC to the router, as a static IP address, also allows to operate when the modem is plugged into the router and the router to a PC (which is how it is set up now, but it's a pain to have to mess with the physical connections and reconfigure the router manually whenever the modem abandons a connection (which is another question, but not one for this forum...)).

  So both the modem and the router seems to work except for the router DHCP clients. It works well as a DHCP server for the local network.

  The firmware has been upgraded (and functional), I followed the standard procedure to turn on, I have released and renewed the IP address through the status tab in the web interface, and I tried to reset the router using the button on the unit and through the web interface to return to the default settings.

  Any suggestions?

  If you have upgraded the firmware of the Rotuer and also reset the router.

  So what you do is - to open the configuration page of the Rotuer http://192.168.1.1 and admin as the password.

  Changed the type of Internet connection to DHCP and then changed the MTU to manual and size to 1364 save settings.

  Then checked the WAN IP address if its 0.0.0.0 click the Configuration tab and then click the sub-tab address Mac Clone-check the activate click on clone Mac - then save your PC settings-check the WAN IP 0.0.0.0 if box-so == Powercycle the network way to unplug the power cable from the router and the Modem and plug it in again after 30 seconds.

  When you connect the back make sure you plug the Modem first and then the router.

  Check if you're able to online or not.

• OfficeJet 6700 DHCP causing problems with airprint and web services

  I find it kind of interesting that this printer does not properly with DHCP enabled by default and more easy to use configuration.  My new printer seems to require to manually set the ip and dns settings before the features of web services or airprint worked correctly.  It was strange because printing from a PC and iMac worked well, it was that only the web services feature (unable to connect to the server) and the airprint from IOS devices failed (printer shows up but just disappeared rather than printing impression actually).  Someone else has seen this and not do anything to solve this problem?

  The problem with this is effectively resolved through static DNS, generally. The reason it is and not with other functions, is that our print servers that connect you with are able to communicate more easily with some DNS configurations on the other.

  For this reason, HP recommends generally defining the DNS for your printer on the parameters of Google DNS: 8.8.8.8 & 8.8.4.4.

  Does that answer your question?

  Have a great day!

  

• DHCP snooping problem!

  Hello world

  I have a problem with dhcp snooping

  I have three switch, sw1 and sw2 to connect to a x 3750 as distribution switch

  My dhcp server is connect sw1 and clients connect to sw2

  I did trust the corresponding port and disable ip dhcp snooping information

  but when I configured dhcp snooping my client cannot get the ip address?

  I am grateful if someone could help me

  Did you trust ports to the DHCP server AND your circuits between switches?

• WRT160N problem

  I have everyone... I recently (3-4 month) he bought a wireless router Linksys WRT160N and since I had the wireless on my laptop is very slow... is there a setting in the router that I have to change or something... its really annoying

  Thank you

  You can try to change the channel, fragmentation and rts threshold.

  See the steps detailed here:

  http://homecommunity.Cisco.com/T5/wireless-routers/WRT160N-v3-very-slow-wireless/m-p/265327#M138914

• WRT160N problem, Cant update firmware (downgrade) PLEASE HELP!

  At this router running for a few weeks. Its got that * beep * problem connection but just today, it is even worse. Every 30 seconds or so, he will lose to the modem and internet connection for about 2 seconds. So even if I try to update my firmware up to 008 I don't get the chance. The upgrade gets about 50% of fact and then I lose internet and it fails. * beep *? Please please please help

  You must not be connected to the internet while doing an update of the firmware.  Just the computer cable connected to the router and that's it.  Try the upgrade again to 008.

• Restricting access to Internet WRT160N problem

  I use router WRT160n.

  I used the access restriction to restrict internet access for 12-05:30 every day.

  during 12-05:30 every day, when I use my laptop to access the internet by wifi, the site is blocked, and internet access is limited. This works correctly.

  However, when I connect the lan from my laptop to the router and try to access the internet, I can browse the site normally. I can browse google, yahoo and all Web sites. in this case, the access restriction cannot funciton properly.

  My question is:

  Why restricting access can work when I use the lan cable to connect to the router?

  How do I fix this so that the router can block all access to the internet, even when I use the lan cable to connect to the router?

  Thanks for your help!

  If you are using an ethernet cable, your computer uses a different MAC address and a different IP address on your local network. Basically, for the router, it looks like a completely different computer. You need to add the IP address or a MAC address restriction policy.

• Configuration/connection WRT160N problem

  I just bought the WRT160N router. I went through the installation process... connected via wired ethernet port, password and rights admin, ect., but when I try to connect to my new router via my wireless card, its going to "acquiring network address" mode for about 5 minutes and then disconnects. I get no error message, it just stops trying to connect and I get the big red X on my network icon in the taskbar. I've been reading the forums and try to help out myself, but I don't know what I can do. I know my wireless card to work, I am able to connect to my network of neighbors.

  Any information would be appreciated. Thanks in advance.

  What operating system you are using on the computer... ?

  What is the model of the wireless adapter, you use the computer... ?

  Open the router setup page and under the Wireless tab, change the channel width to 20 MHz only and up to 11 channel, provide a unique name for the SSID and click on save settings...

  In respect of wireless security, check the security key...

  Under wireless settings advanced... Change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now, on the computer, remove all the favourite network and create the profile on the computer wireless and check...

• WRT160N problem of password for beginners.

  Just bought a used router and can not access the router configuration. The default user name and the password do me not in. Is there a way to bypass this and reset the info.

  Thanks for your time.

  Hi canadaboth and welcome to the forums!

  To reset the password of the router, please press the reset button while the router is turned on for 30 seconds then turn if market. To connect to a computer via the cable to one of the router LAN ports and proceed to the configuration. Do not fill in the username and admin for the password.

• WRT54G2 DHCP Client Table empty.

  OK this thing is 4 days and worked fine until today. Wireless can connect to it. My DHCP client table is empty (does not see the same wired connections). I tried the firmware update, reset to factory settings I even unplugged it DST foer. No luck.

  Note: this was bought to replace a month 8 old WRT160N which oddly would not release someone from the DHCP client table and would regularly not people to reconnect because he thought that it was already connected. That the only solution was to go inside and remove them manually.

  I don't know what you guys done different with this generation, but you should have stayed with your old G

  Sorry I never posted back, but here is the solution.

  It worked only for the WRT54G2 and not for the WRT160N problem (Im sure this is a hardware problem).

  In any case apparently AVG default firewall (now) blocks all network discovery when it is enabled in your operating system. How and why it affected the client DHCP table i havnt yet understood.

  Solution: If your AVG version help complete (not free) goto Tools/settings system//(whatever profile your using either Standalone or Small home or office) Firewall service. Now scroll CPP of Windows service and to allow for the change. Viola everything works now. Went and did it on all my computers on the netwrk with full AVG and it works now.

• DHCP

  My WRT54G manages all routing on my network.  95 percent of computers do ip on dhcp without problem, but there are a few machines that will not receive any IP via DHCP.  If I give the IP addresses manual troubled computers they have no problems.  BUT why it does not work as it should?  Computers are both Mac and PC, connection wire and wireless.  Thank you.

  I'm a fool.  The term of the lease was set to 24 hours with 50 users max.  Default settings!  The leases were not simply be released from the router.  DOH!  I lowered the lease time of eight hours and has increased the max users in 150 and have not had any problems.  Thank you for having abandoned for assistance.