EA4500: DHCP reservations problems after FW v2.1.41 (Build 162351)

Similar Questions

• Table of DHCP reservation

  I just assigned a manual static IP on my WiFi printer and reserved in the DHCP reservation Board. Which works very well.

  The problem is, ALL the devices listed in this table, take the name of the device that is reserved, after you save the settings. Even if I change the name (something like "printer"), then all of the other devices also take this name, when I save the settings.

  Is that all that I should be concerned about? I updated the firmware (made yesterday); is there something that I can or should do about it?

  The changes take place in the 'Customer name' of the upper table column.

  IT is recommended that you set a static IP address ON the device or put a reserve ON the router, not both. I recommend that you set static on the printer as it does not need much, if any, internet management or a router. IT what I do with my 3 printers.

• EA6200 DNS / DHCP reservation

  Hello.  I recently replaced my old router with a Linksys EA6200, and I'm having a little trouble getting a local DNS is working properly.

  On my network, I like to set up DHCP reservations to make it easier to find certain machines.  For example, let's say I have a DHCP reservation for 192.168.1.101 for a machine called "bob".  DHCP seems to assign the IP address to the machine, so that part seems to work very well.  But the DNS server of the router does not have "bob."  It worked well on each other router I've owned.  Any ideas what I'm missing?

  OK, I think I knew what was going on, but I'll leave this here case that someone else has the same problem. It seems that my clients were still on my old router dhcp lease, so they had not recorded. Forcing them to renew their dhcp lease seems to correct the problem.

• WRT1900AC limits of DHCP reservation

  When you set the WRT1900AC, I want to put on 50 DHCP reservations (these are virtual machines deployed by other software that gives me known MAC addresses, but sets to get the IP address of the DHCP server and I need them to be called IP addresses for a classroom environment).

  The problem is, once you've spent 12 reservations, the button 'OK' to save is off the screen and there is no scroll bar.  I can understand the number of tabs to reach the stop button, but I know that I'll never be able to see the full list or below the most important area where is shows who is connected with what IPs currently.

  (1) this form should get fixed.

  (2) is there a way to set this up, like downloading a configuration file.  I used to do with DDWRT on my old G 52, but I am wary of jumping to DDWRT on a newer platform.  Is there another method of confururation other than the GUI?

  It is a bug. As a solution to use the zoom of the typical browser.

• EA2700 DHCP reservations

  Hello

  I have an EA2700 running the latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I can't access the link of DHCP reservations under local / network connectivity. When I click it, nothing happens. I tried several browsers including IE 10 (Windows 8 RTM), Firefox and Chrome 21 15. I also tried on a Windows 7 with IE 9 machine, and the link does not work on either except that it contains a box which says: invalid character when I click the DHCP reservations link. I don't see no invalid characters on the screen. Any solution other than the downgrading of firmware or assign a static IP on the individual PC?

  In addition, on a unrelated note, where is the configuration of Dynanic DNS on the Cloud Connect to Cisco?

  Thank you

  Maaz

  Thanks for your help. There was an update of miinor for the 1.1.38.138880 that the cloud would not pick up in the automatic updates or look for the updates, but the release notes said not much other than it was to make it easier for the firmware downgrade the firmware.

  I manually installed that one and it has not made a difference, but I found the problem. I got the name host encoded as maaz.local. Surprisingly, this is what was causing the invalid characters message when I clicked on bookings DHCP with IE 9 (with all the other browsers, I don't got no error message). When I changed the host name to just maaz, DHCP reservations link work began. Go figure!

  Maaz

• Huge problems after updateing to 31.1.2

  Hello

  I encountered several problems after the update to 31.1.2.

  1. I can't send emails from one of my accounts, or it only downloads the messages from this account. When I connect to this account's web e-mail messages are there. When I try to send the mail, I get the message:

  The message send failed.
  The message could not be sent using SMTP server mail.vista - consulting.hr for some unknown reason. Please check that your SMTP server settings are correct and try again or contact your network administrator.

  I have control over the mail server and reflected on the Messaging log and it said:

  2 Oct 17:08:37 droplet postfix/smtpd [10916]: connect from unknown [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: lost connection after unknown STARTTLS [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: disconnect from unknown [xxx.xxx.xxx.xxx]

  When I try to send mail.

  2. the update of enigmail and ligntening had stuck somhow. In the Add-ons Manager window, I see the old versions and new (lightning 2.6.3 and 3.3.1 enigmail 1.6 and 1.7.2). However, the new versions has dimmed. Restaring Thunderbrid does not help.

  3. all my entries in the missing calendar which is a very big problem for me.

  Best regards

  Andrija

  Close Thunderbird and go to your profile folder.
  There is a subfolder "extensions".
  Find the folder for both the lightning and Enigmail under "extensions" and delete them.

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• problems after the automatic updates

  I have Pavilion g7-2235dx with Windows 8.1 operating system. Almost all automatic up-to-date mess to the top of my ability to get on the internet. The only way I can connect is to uninstall all updates. The icons on my desktop has also stopped working. When I click it, it will immediately on the desktop. Cannot pin them to the taskbar either. Those on the taskbar does not open by clicking on them either. Have to click straight and say to open. Also problem get my Norton antivirus to open. Says it works but can not open it.

  Hello
  
  It might be, the upgrade to Windows 8.1. I've seen people with complications get the upgrade to go "smoothly".
  
  You can try, do a system update that would take you back to Windows 8. See if you have the same problems after updates.
  
  If you choose to update again, make sure that everything is already successfully updated.

• TFncKy.exe problem after upgrade to XP SP3 on Satellite A200

  Hello

  After upgrade of XP SP3, I have problem with TFncky.

  _System_:
  A200/PSAE7
  -XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)

  _Problem_:
  After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:

  + AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
  + ModVer: 5.1.2600.5512 Offset: 00012ace +.

  With one of the following keys on keyboard always results in above described error pop up but key are functional:
  WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.

  My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.

  As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.

  BTW:
  What driver package includes "tfncky.exe? Toshiba controls?

  Thanks in advance for any information or advice for this problem!

  Best regards
  Andreas

  Hello

  the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082

  The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.

  In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.

  See you soon

• I'm having problems after the restart with docking station, applications, etc.

  OS X: 10.11.3

  Mac Pro 2010 2 x 2, 66 GHz 6-Core

  Graphics NVIDIA Quadro 4000 card

  24 GB Ram

  50 GB of free memory

  4 additional hard disks

  Hello community,

  I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.

  Help, please.

  Lars

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.

• Re: Satellite L300 - problems after installing Windows 7

  Hello

  I have a Toshiba Satellite L300 bought with Windows Vista 32 bit about 4 months later, I got my Windows 7 64 bit done.

  1 my laptop has startup problems after I installed the drivers give him additional drivers to go, but I have downloaded drivers for Windows 7 64 bit

  2nd I hear music and want to hear the next song is what I use, but not net if the keyboard fn +? don't not go and play / pause next thank you Stop and media player tased funtionieren not only the weis tase of modest silence

  P.s. to translate with google

  Thanks in advance
  Patrick

  Hi Patrick,

  To be honest, your ad is very difficult to understand and I don t know what you mean exactly.

  According to your assignment, it seems that you need a driver and you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In regards to the FN keys you have Toshiba Value added Package, and Flash Cards Support utility. Everything can be downloaded from the official page of Toshiba.

• Satellite U400 - PSU40E Synaptics touchpad problem after the recent update to BIOS

  Toshiba welcome,

  I've tested this in reverse, this is why the statement in the subject as it looks. After upgrading the bios of 3.00 to 3.50 touchpad loses its precision. Very rude and useless its like that.

  I tried different drivers, everything, but the only way to really solve this problem was it downgrade to 3.00 OR uninstall the driver Synaptics completely. Second solution, unfortunately, is unacceptable, because then I lose some features, like click on contact, which I don't use and control.

  Best regards

  Wojtek

  Hey Buddy

  I U400 and the BIOS has been updated to the newest one.
  The touchpad works like a dream. I m using Win XP and Vista and there is NO problems after BIOS update!

  In your case, this may be only a software problem and I think you can use the Toshiba Recovery disk and could reinstall the whole OS from the Toshiba drive

  It is a really radical solution because the whole HARD disk may be formatted, but if the resettlement of these two drivers touchpad didn t help then I think this would be the last solution.

• Internet problem after upgrade to 10.11.3

  someone at face safari connection problem after the upgrade

  I'm having exactly the same problem.

  Is it possible to uninstall the 10.11.3 update and revert to the previous version?

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• iCloud problem after restore

  Hello

  I have problem after restoring my iphone 6

  1 or 2 weeks ago, I put my apple with this id * but ID not enable find my iphone, this time, my ios is 8.4.

  before that I didn't put everything on icloud my iphone apple ID 6.

  before restoring already disconnected my id not turn find my iphone

  I don't have any on my icloud iphone apple ID before the restoration, I restore my iphone after restoring my iphone need to active of the apple ID, but not my apple ID.

  the active apple ID my iphone [email protected] .it's not my apple ID, I don't have any apple with yahoo mail ID.

  Several months ago I restore my iphone with ios 8.1.2 after many months restoring at 8.4 and have no problem with icloud

  Apple please solve my problem

  Thank you.

  You bought the used phone? If so, you should contact the seller to sign out of their Apple ID.