diadem environment network list network client

Similar Questions

• Selection of the list of clients using the clause "EXISTS".

  Dear all,

  I have 3 tables, say,

  TABLE1:

   

  CUST_CODE

  (PRIMARY KEY)

  CUST_NAME

  CUST_COUNTRY_CODE

  CUST_CITY_CODE

  CUST_AREA_CODE

  A

  CUST1

  COU1

  CIT1

  A1

  B

  CUST2

  COU2

  CIT2

  A2

  C

  CUST3

  COU2

  CIT2

  A3

  D

  CUST4

  COU3

  CIT4

  A4

  E

  CUST5

  COU3

  CIT5

  A5

  TABLE2

   

  STOCK_SYS_ID

  (PRIMARY KEY)

  STOCK_CUSTOMER_CODE

  STOCK_CUSTOMER_

  COU_CODE

  STOCK_

  CUSTOMER_

  CIT_CODE

  STOCK_

  CUSTOMER_

  ARE_CODE

  STOCK_DOC_

  CREATED

  1

  A

  [Leaving empty as we have reference only to the customers and the date here...]

  10/15/2015

  2

  B

  15/09/2015

  3

  A

  16/08/2015

  4

  C

  18/08/2015

  5

  E

  22/07/2015

  6

  C

  31/01/2015

  7

  A

  15/10/2014

  TABLE 3

   

  AREA_CODE	AREA_COUNTRY_CODE	AREA_CITY_CODE
  A1

  COU1

  CIT1

  A2

  COU2

  CIT2

  A3

  COU3

  CIT2

  A4

  COU3

  CIT3

  A5

  COU4

  CIT5

  How can I find the list of clients of TABLE1, which are present in TABLE2 by 2015 and have country-city-zone, both correct mapping as specified in section TABLE3 using the clause "EXISTS".

  Is that my output will be like,

   

  CUST_CODE (ONLY CORRECT CUSTOMER CODES)

  CUST_NAME

  A

  CUST1

  B

  CUST2

  
  

  Thanks in advance,

  Séverine Suresh
  

  Hello

  So, you want to see 3 columns in table1 correspond to 3 columns in t3.  It is not enough for only 1 column equal:

  Area_Code must be equal

  country_code and must be equal

  city_code and must be equal.

  Here's a way to encode that, by using the EXISTS operator in a WHERE clause:

  SELECT cust_no, cust_name

  FROM table1 t1

  WHEN THERE IS)

  SELECT 0

  Table 3 T3

  WHERE t3.area_code = t1.cust_area_code

  AND t3.area_country_code = t1.cust_country_code

  AND t3.area_city_code = t1.cust_city_code

  )

  ;

  I hope that answers your question.

  If not, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results you want to start from these data (otherwise what you've posted already).

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• Offline of Windows on the desktop with 9.0 Network Client fails

  We noticed a problem in our environment when we went from the Flex engine to the 9.0 client who appears only with laptops Windows 7/8.1 off-line. If a laptop is connected via Ethernet to our network there is no connection to the Windows desktop problem - engine Flex draws the settings and everything is fine. Subsequently if connect you shutdown/standby/lock screen there is no problem with users logging back in their office. When the user logs out of a cold start or from a connected session not connected to the corporate network, when its connection - windows immediately connects the user to reverse. We have started the client 8.7 and does not have this problem at all.

  Anyone else noticing this? Any suggestions on what to watch?

  Hello

  I think the thing you encounter is the new feature that increases security.

  When open, no action configuration is found the user is disconnected.

  For more information, see the Administrator's guide.

  Try to install the synctool to come around this issue when this feature is required.

  Welcome,

  Pieter

• Recommendations material and tips for network client 100

  Hello

  We are currently looking at creating a wireless network separated very basic for a client in two adjacent large cabins (3 m of distance) that can support up to 100 clients max simultaneously. It will only be for entrepreneurs to access basic internet, web mail, etc. connections. There is no existing infrastructure to connect to, so let's look at an internet connection for a form, a small switch and the wireless network. Range isn't a problem because they are next to each other it's support for such an amount of connections. I thought that a cluster of 2-4 WAP321 configuration might be a little tense and we could get questions like the number of simultaneous connections gets nearly 100. I also watched a couple of standalone Aironet 1600 s, one in each cabin.

  The network itself is very basic, because it is literally just shared internet access but I need to make sure it is reliable with 100 connected clients.

  I rang pre-sales tech, but they were not mcuh help and sounded like they knew less than I, so any help would be appreciated.

  Concerning

  Harry

  Dear Harry,

  Thank you to the small community of Support Business.

  By checking on the WAP321 data sheet, I see:

  -Recommended user support-up to 32 users connective, 20 active users

  -Active clients by cluster = 80

  I agree with you when you say "could be a little tense and we could get questions like the number of simultaneous connections gets nearly 100", that's why I suggest you go for a business, a range like the Aironet1600 input device you mention.  In any case I would contact you the pre-sales team or support thread-mobility advice and a community helps further.

  Thank you for your time on this matter and please let me know if there is something I can help you with in the meantime.

  Kind regards

  Jeffrey Rodriguez S... : | :. : | :.
  Support Engineer Cisco client

  * Please rate the Post so other will know when an answer has been found.

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• Problem of external network (Client)

  Hi guys,.

  After the transfer of my "production" environment, I am facing a problem with the external network (not API).

  On my lab environment it works fine, but on the production environment something strange happens: the machine can be put into service, but sometimes he gets 'customization' Openstack, sometimes not.

  Also, when it "works", I can reach a floating IP to one machine, and it works for something like 5 seconds, then this IP stops responding.

  I noticed that my switch TRANSPORT DVS Checkup complains to the VLAN ID 0 (which is not effective in these physical network cards), I use the VLAN ID 102 as the Vlan of Transport VXLAN. Is there something else I'm missing?

  My setup is composed with:

  -1 bunch of Mgmt

  -1 bunch of nova

  -1 bunch of edge.

  They are all on the same Transport area of the NSX, and connectivity to the Openstack API and the Mgmt API now works well I put almost present on 'production' (in fact it is an internal test with some users), but this external network problem is a show-stopper for me

  Thanks for the advice, sorry to bother you with so many questions

  Ah, an offtopic question: when you release the 2.0 version? Is it going to be compatible with the 1.0 version, or I have to remove and reinstall my whole environment? (VMworld, probably?;) (P)

  Thanks again!

  Reading your post, I understand that you have 2 numbers:

  Problem with the metadata service (give the host name):

  Communication to the metadata service works like this:

  

  Can you do some tests for me.

  1 test VXLAN connectivity between the ESXi-Compute (hosting your VM of Instance OpenStack) and the edge of ESXi (hosting your logical shared edge router)

  Ping ++ netstack = vxlan x.x.x.x (to test the connectivity of your IP)

  Ping ++ netstack = vxlan d s 1570 x.x.x.x (to test the MTU on the physical fabric is 1600 or greater)

  Note: x.x.x.x is the remote IP of VXLAN ESXi @.

  If this test does not work, then your VM can speak to its default gateway correctly.

  If this test does NOT work, then it is probably a problem with the physical fabric (VLAN misconfigured or MTU misconfigured).

  2 validate connectivity VLAN between the edge of ESXi (hosting your edge of metadata) and ESXi-Mgt (hosting your LoadBalancer VIO)

  . SSH to the VIO - WHO

  . then make a SSH for balancing load-VIO ssh loadbalancer01

  . can do a ping to Metadata Edge1 ping x.x.x.x (ping should fail, BUT you should see an ARP entry for that IP @: arp - na)

  Note: You can find the Edge Mgt IP metadata @ under edition of the edge metadata_proxy_router_xxx NSX and its uplink interface checking.

  If this test does not work, your edge of metadata can talk to VIO load balancing.

  If this test does NOT work, then it's probably a problem with the Mgt ESXi and ESXi points not to the same port of Mgt group.

  Problem with the external network:

  You validate people can talk to the VM floating IP @?

  If this isn't the case, it is probably because the edge of ESXi (hosting your logical shared edge router) is not on the right VLAN.

  Dimitri

• Cannot add network clients

  Hi people,

  I hope you can help.

  I can't add clients to our network of VMWare; two Server 2003 & XP clients. I could add clients yesterday.

  But I got an isue adding VMWare tools.

  As a result, I removed my domain server... and could not be added again.

  VMWae tools is now correctly installed on the problematic machines.

  I can ping. I can update the clients using Windows updates.

  Once I get the domain name to add, he asks the name of user and password... but then it says:

  "The specified network name is no longer available.

  Thank you

  Colin

  Hi Colin,

  What vmware version do you use?

  Can you explain with details about your Setup?

  Prakash

• Available adapters for Windows network clients

  We are at the last vSphere generates for the host and vCenter. We are rebuilding our models of windows. I wanted to get a better idea on which network cards available to use (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1001805). Our old models have been set to flexible.

  These models will be for all variants of Windows 2003 and Windows 2008 (32-bit, 64-bit, R2, etc..)

  I am trying to decide if I should choose VMXNET2 or VMXNET3 for my models. I don't want to choose one that proliferates and I regret more late or have to change.

  (1) any concerns going forward with one of these.

  (2) comparing the 2, what are the benefits of each (VMXNET2 and VMXNET3)

  (3) by comparing the 2, what are the possible disadvantages foreach (VMXNET2 and VMXNET3)

  Vmxnet3 is the latest and greatest drivers. Best performance. The VMXNET3 downside is that currently you cannot enable Fault Tolerance on a virtual machine with this type of network card.

• Oracle 11g no network client machine connects.

  Oracle 11g was installed on windows server 2003.
  
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor . _
  
  We receive oracle above except when you give the following command:
  
  LSNRCTL > services oracle11g_listener
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = CBR-SRV-HPORA. CIBER-INDIA. (IN) (PORT = 1522)))
  _ The listener supports no services
  The command completed successfully.
  
  --------------------------------------------------------------
  
  
  C:\Documents and Settings\oracle > sqlplus scott/tiger@oracle11g_netservice
  
  SQL * more: Production release 11.2.0.1.0 Wed Jul 28 18:10:40 2010
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  ERROR:
  ORA-12514: TNS:listener is not currently of service requested in connect
  descriptor of
  
  --------------------------------------------------------------
  
  Please advice what could be the problem.
  
  Thank you.

  Your Lstener knows nothing about services. You must configure the dynamic record of service in your database, for example

  ALTER system set local_listener = "(DESCRIPTION = (ADDRESS =(PROTOCOL=TCP) (HOST = CBR-SRV-HPORA. CIBER-INDIA. IN) (PORT = 1522))) ';

  (for permanent fixing forget pfile or spfile)

  After the database records the address und thie services you will see the service when you ask "srvctl services oracle11g_listener.

  Kind regards
  Dojo

• List of Clients currently logged on 610N wireless

  Hello. I have forgotten some details in the manual, but where I am able to see that the clients are connected to the router?

  I know that my office is 192.168.1.100, but this does not seem to be recognized as a machine that is connected to the router.

  Is it supposed to show a list of customers, when I log in 192.168.1.1? Thank you for your time.

  Jim

  GoTo [status], then click on the [local area network] from the submenu. Then click on [DHCP Client Table].  That will show you what IPs and computers that are currently leased on the router.

• List of clients WAP200 ¿Connected?

  Hello

  Could someone tell me if it is possible to obtain information on clients connected to an AP WAP200?

  Hello David,.

  I created one in our lab and looks like theere is only one place to see a list of connected clients.

  Of course, you can check your DHCP server for leases is distributed, but they will not be identified as wireless clients.

  You can also go in the WAP200 admin page, under wireless > connection control.

  Here you select enabled for the login control (you don't have to save) and then you should be able to click on the button of the wireless client list.

  As far as I know that it lists only the MAC addresses, well with those who you might look at your DHCP server and find the IP address that was assigned to this MAC address.

  Hope that helps.

  Christopher Ebert

  Network support - Cisco Small Business Support Center Engineer

  * Please note the useful messages *.

• Can not type 'url-list' without client Anyconnect VPN setup

  Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'url-list', I can't enter.

  Here is example of Cisco:

  WebVPN
  allow outside
   list of URLS ServerList "WSHAWLAP" cifs://10.2.2.2 1
   list of URLS ServerList "FOCUS_SRV_1" https://10.2.2.3 2
   list of URLS ServerList "FOCUS_SRV_2" http://10.2.2.4 3

  Here's my ASA:

  VPNFW-70/PRI/Act(config-WebVPN) # url -?

  set up the mode commands/options:
  URL-block url-url-cache server

  My ASA has no choice of the list of URLs when you type '?

  Can anyone give me some suggestions? Thank you.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Hello

  In the 7.x code all customizations without client was included in the running configuration.
  However, referring to this document from cisco:- http://goo.gl/XRkrcO, you can see that this command has been deprecated in 8.X ASA codes.

  The best way to configure the bookmarks will use the ASDM or create them on a server and then bring import them to ASA.

  Why we can not create bookmarks CLI?

  With the introduction of 8.x many more options have been added, allowing greater flexibility.  These new options would make the running configuration passes, so they were moved into separate xml files.  Indeed, it eliminated the ability to configure a list of bookmark via the CLI.

  For more information on this discussion, please refer to this thread: -.
  https://supportforums.Cisco.com/discussion/11010546/how-do-i-create-URL-bookmark-WebVPN-Portal-CLI

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• By BusinessCatalyst price list Login (client)

  Hello

  Is it possible to have a set of prices for all items by customer? While 80% of our items have a reduction in the commune, 20% are customer-specific rates.

  J

  Other then the discount codes and vouchers you have ONLY two other features.

  1. high prices by product and by anyone who scored as a wholesaler to receive.

  2. the percentage of discount per catalog. If a product is in this catalogue or several TI will give the right to delivery of the currently viewed catalog.

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.

• How to install the Client of Microsoft Networks?

  When I click on install, I select the customer, click on add, but then nothing new in the Network Client area to select.  I do not have a disk to insert and I tried a system restore.

  Hello

  What exactly are you trying to do?

  The option to add the Client of Microsoft Networks will be shown only if it is not already installed. Check whether or not the item is listed in the properties of network devices.