Dial an FXS extension collection

It is possible to pick up a call in a phone extension FXS IP?

Yes, you can search for "College codes."

Tags: Cisco Support

Similar Questions

  • I have an extensive collection of emails on a bill that I want to transfer to a USB key.

    Is it possible to copy a collection of emails I have in a legal folder to a USB key?

    Firefox has no features of email, any email accessible via Firefox will be a web-based email service. You will need to check with the support for the messaging service see if they have the ability to copy emails on your computer/USB.

    It may require using a program e-mail and via the POP3 access service to download emails from the web based e-mail service.

  • CME: assign extension sip trunk

    Hello

    Instead of using a prefix to use a separate sip trunk, I would like an IP phone to use a separate sip for its 2nd line trunk.

    Then I set up a 2nd line on an IP phone to use extention 96:

    ePhone 1
    Mac address *.
    name *.
    button 2:96

    ePhone-dn 96 double line
    Number of 432

    and then I would this extension (with the number ending in 432) always use a SIP server.

    I think I need a dial-peer to achieve this, similar to:

    Dial-peer voice voip 432
    destination-model?
    codec voice-class 1
    voice-class sip dtmf-relay rtp - nte force
    session protocol sipv2
    session target sip-Server
    DTMF-relay rtp - nte
    No vad

    How can I join the dial-peer name extension? (for analog, I would put "monitor trunk 1 * voice port number *"on the name extension ").

    Any help appreciated,

    Jonathan

    Hello.

    You can try with answer address under your dial-position 432 432.

    HTH

    Concerning

    Carlo

  • Dial a mailbox of the unit directly

    I did some research to see if I can find an answer to this question and as to date, I have not so I'm posting it here.

    Is it possible for someone to dial directly to a mailbox of the subscriber unit. For example, on our current voicemail system (Coral Message Center) If a user dials 1 and extension (ex: 12348) it leads directly to the mailbox of the user to leave a message. Is it possible to do this with the unit and if so, how. Thanks in advance.

    Josh

    It's better when they integrate under a dial on the phone system plan. For example, here's a technical tip for MAC that allows you to configure exactly what you describe (using the tip of the tech * as the first digit, but it could easily be replaced by a 1).

    http://www.Cisco.com/en/us/products/SW/voicesw/ps556/products_tech_note09186a00800dea82.shtml

    In addition, from within the calling unit can go directly to a subscriber of wishes by calling the #2.

    Kind regards

    Eric

  • Creation and collection display

    I'm new in APEX.

    I add on the page processes: "on the charge before the header:

    apex_collection.create_or_truncate_collection
    (p_collection_name = > 'ORDER_MAIN');

    (With SQL Developer) do query:

    Select *.
    of APEX_COLLECTIONS

    result - 0 selected lines

    Who is wrong? The collection is not created?

    To view the collection create a select sql with your query report on the collection. Extensive collection is limited to the session. You can also view the collection by using the following steps.

    Run the Page
    Click the session menu on the developer tools toolbar
    SELECT the view drop-down list collections
    Click OK.

    Thank you
    Manish

  • I can't find a folder of bookmarks, it's buried somewhere.

    Somehow I accidentally moved a file to somewhere else in my extensive collection of bookmarks, probable as a subfolder of a folder that is not apparent. When I view the bookmarks, and then type the name of the folder, it displays all the bookmarks in that folder. If I click on "edit this bookmark" on one of bookmarks, it will show this folder... BUT... it won't show me WHERE this folder is located. I have been manually through the many records much research of this issue, but can't find it so far. Is there an easy way to search for a special bookmarks folder?

    You can install one of the following extensions

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You must update some plug-ins:

  • Music 'Fly' by Apple

    So I update with each new version of iTunes my music disappears! When I started using iTunes I laboriously put my extensive collection of CD CD to CD in iTunes while I have the convenience of my music on my iPod and then successively iPhones and iPads bought later. Apple now wants to subscribe (more money) to their most recent project of Apple's music. I have NO need of it because all my music WAS on my computer. If the questions are

    1. where all the CD disappeared to (in iTunes)?

    2. How do I return?

    I can answer No. 2 because I did save EVERYTHING Time machine

    Everyone knows this?

    Please can anyone advise me how I can get back iTunes music from time Machine?

    Thank you friends

    Rick

    iMac, OS X Yosemite (10.10.1), iPad, Macbook Air, iPhone 6 + watch

    Open a window in the Finder/Music/iTunes.

    Open the Time Machine.

    Select the date you want to restore, and then restore the iTunes folder.

  • Sansa 8Gig shows only 131 artists over 150

    I have an extensive collection of CDs and Mp3 files which I converted to WMA 65kbs to put on my Sansa fuze 8gig. I also added an external 8gig micro SD card for it that I'm in serious need to organize all the music that I have so I could listen to what it is in the yard, in the garage or the car. My car stereo and the House has the connections and everything works well! Have you noticed this forum most others are more concerned to other problems that are not with the music. My problem is that I have everything well organized as well 8 internal and external 8. Folders with names of artists and albums on the inside. Everything was going perfectly until what I came across 131 artist names now, I am being cut from all the rest! Shows well on the computer but Sansa Fuze doesn't show the rest of the artists and is very discouraging because I spent nearly $200 to get all my music organized and easily accessible. I've updated the firmware yesterday. I spent almost 2 weeks to get about 90% of my music loaded when I now discover this problem of all the artists is not displayed. Have been through the unknown artist bit and fixed it. Everything is well marked and organized. 11 concerts of music on this device, I believe is only show approximately 8. Most of those who are not display are on the external hard drive. Also have formatted, rebooted and still the same response from only 131 total artists appear. If anyone has an idea what do really appreciate it. Also sent technical support with SANSA. Am hoping to get help and will know more, just in case there's someone else also strange that I have bought this thing for music only!

    Between internal and external 5 076 Yes have surpased this limit of 4 000 song. Guess I was a fool to buy this device to store my entire music collection. Guess should worry more about silly as pod casts and other crap! Bent on again on this case! Thanks for answering my question so quickly. Assumed that SANSA technicians figure once you buy the thing HA HA ur stuck with it like it or leave it, because they never answered me. Take care guess that will have to do some research to find one of those things that is not a USELESS TOY that will do what I need it to do. Guess the jokes on me for $150! Will be the last SANSA I will never be clean!

  • Messaging with Nortel PBX unit

    I am currently under a double integration in my transition to IP telephony. In my current sitiation, we run a Nortel Meridian 1 Option 81C PBX as well as Cisco CallManager 4.0. They are both integrated with Cisco Unity 4.0. Our problem is that our IP phones are able to dial * then the extension and leave a message without ringing the phone. PBX users, however, are not able to do. This becomes a growing problem that we're driving on the conversion of the voicemail. A local Cisco engineer hold me it is possible to install it for the for the PBX numbering plan, but opposed our PBX technician. Can anyone send me an example of how to get this feature for all phones. Thanks in addvance.

    Nortel phones have a similar feature with the old voicemail system? Or users see this as a new feature that comes with the migration? On the side of CCM unit, it's really a feature of the telephone system. Unit is not something special for her. From the point of view of unity, calls by * [ext] exactly the same as a call that has been transferred [ext].

    If you can't similar functionality of a Nortel PBX, then here is the closest thing I can think of... define a driver that allows users of PBX to call in the greeting of the opening of the unit (instead of the sign - in conversation). From there they compose [ext] #2. This will take them directly to the greeting [Ext.] without ringing the phone.

    -Eric

  • Increased support of Type of object in Data Modeler

    Hello

    It is a matter primarily for the development team to shape data as well as the Group of tools. First of all, the production of Data Modeler 3.0 version is very nice and improvements in data types on which was in EA1 are large. Thanks for adding to the support of the domain to the definition, attributes and parameters for methods which makes life much simpler and opens the door to a range more wide object type modelling and ease of implementations because consistency can now be maintained much easier through areas. Support for the smoothing of lines is also impressive. It is the best app that I've seen, even better than what we had in the Design Editor in the Oracle Designer, Bravo still once the team which built the diagrammer interfaces.

    My question is, going forward will be Data Modeler has continued to be improved to fully support the Oracle objects and object relational (OR) model? I ask this question because as users of Oracle RDBMS, we do not have a tool that allows to fully model and implement the functionality provided by the server group in the field of object-relational features. Oracle Designer had a capacity of modeling of GOLD, but the end of the product life has stopped any further development. One of the common excuses is there is no request for the market for object - relational modeling. I would say, that the absence of the market demand for object - relational applications is because we have never had a tool that fully supports the relational Oracle - model object. Nor do we have a development tool that allows us to implement a fully developed relational Oracle - model object. The Tools group stopped the development of Oracle Forms support for nested objects and collections. The LOV REF columns feature is quite impressive, but we are unable to get nested collections, still less a nested collection of REFs.

    So as a member of the end user community, we are stuck in this Catch 22. The server group continues to support and improve the object - model relationship, but the tools and modelling groups have not kept with the tools to model or to implement the features and the features supported by the database. As a result, we have a partially constructed set of tools that allows you to scratch the surface of the object - model relationship, but is not able to take full advantage of the powerful features of legacy, legacy and extensive collections, the ability to inherit and extend methods, etc...

    The object - relational model introduced with Oracle8, 10g solved the problem of evolution of type which has made the implementation of the production of realistic objects. My question is; Data Modeler is finally going to fully support the relational Oracle - model object? If until the end user community, we finally get a tool that totally supported the model of GOLD, finally, we will be able to model, generate and deploy applications that will in turn create this market demand which is lacking for the relational model object.

    Thanks in advance,
    ACE

    Hi Ace,

    Thanks for the good words.

    will be the Data Modeler has continued to be improved to fully support the Oracle objects and object relational (OR) model?

    Short time - Yes. What do you want Besides lack of support now nested columns (and related to these constraints, including the PK constraint) and the generation of the 'Alter Instructions?

    Philippe

  • Creating ports FXS to using Extensions on the SPA3102 and PAP2T

    Dear all

    We have a CISCO SPA3102 and a Cisco PAP2T adapter available at two of our branches. The two branches are connected via LAN. Need to configure the FXS ports on two branches to work as extensions on IP. Kindly let me know if this could use these devices or to buy the new device and how we can create plans of numbering on both devices. Reference diagram. I don't have a lot of experince work with VOIP so your support devices will be very useful.

    Concerning

    Muhammad

    You can configure direct ip, calls between the two adapters.

    The diagram shows the SPA3102 ip address is 20.20.20.5 and the PAP2T ip address is 20.20.20.10.

    I would setup the SPA3102 with a username of 2001 and the PAP2T with a username of 2002.

    When you pick up the phone attached, a dial plan of (<>[email protected]/ * /: 5060 > S0) on the SPA3102 should call line PAP2T configured with Sip Port 5060.

    When you pick up the phone attached, a dial plan of (<>[email protected]/ * /: 5060 > S0) on the PAP2T must call the SPA3102 line 1 configured with Sip Port 5060.

    I would like to change the port numbers sip on each adapter by default 5060 to something else, but that is not a requirement.

    On each line adapter configuration you need to set enable component IP: Yes, call without Reg: Yes, and call without Reg: Yes. NAT Mapping Enable must be not on each card.

  • How to dial an extension when in a call

    I dialed a number.  I'm listening to the guests, but I know one extension. How do I compose it?

    Select keyboard during a call enter the extension number.

  • How to dial by Extension? IPCC Express 5

    Hello

    I see an example of the dial by extension in the aa.aef file that was installed but it doesn't seem to work, someone at - it script to dial by extension? I have one that works, but if the extension is not valid it just hangs up.

    Thanks,

    Chuck

    Chuck,

    Andy is the best aid to the industry. If it gets busy here is what I can offer:

    My modified script that you can use is attached.

    Please rate if this helps.

    Thank you

    Barnes.

  • In the face of "the device associated with this extension or the dial number is not valid" when you use DX80 telepresense phones

    Hi team,

    We have EX and DX series telepresence as endpoints agent. But DX series phones are facing issue "the device associated with this extension or the dial number is not valid" when checking in the agent. EX works very well. Both phones are properly recorded in CUCM.

    Can you please help me out here to solve the problem.

    Thanks in advance,

    Sisi.

    In my case, we tried to do a few different modifications here and there on the DX650 but never managed to do work.  Randomly, I was able to connect to the fineness with the DX650 as my camera, then my colleague could not connect to the Finesse with his 9971 as his camera - (keep in mind this was in an environment of model and it was just her and me as agents).  Since I saw this strange behavior and doesn't do not sense, we rebooted the server CCX. Once she is back to the top, we were also well able to connect successfully and had not had the problem since.

    Thank you

    EK

  • No vCenter information Operations Manager of an extension of the "intellectual property" has been collected in a vCenter Server

    Hello

    I just started with a clean install of the vCloud 3.4 meter use.

    The first two collections is fine but now it is defective for vCenter Operations Manager.

    We are still using the operations manager, so it is not necessary to be removed doe to use count see the version of vCOPS (5.8.4.2199700.

    Capture.JPG

    Get the following mail:
    Object:

    Hour meter collection usage, errors

    Body:

    Metering: start time (IP): 2015-11-04 12:00

    Duration: 9 seconds

    No vCenter info Operations Manager extension for "vCOPS IP" was taken to a vCenter Server.

    .

    Hi all

    Has had a call with VMware Support and the development of consumption measuring team. This is a bug in version 3.4, and there is a solution for this.

    The workaround is to use the user SSO ([email protected]) to connect to vCenter Server to the extent of consumption.

    Concerning

    Jean

Maybe you are looking for