Dialog file save forgets the last record of consultation: (Windows XP)
I discovered later that the problem was caused by the objective document Management System, and it is part of their intended design 'big brother' to allows you to use their document management system to save the files. I was very pleased with him removing my system, which restored a normal behavior of the Save dialog window.
Tags: Windows
Similar Questions
-
Properties of the file - Date of the last recorded
Hello.
I'm having trouble understanding the properties of the file, as "Last record Date" (DLS) and "Date modified" (MD).
I asked that the last of them, MD, has been changed whenever the content has changed. But Distribution lists must be updated also.
However, I have a file which has the DLS on 2007 and MD 2014 and the 'last impression"also is 2014.
How is that possible?
What has changed the date the content of the file was really the last?
I would be grateful if someone could help me understand this.
Thank you,
Nuno Roque
Modification date is when the file got changed on that hard drive. Even if you have never opened the file, just drag-and - drop it to drive flash (for an example) would last updated date change, because the file on this disk changed really.
Properties such as "Date of last recorded" and "date printed" are stored in the file itself, such as metadata and are updated no not by disk or operating system, but by the design (such as Word) program.
-
I run the Windows Image backup to a hard drive external on a weekly schedule. The result shows on the hard drive as "WindowsImageBackup\(User name)-PC\Backup (date) (number)"-currently about 80 GB (binary).
I reserve about 135 GB of available space for backups of the system, so I save only the last backup of the system.
So far, I have no problem with that.
However, the disk hard, there is another folder '(USER NAME)-PC' & under which is a folder "backup of files (date) (number)" for each time that the backup system runs.
These files vary considerably in size - for example, 1 GB, 12 GB, 22 GB. They delete or replace automatically - just, they accumulate.
What I want to know is ~.
What is the purpose\importance of these additional files?
Since I only have a single saved backup, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?
Original title: Windows Image backup
Hello
Thanks for the reply.
File '(Computer name)-PC "contains the files necessary for the Windows. Data files saved in libraries, on the desktop, and if the Windows folders for all people with a user account on the computer are also recorded.
[The default Windows folders include AppData, Contacts, desktop, downloads, Favorites, links, saved parties and searches.]
The size of these files increases, because the content of the folders mentioned above increases.
For more information, see the article mentioned below:
How Windows selects the files to back up?
http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up
I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
Thank you
-
Format the first and the last record of query result
Hello
I have the following query
< tt > select 1 seq, "This is the first record" data from dual union of all the
Select 2, 'Data ' | tNom tab Union all
Select 3, "It was last last record" double
order by 1 < /tt >
When I have the coil this summary to a listfile with col seq noprint option I get:
This is the first record
Data MLA_ACCESS_LIST
Data MLA_APPLICATIONS
Data MLA_VPD_PCK
Data MLA_VPD_TABLES
It was the last last record
But I want to:
It's first record MLA_ACCESS_LIST
Data MLA_APPLICATIONS
Data MLA_VPD_PCK
MLA_VPD_TABLES it was save finally last record
I tried with 1 statement with the use of lead and lag, because first and last record stand the other result record. But I get ORA-30484: lack of specification of the window for this function
Is this possible with 1 statement or am I've sentenced to modify the results by myself?
Thank you AukeSelect row_number() case above (tNom control)
When 1 then 'it's the first record
end | tNom |
-case row_number() over (order by desc tNom)
When 1 then 'it was the last record. "
end
tab
order by tNomHTH
-
Select the last record of each month
Hello
to select the last docnumber and qty of every month
Structure
Name Null? Type
------------------------------- -------- ----
PRODUCTCODE NUMBER
NUMBER NUMBER
DATE OF PLANFORMONTH
NUMBER OF CLEXPECTEDQTY
NUMBER OF CLCONFIRMQTY
NUMBER OF CLFGBUFFERQTY
NUMBER OF CLTOTPRINTBUFFER
in this select query if I take the sum he required all records where, as I want the last record of each month
SELECT productcode docnumber MAX (Number), planformonth, SUM (clexpectedqty) clexpectedqty (planformonth) MAX.
SUM (clconfirmqty) clconfirmqty, SUM (clfgbufferqty) clfgbufferqty, cltotprintbuffer OF FGSALESPLAN of the SUM (cltotprintbuffer)
GROUP BY productcode, (planformonth)
Sandy
Hello
Thanks its working now the code is written as below:
SELECT * FROM
(SELECT
e.*,
ROW_NUMBER() OVER (partition by PRODUCTCODE by DOCNUMBER DESC order) r
Of
E FGSALESPLAN)
WHERE r = 1 AND
entryvalid = 'Y '.
order by Number
Sandy
-
Add a string to the last record
Hello
I was just trying to format an o/p to a table, and looking at the result, I thought it would be nice to add a piece of a chain to the last record. For example
with dat as ( select 'First Record' as COL from DUAL union all select 'Second Record' from DUAL union all select 'Third Record' from DUAL union all select 'Nth Record' from DUAL ) select * from dat o/p Desired o/p COL COL ------------- ------------- first RECORD first RECORD second RECORD second RECORD THIRD RECORD THIRD RECORD NTH RECORD This is the last record NTH RECORD
with dat as ( select 'First Record' as COL from DUAL union all select 'Second Record' from DUAL union all select 'Third Record' from DUAL union all select 'Nth Record' from DUAL ), ord as ( select count(*) rn from dat ) select decode(rownum, rn, 'This is Last Record ' || col, col) from ord, dat;
-
remove the last record from the plsql table
Under certain conditions, I need to remove the last record from i_CustomerLoopTYPE r_LOOPElement IS RECORD (TermID NUMBER ); TYPE t_LOOPType IS TABLE OF r_LOOPElement INDEX BY BINARY_INTEGER; i_CustomerLoop t_LOOPType ; i_CustomerLoop(1).TermID=1; i_CustomerLoop(2).TermID=2; i_CustomerLoop(3).TermID=3;
whichi s the best way to do it. because I sometimes get duplicates for TermID in this plsql table.Hello
See [removing items from Collection (DELETE method) | http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/collections.htm#CJAFGFIG]
Kind regards
-
What is the best way to get the last record in a table?
... in addition to select * from tbl by id Desc... & then set = 1 maxrow in cfoutput.
I want a quick way.
I tried "Max (id), columns, but not worked.
If I ' Max (id) as V ' & then turn around and make another request for ' where id = #V # "to get the rest of the record, there's more action.
Quote:
Posted by: paross1
One way...SELECT all your columns
From your_table
WHERE your_engagement_appid = (SELECT MAX (your_id)
From your_table)Phil
Thank you guys. It worked great.
I also tried the front joined query where the... I would have thought that.
Thank you! -
Cursor Oracle return only the last record
I am a newbie in oracle stored proc. I tried to select data using the slider, but it only return last record. The recording must be greater than 1.
CREATE or REPLACE procedure MySchema.Test (myrefcur on sys_refcursor)
Is
Begin
declare
Cursor C1 IS
Select mySerialNum from TableA;
MyRecord C1% rowtype;
Begin
Open C1;
Loop
Fetch C1 into myrecord;
When the output C1% NotFound;
Open for Myrefcur
Select SerialNumB from TableB where SerialNumB = myrecord.mySerialNum;
End loop;
Close C1;
End;
end;
However, it only returns the last record in the list.
Original case *.
The original code is as below:
1st, I'll need to select a list of ImageSerialNum of ImageSerial
* 1 query:
Select A.ImageSerialNum from ImageSerial A, ProductionOrder B, Bom C
Where A.ProductionOrderID = B.ProductionOrderID And B.Assembly_Num = C.Model_Num and
B.Revision = C.Revision And B.EngRevision = C.EngRevision and
C.Bom_ID = passInVariable* and C.FactoryID = "7"
2nd, I'll need to check the process of EACH series with the code below:
* Low code a return process for 1 series only.
Select t.processid, t.processname, t.assembly_num, t.revision, t.engrevision of
(Select p.ProcessID, p.ProcessName, in. Assembly_Num, in. review, in. EngRevision, im.imageserialnum
Process p, Routesequence rs, Imageserial im, ProductionOrder in.
Where im. ImageserialNum = SerialNum* and p.ProcessID = rs. ProcessID
And rs. RouteID = in. RouteID and rs. SequenceID = im. NextRouteSequence
And in. ProductionOrderID = im. ProductionOrderID AND IM. STATUS OF '0'
UNION
SELECT A.REWORKROUTEID AS PROCESSID PROCESSNAME AS B.ROUTENAME, C.ASSEMBLY_NUM, C.REVISION, C.ENGREVISION, a.imageserialnum
OF IMAGESERIAL A, B OF ROAD, PRODUCTIONORDER C
WHERE A.REWORKROUTEID = B.ROUTEID AND A.IMAGESERIALNUM = SerialNum*.
AND A.PRODUCTIONORDERID = C.PRODUCTIONORDERID and a.status = '0') t
After that, I would like to combine the two in 1 stored proc code.in this case, you just want to join the two applications to use in the FROM clause
As I don't have your tables, I created two tables, each representing the results of your queries. Substitute the names of table with your queriesSQL> drop table master 2 / Table dropped. SQL> drop table details 2 / Table dropped. SQL> SQL> create table master 2 (ImageSerialNum varchar2(25)); Table created. SQL> SQL> SQL> insert into master values ('Serial1'); 1 row created. SQL> insert into master values ('Serial2'); 1 row created. SQL> insert into master values ('Serial3'); 1 row created. SQL> insert into master values ('Serial4'); 1 row created. SQL> insert into master values ('Serial5'); 1 row created. SQL> SQL> create table details 2 (ImageSerialNum varchar2(25) 3 ,ProcessID number 4 ,ProcessName varchar2(25) 5 ); Table created. SQL> SQL> insert into details values ('Serial1', 1, 'Process1'); 1 row created. SQL> insert into details values ('Serial3', 3, 'Process3'); 1 row created. SQL> insert into details values ('Serial5', 5, 'Process5'); 1 row created. SQL> SQL> select m.imageserialnum 2 , d.processid 3 , d.processname 4 from master m 5 left outer 6 join details d 7 on (m.imageSerialnum = d.imageserialnum) 8 order by m.imageserialnum 9 / IMAGESERIALNUM PROCESSID PROCESSNAME ------------------------- ---------- ------------------------- Serial1 1 Process1 Serial2 Serial3 3 Process3 Serial4 Serial5 5 Process5
your query will be something like
select m.imageserialnum , d.processid , d.processname from (
) m left outer join ( -
Identify the last record of node
Hello everyone,
another day, another problem.
We want to display a list of commands not as multiple lines but as single line, each value divided by a comma:
<? for-each: BM_AUFTRAEGE_ROW? > <? KRA_AUFTRAG_NUMMER? >, <? end foreach? >
My concern is how to remove the last comma in this line? Can I calculate if it is the last recording of an if statement?
Regrads,
Stefan DaseTo do this
= ,
-
Will be able to choose only the last the last row in a window/desktop icon in Windows 7
I use my laptop with Windows. Recently I could not open the icons/files you want in the Office of a window.
I may be able to choose only the last the last row in a window/desktop icon in Windows 7.Although double-clicking on an icon only the last icon in the window opens. Pls help me...Hi Peter,.
1 when was the last time that the desktop icons worked?
2. you have any security program installed on the computer?
3. don't you face any performance issues on the computer?
4 did you a recent software or changes to the material on the computer?
Method 1:
I would say allowing you to run the FIXIT from the link provided and check.
Difficulty of broken desktop shortcuts and common system maintenance tasks
http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
Method 2:
If the problem persists, you can also run the Scanner security Microsoft and check all infections.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.
Method 3:
I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.
Click on the link mentioned below for further guidance on the scanning of the file system Checker
http://support.Microsoft.com/kb/929833
Hope this helps and let us know if you need more assistance. We will be happy to help you.
-
Upgrades - during the procedure, my PC says it is install updates - but after having done this, she does not restart and I need to go to restart from the last successful to get windows to restart - ideas?
Windows Update Forum:
It's updated operating system Vista, upgraded installation and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
XP does not remember the last record in the file
I ran a microsoft utility to repair a registry problem under xp. now none of my programs don't forget the record '' last saved as. '' Each always default record on the desktop. Where in the registry may I to address?
It is specific about where you want to save your program files. It is not the same for all programs.
Use this program called TweakUI and change settings.
See also:
http://forums.techguy.org/Windows-XP/912279-solved-how-do-i-change.html
-
sqlldr question - how can we ignore the last record of a file when loading?
I use sqlldr to automate the loading of a file into a temporary table. I a = 1 skip to ignore the header record, but the file also contains a record of trailer that I also want to jump. Additional recording begins with a T0, but I don't know the number of records before loading.Since you said that tail record begins with SO you can use this:
DOWNLOAD THE DATA
INFILE 'fichier.dat' BADFILE, DISCARDFILE «file.dis» ' file.bad'
ADD
IN THE TABLE table_name
WHEN (01)! = ' T '
(
column names);I used! = as the other is not equal to (lower, upper) symbol does not work here
-
jump the last record loading using external table
Hi gentlemen,
I have a requirement to load data from text file of oracle database by using the external table. I need to remove the header records and complementary.
I can use the skip option to remove the header, IE front-line.
Is it possible to remove the additional record (IE last line) using the external table.
Thanks in advance.
FerryHello ferry.
Do not hesitate on occasion as useful and Correct answers for those of us Newbie trying to get credibility :)Thank you
Luke
Maybe you are looking for
-
How can I factory reset my mac computer
How do my desktop mac factory reset computer?
-
Plugged in, does not support
Hello! Recently, my adapter burned due to exposure to water. Anyway, I contacted the Hp parts store and ordered the replacement of the card. However, when I plugged it in it shows that he is in charge then he suddenly stops and it says (sector, do no
-
Satellite L350 - 12 c - hard drive failure, need recovery
Help, please. I have Toshiba Satellite L350 - 12 c and it s a German model. My hard drive has failed.The local repair center Toshiba says they can replace the hard drive, but without the disc they can t restore in working condition.Worse, it is its s
-
HP Envy 4500: Instant ink cartridge problem
I just registered to instant ink HP. All new Instant cartridges have been installed on January 28, 2015, I printed just 2 pages. I turned on at the time of the printer and the message on the screen says: I followed by using the line, contacted HP cat
-
My sleekbook will not play music with cover closed!
Hello, I just bought a sleekbook (amd model) and I have it configured on the computer that he didn't go to sleep when I close the lid, so I can listen to music while I was walking around, but for some reason some after a few seconds of it being close