Did not function: OA.jsp?

Similar Questions

• Satellite P50t-did not functions - no power

  Hello

  I have a Toshiba satellite P50t-a.
  I used it normally, and I left it for 1-2 hours.

  When I came back, the power light on the front of the base was on, a d the charge light was on, but the screen was turned off and the ring around the power button was not lit as usual.

  I unplugged it, and the charging light remained on / is always on, and the power led.
  I tried: hold the power button, leaving him alone for an hour, CTRL-ALT-DEL and opening and closing the lid.
  The reference is PSPMHA-0DP04S.

  Pictures: http://imgur.com/kRSGQwm

  Thanks in advance,
  Mr. Dave

  Hello

  At the bottom of the unit there is a 'hole' to force shutdown.
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  Please check if using this hole allows you to reset the unit.

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• Functions declared are "lost" if I did not "commit"?

  Functions declared are "lost" if I did not "commit"?

  When you issue a DDL command (for example: create...), and if the syntax is correct, it will not be lost.

  concerning
  Romain Rolland

• moving data from Thunderbird to a new computer did not work - help, please!

  I - I hope! -followed all instructions Support of Thunderbird on moving a profile from one computer to another with a different OS (save a copy of the profile of the first computer file, download and install TB on the new computer, find the 'Profile' folder and then either paste the contents of the old profile file in the new profile file [thus overwrite the latter]) then open TB... but it didn't work.

  I then tried the same thing, but with a slightly different method: I copied the name of the new profile file, he has given the profile of the old computer file, then renamed the new file profile and pasted the old profile file - now with the new designation - in the new directory... which also did not work.

  I spent a few hours trying to get this to work and am almost to the point of giving up on tuberculosis as an e-mail.

  Any help would be welcome!

  Hi, Matt;

  Thank you for your continued support - I appreciate it!

  Yesterday, I downloaded the command-line tool dbx to eml unless you had kindly recommended (at http://code.google.com/p/undbx/ ), and, as I had supposed, its function is to do what OE itself can only do by email - that is, convert a .dbx .eml format - but do it by folder, records forever, which is much more elegant.

  The tool dbx to eml was very easy to download and use, and I could ask him to convert all my files at once (which is equivalent to more than 50 records and hundreds of emails). He did a great job, and I was able to identify the location of the output directory that results anywhere I wanted.

  Because the tool dbx to eml records records converted to any specified location, one can then import them into Thunderbird Thunderbird either on the same or another computer.

  I wanted to spend all my email OE to a new computer (which involves a passage from XP to Windows 7), and, in my case, it was easy to do because I have two computers connected by a network (intranet) data drives: after you convert all the OE dbx eml files, I went to my new computer to Thunderbird instance and , using the add-on for Thunderbird Import-ExportTools (https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/), I simply imported saved eml files, one at a time. It has worked flawlessly.

  In a situation in which two computers were not connected by a network, we could easily save the eml on a USB output directory and have computer of the new Thunderbird import eml from this location.

  I would also add that this dbx to eml command-line tool is supposed to also function as a current backup utility: it begs for find and convert new files later in OE, and it only will not do, but is also their corresponding folders in the original output folder, if they exist from a previous operation.

  I still have to import all my newly created on my Windows 7 Thunderbird eml files, but - so far - it seems like it should work smoothly.

  Based on the different methods I did research - and the few that I actually tried - has my reviews, so far, is that using the tool of command line without dbx-to-eml, at http://code.google.com/p/undbx/ , is the way simpler and more reliable to move files from email Outlook Express - within their corresponding e-mail folders - to Thunderbird , either the same or different computers.

  It would be nice if Mozilla could try this method for themselves, and - if they are to find it as infallible, as I - promote this as one of the first methods to use to move electronic mail Outlook Express to Thunderbird. It others will save a lot of time and frustration.

  Matt - your kind and generous support made it happen: thanks!

• Websites blocked due to security settings that I did not go to Yahoo Games

  I played Yahoo Games for years. About 3 days ago, they failed to load. When I asked about it, I saw that many other people had the same problem. So I waited. "This morning I tried to enter one of the games and got: blocked due to security settings Application. I did not set different security settings. Then something about jre expired? That is what it is?

  Please update to the latest version 25 update to Java 7.

  You can find the latest version of Java on Oracle's Web site.

  See the Platform Java > Java SE 7U25 (download JRE)

  • http://www.Oracle.com/technetwork/Java/javase/downloads/index.html
  • http://Java.com/en/download/manual.jsp
  • http://www.Oracle.com/technetwork/Java/JavaSE/7u25-Relnotes-1955741.html

• Satellite Pro L50 - A - does not function keys

  Hello

  I just bought the L50, but the function button did not work. I tried to reboot, reinstall the utilities, but it did not help.

  I couldn't find the "restart flash card" also. Can anyone help?

  Thank you!

  > I just bought the L50, but the function button didn't work

  What system do you use or what system was preinstalled on this laptop?
  As far as I know a few L50 - A Satellite Pro have been pre-installed with Win 7 and Win 8 DVD could be found in the package

  The fact is that Win 7 and Win 8 are two different systems and different Toshiba tools are needed to get the FN button work.

  Your comments would be appreciated.

• MOBILE PHONE DID NOT READ, COULD NOT EXTEND A VGA SCREEN

  1. my mobile phone with Android (Sumsung S3) did not read since this computer since I reinstalled Windows 7. I think it might need driver for usb.

  2. I couldn't extend my screen to another screen to computer via VGA, sometime, I need to read from 2 screen simutaniously or my screen of the project on the big screen, she lost this function, you kindly could find a driver for me? Thank you

  Hi guoping,.

  Thanks for your post, I will do my best to help you.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums

  First time here? Learn how to publish and more.

  Have you done all Windows updates?  You can run the HP Support Assistant to help solve the problems and update the drivers. You can also run MS Fix It for help with updates and fixing problems.

  For more help can you please give your exact model of the computer and is your windows 7, 32 or 64 bits. How can I find my model number or product number?

• I removed the nano-receiver to the USB port & back the mouse did not.

  I have 2.4 GHz Wireless Nano Mouse (model MP2375BLK) optics.  I removed the nano-receiver to the USB port & back the mouse did not.  Batteries are fine, if I remove the battery and put it back in the red light flashes once, but the mouse will not turn on.  I checked the State of the mouse in Control Panel control (devices & printers) and it indicates that the device is functioning!

  I thank God for warranties.  Just bought itOn June 3.  Summer works fine until I removed the nano-receiver of the laptop, did not work again!  Let's get back to the store.

• Reinstall Win Xp SP2 clean did not update - error 0 x 80240036 and 0 x 80244019 - any help codes please?

  I was not able to download the service pack SP3.  The update system worked OK until I did the reinstall (simply by using the hidden OEM partition system) but the XP SP2 is perfectly legitimate and as that provided with the Acer laptop.

  Because Windows XP sp2 is no longer supported by Microsoft, Windows Update will not work as long as you have already installed the sp3.

  You need to download sp3 manually and install it.

  Download sp3 here (you are a 'professional' at the moment): http://www.microsoft.com/en-us/download/details.aspx?id=24

  Read on: http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/windows-xp-sp3-read-all-prerequisites-for-a-successful-installation.aspx

  Before you start, any trial software which has been reinstalled by using the hidden partition will be not functional (because the trial period has expired a long time ago).  You MUST uninstall any software of 'security', in particular anything Norton or McAfee and then install an antivirus of your choice (you may need to connect to the Internet to install some a / v programs; if this is the case with the one you choose, make party after all the updates below are completed, but should I uninstall McAfee/Norton stuff now.).  Use the appropriate tool to uninstall:
  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331 and
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Log in as a user with "computer administrator" privileges and double-click on the downloaded file (WindowsXP-KB936929-SP3 - x 86 - ENU.exe).

  Be patient, and once installation is complete, go here and make the method of resolution 2--> support.microsoft.com/kb/943144 (if I were you, I use the instructions "Let me fix it myself" rather than "repair for me' - although this particular routine from Microsoft FixIt will probably work OK).

  Go to http://www.update.microsoft.com/ install the software required, and then click CONTINUE > select CUSTOM and scan.  Install the critical updates of security offered.

  The automatic updates to enable: http://support.microsoft.com/kb/306525

• Wireless connection failed because windows did not receive response from the access point or wireless router

  Monday Nite I downloaded a driver site HTC syn my Android Hero phone. After extracting and installing the driver in the zip file, I tried to sync with my phone which was hook up my laptop. It did not work. Interrupt the synchronization process and I tried to check my email from outlook. Found it cannot send and receive mail. Open my browser and found that it disconnected. And so, using the LAN cable, fortunately, it worked. So I wonder what is happening to my function wireless on my laptop?

  Can someone tell me what I need to do? Thank you very much.

  Hello

  Search for updated drivers and reinstall if no later by using the procedure below.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Blocks - Spooler subsystem or the display driver did not work properly

  I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

  Hello

  1 when was the last time, he did not work properly?

  2. the accident happens at random or when executing a particular task?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Check if the problem persists, if she does not follow the steps in method 2:

  Method 2:

  This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

  I also suggest you to follow the steps mentioned in the link and check.

  Do not operate the automated FIXIT. Follow the manual steps and check.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894/en-us

  (Also applies to Windows Vista)

  Method 3:

  You can also update the display drivers on the manufacturer's Web site or use the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Hope this helps and keep us informed if you need help.

• My laptop did not come with Media Player 12.

  I have a HP Pavilion DM1 and it did not come with Windows Media Player 12. Or any other media thing. He is nowhere to be seen. I tried to get a download link.

  I tried clicking on the download link for Windows K and KN, but it came up saying: "this update is not applicable to your computer. Windows Media Player 11 did nothing. Please help me. And please don't tell me to download other software media. Thank you.

  Hello JoeHopewell,

  See if you have enabled the Windows Media Player.
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and check the brand in the face of Windows Media Player.
  4 restart the computer

  You can also check to see if you have enabled Windows Media Center as well.

  Now, go to start, all programs. You must have Windows Media Player in the list of programs.

  Please let me know if it helps.

  Sincerely,

  Marilyn

• Reloading the blackBerry Z10 Z10 software stuck on logo Blackberry, continuous restart loop, did not help...

  Hello

  Here to find the solution for my beloved BlackBerry Z10 STL100-3

  One day, precisely 26 May 2016 my Z10 battery Blackberry went below 5% or something, I rushed to connect it to the charger but before doing so; It is just off. I plugged in the charger for several hours, but it went to reboot mode as he went to the course passed. It just kept flashing empty battery symbol.

  Problem: BlackBerry Z30 stuck in a reboot loop

  Comments/Details:

  1. when it is connected to the wall charger, the red LED flashes for a few seconds, the display shows "BlackBerry" name. After that,.

  a. device either goes to a restart mode, the icon reload Blackberry OS, the charging progress are shown and about 60-70% progresses he new go to the mode (flashing empty charging symbol) load

  b. or device is standing right in the mode, load with screen showing beteer empty, load, seeing to the top flashes still with the typical color of LED for empty-drained/low battery levels.

  2. keep on charging for several hours, or even overnight will not help to restart. And he remains in charge mode with b symptoms of "scenario". Start button / stop fails to start the machine and after several attempts, it flashes only 'Blackberry' on screen and again charge mode.

  3. as soon as the connection to BlackBerry device link gets detected for a few seconds. And the screen displays the name of "Blackberry", "scenario one" described above occurs. And he just repeats.

  4. that the device is detected for a few seconds, being fast enough to select the option "Reload" when Blackberry link shows that it connected returns with the message "software update has encountered an error.

  After meeting thiis reboot loops question on 26 May 2016, I searched rigorously blackbery support forums and other web pages a di a factory reset/software reload on my device. I lost all my data, but did not care as I wanted my Z10 back to life.

  Now its been 2-3 months I see my Z10 stuck in restart loop and hoping that maybe it lights up or I will be able to find the solution.

  Kindly help.

  Hi J Sanders,

  Z10 was connected to the wall charger and all the tips/advice you mentioned have been tried. He could not start device.

  Before trying the ADF, to check if battery is dead or defective; I kept it in my brother Z10. The battery was load and after a while, he turn the unit on its own.

  However, the pile of work of Z10 my brother could not initialize my camera. I guessed corrupted software connection or the battery could be a problem.

  I carefully observed battery connection ports, specifically the part that establishes the conncetion of metal tabs of the battery with the unit (given in the image http://www.gsmzone.co.uk/Blackberry-8900-Z10-Battery-Connector).

  I found one of the metal connector stuck / out partially / fits loosely / spring-movement irregulars / and is not able to communicate perfectly with the metal strips of the battery.

  I tried to solve this problem by manually removing the metal connector. After several test, I managed to do it.

  I put my battery in my Z10, he acknowledged, and red LED flashed, name BlackBerry flashed, Blakberry OS Reload icon flashed-has increased 100%, Blackberry 10 name flashed and Z10 began. Device came to operational status.

  Current operating system version is 10.3.2.2836.

  No SIM or media inserted in it.

  Charge the unit and check if all functions work fine.

• I asked this? yesterday, but did not received a response...

  I have a 8500 all in one machine, and the book don't shoot through properly which results in the image being biased about the book and, sometimes, the paper is torn.  I use a Mac and Safari.  This error has just started and I did not any changes.  I tried to run several tests (align the print heads, etc.) without success.

  I also tried to download the PrintDoctor (or whatever it's called) it came as gobbly * beep *.  Please notify.  Thank you.

  Could be a number of things...

  There are a number of Officejet Pro 8500 has in this series:

  Series Officejet Pro 8500 has

  • The printer I took showed for the MAC OS that is two updates of firmware that are recent - you could check for your printer model and operating system and see if it's the case for your configuration.  If you find that you need the updates, then you could apply those.
  • It could be 'sticky' - dirt and tiny debris can get caught on the rollers.  This will cause the printer paper stuck in the printer, even when there are no other reasons for a 'jam '.   A printer cleaning kit can help in this situation - you can find these stores in most office and you can order the printer cleaning kits online.
  • You can try to reinstall the software of full functionality for your printer.  With the rest of the steps, cleaning, verification of the software, firmware update, etc., this may solve the issue of the issue of "sticky paper.
  • The paper may be at fault - even without having changed anything - paper is not all equal.  When it comes down to it, if the paper is not 'white', bond # 24, American manufacturing, then at some point, the printer may balk.  This can happen when the printer is only less than "polluted" or ink is less than perfect.  No, it should not be so Rouxel sensitive, but it can happen.  If all this fails, try a new ream of paper as described.
  • You can try to 'reset' the printer.  In itself, it is less likely to fix anything - in conjunction with other measures, it can be useful.
  • There is a wealth of information for this type of printer to your Web site - manuals are very good and can hold a key bit of help to point you in the right direction.

  I hope this helps.