Different behavior between IE 7.0.6001.18000 and 7.0.6002.18005

Similar Questions

• Different behavior between cRIO 'Run as Startup' and debugging run

  Hello

  I have an application that does a lot of things, including playing a card NI 9213 Thermocouple, which lies on a connected to a RT cRIO target expansion chassis. The application is run on the target of RT. My problem is related to a behavioral difference between opening a connection to the channels of thermocouple in debug (by clicking on the arrow on the VI run) mode and the opening of the connection through a Build specification (by clicking Run as to start).

  During execution, the VI wrote in a text file on the hard drive of the cRIO. I enclose the text files, one of the debug mode and a Run as startup mode. I have only two thermocouples connected (ch1 and ch15). From the text file, you can see the connection opens without error in debug mode, but get an error in startup mode. I've also attached an extract showing the VI that I used for the test.

  A few notes:

  Nothing to do with the VI is changed between each type of race.

  The Build specification has the attached VI selected as startup VI, everything else is default

  Someone else out there has had a problem similar to this? I feel like the debug mode should act identically to the normal start deployment. Otherwise, what's the point?

  Thank you

  I solved the problem! Or at least worked around it by setting a different bug. This another bug happened to be the same words that were this bug, to run as a startup. I'll summarize for you:

• Observed a different behavior between Firefox and all night (on Facebook)

  I love trolling Facebook as all with much too much time on their hands. I discovered something funny going on.

  I have 2 laptops. An an XP dinosaur Firefox running (x 86 plus recent 33.0?), the other running every night. I now use every night.

  When I'm on Facebook on ol ' faithful, I want to copy/paste of emoticons (smileys) from other sites. That has always worked smoothly.

  On my x 64 on a nightly basis, Facebook seems to flow normally but the "symbols" site won't allow me to copy. Just a small black square appears when I try to select an icon.

  That's the problem. The 'broken' site contains as well, because I run every night - W8.1 and WTP, both x 64. or every night is not able to correctly interpret the site?

  http://www.piliapp.com/Facebook-symbols/

  These black boxes show if the Flash plugin is blocked (not active), in order to verify that through the Lego block on the address bar icon.

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

• Network of ESXi - different behavior when installing adapter

  Hi Experts,

  I came across a strange problem on the network adapters section:

  • I was installing the ESXi 5.5 in a standalone Machine (re-usable)
  • When installing, it showed me the error on non detected network cards and I checked the compatibility of the guide and found that it was not a supported network card.
  • Then I installed 'VMware Workstation 10' on the same machine on the host operating system
  • I have created a virtual machine and tried to install 'ESXi' inside the virtual machine [just for curiosity\
  • He installed perfactly without error / warning (s).

  My concern is 'how and why ESXi comes with two different behaviors between installation Metel naked Machine v/s install inside a virtual machine on the same physical host.

  Thanks for your response in advance and I apologize if I am not able to present the screenplay with clarity.

  -Kuldeep Singh

  Under vmware workstation, the virtualized esxi uses the virtual NIC (probably E1000) driver, which is supported.  The host operating system uses its own realtek driver.

  When you try to run ESXi on bare metal, it doesn't have a realtek driver, if it fails.

  It is a driver problem.

• Firefox buttons appear to be different sizes between computers

  I'm developing a web application, and I see the difference in behavior between instances of Firefox. My computer is running the same version as a co-worker, and yet the behavior a button seems correct on his and seems wrong on mine. I tried to reset my Firefox, and this does not solve the problem.

  I'll post what these things look like now, if I can.

  Can anyone think of a reason why the same page differently from one computer to another, with everything - well, what I think, anyway - is the same?

  is windows configured to display items to 100% in Control Panel > appearance > display?

• Different behaviors in MAX vs LabVIEW when writing the attribute IMAQdx GigE

  Hi, I'm controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx.  Apart from a few quirks with interface we are image acquisition without a lot of problems at the moment.

  However, there are one or two issues that are confusing.  In this case, it is possible to set a MAX attribute (an attribute of command that tells the device to perform the internal calibration), but when you set the attribute in LabVIEW, the error 0xBFF69010 (-1074360304) unable to create the attribute is thrown.  See the attached images.

  I check if the attribute is writable before making an entry.  It is, however, the write failed, and read the iswritable attribute and then returns false.  In MAX, I can write to this attribute with no problems.

  I have to set up/read/write in my LabVIEW code that makes MAX.  MAX writes all the attributes (based on the values in the XML file) when he opens the camera or he reads simply all the values of the camera.  When LabVIEW opens a reference camera does perform the same steps that what MAX - I'm trying to figure out what could be the difference between MAX and LabVIEW, which might be the cause of this behavior.

  Any help will be appreciated.

  AnthonV wrote:

  Hi, I'm controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx.  Apart from a few quirks with interface we are image acquisition without a lot of problems at the moment.

  However, there are one or two issues that are confusing.  In this case, it is possible to set a MAX attribute (an attribute of command that tells the device to perform the internal calibration), but when you set the attribute in LabVIEW, the error 0xBFF69010 (-1074360304) unable to create the attribute is thrown.  See the attached images.

  I check if the attribute is writable before making an entry.  It is, however, the write failed, and read the iswritable attribute and then returns false.  In MAX, I can write to this attribute with no problems.

  I have to set up/read/write in my LabVIEW code that makes MAX.  MAX writes all the attributes (based on the values in the XML file) when he opens the camera or he reads simply all the values of the camera.  When LabVIEW opens a reference camera does perform the same steps that what MAX - I'm trying to figure out what could be the difference between MAX and LabVIEW, which might be the cause of this behavior.

  Any help will be appreciated.

  Hi AnthonV,

  "Weird" is a good way to describe the Spyder3 when it comes to the GigE Vision/GenICam interface (as opposed to the Dalsa driver that communicates using custom commands via ethernet camera series)...

  The Spyder3 has many questions focused on the calendar. It is possible that the time between the opening of the camera and the setting of this function is different by MAX vs your code in LabVIEW. In addition, there are some cases where MAX will be deletes the error to display. Ignoring the error indicated vs you see the feature to take effect in both cases?

  The base between MAX and LabVIEW behavior is the same. In both cases when you open the unit all parameters are responsible for our camera file that has the registered device settings. This file is created the first time that you open the unit and are updated every time you click on save to MAX or call an API function to save the settings. In any case, I know that the Spyder3 has various questions backup/restore the settings of our camera files.

  I suggest talking with Dalsa on the issues you are experiencing. They might be able to put up with a newer firmware that addresses some of these issues (we have worked with them in the past to identify several of them).

  Eric

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• Problem event name: ServiceHang name of the Service: Image name MEANING: sens.dll Image Version: 6.0.6001.18000 Type of Service: 20 Startup Type: 2 OS Version: 6.0.6002.2.2.0.768.3 locale ID: 1033

  Hello

  I am writing to find out if I've broken hardware or software corruption...?
  In the end, after I transfer files via a cable, I'm blocking this computer to do a clean install of Windows 7.
  ___________________________________________
  Windows NT Version 6.0 Build: 6002 SP2
  Product (0x3): Vista (TM) Home Premium Windows
  Edition: HomePremium
  BuildString: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Flavor: Multiprocessor Free
  Architecture: X 86
  LCID: 1033mama
  ___________________________________________
  Description
  Service System Event Notification Service hung on starting.

  Signature of the problem
  Problem event name: ServiceHang
  Service name: SENSE
  Image name: sens.dll
  Image Version: 6.0.6001.18000
  Type of service: 20
  Startup type: 2
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem
  Version.txt
  minidump.mdmp
  ___________________________________________

  Plain talk:
  The computer works well except there anyway any internet connection.
  As in not even one toe in the door more.

  Recovery is off, so no chance to try this.
  No virus is embedded.

  What I was doing?
  I was streaming a lot of Netflix for the last two weeks...

  I like to think that I run a pretty tight ship with this machine as in its 'own' (except recovery being off)...

  Toshiba Satellite A205 - S4607

  Device Manager shows everything is working normally. It would show if the equipment was broken?

  A month ago I noticed a bulge just above F7 to F11. The highest part being F9. It is just the plastic,
  but, obviously something had warm, yet, the machine worked very. When I discovered that it was the other
  morning after and streaming aircraft are asleep... computer had been just sitting there with remnants of
  'Dead' in the browser since ignored Netflix...

  So, back at the beginning of this email:
  "broken hardware or software corruption...?
  In the end, after I transfer files via a cable, I'm crashing this computer to do a clean install of Windows 7. »
  (or am I?)

  Thank you for any constructive comments,
  Tim

  Hi T9mothy,

  Method 1
  Device Manager would show if the driver for the hardware is corrupted or damaged which can be resolved by updating or reinstalling the driver. Try the steps from the following link to resolve the problem of the internet.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2
  SFC scanner. SFC will correct if you have corrupted system files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  If you have problems with the hardware, then you need to contact the manufacturer of the computer.

• Different behavior on the eyes; layer names are correct?

  Different behavior on the eyes; scales up and down, left right behaves as expected. All layer names are correct in artificial intelligence. Where to find a solution?

  Hmm, the sent JPG seems to be broken.

  But here's a place to look: in the Panel of the puppet, with no layers selected, you should see the behavior of face in the properties panel. Twirl in the group "Handles" to see what parts of the face it found. It shows the layers that you expect to find? (ToolTips will tell you what he's looking for.) Twirl down replacements also to see the layers of flashing. Note that if it does not find a layer of Blink for a certain look, it dimensionnera the eye that you close the eye rather than go to the work of replacement blink.

• BW Images in lightroom CC different 2015 between library and develop modules

  Hello

  I have a strange problem with black and white images with different gamma between library and develop the module.

  Here is a screenshot of the library:

  

  And develop:

  

  As you can see, very black blacks lost completely all the details in the develop module.

  Anyone have an idea why?

  With sincere friendships.

  Olivier

  When Library and Develop appear differently, it is always due to a broken monitor profile.

  Test title, set monitor to sRGB profile in your computer's operating system.

  See http://www.lightroomqueen.com/articles-page/how-do-i-change-my-monitor-profile-to-check-wh ether-STI-corrupted /

  If this solves the problem, calibrate your monitor with a standard material. (which is something you should do anyway)

• Different presentation between the first page and following pages within a section

  Hello
  
  I met a requirement as follows:
  
  The report prints some information to order. Each command is a section, including the header and the lines. For a section, there may be several pages (if the number of lines is good enough). It is necessary that, on the first page of each section, it prints all order information in the header of the report and for the next page, it displays only the sequence number in the header of the report.
  
  It seems necessary different presentation between the first page and the following pages. Has anyone required even like that? Any advice will be useful.
  
  Thank you
  Clark

  Do you use a for-each@section to get the different sections?

  In this case use "Different first Page" in the "Page layout".

  Published by: amri on July 13, 2010 15:34

• Assignment of the different behaviors for instances of a symbol

  Hello everyone, I want to assign a different behavior (action script) to different instances of (a) symbol, what should I do? Thank you very much. Sincerely Mohsena

  give everyone a different instance name and assign different behaviors for each.

• Difference between DDR2 PC2-4300 PA3411S-2M1G and PA3411U-2M1G?

  How is the difference between DDR2 PC2-4300 PA3411S-2M1G and PA3411U-2M1G? I would like to buy, but I don't know who for Toshiba Satellite A100-847? Help, please

  I understand that you are a bit confused, but the two modules are the same.
  The modules are 1 GB PC2-4300 DDR2 533 MHz
  I think that it s just a new version and, therefore, it s a different number.

  I discovered that the module of PA3411U-2M1G is compatible and you can use it.

• What is the difference between a 32-bit operating system and a 64-bit operating system?

  ... Can someone explain to me what is the difference between a 32-bit operating system and a 64-bit operating system?... How are they different from each other in the feature and so on...?

  Microsofts own FAQ - http://windows.microsoft.com/en-gb/windows/32-bit-and-64-bit-windows#1TC=windows-7

  Apart from the above, the biggest difference you're likely to notice is the amount of memory, they have access to- http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778(v=vs.85).aspx #physical_memory_limits_windows_7

• The difference between the strength of the signal and quality?

  Hi all

  According to the Cisco documentation

  Low RF signal strength does not mean the lack of communication.

  The quality of the signal is low means poor communications.

  If someone can explain to me the difference between the power of the signal and the quality of the signal?

  In accordance with my AP home I see that this signal strength is measured in numbers like 50% or 100%.

  But what is the quality of the signal and how to measure me?

  Thank you

  Mahesh

  Big question...

  First, let's look at the notion of signal quality and strength... Suppose for a minute you're front row at a rock concert right next to the speakers. Sound is loud, you can't hear anything else that scream. It is an example of a strong signal but poor quality.

  As for the signal and the noise of measurement or should we say quality of signal. Providers sometimes give you a % or dB scale when ranking signal. You can't really do headers or tails of the % scale because each vendor has % different measures. But check your access point, because you will be able to change in dB.

  Look at dBm. At the moment my client shows:

  Signal - 59 dBm

  Noise - 98 dBm

  The dB scale is simple. More PB the STRONGEST signal. You'll see - 59 of the signal is good, in fact, I'm about 50 feet from the AP. If you are under the ap you will get as a - 30ish. Noise, we do not want to be noisy, if we want to see the noise to-100. More low is the dB of noise as loud noise.

  So we're back out the example above. Next to the speaker, you're showing tell - 30dBm, but your noise can be as - 70dBm...

  Does make sense?

  Normally, you want to see your signal not exceeding 67 - not for voice or - 76 for the data. And your noise should be greater than-90.