Different colors depending on where the edited photo is considered

Similar Questions

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• Slideshow - nav problem! -Drag to the right or left depending on where the timeline is...

  Hello

  I have finished my animation and struggling to find a way to complete the task im trying to do.

  Basically, I made a normal slideshow with 5 pages. one by one the slide from right to left.

  It works fine, the problem is that I also have buttons in nav that controls which slide you want to access.

  Let's say that im on the second slide and you click on the nav for the expected slide button, I want the drag image from the left rather than the right. So depending on where the timeline is up to and what nav button is selected will determine if the new page will slide to the left-right or right-left.

  Also another problem with this is I want to drag in the opposite direction when the new a behind the scenes in the current page.

  Ideas, any help would be greatly appreciated.

  Thank you

  Hello

  To do this, you will need to use an if statement conditions established for the code temporal references corresponding to the position of mounting the process loop, in combination with sym.playReverse ();

  I made a sample project for you reference. (For the moment, the only button that works is the first gray button, and it controls the first image that appears in the slide show). Click on the image below to download the image.

  

  https://creative.Adobe.com/share/70b0b985-b447-4098-97f4-d56a0aced802

  Let me know if you need more clarification. It's a bit tricky wrapping your brain autour, but once you get by nailing the first image it's simple. :) Also, remember that I used the time codes in my code in the project, you can feel free to use the labels in order to make sense of things in your own project.

  I hope this helps! : )

• How can I change the folder where the application Photo looking for pictures?

  I have a new laptop and when I add pictures in the pictures folder in my library they do not appear in the Photos app. All it says "there no file or folder in this point of view." I'll try to find a way to change the folder "Photos" in the search, but I don't see anything. The only thing I can think is that this is my second camera Windows 8 (from a Surface Pro 3) and when I started this diet I said to copy my old setting and he can always try to search for images in the directory of the other system. I noticed that my music was the same, but they give you the option to change the folder from the outset.

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  Please refer to the suggestions Adam A (Windows) responded to the March 8,2014

  and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-pictures/Windows-81-photos-app-does-not-show-any-photos/5b1740bc-d87d-4d07-afe5-c1a60cdecd55

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

   

  Hope this information was useful. Let us know the results once you have tried these methods.

  Thank you

• Photoshop CS6 extended, where the "Edit Source" option in the 3D Panel

  I'm still working on getting the speed with the 3D tools
  in Photoshop CS6 extended.  Trying to
  follow a tutorial Youtube
  dealing with depth maps. In fact, many tutorials on 3D
  used this particular feature. After creating a depth map image that they
  then select "Edit Source".
  I'm not find it.

  in this current video presenter selects "depth".
  Card"from the 3D Panel, then in the"Properties"Panel it
  by clicking on a button "Edit".
  Source ". My Panel is the same; under the "Edit Source"
  button.

  I have a 3D created from steps "3D" image > 'new '.
  Mesh layer.

  So I am able to choose the 'depth' of the 3D card
  The Group of experts. However the "Properties" Panel has no option to change «»
  Source"and I cannot find this option anywhere else.

  Y at - it something broken with my copy of Photoshop? or is
  There are a few tweak I don't know?

  Why have I not an "Edit Source" button?

  There are at least two ways to change the source of depthmap. One is by double clicking on it in the layers panel, and the other way is using the 3D properties panel, ensuring that you have selected the depthmap, then by selecting "broadcasts" and "Change the Texture".

  

  

• Where the main photos folder (using the Amazon cloud backup)

  I use OS 10.9.5 on an older iMac.  Backup with Amazon Cloud stand to point to the folder containing my thousands of pictures.  Could someone tell me please in the appropriate folder? Thank you!

  Your original photos? They are listed in a folder within the iphoto library, which, by default, is located in your pictures folder.

  Frankly, there is no easy way to do what you want to do without export your images to iphoto first.

  That said, this post

  https://earthalbumblog.WordPress.com/2016/01/01/syncing-photos-from-Mac-OS-x-PHO tos to amazon cloud drive.

  Describes in detail how to do what you want but it requires trust in the Terminal. Read it carefully. Don't forget he gets only your originals and none of all the extra work you have done - edit, organize and so - in iPhoto.

• Different color bands appeared on the Iphone.

  Hello, I dropped my phone the other day, when I turned this back on loads of different lines appeared on the screen, the phone is not usable.

  Can someone help me please?

  

  A replacement of the screen will fix it.

  Apple made them.

  You can also find an independent repairer deemed to replace the screen for you. If this road, look for someone who offers a guarantee of 6 to 12 months. And don't go for the cheapest. This also waive all future Apple warranty services.

• Screen flashes different colors and freezes at the same time, there is a video card problem?

  When it gets really bad most of the screen will Blanch and freeze. This global problem cut in and out, but is common.
  Any help would be greatly appreciated.

  EDIT: I forgot to mention that it is a HP G62 laptop.

  Hello

  Yes, it could be a video card problem. Let me suggest that you run this Fix It routine: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems#.

  Let me know if this helps you.

  Kind regards

  BearPup

• You will need to fill color different colors in the same plane. How can I do?

  I am new to Illustrator, so I apologize in advance for this simple question, but I searched and can't find an answer.

  I have outlined a few letters and you want to fill different colors inside, as on the logo that I attached below.

  How can I do the simplest? Tried it with the pen tool, make a circle, then using pathfinder, but can't make it work.

  

  Thanks in advance for your help

  There are many ways to do it.

  Perhaps the easiest and most direct way to create a gradient, but you would need to edit a lot of stops/nodes (points of color)

  Instead,.

  Dig, make a PATTERN and using PATHS of CLIPPING (as a mask for clipping in Photoshop).

  In this way, you can change the model, the position and the angle of your stripes easily.

  Here's a way to do it:

  1 CREATE A PATTERN.

  I created a series of rectangles with the approximately the shape and color, I want to repeat

  

  2 MAKE A NEW RECTANGLE AND APPLY THE TEMPLATE

  This goes in the same layer as your chart

  

  3. with your graphic (path) above the rectangle (path) in the same layer, MAKE a MASK of CLIPPING

  

  4. Rotate the rectangle (make sure you have "transformation plan" turned on)

  

• How to make a loop with variable values depending on where you are in the loop

  Hello

  I need loops / nested loops that choose different figures depending on where you are in the loop.

  The entire function must operate at times 'ml '. 'ml' is a dynamic figure.

  Loop 1 = while the loop is the first 12 iterations, "exconemp" must be equal to 100. 13-24 iterations, 'exconemp' to 102.5 equal, for 25-36 TI 105.06, 37-48, it will be 107.69. This must change each 12th iteration until he reached 'ml '. The calculation takes the value of the previous 'exconemp' and then that multiply by 0.025.

  Loop 2 = while the loop is in 120 first iterations, 'abc' should be equal to 0.015 and additional iterations should use 0.01. It should also work in a way to know if 'ml' is greater or less than 120 and work accordingly.

  My main problem is - this - how can I get loops to go like this:

  While the iteration is < 12, to do this, THEN take the final figure (12th iteration) and begin the 13-24, make this SO etc etc.

  How to produce a THEN statement? I can get the code to pick up the final values, but does not change along the way.

  I think I might better create an array for loop 1, but I'm not entirely convinced of that. Also, I think it would be better/more net if I can get "month total 1 ' and ' month 2 total ' in loops, but do not know how to do this.

  The values I need to produce (only 36 first shown):

  1-12 = 125.55, 251,65, 378.31, 505.52, 633.29, 761.63, 890.53, 1019.99, 1150.03, 1280.63, 1411.81, 1543.57
  13-24 = 1679.05, 1815.12, 1951.79, 2089.06, 2226.93, 2365.41, 2504.50, 2644.20, 2784.52, 2925.45, 3067.00, 3209.18
  25-36 = 3355.19, 3501.85, 3649.15, 3797.11, 3945.71, 4094.96, 4244.87, 4395.44, 4546.68, 4698.57, 4851.14, 5004.38

  var ml = 240 / / dynamic figure, multiple of 12 up to 780
  var exconemp;
  var exconem = 100;
  var inf = 0.025;
  Tree var;
  var tec;
  power of the var;
  var fvis;
  var abc;
  var fvee;
  MVT var;
  function myfunction() {}
  
  Loop 1
  
  While (ml < = 12) {}
  exconemp = exconem;
  // }
  so that {(ml > 12)
  exconemp = exconem * inf;
  //}
  
  end loop 1
  
  trace ("exconemp =", exconemp); employee contribution
  
  tree = exconemp /(1-0.2)-exconemp;
  TEC = exconemp + tree;
  trace ('tree', tree);
  trace ("tec", tec);
  power = Math.pow (1 + 0.07, 1/12);
  
  Loop 2
  
  While (ml < = 120) {}
  ABC = 0.015;
  //}
  then {}
  ABC = 0.01;
  //}
  
  end loop 2
  
  fvis = power *(1-abc/12);
  trace ("fvis =", fvis);
  FVEE = tec * fvis;
  trace ("fvee =", fvee); month 1 total
  MVT = (CET + fvee) * fvis;
  trace ("MVT =", MVT); month 2 total
  //
  
  for (var i: Number = 0; i < ml; i ++)
  {
  MVT = (CET + MVT) * fvis;
  trace ("tfvloop =", MVT);
  }
  }

  I hope that I've explained this well enough.

  Thanks in advance.

  I think that will do it even if I don't quite get the numbers you posted.

  Stop();

  var ml = 48; figure dynamic, multiple of 12 up to 780
  var exconemp;
  var exconem = 100;
  var inf = 0.025;
  Tree var;
  var tec;
  power of the var;
  var fvis;
  var abc = 0.15;
  var fvee;
  MVT var;

  MyFunction();

  function myfunction()
  {
  exconemp = exconem;

  for (var index: uint = 1; index)<= ml;="">
  {
  trace(index + "--------------------------------");
             
  tree = exconemp /(1-0.2)-exconemp;
  TEC = exconemp + tree;
  power = Math.pow (1 + 0.07, 1/12);
  fvis = power *(1-abc/12);
  FVEE = tec * fvis;
                     
  if(index == 1)
  {
  trace ("month 1 total =", fvee);
  }
  another if (index == 2)
  {
  MVT = (CET + fvee) * fvis;
  trace ("month 2 total =", MVT); month 2 total
  }
  on the other
  {
  MVT = (CET + MVT) * fvis; now that we're here the MVT auto perpetuates on himself
  trace ("months" + index + "total =", MVT); month total n
  }
                     
             
  If (index %12 == 0)
  {
  exconemp = exconemp *(1+inf);
  trace ("changed to exconemp to:" + exconemp);
  }
             
  If (index % 120 == 0)
  {
  ABC =. 01;
  trace ("changed abc to:" + abc);
  }
             
  }
  }

• I wish that the tabs colorful. is it possible with Firefox? And or each new topic have a different color tab.

  I wish that the tabs colorful. is it possible with Firefox? And or each new topic have a different color tab.

  The ColorfulTabs extension can be useful for you.

• How the color of a police of 2 different colors? Please help me :)

  How can we the font color with 2 colors in windows applications?
  I know that the windows fonts are colored in applications (such as messenger, MS word)... because the police are (colorless) originally... my question: is it possible to the color of the font with 2 different colors? as the upper part of the letter A to be yellow and the Red lower part? or as describing the letter with a different color?
  and by the way, I don't want not something does not like using the WordArt in MS word... who uses images... I want a software to color the fonts we use in messenger/wordpad / any application under windows (customizable color pixel by pixel)... because the demand police colors... If anyone can help me with that? Thank you very much

  and please tell me if there is any software that can do that :)

  As I said, I doubt that there is no 'coloring software police' who will do what you want. However, contact one of the creators of fonts and see what they have to say. Certainly a person of professional fonts Foundry will know if it is possible to do what you want and if so, how. MS - MVP - Elephant Boy computers - don't panic!

• I removed the peaking mountains and the sky is now a different color and fuzzy?

  I reoved mountains FRO m a scene of the ocean and the horizon line is now two different colors.  In addition, the water/horizon are blurred.  How can I fix it?

  Use the camera icon button to post pictures on this Forum.

  

• ??? Combine shapes of different colors, then cut a new form of the combined form?

  Hello

  I was wondering if anyone knows how to do this...

  (see attachment).

  Thank you very much!!!

  

  The easiest way is to convert all 3 forms in a "Paint" object You can then assign each a different color, including 'none' for the borough.

  The objects remain separated and can be moved freely.

• How to create a logo with the letters in 2 different colors

  I need help with a logo. I am trying to create a logo were it is as if a light shines on the type then part letters are in 2 different colors.

  Set the type by using the text of point tool (meaning click then type, no click-drag-release then type). Using objects of type two, one for each line.

  

  Draw the path of the light with the pen tool, fill it with yellow and move it to the back (object > Arrange > Send to back).

  

  Select the first line of text and the spotlight and go to object > clipping mask > make.

  

  Now simply select objects of type with the direct Selection (white arrow) tool and fill them with the blue wire.