Thunderbird is painfully slow

Similar Questions

• Satellite Pro A40 works now painfully slow

  Hi all, I have a satellite pro a40 which has served me well for a long time here.

  Although it runs painfully slow, now all the programs, including the internet despite my speed of 4 MB.

  I have zone alarm that made regular virus and spyware scans, I tried to defrag and disk clean up but not of the above solve the problem long term.

  Short of ideas, if anyone out there can suggest a remedy? Thank you.

  Hi Urbansafari,

  There are a few things you can try to improve the speed of your A40 - I guess you're talking about the speed (or lack thereof!) to which your laptop seems to be tasks such as opening new windows, programs etc.?

  The first thing to do is to look at the list of all programs start; Uninstall anything you don't need really or use is a good way of clutches back disk space (Windows uses hard disk as 'virtual memory' space to supplement the RAM mounted inside).

  The next thing to do is look at what programs are started in the background when you start Windows. To do this, click Start, then run and type msconfig. In the window that opens, click on the start right tab and you will see a drop-down list of all the programs that start with Windows. Without recognition program names, it may be best to leave them because they can be processes required by Windows. Uncheck all the programs you want to start automatically the next time you turn on the computer. When you are done, click on save and you will be prompted to restart the A40 for the changes to take effect.

  It is perhaps that a new installation of Windows is needed to delete all the temporary files and the old registry entries that have accumulated to over time, in which case backup all your data before running the recovery disc.

  One last thing to consider is the weather you may qualify for an upgrade memory HDD largest capacity, which are both reasonably good solutions worked for a slow running computer.

  Let us know if this is useful and how you...

  Weezle

• Lightroom PAINFULLY slow.  Someone at - it a cure?

  Lightroom is running PAINFULLY slow.  The question is more exacerbated when spotting, how it is almost impossible to do the work.

  I had this problem repeatedly with lightroom, and others have as well.  It seems that no solution for it.  It really seems as if no one at Adobe care half of these questions.

  I'm running a PC with the following specifications, and so I do not understand the reason for the delay.

  CPU: Intel Core i7 - 4930K

  Graphics card: ASUS STRIX GTX970

  OS drive: Samsung 850 Pro

  Project drive: Samsung 950 Pro

  MB: ASUS P9X79 PRO

  RAM: 32GB

  I've attached a screenshot of my system features:

  

  What version of Lightroom?

  The question is more exacerbated when spotting, how it is almost impossible to do the work.

  Yes, it's a drawback known spot removal/adjustment Brush tool, if you do a lot of spotting or adjustment of brush, Lightroom slows down.

  Some things you can try

  • If Lightroom 6 or Lightroom CC, disable the GPU acceleration
  • Do all your spot healing/brushing as the next ╔diter last step
  • The final stage of editing, turn on the calibration of the lens (if desired)
  • Get a faster processor

  If none of that works, make room and healing brush in Photoshop or Photoshop Elements.

  NOTICE: I speak for myself only (and certainly not for Adobe, I have does not work and never worked for), but this non-destructive editing technology they built in Lightroom is a fantastic technology. except in the case where you do a lot of brushing or healing spot, in which case the technology requires have a lot more power than most computers, and so for a lot of brushing or healing spot, technology fails.

• AE painfully slow and prone to crashes

  Despite a new computer powerful legacy is painfully slow and prone to accidents, often with 'sorry' messages about this duty planting now. some tips to make it faster and more stable? I already use the resolution quarter instead of full because I prefer the same speed if with blurry images. I am also very in the Organization of the project and do not have something heavy, but the program is like a little baby, often while rendering for previewing of the ram drive and slows down like crazy and often crashes. It also seems to ignore the Task Manager end tasks when frozen, forcing me to wait longer and then takes a lot of time for me to reopen it, often just for re - crash after clicking on the icon of the drive ram again. I use an i5 QuadCore 8 GB windows 8.1 office and after effects cs6

  8 GB of RAM could be considered "a bit high" for Windows if you are just in MS Word or Internet Explorer, but for the AE, you're barely satisfying the minimum requirements.  I have 48 GB and it's barely enough for draft resolutions (4K) more complicated or higher.

  System requirements | After Effects

  Try to reduce the RAM reserved for other applications (preferences > memory & multiprocessing > RAM for other applications), using an SSD for your OS/programs and using an SSD for your caches.

  Some of the information below is useful (although somewhat outdated specifically regarding Ray Tracing).

  http://TV.Adobe.com/watch/CS6-creative-cloud-feature-tour-for-video/how-to-optimize-after-Effets-cs6-pour-Haute performance.

  performance optimization: Adobe Premiere Pro and After Effects | After the effects of interest area

• Why is the last Thunderbird on Fedora slow 22, 100% cpu?

  Hello

  I've updated my Fedora 22 using dnf today, and now it's suddenly very slow using thunderbird (38.0.1). You reply to a mail of the results in a significant delay in opening a window, then a further delay of filling with the previous mail and then it takes forever for strikes to appear in the message window.

  Deactivation of the modules does not help.

  Take a look in the activity monitor on the Tools menu and see if he is mired indexing.

• Why Thunderbird runs very slow on Windows 7 CAUSE: McAfee

  Installed Thunderbird worm 31.6.0 on my desktop Windows 7 Home Premium, SP1, 32-bit, 4G ram, Intel i5 processor clocked at 2.66 GHz,
  a few months ago and he ran very well in the beginning.
  Now that I've used for some time it slowed considerably.
  All Thunderbird functions slow clicking to select a group of messages, even deleting just one single message, opening a message, etc.
  It has compact records on several occasions, and I did not have a large number of stored messages (maybe the total of all files, including waste, spam, sent, etc. is about 500).
  I use McAfee Anit-Virus, which ignores analysis attachments to emails.

  There were reports of slow performance with Thunderbird on Win7?
  Maybe my problem is caused by McAfee?
  Ideas, suggestions are welcome,
  Thank you
  Ken

  Good. You can then mark the thread as "Solved" Please?
  Thank you.

• iMac is painfully slow startup

  Hello

  It is has been a problem for a while, but seems to have slightly worsened with El Capitan. After start-up or a restart, it is a good 6-8 minutes - without exaggeration - until my computer can begin to open programs without huge lag. About 10 minutes until it is at full speed.

  iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 8 GB 1600 MHz DDR3

  Any ideas, or is this normal? I repaired disk permissions, flushed trash and generally keep the machine running as clean as possible without being an expert.

  Thank you.

  It is not normal, not even remotely.

  Backup everything then check your hard drive. Slow start ups can be a symptom of a failing drive.

• Thunderbird is relentlessly slow to open a new message, download the messages and stops when I'm typing a message; version 31.6.0 Wndows XP

  See above. This is the case for more than a year and nothing it hardens so far. It adds to boring, disruptive to our business, waste of our time and generally unpleasant.

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Very close to the dumping of Mozilla Thunderbird. The slow is simply not worth the hassle and support sucks.

  I have been using Mozilla Thunderbird for many years. It has always been a good system. Now, I get so when I hit delete, it takes a minute or two to delete the e-mail message. I tried to follow all the instructions on the help system and have turned off Mcafee whenever I try to read my mail.

  I'm not an expert in computers, but can generally follow directions well enough. The help of this system Mazilla fact dependent on questions of a group doesn't make any easier these problems. I see the same questions asked by many people without clear answers to why this is happening.

  Unfortunately, if this problem is not resolved soon, I'll have to drop Mozilla for another system...

  Bruce Cunha
  [email protected]

  Saying suck it support is not exactly being polite towards those which expect free aid. I prefer to think that you are just frustrated and the offensive remark was not intentional.

  It would be useful that you could provide some information about your situation, etc.

  You have McAfee and you say stop reading emails, do not turn off completely, just stop it analyzes e-mails. This will mean that you don't have to keep it work and stop.
  Here are the instructions to do this.

  • https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  Please provide the following information, so that it is possible to get an understanding of your situation and the installation program:

  • What operating system do you use?
  • What version of Thunderbird?
  • It's an IMAP or POP e-mail account, that has the problem?
  • If IMAP - is it a gmail account?
  • You have one or more e-mail accounts?
  • How frequently you compact your folders?
  • When did finally empty and compact your deleted folder?
  • You have several folders?

  re: the Inbox
  

  • This file used as an Inbox for mail entering with only a few mails is inside or used to store a load of emails?
  • Have you set up archiving Options to archive by month and keep the folder structure?
  • Do you have emails Archive more of for example: one month, two months?

  Please answer the queries above, if the forum includes your current situation.

• Thunderbird is very slow, most of the time does not? (user uses McAfee). RESOLVED after user removed the virus using McAfee

  "After a windows update and an adobe flash update yesterday / this morning, thunderbird either works very slowly and most of the time, it is not meet and crashing." I doesn't have any setting on my computer. So can you please help me, so I can read my mail

  McAfee released an update problem. Please contact McAfee support helps to correct your settings from McAfee. I heard good things about their cat in today.

• Update El Capitan (to 10.11.3), now, many web pages are painfully slow...?

  I've recently updated El Capitan 10.11.3 on my macbook pro and many / most of the web pages are now very slow to load.  I checked it is not my wifi connection or service and none of my other devices have the problem.  I have this problem with a unit that I've just updated.

  Any suggestions?

  Info on the device:

  MacBook Pro (retina 15 "mid 2014)

  2.8 CPU clocked at GHz Intel Core i7

  16 GB 1600 MHz DDR3 RAM

  Intel Pro Iris 1536 MB graphics card

  1 TB Flash storage

  MacBookPro11, 3

  You run any kind of antivirus, cleaner, optimizer, or anything like that?

• HP PSC 1315 scanning painfully slow with HP 13.1 on Windows 7 Solution Center

  I just upgraded to Windows 7 Premium 32 bit XP and installed the HP Solution Center 13.1 software.  I created my preferences of scanning for documents at 200 dpi with shades of gray and when I scan a document, the scanner is extremely slow and it looks like it would if I were scanning at 1200 dpi.  He never used to do this with the older XP HP Solution Center.  Y at - it a fix for this problem.

  Well, the client replied by a PM to confirm the following information:

  Previous analyses is produced in 5-7 seconds, current scans take longer than 50 seconds in PDF format. Copies to print during the normal 5-7 seconds.

  You can acess Windows Fax and Scan and try to make an analysis of this program or MS Paint to let me know what the time is for a WIA (Windows Image Acquisition) scan?

  Get back to me after that and I'll repson with as much information and assistance I can!

  -Spencer

• my windows XP is painfully slow I regularly get the "not responding" in the line of the LTTE (top of the screen)

  my pc is very slow to respond to the mouse clicks that I regularly get the "not responding" in the title (?)   the line at the top of the screen for example "Inernet Explorer (not responding)."

  Ideas please it makes me crazy!

  Rgards

  Eddie

  Hello

  1. What is the full and exact error message?
  2. This only happens when you attempt to use internet explore?
  3. what version of internet explore do you use?

  See the article below to improve the performance of the computer, and then check the issue.

  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  You can also view the below article check contains information about the internet Explorer stops answer question.
  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449

• Windows Store downloads PAINFULLY slow

  I installed Windows 8 Pro (final version) on an Oracle VirtualBox and everything works well EXCEPT downloading things on the Microsoft Store. When I started the store, he said that I had to update the 15 applications (the ones provided with Windows, I think) and I told him to go ahead.  The next screen came and it showed the 15 apps (things like photos, people, etc.) with a progress next to each bar. Under the progress bar, he said "pending."  After about 5 minutes, many of the indicators of State went to «Couldn't...» "and several"download. "  After SEVERAL HOURS (I'm logged on the corporate LAN that works normally about 10 MB for downloads), SOME of the itmes finished and some went to an error state.

  That is what it is?  Why is this happening?  The Microsoft Store is BACK ' ed?  IE 10 on Windows 8 works fine without any problem of speed.

  Thank you

  Owen

  Hmmm I just disabled my wired Internet (on the virtual machine) and don't have my connection wireless enabled (Windows 8 thinks it's a wired connection)...

  In any case, it was a little slow, but all applications downloaded and installed.

  What could be the problem with the connection to the LAN does not not for downloads from app store?

  TIA,

  Owen

• Lightroom 2015.6 Painfully slow since update

  I use Windows 10, 16G memory, processor GPU active.  Since the upgrade to 2015.6 a few days ago, the development is very slow.  Very slow movement of the photo for the photo and the delay in introducing changes.  Everyone knows about these problems?  Thanks in advance for any help you can offer.

  Richard

  Memory leak was identified in LR 6.6 and 2015.6 CC: Lightroom 2015.6 extremely slow. Community customer Photoshop family

  My system with 12 GB memory begins to slow from LR reaches about 50% memory usage and then worsens when you browse or edit images in the develop module. It will cause lag adjustment brush which worsens when you change pictures more. This is regardless of the setting of GPU in LR preferences. Some have found reducing the window of LR, wait 2-3 seconds, and then maximize it frees additional memory. In my tests, it helped some, but closing and recovery then LR releases even more memory. In addition, if you rarely shutdown and restart your system, this can reduce the amount of available memory and other issues. I suggest to close your system at least once a week. The maximum amount of memory will become available for use by LR during the next reboot.

  That's all you can do for now until an update with a fix is released.