Different methods of cloning!

Similar Questions

• Different methods of ActiveX appear when you reference an inside or outside of Labview VI

  My question is about the methods that are available for a VI referenced via ActiveX.

  I am particularly interested in the method "Run a VI", which appears in Labview using reference open Vi, then call node.

  In particular, this method of 'Run a VI' has a parameter "Wait until the fact" that I need to.

  In Labview, I managed to adjust this setting and run the VI in the background (see first photo).

  Now, I get confused when you reference this VI through Labview /outside/ ActiveX (Matlab in my case).

  Function Matlab (see second photo), the VI referenced has a method called 'Run', but not 'run VI '.

  This command runs the VI, but I do not see any parameter 'wait until what". In fact, there is only one listed setting (it appears as Run (handle, Variant (Optional)), which means that outside of the object itself, there is only an Optional Variant type value).

  (I've highlighted the method in green on the second photo).

  In fact, when looking at the methods that appear in the image of Matlab, it seems many are different from those which are accessible in Labview through the node invoke.

  Is this normal? If so, how can I set the value of the parameter 'Wait until done' for the 'Run' / method of "Run a VI" via ActiveX on outside Labview?

  Is this normal? Yes. Why? Because the first method is not ActiveX. It uses the VI server. Totally different beast. Therefore, the interface will be different.

  LabVIEW documentation indicates the real signature must be:

  Syntax

  object. Run ([Async])

  Parameters

  Name	Type	Description
  Async	Boolean	If it is TRUE, there is no need to wait for the VI finish the race. The default value is FALSE.

  I don't know why you see the signature as "Run (handle, Variant (Optional))"from Matlab. "

• Different methods to find a form of rectangle Center and rotation in vision assistant

  Hi This is my first shot at the machine vision and Vision Assistant tool. I am trying to find a rectangle shape in an image and determine its Center and rotation around the Center. I started with this image:

  

  and I increased saturation and contrast to make a clearer target area:

  

  I am interested in the main red rectangle turned about 5 degrees to the right. For me, it seems that there is enough contrast edges, but quickly, I tried some of the edge (including the rake) detection and pattern matching algorithms and I don't get any useful results. Maybe it's the white lines don't interfere. I tried to extract just the plan of the red color but as white also contains red these lines always appear.

  I'm hoping to get some ideas for different approaches get precisely the Center and the rotation of this part, as well as the guidance you need to succeed. Thanks for the tips!

  I would try to extract the rectangle using color thresholding.  Analysis of particles of use on the rectangular blob and you should be able to get a rotation value.

  Bruce

• Java if statement error: cannot reference a Variable no final inside an inner class defined in a different method

  Hi, I am a newbie to blackberry java development, and I need help. I want to check if my SearchBox is equal to 1, or any other number, but when I try and put this, I get an error, could you take a look and tell me where I'm wrong, and how I can solve this problem.

  See you soon,.

  Max.

   BasicEditField SearchBox = new BasicEditField("Go To Page Number: ", "", 3, EditField.FILTER_DEFAULT);
      add(SearchBox);
      ButtonField myPageButton = new ButtonField("Go to Page",ButtonField.CONSUME_CLICK);
      hfm3.add(myPageButton);
      add(hfm3);
  
      myPageButton.setChangeListener(new FieldChangeListener(){
          public void fieldChanged(Field Field, int context){
          if(SearchBox.equals("1"));
              Page1 Page1 = new Page1();
           UiApplication.getUiApplication().popScreen(Ui.getUiEngine().getActiveScreen());
           UiApplication.getUiApplication().pushScreen(Page1);
      }});
  

  If you want to access a local variable in an inner class you must make final.
  Another option would be to declare the variable in the class.

  Another thing: Searchbox will equal never '1', you need to use getText to return the text of the editfield.

• VM is frozen - it cannot kill with several different methods.

  Greetings!

  I have a Ubuntu Server VM running on 1 of my boxes of ESX 4.0 I can't do anything with.  It shows that it is running, but I'm not able to turn off, reset, snapshots, backup with VDR - anything!  When I try to perform an action on it, it says "another task is already underway."  I looked through the events of the virtual machine, and there are not hung tasks.

  Here are the steps I've tried.

  1 vmware-cmd & lt; VM config file path & name & gt;. hard stop

  2 vm-support - X & lt; VMID & gt; -This does not work because if I run this without the VMID it does list even the server I am killing in there.

  3. a kill-9 PID - this does not work because it says that there is no such process.

  It is a new installation of ESX, not an upgrade.

  Someone at - it any other suggestions on how I can get this virtual machine out of his frozen state?

  Thanks in advance!

  Adam

  Have you tried the console service perform a "service mgmt-vmware restart' and try again with the customer?

• Is it Possible to have 2 methods to load different run a lot in a typical Application of FDM?

  We run FDM Classic 11.1.2.3.00 with an ES11XG4-K adapter.  We have a request from FDM with 2 locations using the load method to replace. Is it possible have 2 slots have loads different methods; This is a have to use the Replace method and the other a fusion method run on a lot? If Yes, can someone guide me how to do it?

  Thank you

  See the classical FDM Administrator's Guide.  Batch loader files have a name format for specific file with the segment identifiers - starts ~ rental ~ Category ~ Period ~ LoadMethod.txt

  The tag of the Load method is a two-character segment.  The second character identifies the method load application target, for example "A" to append and 'R' to replace.  I think that's what you're looking for.

  See the Guide to the classical FDM administrator for more details.

• Bootcamp cloned for ssd won't start or even display

  replacement of HD with SSD on mid 2012 macbook pro with osx el capitan and windows 10.   Equip ssd external encosure and cloned successfully with CCC - installed in macbook and put old HD to external hard drive.  Then drive partitioned (1 TB) half using disk utility and winclone restored former bootcamp volume disk now external-new volume formatted on SSD.

  If I try to start windows using startup disk option get no boot device message.   If I try to boot with the option key at startup only osx, recovery, and efi are listed not bootcamp windows player is displayed (but all the files have been correctly copies the volume bootcamp.

  I'm stumped

  1 EFI can point to your facility in W10. Please check.

  2 Winclone has two different methods of starting. Please visit http://blog.twocanoes.com/post/68982862031/efi-and-windows-on-option-boot-screen . W & / W8 + and W10 behave differently.

• Best practices for cloning a VM ESXi

  Hello

  I'm looking for the best method of cloning a VM ESXi without causing conflict of IP addresses. I thought that I could follow the steps listed in this article (http://geektank.net/2009/02/howto-clone-a-virtual-machine-on-vmwares-free-esxi/) and before starting the virtual computer, change network settings to point to a vSwitch which has no method of connection to another part of the network. Then I could enter the virtual machine, change the IP address and hostname, and then reconfigure the vSwitch to be connected outside. I should Sysprep the computer that I'm cloning or not?

  I'm on the right track, or is there another way to do this?

  Thank you

  You'll want to sysprep the computer to generate a new SID.  I'm generally a vSwitch on my stand-alone hosts which is a "deployment" vSwitch.  There is no natachasery attached to it and so unable to go anywhere.  This will allow the power on and change of the IP address that you stated.  You want to also make sure that you have a different MAC address for the virtual machine that this can cause problems network of course.

• Value of the argument of the Add method must be a date or UsiTimeDisp.

  I am writing a code to allow users to define what to look for in the navigatro and then use the results for further analysis. But when I try to search by date of creation I get an error that says: "add the argument to the value of the method must be either a date or a USiTimeDisp. I have tried different methods to enter the dates (dd/mm/yyyy, mm.dd.yyyy etc) but none have worked.

  What is this error and how can I fix?

  The add method does not accept a string but only CDate or UsiTimeDisp.

  Creation usiTimeDisp

  protected cdateVal: cdateVal = now
  
  protected timedispVal: set timedispVal = createTime (year (cdateVal), month (cdateVal), day (cdateVal), (cdateVal) hour, minute (cdateVal), second (cdateVal))
  
  

  In this case, I started with a CDate I created using now.

  How to get a CDate from a string. Here, we encounter the problem of the locale.

  English: 22.08.1970 10:22:30

  German: 22/08/1970 10:22:30

  which is also reflected by converting a CDate chain.

  Option Explicit
  
  protected cdateVal: cdateVal = now
  
  Dim strVal: strVal = CStr (cdateVal)
  
  StrVal MsgBox
  
  protected cDateVal2: cDateVal2 = CDate (strVal)
  
  msgBox cDateVal2

  This code will work. It is capable of converting a CDate a CStr and then back into a CDate. This works if the string is formatted as expected by your locale.

  CDate ("22.08.1970 10:22:30")

  will work in Germany but fails in the United States.

  protected diademtimeVal: TTR = diademtimeVal ("22.08.1970 22:30","dd.mm.yyyy HH" ")
  
  protected timedispVal: set timedispVal = createTime (0, 0, 0, 0, 0, 0)
  
  timedispVal.SecondsFrom0000 = diademtimeVal

  you create a usitimedisp object using a fixed format string. This should resolve your request.

• Very weird behavior of LV OOP/classes: wrong dynamic distribution method is called

  I have very strange problem: a Subvi (start_scanning.vi) in my software is supposed to call a method on dynamic distribution (send_trigger.vi) of a class of LV:

  

  However, instead of calling the send_trigger.vi, a completely different method (with a different name and a component of connector without matching) of a class parent is called. LabVIEW then immediately displays a dialog box indicating "LabVIEW: an input parameter is not valid." For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. The first level VI "main.vi" was arrested in stranger on the block diagram of the 'GenericPlugin.lvclass:set_current_objective.vi '.

  GenericPlugin.lvclass:set_current_objective.vi (mentioned in the message of the dialog box) is the method that is called instead of the correct method. The input parameter invalid, that the message of the dialog box refers to is probably the enum that I pass to my method of distribution dynamic (this enum of course does not match the input parameter expected by set_current_objective.vi).

  I tried to give LabVIEW an additional clue he's trying to call the wrong way by putting another input to the façade of the set_current_objective.vi control (and plug it into the connector pane). Indeed, this change something: LabVIEW then completely stalls (does not respond to ANY user input more), but the correct method (send_trigger.vi) is not executed (sensors inside the method do not run). What is the case if, rather than add additional control on the front of the set_current_objective.vi Panel, I try to pass another enum value to send_trigger.vi.

  A strange observation is that at some point the VI (e.g., start_scanning.vi) somehow try to call the method of dynamic distribution gets locked (the façade seems that ran the VI; and the block schema cannot be modified more).

  I would be grateful any indication which could help me to solve this problem, because I am really stuck now...

  All of the code-compilation of mass seems to have solved the problem.

• The instructions of different via RS232

  Hello
  First sorry for my English and thanks to google translate

  I'm trying to communicate with a receiver via the RS232 port.
  The instructions should be sent are like this:

  RF8507000
  MD2
  AT1
  BW1
   
  My concern is to send the data in writing "visa".
  In fact, I found a solution using a "constant line end" at the end of each command.
  but this has slowed the sending of information.
  When I send a single frame, the transfer immediately, but this approach does not satisfy me, because I want to send several different information.
  I thought I would send only frames this change in the buffer, but I don't see how.
  Do you think my title is good? Or do you have another solution?

  Just in case, however, attached is a variant of your code. While what I've provided may be of some use to you, it is really a crude way of doing things. But I hope you can see the different methods you could use to do what you want.

• The Windows Easy Transfer of data application does not work if there are two windows of different language.

  I bought a data transfer cable and I tried to make a transfer of data from the laptop with non - English Windows XP Profesional a laptop with Windows 7 Home via WINDOWS EASY TRANSFER viz English.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer
  but I was surprised that I got a message "that a different language to the windows version has been so that data transfer can not live there. And above all, there was a message "that the data cable has not been detected."
  Microsoft is working with so many language versions, then why this simple problem is not solve upward? It cannot be too big problem to compensate for a versatile application that would work on all versions of Windows.

  No, it doesn't work of course between the various language versions, has never and will never be.  Will not be fixed either, because Windows XP is in the extended now support (only security patches issued) and becomes entirely non supported in about a year.  Save and move documents using a different method.

• ASA VPN with ISE and different backends WBS for authentication

  Hello

  I have an AAA-problem I hope to have a few problems help.

  The problem ultimately is: how the ASA via ISE send Radius Access requests to different given OTP backends provided a connection to a certain group of Tunnel.

  BACKGROUND:

  I'll try to give you a brief picture of the scenario, this is what I currently have.

  A VPN system (ASA 8.4 (4)) where I let my users to choose among 3 different methods of authentication being

  (1) certificate (on chip card)

  (2) token - token of the OTP (One Time Password provided via the smartphone application: using pledge of Nordic OTP-Edge transport server)

  (3) SMS - OTP token (Nordic OTP - Edge transport server SMS OTP)

  The choice corresponds to different groups of profiles/Tunnel connection.

  Today, all authentication requests go directly to the OTP server and authorization goes directly to the AD via LDAP.

  THE PROBLEM:

  The problem occurs when I try to put in the ISE in the mixture.

  What I obviously (?) would like to do is have all the network authentication/authorization to go through my ISE platform to take advantage of a centralized administration, monitoring etc.

  Again I would need to use data bases different backend such as AD and Nordic OTP - Edge server, but then mandated by ISE.

  For me to be able to know what back-end AAA to the proxy system, to somehow be able to distinguish the incoming Radius Access-requests.

  WHAT WE CALL:

  At the time of the ASA 8.4.3 Radius access request contains 2 new attributes, the name of Group of Tunnel and the Type of customer, when a VPN user connects.

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/ref_extserver.html#wp1802187

  QUESTION:

  The seams, that I can achieve what I want by looking at the access request attribute Radius "Tunnel Group Name" and forward my request to different backends OTP for the authentication part therefore in theory. But, how do I actually go ahead and set that up in ISE?

  I don't see this attribute when I look at the details of Radius Authentication for an authentication AAA of the ASA at the ISE.

  Best regards

  / Mattias

  I think you can hit the following problem:

  CSCtz49846: ISE does not match the condition with VPN 146 Tunnel-Group-Name attribute

  This issue is not specific to this attribute, as shown in the solution shown in the accompanying note

  Workaround

  Ensure that the attribute name does not include a '.' character. This also applies to some of the existing attributes in the dictionary of Cisco-VPN300. Attribute names should be changed so that they do not include a "." character.

• expdp/impdp method in the database upgrade from 11.2.0.4 to 12.1.0.2 an error in logic of "command line"?

  Hi DBA:

  We are evaluating different methods of upgrading 11 GR 2 DB to 12 c (12.1.0.2) this year, it is very important for us to use the right method.  It was reported that when DB version was 9i and has been updated to 11g, there were some order of tables 'line' was wrong when execute SELECT statements in application (Java application) - at the moment I didn't if it is ' select * from... "or any specific part with a"where"clause, and what type of data was wrong (maybe sequence CLOB data, etc.).

  I think I know, ' exp/imp', "expdp/impdp" logical backup of DB methods.  Therefore, Oracle automatically import data and fix it in each table.  If no error in impdp connects after it's over, should not be any mistake, right?

  If the use of the method of 'creates a new data + expdp/impdp basis for schemas user' 11g 12 c port data, questions:

  1. this method will lead to erroneous sequence data when ordering?  If so, how to re - generate the sequence number?

  2. this method can bring CLOB, BLOB data and without any errors?  If error, how to detect and repair?

  I use the same method in the 10.2.0.5 to 11g port data, no problem.

  I'll keep this thread posted after getting more information from application.

  Thank you very much!

  Dania

  INSERT... SELECT, CREATE TABLE in the SELECT and Export-Import will all "re-organize" the table by assigning new blocks.

  In place--update (using DBUA or command line) don't re-create the user tables (although it DOES not rebuild the data dictionary tables).  Therefore, does not change the physical location of lines for user tables.  However, there is no guarantee that a further reason for INSERT, DELETE, UPDATE instructions does not change the physical location of ranks.  Nor is it a guarantee that a SELECT statement will return always stored in the same order unless an ORDER BY is specified explicitly.

  If you export the data while it is still used, you don't avoid update sequences in the source database.  Usually results in a mismatching number sequence between the source database and the new database (imported). In fact, even the numbers may be different, unless you use CONSISTENT or FLASHBACK_SCN.  (These two options in exp / expdp do NOT prevent update sequences).   The right way to manage sequences is to rebuild or increase them in data imported with the values in the data source, once the import is complete.

  Hemant K Collette

• The Post of Restful Webservice method using

  Hi all

  I use jdev 12.1.3

  I'm new to the MAF.

  I want to use the Post of Restful webservice to MAF method. I have a variable defined in the service binding Restful web and if I use it with a HTTP client works not very well.

  Please let me know how to use the Post of service Restful MAF method.

  I made a data control to the Get method with json respose. Can I use the same data control with a different method for the position.

  Kind regards

  KP

  It depends on what awaits your REST webservice as input.

  You can try passing param1 = 123 & param2 = abc & param3 = load useful s bat

  The first feature film in references of function in the file application.xml - MAF is displayed by default.