Different VSAN on different PO.

Similar Questions

• VSAN with different suppliers

  Hello

  I have different nodes in my cluster from different vendors (HP and Dell), both servers have 1 local Spine disc and 1 SSD. Can I configure VSAN in this cluster?

  Thank you

  Yes, you can do it.  But this is not recommended and I wouldn't do it for production.  Thank you, Zach.

• Separate VSANS / Mgmt / Vmotion traffic on different switches

  Hello

  I want to build a hybrid Cluster VSAN 4 knots (6.x).

  I have 2 x 10GE switches dedicated for Taffic VSAN

  also 2 * 1GBE switches for management / VM / Vmotion traffic

  Each host has 2 10 GbE NIC, 1 uplink for each of 10GBE switches

  Each host also has 4 * rising 1GBE, 2 for each of the switches 1GBE

  My idea is to use 10GBE just for VSAN traffic (separate DVSWitch, an asset, a standby) on each 10GBE switch

  Also to use 2 Ports on the management traffic (separate DVSWitch, an asset, a standby) on each 1GBE switch

  And use 2 Ports on traffic VM (separate DVSWitch, an asset, a standby) on each 1GBE switch

  VMotion traffic would be on the same rising as management, but active / standby vice versa

  Question: is - this possiuble / useful to connect vmotion for 10 GbE uplink ports (active standby vice versa VSAN traffic)

  I appreciate any useful comment on my scheduled install (I have no boy networking)

  Couple thoughts.  You can run several vKernels to VSAN and vMotion (allowing one on each switch).  To VSAN, use of VLANS / subnets (one on each switch offers you a pleasant has / B space) while vMotion must have all the vkernel on the same subnet 2 ideally layer.  This allows for maximum reliability, in theory faster failover and access flow.  This also has the advantage of if your cluster is not big (bigger that say 48 ports) you can avoid having multicasting, leaving the switch (usually requires more quarrels with the cats of network) as each switch TOR will have its own VSAN network.    Then use the NIOC for butterfly and protect the traffic between them.  Now the NIOC is not as effective as SR - IOV (but its good enough) to 100% and you will maximize your investment 10 Gbps without swamping the things.

  • Network management interface VMkernel = explicit order of Fail-over = active P1 / P2 ensures 10.1.1.1/24 VLAN 100
  • vMotion VMkernel - an explicit order of Fail-over = interface = active P1 / P2 ensures 10.1.2.1/24 VLAN 101
  • vMotion VMkernel-B interface = explicit Fail-over order active = P2 / P1 ensures 10.1.2.2/24 VLAN 101
  • Machine virtual Portgroup = explicit Fail-over order = active P1 / P2 ensures 10.1.2.1/22 VLAN 102
  • Virtual VMkernel-A SAN interface = explicit order of Fail-over = active P1 / P2 in standby (or not use) * 10.1.3.1/24 VLAN 103
  • Virtual interface of SAN VMkernel-B = explicit Fail-over order active = P2 / P1 Eve (or not use) * 10.1.4.1/24 VLAN 104

  In this case, VLAN, 100, 101 and 102 will be on all switches.

  * 103 and 104 could be configured to only exist on each switch (has / B isolation, failover do not switch on the value and set up on both) or exist on both (and use standby) as described.  This design will focus on maintaining the communications host-to-host on the same switch (decreases complications with multicasting and reduces its lag time as VSAN traffic does not have to jump to another switch unless you run out of switch ports, but now with dense 40Gbps past using 10 Gbps break out in theory you could hit the limit of 64 nodes on a single switch).

  I'm curious of anyone thoughts on just disable the failover and forcing them to each core sticking to its switch (and accepting loss of communication) on this vKernel in the event of a switch failure.  I want to do some tests with both laboratory and to test the failover of the switch/path between both of these configurations (compared to a configuration unique vkernel).

  However, some people prefer a 'simpler' configuration if (and I'm not opposed to that).

  Duncan drawn active passive failover configuration with of the vKernel unique for each host.

  In theory not being not not as dependent on the NIOC for insulation of storage should help the latency for the short bursts it takes to NIOC launch design active active vs.

  Control IO SAN and virtual network

  • Network management interface VMkernel = explicit order of Fail-over = active P1 / P2 ensures
  • vMotion VMkernel interface = explicit Fail-over order = active P1 / P2 ensures
  • Machine virtual Portgroup = explicit Fail-over order = active P1 / P2 ensures
  • SAN VMkernel virtual interface = explicit order of Fail-over = P2 active / standby P1

• Only initiator zones with different targets

  Possible to have a single identical HBA initiator according to the different areas on an SDM with different targets in each area? or an initiator can only log into the area under one?

  Is below allowed on the MDS as well as the same vsan?

  zone name VM005_S05_C1_TO_VNX5300_SPA0_SPA1_SPB0_SPB1 vsan 10
  Member pwwn 20:01:b4:e1:0f:28:02:0 d init
  ! [VM005_S05_C1]
  Member pwwn 50:06:01:60:3e:e0:2 target: f2
  ! [VNX5300_SPA0]
  Member pwwn 50:06:01:61:3e:e0:2 target: f2
  ! [VNX5300_SPA1]
  Member pwwn 50:06:01:68:3e:e0:2 target: f2
  ! [VNX5300_SPB0]
  Member pwwn 50:06:01:69:3e:e0:2 target: f2
  ! [VNX5300_SPB1]

  zone name VM005_S05_C1_TO_VNX5400_SPA2_SPB2 vsan 10
  Member pwwn 20:01:b4:e1:0f:28:02:0 d init
  ! [VM005_S05_C1]
  Member pwwn 50:06:01:62:36:e0:14:2d target
  ! [VNX5400_SPA2]
  Member pwwn 50:06:01:6 target: 36:e0:14:2d
  ! [VNX5400_SPB2]

  If you use device aliases? fix?

  Do you use the improved zoning?

  Maybe you should do a

  "commit vsan 10.

  and finally, you also need to enable the zonset!

  BTW. you see error messages, while sticking to this list of 5300 areas?

  SSM

  Take a look at the "show running" and you see how areas and whole areas are configured and activated

• Connectivity host to 2 different bays/fabrics

  Hello

  I have a UCS environment with 2 vHBAs a blade connected to EMC CLARiiON, with 100 VSAN. We will migrate from CLARiiON to VMAX and at the same time we are migrating old MDS switches to new DMS switches.

  Requirement is that I would like to connect rising 2fc linking to fabric old talk to EMC CLARiiON and 2fc rising new fabric connection to talk to EMC VMAX.

  I'm being held VSAN even on the two switches (old and new) (VSAN 100), it is a demanding due to HP - UX server in the environment. So the same vHBA can connect to 2 different fabrics?

  Please let me know.

  / Rags

  That is right.

• Why is apple tv (4th Gen) using subnet different comcast

  I need to figure out if there is anything special/different regaurding how ATV (4th Gen) made the resolution DNS when wired to a Comcast cable modem only (no wifi and no router)?  I notice that my ATV selects a different subnet when ATV is set automatically resolve IP and DNS.  Example of my Dell PC Tower and Sony laptop automatically use a subnet of 255.255.255.0, but ATV uses the example below:

  67.166.208.26

  255.255.252.0

  router 67.166.208.1

  ATV works great just need to know why to solve network problems not related to my home office network and at home?

  Hello. You say there is no router, but I guess that the Comcast modem is also a router and DHCP server. Are you using IPv6? You use a static IP address?

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• I redirected to different Web sites or see pop-ups on Google Chrome

  I redirected to different Web sites or see pop-ups on Google Chrome. Some pages are sponsored (casinos, etc.) and some are very suspicious that I won't fully charge and open.

  I tried to find a malware from my mac, but can't find.

  I have zero parameters of the Google Chrome browser, but which is not helping either.

  I'm out of options! Can I get help and advice please?

  This only happens in Safari or Chrome?

  If this happens only in Chrome, then check your Chrome Extensions. That's all we offer here. I would be reaching out to Google if this issue is only related to the Chrome.

• Apps store using different account

  That's why apps store ask for password of different account rather than the account that has connected to itune for my device?

  Ask when? Whether to download updates of your applications then all applications (and anything else downloaded from iTunes) are linked to the account that downloaded them - then only this account can download updates of its applications (and make in-app purchases in them).

  If when you try to download new try the account record by hitting it to bottom of the tab in the App Store application, close the App Store application via the taskbar of the iPad and then re - open the app and reconnect and try again

• How can I associate different sheets in the same document?

  Hello (and sorry for my English, I hope, you will understand my request),

  Using Excel, I used your link to multiple sheets with one another in the same document, using the "paste special / paste with binding" (not sure of the translation) and then "paste special / format. It's a fantastic tool, which allows me to have different aspects of my master sheet, all being updated automatically as soon as the captain we changed. I have had up to 10 sheets in the same document linked to that of master, each containing what was strictly necessary for each single service, I was working with.

  I know that I can have the same result on numbers with cells, using '=', but is there a way I can do it for a whole sheet?

  Thank you

  frantchoua @ wrote:

  I know that I can have the same result on numbers with cells, using '=', but is there a way I can do it for a whole sheet?

  Try to use = to answer a single cell on the other sheet.  Then copy this formula right and down.  Who should have the same effect as selecting a range in Excel followed edition > paste special > paste with binding.

  SG

• How can I change the sound alarm on Apple Watch for night stand mode?  Light ping is not quite disturbing to wake me up.  Are there different sounds?

  The sound of the alarm on the Apple Watch is not quite disturbing to wake mode bedside table.  Are there different sounds/tones that I choose? Where can I do this? Or y at - it app for Apple Watch Nightstand that will provide different alarm signals?

  Hello

  It is not currently possible to customize ringtones for alarm on Apple Watch.

  If you want Apple to consider adding this option, you can fill out and submit the form here:

  https://www.Apple.com/feedback/watch.html

• synchronization of the RAIDs at 2 different locations

  I recently started to work in 2 different places and must find a way to keep my 15 TB + of the continually changing and growing data (in RAID 0 training photoshop files) practice at both locations at any time.

  My best idea so far is to get a 15 TB portable working drive that I bring with me back and then continue to a RAID of TIME stationary MACHINE at each location who save permanently this portable work in car...

  If anyone has a better idea, please advise.

  Keep your valuable data on a striped RAID is dangerous. Sometimes interlaced RAID adds speed, but in case of disk failure, is likely to result in a total loss of all data without hope of a partial recovery.

  Put data of Time Machine on a mirrored RAID is a loss of readers.

  Time Machine can alternate automatically readers to keep two (or more) independent backup series. Just add the second drive and it automatically alternates.

  As always, you can use AppleRAID or an external RAID enclosure for the construction of a concatenated RAID set that resembles a drive for Mac OS X.

• ICloud will retain any libraries in 2 different accounts (they are named something different). I think I see photos newly learned from my photo (in iphone6) stream appear in both libraries. Thank you.

  I'm syncing of photos by an iphone6 + (latest iOS) to my macbook pro 15 "laptop running El Capitan.

  I have two separate accounts. The second account uses a photo library with a different title (for storage

  different types of photos). New pictures taken on my iPhone are appearing in the second library which is

  No personal photos. How to stop this automatic downloading to library 2. It isn't even the same title

  and is located in another account.

  Thanks in advance...

  JUD

  Library #2, which I assume has a different ID to Apple that the ID that is used for library #1, you can stop upload on iCloud by disabling the iCloud photo library.

• How to use 2 different facebook accounts in el capitian photo

  I want to send my pictures on my account, FB, Photos and

  My wife wants to send his photos on his FB account, I do not see

  where we can choose between our accounts more.

  You will need two accounts to different users on your Mac, one for your wife and the other for you.

  You can select an account Facebook in Photos for a user, so your wife need his own user account, so she can put in place of personal preferences for the Photos.

• Numbers. retrieve different data depending on today's date

  I made a dashboard on numbers 4.0 on MacBook Pro using macOS 10.12.

  I need to display some data from the month, so I need to change every month (extraction of data from a different cell depending on the month). Should what formula/s I use?

  In the column, there is the date of the day, with a total at the end of the month.

  In the lines, I have different categories.

  The dashboard to view the totals for the month in a different tab.

  "I need something like: today check month and retrieves the data of total monthName ' (if necessary)

  Thank you for your help

  Hi sanz,.

  OS X 10.11.5, ' 09 numbers (numbers 4.3, but this willingness to work 3 numbers).

  Not sure about 4 numbers!

  

  Add another column (E) in table 1 (you can hide this column later).

  Formula in table 1 E2 (and fill down)

  = MONTHNAME (MONTH (A2))

  In the second table.

  Formula in A1 = MONTHNAME (MONTH (TODAY ()))

  Formula in A2 = "sum"& A1

  Formula in B2 (fill right) = SUMIF (table 1: $E, $A$ 1, table 1: B).

  Kind regards

  Ian.