port forwarding for file sharing on the internet.

Similar Questions

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Can't see another computer for file sharing

  Hello
  I have 2 computers in my house, a PC running Windows 7 Home Premium x 64 and the other a XP Home Edition SP3 race, both connected to the Internet through a router TL-MR3420 and the adapter TP-LINK TL-WN822N. I have enabled the sharing of files on both computers and have no problem to display all of the files shared between each computer, so far.
  Whenever I try to view another computer via "Network" or "homegroup" menu on 7 (or my network places on XP), I can't see my other computer which is supposed to be there. So far, I've tried a few attempts to analyze and resolve:
  1 ping each other by IP - success.
  2 ping each other by the name of the computer - has failed.
  3. try to access to "- and " run - failed with error 0 x 80070035 - path not found network. ".
  4 run diagnose step above on Windows 7, she returned with a result: "the device or resource (my static IP XP) is not configured to accept connections on port 'The file sharing and printers (SMB)'."
  5 turn off the firewall on the computers and router.
  6. ensure that necessary services for file sharing are active.
  7. the reactivation of the wireless connection on both computers.
  8 change the name of the Working Group on both computers.
  9. run ipconfig/all on both computers.
  10 install this fix on my XP.
  Ipconfig, it seems my two computers showing the active DHCP on 'no', so I changed my network settings to "obtain an IP automatically" she turns to the 'yes' later. And "NetBIOS over TCP/IP", showing the different statutes on 7 that it is activated on XP it is disabled, even though I put it activated via the WINS tab on the XP network settings. Still do not solve the problem.
  I don't know if it means something, but I share also some folders on my 7 to my Tablet ES File Explorer app, it works as it should (as long as I use static IP address), but if I try to connect my tablet to shared folders on XP, it always shows error message on either:
  WiFi is turned off (it is)
  SMB server is out of reach of the network
  The ip address is not valid
  Blocked by the firewall
  SMB service is disabled
  I guess that Wifi, IP and firewall are not the problem, and I don't know about SMB, it's stands for Samba / file Printer Sharing? He has already checked on computer network settings.
  Any help would be greatly appreciated. Thank you.

  I solved this.

  I opened my XP, run these commands via cmd:
  netsh int ip reset resetlog.txt

  netsh winsock reset
  Restart the computer and then change my connection of cable wireless lan then back to wireless again.

• How to remotely wake up Vista for file sharing?

  I need help to wake up my Vista PC mode standby for file sharing application. The PC is connected to a router and I can wake him from sleep mode by pressing a key on the keyboard. In addition, I can wake up the PC for the Logitech Media Server application. I have the Logitech Media Server running on this computer. As soon as I turn on the player (carrier or SB3), the PC wakes up fashion 'sleep'. If the "sleep mode" works well for Logitech Media Server.

  Now, I want to make this PC a NAS. So I need to reactivate it for file sharing applications. I have laptop and a Media Player for a Western Digital that need to access the files on the Vista PC. Please advise on how I can wake the PC for this application.

  Thanks in advance.

  Hello

  I suggest you enable wake up LAN in the BIOS and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-wake-on-LAN-capabilities

  Warning of the BIOS:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• "For Audio/video on the Internet" does not open

  Hi all

  As the title suggests when I click on "for Audio/video on the Internet" nothing happens.  It seems that the icon has also changed.  I tried to look around this problem without success.  I would appreciate any assistance.

  Plaase excuse my ignorance, but it is "for Audio/video on the Internet", a program or command in a browser (maybe an add-on)?  What is doing?  Have you checked that the http://www.microsoft.com/windows/compatibility/windows-vista/Default.aspx Vista Compatibility Center to ensure that the program / module is compatible with Vista and/or Internet Explorer? If so, please provide the web site of the program (link) so we can search more far - I couldn't find using Bing (which is unusual).  The fact that it has an icon indicates it is a program.

  What was the program installed and when its last function properly (and have the correct icon)?  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Right-click on the icon and click Properties.  On the general tab, it's a file with a path - what is this parth?  Go to this path in Windows Explorer and check to see if it exists and if it contains all of the files/programs. If it is there, so we know at least that the program is on the system even if the icon does not work.  Go to the executable main real within the program and create a new shortcut icon and move whenever the icon currently exists and see if this new icon works and it solved the problem.  If this is not the case, try to do a right-click on the icon and click on run as administrator to see if you have a better chance.

  If she isn't here or the procedures above will not work (and it is a program or an add-on), then I suggest you uninstall with Revo http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html and then restart and try reinstalling it.  He may have developed some corrupted files (espcially if the icon has changed) and this may clear up the problem.

  If I'm away from base here, please tell me.  I've never heard of this product before and as I said, I don't find it with Bing, and it is very rare that the programs available.  Please explain what it is and more to hold and, if possible, provide the link of web site (I can download it me to test it and see if I have also the problem - if I have Vista Business, which does not come with Media Center and I suspect that it is associated with, if it's a program).

  I hope this helps and please get back to us with more information so that we can help you better.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I connect my Cruz Tablet for my connection to the internet the computer?

  Original title: How can I connect to my cruz Tablet

  How can I connect my Tablet cruz for my connection to the internet the computer

  Hello

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the model of the Cruz tablet number?

  2. How do you access Internet for your computer? It is through a wired connection or wireless?

  Follow the steps below:

  a. connect a network cable to the tablet computer if the Tablet has a network card. High-speed modems have an output connection to which you connect the network cable and then connect it to a computer or router.

  b. display wireless networks in network settings options. Select a wireless network, and then click on connect. In the areas of Wi - Fi hotspot, you may need to open a Web page to accept the terms of the license before plugging in.

  c. sign to a computer network or a network mobile broadband. Some tablet computers have connections to data network integrated such as the type that personal digital assistants (PDAS) and the use of cell phones. You need to register for an account with the provider of service associated with the integrated network. Alternatively, you can sign up for broadband wireless services and to access broadband that plugs into a USB port with an adapter.

  For more information, please communicate with the link below:

   

  http://www.velocitymicro.com/SupportPage.php

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• Windows Media Player cannot play the file. If the file is on the Internet...

  I get this error message.    Windows Media Player cannot play the file. If the file is on the Internet, connect to the Internet. If the file is on a removable storage card, insert the storage card.

  I would be grateful for any help.

  I get this error message.    Windows Media Player cannot play the file. If the file is on the Internet, connect to the Internet. If the file is on a removable storage card, insert the storage card.
   
  I would be grateful for any help.

  Uninstall all Plugins Internet (RealPlayer, Quicktime, Adobe Flash Player, Adobe Shockwave Player, Adobe Air, Microsoft Silverlight, K-lite codec pack, etc.) of your computer.
   
  Turn it back on.
   
  Reset Internet Explorer default.  If used, reset the default values for Firefox.
  [Note: If you don't have any other browsers installed at that time, taste.]  Mozilla Firefox, Google Chrome and Opera are decent.
   
  Turn it back on.

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Turn it back on.
   
  Install Adobe Flash Player (in Internet Explorer and Firefox separately) and Microsoft Silverlight.  Remember to UNCHECK all the boxes to install other software with them.  Install the BASE K-Lite Codec Pack.
   
  Turn it back on.
   
  Try again.  Return to report problems as you have by following the instructions, if you have noticed performance increase in other ways after completing the steps, anything found scanning, if your problem is resolved, etc.  Just to come back and let everyone know how all this happened!

• PDF files downloaded from the Internet, record of error

  Hello

  Files PDF that is downloaded from the internet is put in error while it is stored in one location. He says: "disk you save or the disk used for temporary files is full. We checked its fine all permission. This is not the case for all Seems PDFs. as occurs only for the PDF files downloaded from the internet. Tried all the quick fixes available on the internet, but still of no use. As disabling protected view/view pdf in the browser. Problem is still not resolved. Please help me with this.

  OK, this photo shows that, for this file in particular, he arrived without security (she won't say "SECURE").

  My money is on the files actually being assured, rather than to be wrong in Acrobat.

  That leaves two main possibilities.

  1. all the files you want to secure. It is now a very common practice. If the files are public we could take a look; If not, you could ask the creators.

  2. you have certain processes in your organization that adds security for downloaded files. That seems unlikely, but it is not impossible. And the fact that it didn't happen in the cases we have tested suggests that it is not done universally.

• Search for files by using the Start button

  I've lost the ability to search for files by using the Start button.  I can enter a file name, but always get a response "nothing found".  I know I did something back a couple of weeks, but don't know what I did to turn it off. Help!

  Thank you!

  Take a look at my search installation tips.  If you are in these settings, you can make sure search is enabled and if necessary you can use the 'reconstruction' of the for button to rebuild your search system.

  http://Skeene.NET/tech/boost-Windows-search-in-two-steps/

  Also, there is an automated troubleshooting tool that tries to find and fix any problems with your search system.  You can go for it here:

  http://support.Microsoft.com/mats/windows_search/

• I bought the Adobe Photoshop CS5 and Lightroom 3 on a CD. However, I now have a 3 Surface Pro who does not have a CD player. Please give me a way for software downloaded from the internet. Thank you.

  I bought the Adobe Photoshop CS5 and Lightroom 3 on a CD. However, I now have a 3 Surface Pro who does not have a CD player. Please give me a way for software downloaded from the internet. Thank you.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  IF Windows 10 read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Create users specifically for file sharing, to hide the login screen

  I would like to create a user that will be used by remote computers to connect with to access shared folders and files. I have already created a user in the computer management screen, even if this user now appears on my login screen.

  How can I get for this user account is not the screen, and it is accessible only by machines on my network?

  I use Windows Vista SP2 Ultimate 64-bit.

  I guess you know what you're doing and have a contingency plan for when things go wrong.

  There are various buttons shown on the Internet, the most used is

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\
  Winlogon\SpecialAccounts\UserList

  There is a Reg command in this article that you can modify to apply the change.

  http://blog.stealthpuppy.com/Windows/hiding-the-vmware_user-account-in-Windows-7/

  http://www.theeldergeek.com/create_hidden_user_account.htm

  http://www.bing.com/search?q=SpecialAccounts%5CUserList&form=IE8SRC&src=IE-searchbox

• Port forwarding for the suddenly closed Linksys router

  I have a 54G wireless router... correctly port forwarded a request of a CPU (server)... but after no connection made by the user on the server... it suddenly close the application... so what I did is to reboot the router in order to refresh the connection...

  Are there other ways to fix this sudden closure of ports?  so that I would more restarts on my router

  I appreciate a lot of help...

  As directed by your statement the port that you have passed on the closed router without any connection to the server is unusual. Please make sure that you have configured an IP address static (outside the range of the router DHCP) on your server and put the same IP address for the specific port port forwarding tab.

  In addition, reduce the MTU size on the router to 1400. See the link below on how to make the changes in the MTU size.

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=c018b947b8774e54bd57fad02e3efddd_17331.XML&PID=80&...